Commit 025791d5 authored by Hirokazu Takata's avatar Hirokazu Takata Committed by Linus Torvalds

[PATCH] m32r: upgrade to 2.6.8.1 kernel

Here is a patch for 2.6.8.1 kernel of Renesas M32R processor.
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent a731b47f
......@@ -25,6 +25,8 @@ aflags-$(CONFIG_ISA_M32R) += -DNO_FPU -Wa,-no-bitinst
CFLAGS += $(cflags-y)
AFLAGS += $(aflags-y)
CHECK := $(CHECK) -D__m32r__=1
head-y := arch/m32r/kernel/head.o arch/m32r/kernel/init_task.o
LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
......
......@@ -10,7 +10,6 @@ CONFIG_GENERIC_ISA_DMA=y
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
......@@ -20,6 +19,7 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
......@@ -52,6 +52,7 @@ CONFIG_KMOD=y
# CONFIG_PLAT_MAPPI is not set
# CONFIG_PLAT_USRV is not set
CONFIG_PLAT_M32700UT=y
# CONFIG_PLAT_OPSPUT is not set
# CONFIG_PLAT_OAKS32R is not set
# CONFIG_PLAT_MAPPI2 is not set
CONFIG_CHIP_M32700=y
......@@ -83,6 +84,7 @@ CONFIG_PREEMPT=y
CONFIG_M32R_CFC=y
CONFIG_M32700UT_CFC=y
CONFIG_CFC_NUM=1
# CONFIG_MTD_M32R is not set
CONFIG_M32R_SMC91111=y
CONFIG_M32700UT_DS1302=y
......@@ -121,6 +123,8 @@ CONFIG_BINFMT_ELF=y
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
......@@ -157,6 +161,7 @@ CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=y
......@@ -234,7 +239,6 @@ CONFIG_SCSI_MULTI_LUN=y
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
......@@ -286,13 +290,13 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -335,7 +339,7 @@ CONFIG_INPUT=y
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
......@@ -385,12 +389,10 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
......@@ -405,6 +407,11 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
......@@ -422,11 +429,12 @@ CONFIG_VIDEO_DEV=y
# Video Adapters
#
# CONFIG_VIDEO_CPIA is not set
CONFIG_M32R_AR=y
CONFIG_M32R_AR_VGA=y
#
# Radio Adapters
#
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
#
......@@ -484,6 +492,7 @@ CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
......@@ -491,6 +500,8 @@ CONFIG_UDF_FS=m
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
......@@ -578,6 +589,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -618,5 +630,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
......@@ -72,7 +72,7 @@
static const char version[] =
"SMSC LAN91C111 Driver (v2.0), (Linux Kernel 2.4 + Support for Odd Byte) 09/24/01 - by Pramod Bhardwaj (pramod.bhardwaj@smsc.com)\n\n";
"SMSC LAN91C111 Driver (v2.0), (Linux Kernel 2.4 + Support for Odd Byte) 09/24/01 - by Pramod Bhardwaj (pramod.bhardwaj@smsc.com)\n";
#ifdef MODULE
#include <linux/module.h>
......@@ -398,12 +398,12 @@ static irqreturn_t smc_interrupt(int irq, void *, struct pt_regs *regs);
. This is a separate procedure to handle the receipt of a packet, to
. leave the interrupt code looking slightly cleaner
*/
inline static void smc_rcv( struct net_device *dev );
static inline void smc_rcv( struct net_device *dev );
/*
. This handles a TX interrupt, which is only called when an error
. relating to a packet is sent.
*/
inline static void smc_tx( struct net_device * dev );
static inline void smc_tx( struct net_device * dev );
/*
. This handles interrupts generated from PHY register 18
......@@ -1697,7 +1697,7 @@ static irqreturn_t smc_interrupt(int irq, void * dev_id, struct pt_regs * regs)
. o otherwise, read in the packet
--------------------------------------------------------------
*/
static void smc_rcv(struct net_device *dev)
static inline void smc_rcv(struct net_device *dev)
{
struct smc_local *lp = (struct smc_local *)dev->priv;
int ioaddr = dev->base_addr;
......@@ -1777,7 +1777,6 @@ static void smc_rcv(struct net_device *dev)
data = skb_put( skb, packet_length + 1 );
else
data = skb_put( skb, packet_length);
}
else
{
......@@ -1850,7 +1849,7 @@ static void smc_rcv(struct net_device *dev)
. ( resend? Not really, since we don't want old packets around )
. Restore saved values
************************************************************************/
static void smc_tx( struct net_device * dev )
static inline void smc_tx( struct net_device * dev )
{
int ioaddr = dev->base_addr;
struct smc_local *lp = (struct smc_local *)dev->priv;
......@@ -2156,7 +2155,7 @@ static const char smc_info_string[] =
. Sysctl handler for all integer parameters
.-------------------------------------------------------------*/
static int smc_sysctl_handler(ctl_table *ctl, int write, struct file * filp,
void *buffer, size_t *lenp)
void *buffer, size_t *lenp, loff_t *ppos)
{
struct net_device *dev = (struct net_device*)ctl->extra1;
struct smc_local *lp = (struct smc_local *)ctl->extra2;
......@@ -2385,7 +2384,7 @@ static int smc_sysctl_handler(ctl_table *ctl, int write, struct file * filp,
val = *valp;
// Perform the generic integer operation
if ((ret = proc_dointvec(ctl, write, filp, buffer, lenp)) != 0)
if ((ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos)) != 0)
return(ret);
// Write changes out to the registers
......@@ -3817,8 +3816,7 @@ static void smc_phy_interrupt(struct net_device* dev)
PRINTK2("%s: smc_phy_interrupt\n", dev->name);
while (1)
{
while (1) {
// Read PHY Register 18, Status Output
phy18 = smc_read_phy_register(ioaddr, phyaddr, PHY_INT_REG);
......
......@@ -6,6 +6,7 @@
#include <linux/init.h>
#include <linux/init_task.h>
#include <linux/fs.h>
#include <linux/mqueue.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
......
......@@ -49,7 +49,6 @@
#include <asm/system.h>
#include <asm/bitops.h>
#include <asm/uaccess.h>
#include <asm/pgalloc.h>
#include <asm/delay.h>
#include <asm/irq.h>
......@@ -555,7 +554,7 @@ int request_irq(unsigned int irq,
action->handler = handler;
action->flags = irqflags;
action->mask = 0;
cpus_clear(action->mask);
action->name = devname;
action->next = NULL;
action->dev_id = dev_id;
......@@ -997,7 +996,7 @@ void init_irq_proc (void)
int i;
/* create /proc/irq */
root_irq_dir = proc_mkdir("irq", 0);
root_irq_dir = proc_mkdir("irq", NULL);
/* create /proc/irq/prof_cpu_mask */
entry = create_proc_entry("prof_cpu_mask", 0600, root_irq_dir);
......
......@@ -31,7 +31,7 @@ void *module_alloc(unsigned long size)
{
if (size == 0)
return NULL;
return vmalloc(size);
return vmalloc_exec(size);
}
......
......@@ -69,11 +69,21 @@ struct screen_info screen_info = {
extern int root_mountflags;
static char command_line[COMMAND_LINE_SIZE] = { 0 };
char saved_command_line[COMMAND_LINE_SIZE];
static char command_line[COMMAND_LINE_SIZE];
static struct resource code_resource = { "Kernel code", 0x100000, 0 };
static struct resource data_resource = { "Kernel data", 0, 0 };
static struct resource data_resource = {
.name = "Kernel data",
.start = 0,
.end = 0,
.flags = IORESOURCE_BUSY | IORESOURCE_MEM
};
static struct resource code_resource = {
.name = "Kernel code",
.start = 0,
.end = 0,
.flags = IORESOURCE_BUSY | IORESOURCE_MEM
};
unsigned long memory_start;
unsigned long memory_end;
......@@ -282,7 +292,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
unsigned long cpu = c - cpu_data;
#ifdef CONFIG_SMP
if (!(cpu_online_map & (1 << cpu)))
if (!cpu_online(cpu))
return 0;
#endif /* CONFIG_SMP */
......
......@@ -53,7 +53,7 @@ static struct call_data_struct *call_data;
* For flush_cache_all()
*/
static spinlock_t flushcache_lock = SPIN_LOCK_UNLOCKED;
static volatile unsigned long flushcache_cpumask;
static volatile unsigned long flushcache_cpumask = 0;
/*
* For flush_tlb_others()
......@@ -88,7 +88,7 @@ void smp_flush_tlb_mm(struct mm_struct *);
void smp_flush_tlb_range(struct vm_area_struct *, unsigned long, \
unsigned long);
void smp_flush_tlb_page(struct vm_area_struct *, unsigned long);
static void flush_tlb_others(unsigned long, struct mm_struct *,
static void flush_tlb_others(cpumask_t, struct mm_struct *,
struct vm_area_struct *, unsigned long);
void smp_invalidate_interrupt(void);
......@@ -130,7 +130,7 @@ unsigned long send_IPI_mask_phys(cpumask_t, int, int);
*==========================================================================*/
void smp_send_reschedule(int cpu_id)
{
send_IPI_mask(1 << cpu_id, RESCHEDULE_IPI, 1);
send_IPI_mask(cpumask_of_cpu(cpu_id), RESCHEDULE_IPI, 1);
}
/*==========================================================================*
......@@ -177,15 +177,18 @@ void smp_reschedule_interrupt(void)
void smp_flush_cache_all(void)
{
cpumask_t cpumask;
unsigned long *mask;
preempt_disable();
cpumask = 1UL << smp_processor_id();
cpumask = cpu_online_map & ~cpumask;
cpumask = cpu_online_map;
cpu_clear(smp_processor_id(), cpumask);
spin_lock(&flushcache_lock);
atomic_set_mask(cpumask, (atomic_t *)&flushcache_cpumask);
mask=cpus_addr(cpumask);
atomic_set_mask(*mask, (atomic_t *)&flushcache_cpumask);
send_IPI_mask(cpumask, INVALIDATE_CACHE_IPI, 0);
_flush_cache_copyback_all();
while (flushcache_cpumask);
while (flushcache_cpumask)
mb();
spin_unlock(&flushcache_lock);
preempt_enable();
}
......@@ -271,11 +274,14 @@ static void flush_tlb_all_ipi(void *info)
void smp_flush_tlb_mm(struct mm_struct *mm)
{
int cpu_id = smp_processor_id();
cpumask_t cpu_mask = mm->cpu_vm_mask & ~(1 << cpu_id);
cpumask_t cpu_mask;
unsigned long *mmc = &mm->context[cpu_id];
unsigned long flags;
preempt_disable();
cpu_mask = mm->cpu_vm_mask;
cpu_clear(cpu_id, cpu_mask);
if (*mmc != NO_CONTEXT) {
local_irq_save(flags);
*mmc = NO_CONTEXT;
......@@ -285,7 +291,7 @@ void smp_flush_tlb_mm(struct mm_struct *mm)
cpu_clear(cpu_id, mm->cpu_vm_mask);
local_irq_restore(flags);
}
if (cpu_mask)
if (!cpus_empty(cpu_mask))
flush_tlb_others(cpu_mask, mm, NULL, FLUSH_ALL);
preempt_enable();
......@@ -336,11 +342,14 @@ void smp_flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
{
struct mm_struct *mm = vma->vm_mm;
int cpu_id = smp_processor_id();
cpumask_t cpu_mask = mm->cpu_vm_mask & ~(1 << cpu_id);
cpumask_t cpu_mask;
unsigned long *mmc = &mm->context[cpu_id];
unsigned long flags;
preempt_disable();
cpu_mask = mm->cpu_vm_mask;
cpu_clear(cpu_id, cpu_mask);
#ifdef DEBUG_SMP
if (!mm)
BUG();
......@@ -353,7 +362,7 @@ void smp_flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
__flush_tlb_page(va);
local_irq_restore(flags);
}
if (cpu_mask)
if (!cpus_empty(cpu_mask))
flush_tlb_others(cpu_mask, mm, vma, va);
preempt_enable();
......@@ -385,6 +394,8 @@ void smp_flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
struct vm_area_struct *vma, unsigned long va)
{
cpumask_t tmp;
unsigned long *mask;
#ifdef DEBUG_SMP
unsigned long flags;
__save_flags(flags);
......@@ -399,14 +410,12 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
* - current CPU must not be in mask
* - mask must exist :)
*/
if (!cpumask)
BUG();
if ((cpumask & cpu_online_map) != cpumask)
BUG();
if (cpumask & (1 << smp_processor_id()))
BUG();
if (!mm)
BUG();
BUG_ON(cpus_empty(cpumask));
cpus_and(tmp, cpumask, cpu_online_map);
BUG_ON(!cpus_equal(cpumask, tmp));
BUG_ON(cpu_isset(smp_processor_id(), cpumask));
BUG_ON(!mm);
/*
* i'm not happy about this global shared spinlock in the
......@@ -419,8 +428,8 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
flush_mm = mm;
flush_vma = vma;
flush_va = va;
atomic_set_mask(cpumask, (atomic_t *)&flush_cpumask);
mask=cpus_addr(cpumask);
atomic_set_mask(*mask, (atomic_t *)&flush_cpumask);
/*
* We have to send the IPI only to
......@@ -428,8 +437,9 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
*/
send_IPI_mask(cpumask, INVALIDATE_TLB_IPI, 0);
while (flush_cpumask)
/* nothing. lockup detection does not belong here */;
while (!cpus_empty(flush_cpumask))
/* nothing. lockup detection does not belong here */
mb();
flush_mm = NULL;
flush_vma = NULL;
......@@ -483,7 +493,7 @@ void smp_invalidate_interrupt(void)
}
/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
/* Stop CPU reequest Routins */
/* Stop CPU request Routins */
/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
/*==========================================================================*
......@@ -606,7 +616,8 @@ int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
spin_lock(&call_lock);
call_data = &data;
wmb();
mb();
/* Send a message to all other CPUs and wait for them to respond */
send_IPI_allbutself(CALL_FUNCTION_IPI, 0);
......@@ -657,6 +668,7 @@ void smp_call_function_interrupt(void)
irq_enter();
(*func)(info);
irq_exit();
if (wait) {
mb();
atomic_inc(&call_data->finished);
......@@ -797,7 +809,10 @@ void smp_local_timer_interrupt(struct pt_regs *regs)
*==========================================================================*/
void send_IPI_allbutself(int ipi_num, int try)
{
cpumask_t cpumask = (cpu_online_map & ~(1 << smp_processor_id()));
cpumask_t cpumask;
cpumask = cpu_online_map;
cpu_clear(smp_processor_id(), cpumask);
send_IPI_mask(cpumask, ipi_num, try);
}
......@@ -824,21 +839,21 @@ void send_IPI_allbutself(int ipi_num, int try)
*==========================================================================*/
static void send_IPI_mask(cpumask_t cpumask, int ipi_num, int try)
{
cpumask_t physid_mask;
cpumask_t physid_mask, tmp;
int cpu_id, phys_id;
int num_cpus = num_online_cpus();
if (num_cpus <= 1) /* NO MP */
return;
if ((cpumask & cpu_online_map) != cpumask) /* include not online CPU */
BUG();
cpus_and(tmp, cpumask, cpu_online_map);
BUG_ON(!cpus_equal(cpumask, tmp));
physid_mask = 0;
for (cpu_id = 0 ; cpu_id < num_cpus ; cpu_id++)
if (cpumask & (1 << cpu_id))
physid_mask = CPU_MASK_NONE;
for_each_cpu_mask(cpu_id, cpumask){
if ((phys_id = cpu_to_physid(cpu_id)) != -1)
cpu_set(phys_id, physid_mask);
}
send_IPI_mask_phys(physid_mask, ipi_num, try);
}
......@@ -870,14 +885,16 @@ unsigned long send_IPI_mask_phys(cpumask_t physid_mask, int ipi_num,
unsigned long flags = 0;
volatile unsigned long *ipicr_addr;
unsigned long ipicr_val;
cpumask_t my_physid_mask;
unsigned long my_physid_mask;
unsigned long mask = cpus_addr(physid_mask)[0];
if (physid_mask & ~phys_cpu_present_map)
if (mask & ~physids_coerce(phys_cpu_present_map))
BUG();
if (ipi_num >= NR_IPIS)
BUG();
physid_mask <<= IPI_SHIFT;
mask <<= IPI_SHIFT;
ipilock = &ipi_lock[ipi_num];
ipicr_addr = (volatile unsigned long *)(M32R_ICU_IPICR_ADDR
+ (ipi_num << 2));
......@@ -927,7 +944,7 @@ unsigned long send_IPI_mask_phys(cpumask_t physid_mask, int ipi_num,
"st r4, @%2 \n\t"
: "=&r"(ipicr_val)
: "r"(flags), "r"(&ipilock->lock), "r"(ipicr_addr),
"r"(physid_mask), "r"(try), "r"(my_physid_mask)
"r"(mask), "r"(try), "r"(my_physid_mask)
: "memory", "r4"
#ifdef CONFIG_CHIP_M32700_TS1
, "r5"
......
......@@ -61,7 +61,7 @@
#endif
extern int cpu_idle(void);
extern unsigned long cpu_initialized;
extern cpumask_t cpu_initialized;
/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
/* Data structures and variables */
......@@ -71,7 +71,7 @@ extern unsigned long cpu_initialized;
static unsigned int bsp_phys_id = -1;
/* Bitmask of physically existing CPUs */
cpumask_t phys_cpu_present_map;
physid_mask_t phys_cpu_present_map;
/* Bitmask of currently online CPUs */
cpumask_t cpu_online_map;
......@@ -142,7 +142,7 @@ static void unmap_cpu_to_physid(int, int);
void __devinit smp_prepare_boot_cpu(void)
{
bsp_phys_id = hard_smp_processor_id();
cpu_set(bsp_phys_id, phys_cpu_present_map);
physid_set(bsp_phys_id, phys_cpu_present_map);
cpu_set(0, cpu_online_map); /* BSP's cpu_id == 0 */
cpu_set(0, cpu_callout_map);
cpu_set(0, cpu_callin_map);
......@@ -184,7 +184,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
goto smp_done;
}
for (phys_id = 0 ; phys_id < nr_cpu ; phys_id++)
cpu_set(phys_id, phys_cpu_present_map);
physid_set(phys_id, phys_cpu_present_map);
show_mp_info(nr_cpu);
......@@ -207,7 +207,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
/*
* Now scan the CPU present map and fire up the other CPUs.
*/
Dprintk("CPU present map : %lx\n", phys_cpu_present_map);
Dprintk("CPU present map : %lx\n", physids_coerce(phys_cpu_present_map));
for (phys_id = 0 ; phys_id < NR_CPUS ; phys_id++) {
/*
......@@ -216,7 +216,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
if (phys_id == bsp_phys_id)
continue;
if (!cpu_isset(phys_id, phys_cpu_present_map))
if (!physid_isset(phys_id, phys_cpu_present_map))
continue;
if ((max_cpus >= 0) && (max_cpus <= cpucount + 1))
......@@ -228,7 +228,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
* Make sure we unmap all failed CPUs
*/
if (physid_to_cpu(phys_id) == -1) {
cpu_clear(phys_id, phys_cpu_present_map);
physid_clear(phys_id, phys_cpu_present_map);
printk("phys CPU#%d not responding - " \
"cannot use it.\n", phys_id);
}
......@@ -329,7 +329,7 @@ static void __init do_boot_cpu(int phys_id)
cpu_set(phys_id, cpu_bootout_map);
/* Send Startup IPI */
send_IPI_mask_phys((1 << phys_id), CPU_BOOT_IPI, 0);
send_IPI_mask_phys(cpumask_of_cpu(phys_id), CPU_BOOT_IPI, 0);
Dprintk("Waiting for send to finish...\n");
timeout = 0;
......@@ -405,11 +405,11 @@ void __init smp_cpus_done(unsigned int max_cpus)
unsigned long bogosum = 0;
for (timeout = 0; timeout < 5000; timeout++) {
if (cpu_callin_map == cpu_online_map)
if (cpus_equal(cpu_callin_map, cpu_online_map))
break;
udelay(1000);
}
if (cpu_callin_map != cpu_online_map)
if (!cpus_equal(cpu_callin_map, cpu_online_map))
BUG();
for (cpu_id = 0 ; cpu_id < num_online_cpus() ; cpu_id++)
......@@ -420,8 +420,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
*/
Dprintk("Before bogomips.\n");
if (cpucount) {
for (cpu_id = 0 ; cpu_id < NR_CPUS ; cpu_id++)
if (cpu_online_map & (1 << cpu_id))
for_each_cpu_mask(cpu_id, cpu_online_map)
bogosum += cpu_data[cpu_id].loops_per_jiffy;
printk(KERN_INFO "Total of %d processors activated " \
......
......@@ -195,7 +195,7 @@ asmlinkage int sys_ipc(uint call, int first, int second,
union semun fourth;
if (!ptr)
return -EINVAL;
if (get_user(fourth.__pad, (void * __user *) ptr))
if (get_user(fourth.__pad, (void __user * __user *) ptr))
return -EFAULT;
return sys_semctl (first, second, third, fourth);
}
......
......@@ -248,8 +248,8 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
return IRQ_HANDLED;
}
struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, 0, "MFT2", NULL,
NULL };
struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE,
"MFT2", NULL, NULL };
void __init time_init(void)
{
......
......@@ -185,7 +185,7 @@ void show_trace(struct task_struct *task, unsigned long *stack)
printk("Call Trace: ");
while (!kstack_end(stack)) {
addr = *stack++;
if (kernel_text_address(addr)) {
if (__kernel_text_address(addr)) {
printk("[<%08lx>] ", addr);
print_symbol("%s\n", addr);
}
......@@ -331,7 +331,7 @@ asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
info.si_signo = signr; \
info.si_errno = 0; \
info.si_code = sicode; \
info.si_addr = (void *)siaddr; \
info.si_addr = (void __user *)siaddr; \
do_trap(trapnr, signr, str, regs, error_code, &info); \
}
......
......@@ -115,10 +115,12 @@ void __const_udelay(unsigned long xloops)
__delay(xloops * HZ);
}
/*
* 4294 = 2^32 / 10^6
*/
void __udelay(unsigned long usecs)
{
__const_udelay(usecs * 4294UL);
__const_udelay(usecs * 0x000010c7); /* 2**32 / 1000000 (rounded up) */
}
void __ndelay(unsigned long nsecs)
{
__const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
}
......@@ -10,7 +10,6 @@ CONFIG_GENERIC_ISA_DMA=y
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
#
# General setup
......@@ -19,6 +18,7 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=15
......@@ -52,6 +52,7 @@ CONFIG_STOP_MACHINE=y
# CONFIG_PLAT_MAPPI is not set
# CONFIG_PLAT_USRV is not set
CONFIG_PLAT_M32700UT=y
# CONFIG_PLAT_OPSPUT is not set
# CONFIG_PLAT_OAKS32R is not set
# CONFIG_PLAT_MAPPI2 is not set
CONFIG_CHIP_M32700=y
......@@ -86,6 +87,7 @@ CONFIG_NR_CPUS=2
CONFIG_M32R_CFC=y
CONFIG_M32700UT_CFC=y
CONFIG_CFC_NUM=1
# CONFIG_MTD_M32R is not set
CONFIG_M32R_SMC91111=y
CONFIG_M32700UT_DS1302=y
......@@ -124,6 +126,8 @@ CONFIG_BINFMT_ELF=y
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
......@@ -160,6 +164,7 @@ CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=y
......@@ -237,7 +242,6 @@ CONFIG_SCSI_MULTI_LUN=y
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
......@@ -289,13 +293,13 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -390,7 +394,6 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
......@@ -409,6 +412,11 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
......@@ -426,11 +434,12 @@ CONFIG_VIDEO_DEV=y
# Video Adapters
#
# CONFIG_VIDEO_CPIA is not set
CONFIG_M32R_AR=y
CONFIG_M32R_AR_VGA=y
#
# Radio Adapters
#
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
#
......@@ -452,7 +461,6 @@ CONFIG_FB_EPSON_S1D13806=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
......@@ -511,6 +519,7 @@ CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
......@@ -518,6 +527,8 @@ CONFIG_UDF_FS=m
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
......@@ -605,6 +616,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -645,5 +657,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
......@@ -10,7 +10,6 @@ CONFIG_GENERIC_ISA_DMA=y
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
......@@ -20,6 +19,7 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
......@@ -52,6 +52,7 @@ CONFIG_KMOD=y
# CONFIG_PLAT_MAPPI is not set
# CONFIG_PLAT_USRV is not set
CONFIG_PLAT_M32700UT=y
# CONFIG_PLAT_OPSPUT is not set
# CONFIG_PLAT_OAKS32R is not set
# CONFIG_PLAT_MAPPI2 is not set
CONFIG_CHIP_M32700=y
......@@ -83,6 +84,7 @@ CONFIG_PREEMPT=y
CONFIG_M32R_CFC=y
CONFIG_M32700UT_CFC=y
CONFIG_CFC_NUM=1
# CONFIG_MTD_M32R is not set
CONFIG_M32R_SMC91111=y
CONFIG_M32700UT_DS1302=y
......@@ -121,6 +123,8 @@ CONFIG_BINFMT_ELF=y
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
......@@ -157,6 +161,7 @@ CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=y
......@@ -234,7 +239,6 @@ CONFIG_SCSI_MULTI_LUN=y
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
......@@ -286,13 +290,13 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -335,7 +339,7 @@ CONFIG_INPUT=y
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
......@@ -387,12 +391,10 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
......@@ -407,6 +409,11 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
......@@ -424,11 +431,12 @@ CONFIG_VIDEO_DEV=y
# Video Adapters
#
# CONFIG_VIDEO_CPIA is not set
CONFIG_M32R_AR=y
CONFIG_M32R_AR_VGA=y
#
# Radio Adapters
#
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
#
......@@ -450,7 +458,6 @@ CONFIG_FB_EPSON_S1D13806=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
......@@ -509,6 +516,7 @@ CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
......@@ -516,6 +524,8 @@ CONFIG_UDF_FS=m
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
......@@ -603,6 +613,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -643,5 +654,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
......@@ -10,15 +10,14 @@ CONFIG_GENERIC_ISA_DMA=y
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
......@@ -51,6 +50,7 @@ CONFIG_KMOD=y
CONFIG_PLAT_MAPPI=y
# CONFIG_PLAT_USRV is not set
# CONFIG_PLAT_M32700UT is not set
# CONFIG_PLAT_OPSPUT is not set
# CONFIG_PLAT_OAKS32R is not set
# CONFIG_PLAT_MAPPI2 is not set
CONFIG_CHIP_M32700=y
......@@ -116,6 +116,8 @@ CONFIG_BINFMT_FLAT=y
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
......@@ -165,7 +167,6 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
......@@ -217,13 +218,13 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -266,7 +267,7 @@ CONFIG_INPUT=y
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
......@@ -316,12 +317,10 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
......@@ -331,6 +330,11 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
......@@ -389,7 +393,8 @@ CONFIG_EXT2_FS=y
#
# DOS/FAT/NT Filesystems
#
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
......@@ -478,6 +483,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -518,5 +524,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
......@@ -10,7 +10,6 @@ CONFIG_GENERIC_ISA_DMA=y
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
# CONFIG_STANDALONE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
......@@ -54,6 +53,7 @@ CONFIG_STOP_MACHINE=y
CONFIG_PLAT_MAPPI=y
# CONFIG_PLAT_USRV is not set
# CONFIG_PLAT_M32700UT is not set
# CONFIG_PLAT_OPSPUT is not set
# CONFIG_PLAT_OAKS32R is not set
# CONFIG_PLAT_MAPPI2 is not set
CONFIG_CHIP_M32700=y
......@@ -124,6 +124,8 @@ CONFIG_BINFMT_ELF=y
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
......@@ -134,6 +136,8 @@ CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_REDBOOT_PARTS=y
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
#
......@@ -150,6 +154,16 @@ CONFIG_MTD_BLOCK=y
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
......@@ -164,6 +178,7 @@ CONFIG_MTD_BLOCK=y
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
......@@ -208,6 +223,7 @@ CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=m
......@@ -294,13 +310,13 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -396,12 +412,10 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
......@@ -416,6 +430,11 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
......@@ -476,9 +495,11 @@ CONFIG_ISO9660_FS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
......@@ -508,9 +529,14 @@ CONFIG_RAMFS=y
# CONFIG_EFS_FS is not set
CONFIG_JFFS_FS=y
CONFIG_JFFS_FS_VERBOSE=0
CONFIG_JFFS_PROC_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_NAND is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
......@@ -572,6 +598,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -612,6 +639,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
......
......@@ -10,7 +10,6 @@ CONFIG_GENERIC_ISA_DMA=y
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
# CONFIG_STANDALONE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
......@@ -53,6 +52,7 @@ CONFIG_KMOD=y
CONFIG_PLAT_MAPPI=y
# CONFIG_PLAT_USRV is not set
# CONFIG_PLAT_M32700UT is not set
# CONFIG_PLAT_OPSPUT is not set
# CONFIG_PLAT_OAKS32R is not set
# CONFIG_PLAT_MAPPI2 is not set
CONFIG_CHIP_M32700=y
......@@ -120,6 +120,8 @@ CONFIG_BINFMT_ELF=y
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
......@@ -130,6 +132,8 @@ CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_REDBOOT_PARTS=y
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
#
......@@ -146,6 +150,16 @@ CONFIG_MTD_BLOCK=y
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
......@@ -160,6 +174,7 @@ CONFIG_MTD_BLOCK=y
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
......@@ -204,6 +219,7 @@ CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=m
......@@ -290,13 +306,13 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -392,12 +408,10 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
......@@ -412,6 +426,11 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
......@@ -472,9 +491,11 @@ CONFIG_ISO9660_FS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
......@@ -504,9 +525,14 @@ CONFIG_RAMFS=y
# CONFIG_EFS_FS is not set
CONFIG_JFFS_FS=y
CONFIG_JFFS_FS_VERBOSE=0
CONFIG_JFFS_PROC_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_NAND is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
......@@ -568,6 +594,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -608,6 +635,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
......
......@@ -31,7 +31,6 @@
#include <asm/m32r.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/pgalloc.h>
#include <asm/hardirq.h>
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
......@@ -142,7 +141,27 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code,
if (in_atomic() || !mm)
goto bad_area_nosemaphore;
/* When running in the kernel we expect faults to occur only to
* addresses in user space. All other faults represent errors in the
* kernel and should generate an OOPS. Unfortunatly, in the case of an
* erroneous fault occuring in a code path which already holds mmap_sem
* we will deadlock attempting to validate the fault against the
* address space. Luckily the kernel only validly references user
* space from well defined areas of code, which are listed in the
* exceptions table.
*
* As the vast majority of faults will be valid we will only perform
* the source reference check when there is a possibilty of a deadlock.
* Attempt to lock the address space, if we cannot we then validate the
* source. If this is invalid we can skip the address space check,
* thus avoiding the deadlock.
*/
if (!down_read_trylock(&mm->mmap_sem)) {
if ((error_code & 4) == 0 &&
!search_exception_tables(regs->psw))
goto bad_area_nosemaphore;
down_read(&mm->mmap_sem);
}
vma = find_vma(mm, address);
if (!vma)
......@@ -227,7 +246,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code,
info.si_signo = SIGSEGV;
info.si_errno = 0;
/* info.si_code has been set above */
info.si_addr = (void *)address;
info.si_addr = (void __user *)address;
force_sig_info(SIGSEGV, &info, tsk);
return;
}
......@@ -293,7 +312,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code,
info.si_signo = SIGBUS;
info.si_errno = 0;
info.si_code = BUS_ADRERR;
info.si_addr = (void *)address;
info.si_addr = (void __user *)address;
force_sig_info(SIGBUS, &info, tsk);
return;
......
......@@ -47,7 +47,7 @@ void show_mem(void)
printk("Mem-info:\n");
show_free_areas();
printk("Free swap: %6dkB\n",nr_swap_pages<<(PAGE_SHIFT-10));
printk("Free swap: %6ldkB\n",nr_swap_pages<<(PAGE_SHIFT-10));
for_each_pgdat(pgdat) {
for (i = 0; i < pgdat->node_spanned_pages; ++i) {
page = pgdat->node_mem_map + i;
......
......@@ -10,15 +10,14 @@ CONFIG_GENERIC_ISA_DMA=y
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
......@@ -50,6 +49,7 @@ CONFIG_KMOD=y
# CONFIG_PLAT_MAPPI is not set
# CONFIG_PLAT_USRV is not set
# CONFIG_PLAT_M32700UT is not set
# CONFIG_PLAT_OPSPUT is not set
CONFIG_PLAT_OAKS32R=y
# CONFIG_PLAT_MAPPI2 is not set
# CONFIG_CHIP_M32700 is not set
......@@ -110,6 +110,8 @@ CONFIG_BINFMT_FLAT=y
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
......@@ -159,7 +161,6 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
......@@ -211,13 +212,13 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -310,12 +311,10 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
......@@ -325,6 +324,11 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
......@@ -383,7 +387,8 @@ CONFIG_EXT2_FS=y
#
# DOS/FAT/NT Filesystems
#
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
......@@ -470,6 +475,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -510,5 +516,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
......@@ -10,7 +10,6 @@ CONFIG_GENERIC_ISA_DMA=y
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
......@@ -20,6 +19,7 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
......@@ -81,6 +81,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
#
# CONFIG_M32R_CFC is not set
CONFIG_M32R_SMC91111=y
CONFIG_M32700UT_DS1302=y
#
# Power management options (ACPI, APM)
......@@ -117,6 +118,8 @@ CONFIG_BINFMT_ELF=y
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
......@@ -208,7 +211,6 @@ CONFIG_SCSI_MULTI_LUN=y
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
......@@ -260,13 +262,13 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -309,7 +311,7 @@ CONFIG_INPUT=y
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
......@@ -359,12 +361,10 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
......@@ -379,6 +379,11 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
......@@ -443,6 +448,7 @@ CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
......@@ -450,6 +456,8 @@ CONFIG_UDF_FS=m
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
......@@ -537,6 +545,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
......@@ -584,5 +593,6 @@ CONFIG_DEBUG_INFO=y
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
......@@ -502,7 +502,7 @@ static __inline__ int sched_find_first_bit(unsigned long *b)
* @offset: The bitnumber to start searching at
* @size: The maximum size to search
*/
static __inline__ unsigned long find_next_bit(unsigned long *addr,
static __inline__ unsigned long find_next_bit(const unsigned long *addr,
unsigned long size, unsigned long offset)
{
unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
......
......@@ -17,6 +17,8 @@
* Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
*/
#include <linux/in6.h>
/*
* computes the checksum of a memory block at buff, length len,
* and adds in "sum" (32-bit)
......
#ifndef _ASM_M32R_CPUMASK_H
#define _ASM_M32R_CPUMASK_H
#include <asm-generic/cpumask.h>
#endif /* _ASM_M32R_CPUMASK_H */
......@@ -10,13 +10,19 @@
*/
extern void __bad_udelay(void);
extern void __bad_ndelay(void);
extern void __udelay(unsigned long usecs);
extern void __ndelay(unsigned long nsecs);
extern void __const_udelay(unsigned long usecs);
extern void __delay(unsigned long loops);
#define udelay(n) (__builtin_constant_p(n) ? \
((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 4294UL)) : \
((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c7ul)) : \
__udelay(n))
#define ndelay(n) (__builtin_constant_p(n) ? \
((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
__ndelay(n))
#endif /* _ASM_M32R_DELAY_H */
......@@ -24,6 +24,7 @@
#define O_LARGEFILE 0100000
#define O_DIRECTORY 0200000 /* must be a directory */
#define O_NOFOLLOW 0400000 /* don't follow links */
#define O_NOATIME 01000000
#define F_DUPFD 0 /* dup */
#define F_GETFD 1 /* get close_on_exec */
......
#error "<asm/init.h> should never be used - use <linux/init.h> instead"
......@@ -20,8 +20,10 @@
#define RLIMIT_MEMLOCK 8 /* max locked-in-memory address space */
#define RLIMIT_AS 9 /* address space limit */
#define RLIMIT_LOCKS 10 /* maximum file locks held */
#define RLIMIT_SIGPENDING 11 /* max number of pending signals */
#define RLIMIT_MSGQUEUE 12 /* maximum bytes in POSIX mqueues */
#define RLIM_NLIMITS 11
#define RLIM_NLIMITS 13
/*
* SuS says limits have to be unsigned.
......@@ -44,6 +46,8 @@
{ RLIM_INFINITY, RLIM_INFINITY }, \
{ RLIM_INFINITY, RLIM_INFINITY }, \
{ RLIM_INFINITY, RLIM_INFINITY }, \
{ MAX_SIGPENDING, MAX_SIGPENDING }, \
{ MQ_BYTES_MAX, MQ_BYTES_MAX }, \
}
#endif /* __KERNEL__ */
......
......@@ -18,7 +18,7 @@
#define SCREEN_INFO (*(struct screen_info *) (PARAM+0x200))
#define COMMAND_LINE_SIZE (256)
#define COMMAND_LINE_SIZE (512)
#define RAMDISK_IMAGE_START_MASK (0x07FF)
#define RAMDISK_PROMPT_FLAG (0x8000)
......
......@@ -5,8 +5,10 @@
/* orig : i386 2.4.18 */
#include <linux/linkage.h>
#include <linux/types.h>
#include <linux/linkage.h>
#include <linux/time.h>
#include <linux/compiler.h>
/* Avoid too many header ordering problems. */
struct siginfo;
......@@ -131,7 +133,11 @@ typedef unsigned long sigset_t;
#define SIG_SETMASK 2 /* for setting the signal mask */
/* Type of a signal handler. */
typedef void (*__sighandler_t)(int);
typedef void __signalfn_t(int);
typedef __signalfn_t __user *__sighandler_t;
typedef void __restorefn_t(void);
typedef __restorefn_t __user *__sigrestore_t;
#define SIG_DFL ((__sighandler_t)0) /* default signal handling */
#define SIG_IGN ((__sighandler_t)1) /* ignore signal */
......@@ -142,13 +148,13 @@ struct old_sigaction {
__sighandler_t sa_handler;
old_sigset_t sa_mask;
unsigned long sa_flags;
void (*sa_restorer)(void);
__sigrestore_t sa_restorer;
};
struct sigaction {
__sighandler_t sa_handler;
unsigned long sa_flags;
void (*sa_restorer)(void);
__sigrestore_t sa_restorer;
sigset_t sa_mask; /* mask last for extensibility */
};
......@@ -174,7 +180,7 @@ struct sigaction {
#endif /* __KERNEL__ */
typedef struct sigaltstack {
void *ss_sp;
void __user *ss_sp;
int ss_flags;
size_t ss_size;
} stack_t;
......
......@@ -13,7 +13,49 @@
#include <linux/threads.h>
#include <asm/m32r.h>
extern cpumask_t phys_cpu_present_map;
#define PHYSID_ARRAY_SIZE 1
struct physid_mask
{
unsigned long mask[PHYSID_ARRAY_SIZE];
};
typedef struct physid_mask physid_mask_t;
#define physid_set(physid, map) set_bit(physid, (map).mask)
#define physid_clear(physid, map) clear_bit(physid, (map).mask)
#define physid_isset(physid, map) test_bit(physid, (map).mask)
#define physid_test_and_set(physid, map) test_and_set_bit(physid, (map).mask)
#define physids_and(dst, src1, src2) bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
#define physids_or(dst, src1, src2) bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
#define physids_clear(map) bitmap_zero((map).mask, MAX_APICS)
#define physids_complement(dst, src) bitmap_complement((dst).mask,(src).mask, MAX_APICS)
#define physids_empty(map) bitmap_empty((map).mask, MAX_APICS)
#define physids_equal(map1, map2) bitmap_equal((map1).mask, (map2).mask, MAX_APICS)
#define physids_weight(map) bitmap_weight((map).mask, MAX_APICS)
#define physids_shift_right(d, s, n) bitmap_shift_right((d).mask, (s).mask, n, MAX_APICS)
#define physids_shift_left(d, s, n) bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS)
#define physids_coerce(map) ((map).mask[0])
#define physids_promote(physids) \
({ \
physid_mask_t __physid_mask = PHYSID_MASK_NONE; \
__physid_mask.mask[0] = physids; \
__physid_mask; \
})
#define physid_mask_of_physid(physid) \
({ \
physid_mask_t __physid_mask = PHYSID_MASK_NONE; \
physid_set(physid, __physid_mask); \
__physid_mask; \
})
#define PHYSID_MASK_ALL { {[0 ... PHYSID_ARRAY_SIZE-1] = ~0UL} }
#define PHYSID_MASK_NONE { {[0 ... PHYSID_ARRAY_SIZE-1] = 0UL} }
extern physid_mask_t phys_cpu_present_map;
/*
* Some lowlevel functions might want to know about
......@@ -51,7 +93,7 @@ static __inline__ unsigned int num_booting_cpus(void)
extern void smp_send_timer(void);
extern void calibrate_delay(void);
extern unsigned long send_IPI_mask_phys(unsigned long, int, int);
extern unsigned long send_IPI_mask_phys(cpumask_t, int, int);
#endif /* not __ASSEMBLY__ */
......@@ -75,4 +117,3 @@ extern unsigned long send_IPI_mask_phys(unsigned long, int, int);
#endif /* CONFIG_SMP */
#endif /* _ASM_M32R_SMP_H */
......@@ -323,7 +323,7 @@ extern void __put_user_bad(void);
#define __put_user_check(x,ptr,size) \
({ \
long __pu_err = -EFAULT; \
__typeof__(*(ptr)) *__pu_addr = (ptr); \
__typeof__(*(ptr)) __user *__pu_addr = (ptr); \
might_sleep(); \
if (access_ok(VERIFY_WRITE,__pu_addr,size)) \
__put_user_size((x),__pu_addr,(size),__pu_err); \
......
......@@ -446,15 +446,7 @@ __syscall_return(type,__res); \
* won't be any messing with the stack from main(), but we define
* some others too.
*/
static __inline__ _syscall0(pid_t,setsid)
static __inline__ _syscall3(int,write,int,fd,const char *,buf,off_t,count)
static __inline__ _syscall3(int,read,int,fd,char *,buf,off_t,count)
static __inline__ _syscall3(off_t,lseek,int,fd,off_t,offset,int,count)
static __inline__ _syscall1(int,dup,int,fd)
static __inline__ _syscall3(int,execve,const char *,file,char **,argv,char **,envp)
static __inline__ _syscall3(int,open,const char *,file,int,flag,int,mode)
static __inline__ _syscall1(int,close,int,fd)
static __inline__ _syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options)
asmlinkage int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount);
asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment