Commit 02620d9e authored by Alexei Starovoitov's avatar Alexei Starovoitov

Merge branch 'bpf-dispatcher'

Björn Töpel says:

====================
Overview
========

This is the 6th iteration of the series that introduces the BPF
dispatcher, which is a mechanism to avoid indirect calls.

The BPF dispatcher is a multi-way branch code generator, targeted for
BPF programs. E.g. when an XDP program is executed via the
bpf_prog_run_xdp(), it is invoked via an indirect call. With
retpolines enabled, the indirect call has a substantial performance
impact. The dispatcher is a mechanism that transform indirect calls to
direct calls, and therefore avoids the retpoline. The dispatcher is
generated using the BPF JIT, and relies on text poking provided by
bpf_arch_text_poke().

The dispatcher hijacks a trampoline function it via the __fentry__ nop
of the trampoline. One dispatcher instance currently supports up to 48
dispatch points. This can be extended in the future.

In this series, only one dispatcher instance is supported, and the
only user is XDP. The dispatcher is updated when an XDP program is
attached/detached to/from a netdev. An alternative to this could have
been to update the dispatcher at program load point, but as there are
usually more XDP programs loaded than attached, so the latter was
picked.

The XDP dispatcher is always enabled, if available, because it helps
even when retpolines are disabled. Please refer to the "Performance"
section below.

The first patch refactors the image allocation from the BPF trampoline
code. Patch two introduces the dispatcher, and patch three adds a
dispatcher for XDP, and wires up the XDP control-/ fast-path. Patch
four adds the dispatcher to BPF_TEST_RUN. Patch five adds a simple
selftest, and the last adds alignment to jump targets.

I have rebased the series on commit 679152d3 ("libbpf: Fix printf
compilation warnings on ppc64le arch").

Generated code, x86-64
======================

The dispatcher currently has a maximum of 48 entries, where one entry
is a unique BPF program. Multiple users of a dispatcher instance using
the same BPF program will share that entry.

The program/slot lookup is performed by a binary search, O(log
n). Let's have a look at the generated code.

The trampoline function has the following signature:

  unsigned int tramp(const void *ctx,
                     const struct bpf_insn *insnsi,
                     unsigned int (*bpf_func)(const void *,
                                              const struct bpf_insn *))

On Intel x86-64 this means that rdx will contain the bpf_func. To,
make it easier to read, I've let the BPF programs have the following
range: 0xffffffffffffffff (-1) to 0xfffffffffffffff0
(-16). 0xffffffff81c00f10 is the retpoline thunk, in this case
__x86_indirect_thunk_rdx. If retpolines are disabled the thunk will be
a regular indirect call.

The minimal dispatcher will then look like this:

ffffffffc0002000: cmp    rdx,0xffffffffffffffff
ffffffffc0002007: je     0xffffffffffffffff ; -1
ffffffffc000200d: jmp    0xffffffff81c00f10

A 16 entry dispatcher looks like this:

ffffffffc0020000: cmp    rdx,0xfffffffffffffff7 ; -9
ffffffffc0020007: jg     0xffffffffc0020130
ffffffffc002000d: cmp    rdx,0xfffffffffffffff3 ; -13
ffffffffc0020014: jg     0xffffffffc00200a0
ffffffffc002001a: cmp    rdx,0xfffffffffffffff1 ; -15
ffffffffc0020021: jg     0xffffffffc0020060
ffffffffc0020023: cmp    rdx,0xfffffffffffffff0 ; -16
ffffffffc002002a: jg     0xffffffffc0020040
ffffffffc002002c: cmp    rdx,0xfffffffffffffff0 ; -16
ffffffffc0020033: je     0xfffffffffffffff0 ; -16
ffffffffc0020039: jmp    0xffffffff81c00f10
ffffffffc002003e: xchg   ax,ax
ffffffffc0020040: cmp    rdx,0xfffffffffffffff1 ; -15
ffffffffc0020047: je     0xfffffffffffffff1 ; -15
ffffffffc002004d: jmp    0xffffffff81c00f10
ffffffffc0020052: nop    DWORD PTR [rax+rax*1+0x0]
ffffffffc002005a: nop    WORD PTR [rax+rax*1+0x0]
ffffffffc0020060: cmp    rdx,0xfffffffffffffff2 ; -14
ffffffffc0020067: jg     0xffffffffc0020080
ffffffffc0020069: cmp    rdx,0xfffffffffffffff2 ; -14
ffffffffc0020070: je     0xfffffffffffffff2 ; -14
ffffffffc0020076: jmp    0xffffffff81c00f10
ffffffffc002007b: nop    DWORD PTR [rax+rax*1+0x0]
ffffffffc0020080: cmp    rdx,0xfffffffffffffff3 ; -13
ffffffffc0020087: je     0xfffffffffffffff3 ; -13
ffffffffc002008d: jmp    0xffffffff81c00f10
ffffffffc0020092: nop    DWORD PTR [rax+rax*1+0x0]
ffffffffc002009a: nop    WORD PTR [rax+rax*1+0x0]
ffffffffc00200a0: cmp    rdx,0xfffffffffffffff5 ; -11
ffffffffc00200a7: jg     0xffffffffc00200f0
ffffffffc00200a9: cmp    rdx,0xfffffffffffffff4 ; -12
ffffffffc00200b0: jg     0xffffffffc00200d0
ffffffffc00200b2: cmp    rdx,0xfffffffffffffff4 ; -12
ffffffffc00200b9: je     0xfffffffffffffff4 ; -12
ffffffffc00200bf: jmp    0xffffffff81c00f10
ffffffffc00200c4: nop    DWORD PTR [rax+rax*1+0x0]
ffffffffc00200cc: nop    DWORD PTR [rax+0x0]
ffffffffc00200d0: cmp    rdx,0xfffffffffffffff5 ; -11
ffffffffc00200d7: je     0xfffffffffffffff5 ; -11
ffffffffc00200dd: jmp    0xffffffff81c00f10
ffffffffc00200e2: nop    DWORD PTR [rax+rax*1+0x0]
ffffffffc00200ea: nop    WORD PTR [rax+rax*1+0x0]
ffffffffc00200f0: cmp    rdx,0xfffffffffffffff6 ; -10
ffffffffc00200f7: jg     0xffffffffc0020110
ffffffffc00200f9: cmp    rdx,0xfffffffffffffff6 ; -10
ffffffffc0020100: je     0xfffffffffffffff6 ; -10
ffffffffc0020106: jmp    0xffffffff81c00f10
ffffffffc002010b: nop    DWORD PTR [rax+rax*1+0x0]
ffffffffc0020110: cmp    rdx,0xfffffffffffffff7 ; -9
ffffffffc0020117: je     0xfffffffffffffff7 ; -9
ffffffffc002011d: jmp    0xffffffff81c00f10
ffffffffc0020122: nop    DWORD PTR [rax+rax*1+0x0]
ffffffffc002012a: nop    WORD PTR [rax+rax*1+0x0]
ffffffffc0020130: cmp    rdx,0xfffffffffffffffb ; -5
ffffffffc0020137: jg     0xffffffffc00201d0
ffffffffc002013d: cmp    rdx,0xfffffffffffffff9 ; -7
ffffffffc0020144: jg     0xffffffffc0020190
ffffffffc0020146: cmp    rdx,0xfffffffffffffff8 ; -8
ffffffffc002014d: jg     0xffffffffc0020170
ffffffffc002014f: cmp    rdx,0xfffffffffffffff8 ; -8
ffffffffc0020156: je     0xfffffffffffffff8 ; -8
ffffffffc002015c: jmp    0xffffffff81c00f10
ffffffffc0020161: nop    DWORD PTR [rax+rax*1+0x0]
ffffffffc0020169: nop    DWORD PTR [rax+0x0]
ffffffffc0020170: cmp    rdx,0xfffffffffffffff9 ; -7
ffffffffc0020177: je     0xfffffffffffffff9 ; -7
ffffffffc002017d: jmp    0xffffffff81c00f10
ffffffffc0020182: nop    DWORD PTR [rax+rax*1+0x0]
ffffffffc002018a: nop    WORD PTR [rax+rax*1+0x0]
ffffffffc0020190: cmp    rdx,0xfffffffffffffffa ; -6
ffffffffc0020197: jg     0xffffffffc00201b0
ffffffffc0020199: cmp    rdx,0xfffffffffffffffa ; -6
ffffffffc00201a0: je     0xfffffffffffffffa ; -6
ffffffffc00201a6: jmp    0xffffffff81c00f10
ffffffffc00201ab: nop    DWORD PTR [rax+rax*1+0x0]
ffffffffc00201b0: cmp    rdx,0xfffffffffffffffb ; -5
ffffffffc00201b7: je     0xfffffffffffffffb ; -5
ffffffffc00201bd: jmp    0xffffffff81c00f10
ffffffffc00201c2: nop    DWORD PTR [rax+rax*1+0x0]
ffffffffc00201ca: nop    WORD PTR [rax+rax*1+0x0]
ffffffffc00201d0: cmp    rdx,0xfffffffffffffffd ; -3
ffffffffc00201d7: jg     0xffffffffc0020220
ffffffffc00201d9: cmp    rdx,0xfffffffffffffffc ; -4
ffffffffc00201e0: jg     0xffffffffc0020200
ffffffffc00201e2: cmp    rdx,0xfffffffffffffffc ; -4
ffffffffc00201e9: je     0xfffffffffffffffc ; -4
ffffffffc00201ef: jmp    0xffffffff81c00f10
ffffffffc00201f4: nop    DWORD PTR [rax+rax*1+0x0]
ffffffffc00201fc: nop    DWORD PTR [rax+0x0]
ffffffffc0020200: cmp    rdx,0xfffffffffffffffd ; -3
ffffffffc0020207: je     0xfffffffffffffffd ; -3
ffffffffc002020d: jmp    0xffffffff81c00f10
ffffffffc0020212: nop    DWORD PTR [rax+rax*1+0x0]
ffffffffc002021a: nop    WORD PTR [rax+rax*1+0x0]
ffffffffc0020220: cmp    rdx,0xfffffffffffffffe ; -2
ffffffffc0020227: jg     0xffffffffc0020240
ffffffffc0020229: cmp    rdx,0xfffffffffffffffe ; -2
ffffffffc0020230: je     0xfffffffffffffffe ; -2
ffffffffc0020236: jmp    0xffffffff81c00f10
ffffffffc002023b: nop    DWORD PTR [rax+rax*1+0x0]
ffffffffc0020240: cmp    rdx,0xffffffffffffffff ; -1
ffffffffc0020247: je     0xffffffffffffffff ; -1
ffffffffc002024d: jmp    0xffffffff81c00f10

The nops are there to align jump targets to 16 B.

Performance
===========

The tests were performed using the xdp_rxq_info sample program with
the following command-line:

1. XDP_DRV:
  # xdp_rxq_info --dev eth0 --action XDP_DROP
2. XDP_SKB:
  # xdp_rxq_info --dev eth0 -S --action XDP_DROP
3. xdp-perf, from selftests/bpf:
  # test_progs -v -t xdp_perf

Run with mitigations=auto
-------------------------

Baseline:
1. 21.7 Mpps (21736190)
2. 3.8 Mpps   (3837582)
3. 15 ns

Dispatcher:
1. 30.2 Mpps (30176320)
2. 4.0 Mpps   (4015579)
3. 5 ns

Dispatcher (full; walk all entries, and fallback):
1. 22.0 Mpps (21986704)
2. 3.8 Mpps   (3831298)
3. 17 ns

Run with mitigations=off
------------------------

Baseline:
1. 29.9 Mpps (29875135)
2. 4.1 Mpps   (4100179)
3. 4 ns

Dispatcher:
1. 30.4 Mpps (30439241)
2. 4.1 Mpps   (4109350)
1. 4 ns

Dispatcher (full; walk all entries, and fallback):
1. 28.9 Mpps (28903269)
2. 4.1 Mpps   (4080078)
3. 5 ns

xdp-perf runs, aliged vs non-aligned jump targets
-------------------------------------------------

In this test dispatchers of different sizes, with and without jump
target alignment, were exercised. As outlined above the function
lookup is performed via binary search. This means that depending on
the pointer value of the function, it can reside in the upper or lower
part of the search table. The performed tests were:

1. aligned, mititations=auto, function entry < other entries
2. aligned, mititations=auto, function entry > other entries
3. non-aligned, mititations=auto, function entry < other entries
4. non-aligned, mititations=auto, function entry > other entries
5. aligned, mititations=off, function entry < other entries
6. aligned, mititations=off, function entry > other entries
7. non-aligned, mititations=off, function entry < other entries
8. non-aligned, mititations=off, function entry > other entries

The micro benchmarks showed that alignment of jump target has some
positive impact.

A reply to this cover letter will contain complete data for all runs.

Multiple xdp-perf baseline with mitigations=auto
------------------------------------------------

 Performance counter stats for './test_progs -v -t xdp_perf' (1024 runs):

             16.69 msec task-clock                #    0.984 CPUs utilized            ( +-  0.08% )
                 2      context-switches          #    0.123 K/sec                    ( +-  1.11% )
                 0      cpu-migrations            #    0.000 K/sec                    ( +- 70.68% )
                97      page-faults               #    0.006 M/sec                    ( +-  0.05% )
        49,254,635      cycles                    #    2.951 GHz                      ( +-  0.09% )  (12.28%)
        42,138,558      instructions              #    0.86  insn per cycle           ( +-  0.02% )  (36.15%)
         7,315,291      branches                  #  438.300 M/sec                    ( +-  0.01% )  (59.43%)
         1,011,201      branch-misses             #   13.82% of all branches          ( +-  0.01% )  (83.31%)
        15,440,788      L1-dcache-loads           #  925.143 M/sec                    ( +-  0.00% )  (99.40%)
            39,067      L1-dcache-load-misses     #    0.25% of all L1-dcache hits    ( +-  0.04% )
             6,531      LLC-loads                 #    0.391 M/sec                    ( +-  0.05% )
               442      LLC-load-misses           #    6.76% of all LL-cache hits     ( +-  0.77% )
   <not supported>      L1-icache-loads
            57,964      L1-icache-load-misses                                         ( +-  0.06% )
        15,442,496      dTLB-loads                #  925.246 M/sec                    ( +-  0.00% )
               514      dTLB-load-misses          #    0.00% of all dTLB cache hits   ( +-  0.73% )  (40.57%)
               130      iTLB-loads                #    0.008 M/sec                    ( +-  2.75% )  (16.69%)
     <not counted>      iTLB-load-misses                                              ( +-  8.71% )  (0.60%)
   <not supported>      L1-dcache-prefetches
   <not supported>      L1-dcache-prefetch-misses

         0.0169558 +- 0.0000127 seconds time elapsed  ( +-  0.07% )

Multiple xdp-perf dispatcher with mitigations=auto
--------------------------------------------------

Note that this includes generating the dispatcher.

 Performance counter stats for './test_progs -v -t xdp_perf' (1024 runs):

              4.80 msec task-clock                #    0.953 CPUs utilized            ( +-  0.06% )
                 1      context-switches          #    0.258 K/sec                    ( +-  1.57% )
                 0      cpu-migrations            #    0.000 K/sec
                97      page-faults               #    0.020 M/sec                    ( +-  0.05% )
        14,185,861      cycles                    #    2.955 GHz                      ( +-  0.17% )  (50.49%)
        45,691,935      instructions              #    3.22  insn per cycle           ( +-  0.01% )  (99.19%)
         8,346,008      branches                  # 1738.709 M/sec                    ( +-  0.00% )
            13,046      branch-misses             #    0.16% of all branches          ( +-  0.10% )
        15,443,735      L1-dcache-loads           # 3217.365 M/sec                    ( +-  0.00% )
            39,585      L1-dcache-load-misses     #    0.26% of all L1-dcache hits    ( +-  0.05% )
             7,138      LLC-loads                 #    1.487 M/sec                    ( +-  0.06% )
               671      LLC-load-misses           #    9.40% of all LL-cache hits     ( +-  0.73% )
   <not supported>      L1-icache-loads
            56,213      L1-icache-load-misses                                         ( +-  0.08% )
        15,443,735      dTLB-loads                # 3217.365 M/sec                    ( +-  0.00% )
     <not counted>      dTLB-load-misses                                              (0.00%)
     <not counted>      iTLB-loads                                                    (0.00%)
     <not counted>      iTLB-load-misses                                              (0.00%)
   <not supported>      L1-dcache-prefetches
   <not supported>      L1-dcache-prefetch-misses

        0.00503705 +- 0.00000546 seconds time elapsed  ( +-  0.11% )

Revisions
=========

v4->v5: [1]
  * Fixed s/xdp_ctx/ctx/ type-o (Toke)
  * Marked dispatcher trampoline with noinline attribute (Alexei)

v3->v4: [2]
  * Moved away from doing dispatcher lookup based on the trampoline
    function, to a model where the dispatcher instance is explicitly
    passed to the bpf_dispatcher_change_prog() (Alexei)

v2->v3: [3]
  * Removed xdp_call, and instead make the dispatcher available to all
    XDP users via bpf_prog_run_xdp() and dev_xdp_install(). (Toke)
  * Always enable the dispatcher, if available (Alexei)
  * Reuse BPF trampoline image allocator (Alexei)
  * Make sure the dispatcher is exercised in selftests (Alexei)
  * Only allow one dispatcher, and wire it to XDP

v1->v2: [4]
  * Fixed i386 build warning (kbuild robot)
  * Made bpf_dispatcher_lookup() static (kbuild robot)
  * Make sure xdp_call.h is only enabled for builtins
  * Add xdp_call() to ixgbe, mlx4, and mlx5

RFC->v1: [5]
  * Improved error handling (Edward and Andrii)
  * Explicit cleanup (Andrii)
  * Use 32B with sext cmp (Alexei)
  * Align jump targets to 16B (Alexei)
  * 4 to 16 entries (Toke)
  * Added stats to xdp_call_run()

[1] https://lore.kernel.org/bpf/20191211123017.13212-1-bjorn.topel@gmail.com/
[2] https://lore.kernel.org/bpf/20191209135522.16576-1-bjorn.topel@gmail.com/
[3] https://lore.kernel.org/bpf/20191123071226.6501-1-bjorn.topel@gmail.com/
[4] https://lore.kernel.org/bpf/20191119160757.27714-1-bjorn.topel@gmail.com/
[5] https://lore.kernel.org/bpf/20191113204737.31623-1-bjorn.topel@gmail.com/
====================
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
parents 91cbdf74 116eb788
......@@ -10,10 +10,12 @@
#include <linux/if_vlan.h>
#include <linux/bpf.h>
#include <linux/memory.h>
#include <linux/sort.h>
#include <asm/extable.h>
#include <asm/set_memory.h>
#include <asm/nospec-branch.h>
#include <asm/text-patching.h>
#include <asm/asm-prototypes.h>
static u8 *emit_code(u8 *ptr, u32 bytes, unsigned int len)
{
......@@ -1530,6 +1532,154 @@ int arch_prepare_bpf_trampoline(void *image, struct btf_func_model *m, u32 flags
return 0;
}
static int emit_cond_near_jump(u8 **pprog, void *func, void *ip, u8 jmp_cond)
{
u8 *prog = *pprog;
int cnt = 0;
s64 offset;
offset = func - (ip + 2 + 4);
if (!is_simm32(offset)) {
pr_err("Target %p is out of range\n", func);
return -EINVAL;
}
EMIT2_off32(0x0F, jmp_cond + 0x10, offset);
*pprog = prog;
return 0;
}
static void emit_nops(u8 **pprog, unsigned int len)
{
unsigned int i, noplen;
u8 *prog = *pprog;
int cnt = 0;
while (len > 0) {
noplen = len;
if (noplen > ASM_NOP_MAX)
noplen = ASM_NOP_MAX;
for (i = 0; i < noplen; i++)
EMIT1(ideal_nops[noplen][i]);
len -= noplen;
}
*pprog = prog;
}
static int emit_fallback_jump(u8 **pprog)
{
u8 *prog = *pprog;
int err = 0;
#ifdef CONFIG_RETPOLINE
/* Note that this assumes the the compiler uses external
* thunks for indirect calls. Both clang and GCC use the same
* naming convention for external thunks.
*/
err = emit_jump(&prog, __x86_indirect_thunk_rdx, prog);
#else
int cnt = 0;
EMIT2(0xFF, 0xE2); /* jmp rdx */
#endif
*pprog = prog;
return err;
}
static int emit_bpf_dispatcher(u8 **pprog, int a, int b, s64 *progs)
{
u8 *jg_reloc, *jg_target, *prog = *pprog;
int pivot, err, jg_bytes = 1, cnt = 0;
s64 jg_offset;
if (a == b) {
/* Leaf node of recursion, i.e. not a range of indices
* anymore.
*/
EMIT1(add_1mod(0x48, BPF_REG_3)); /* cmp rdx,func */
if (!is_simm32(progs[a]))
return -1;
EMIT2_off32(0x81, add_1reg(0xF8, BPF_REG_3),
progs[a]);
err = emit_cond_near_jump(&prog, /* je func */
(void *)progs[a], prog,
X86_JE);
if (err)
return err;
err = emit_fallback_jump(&prog); /* jmp thunk/indirect */
if (err)
return err;
*pprog = prog;
return 0;
}
/* Not a leaf node, so we pivot, and recursively descend into
* the lower and upper ranges.
*/
pivot = (b - a) / 2;
EMIT1(add_1mod(0x48, BPF_REG_3)); /* cmp rdx,func */
if (!is_simm32(progs[a + pivot]))
return -1;
EMIT2_off32(0x81, add_1reg(0xF8, BPF_REG_3), progs[a + pivot]);
if (pivot > 2) { /* jg upper_part */
/* Require near jump. */
jg_bytes = 4;
EMIT2_off32(0x0F, X86_JG + 0x10, 0);
} else {
EMIT2(X86_JG, 0);
}
jg_reloc = prog;
err = emit_bpf_dispatcher(&prog, a, a + pivot, /* emit lower_part */
progs);
if (err)
return err;
/* From Intel 64 and IA-32 Architectures Optimization
* Reference Manual, 3.4.1.4 Code Alignment, Assembly/Compiler
* Coding Rule 11: All branch targets should be 16-byte
* aligned.
*/
jg_target = PTR_ALIGN(prog, 16);
if (jg_target != prog)
emit_nops(&prog, jg_target - prog);
jg_offset = prog - jg_reloc;
emit_code(jg_reloc - jg_bytes, jg_offset, jg_bytes);
err = emit_bpf_dispatcher(&prog, a + pivot + 1, /* emit upper_part */
b, progs);
if (err)
return err;
*pprog = prog;
return 0;
}
static int cmp_ips(const void *a, const void *b)
{
const s64 *ipa = a;
const s64 *ipb = b;
if (*ipa > *ipb)
return 1;
if (*ipa < *ipb)
return -1;
return 0;
}
int arch_prepare_bpf_dispatcher(void *image, s64 *funcs, int num_funcs)
{
u8 *prog = image;
sort(funcs, num_funcs, sizeof(funcs[0]), cmp_ips, NULL);
return emit_bpf_dispatcher(&prog, 0, num_funcs - 1, funcs);
}
struct x64_jit_data {
struct bpf_binary_header *header;
int *addrs;
......
......@@ -470,11 +470,69 @@ struct bpf_trampoline {
void *image;
u64 selector;
};
#define BPF_DISPATCHER_MAX 48 /* Fits in 2048B */
struct bpf_dispatcher_prog {
struct bpf_prog *prog;
refcount_t users;
};
struct bpf_dispatcher {
/* dispatcher mutex */
struct mutex mutex;
void *func;
struct bpf_dispatcher_prog progs[BPF_DISPATCHER_MAX];
int num_progs;
void *image;
u32 image_off;
};
static __always_inline unsigned int bpf_dispatcher_nopfunc(
const void *ctx,
const struct bpf_insn *insnsi,
unsigned int (*bpf_func)(const void *,
const struct bpf_insn *))
{
return bpf_func(ctx, insnsi);
}
#ifdef CONFIG_BPF_JIT
struct bpf_trampoline *bpf_trampoline_lookup(u64 key);
int bpf_trampoline_link_prog(struct bpf_prog *prog);
int bpf_trampoline_unlink_prog(struct bpf_prog *prog);
void bpf_trampoline_put(struct bpf_trampoline *tr);
void *bpf_jit_alloc_exec_page(void);
#define BPF_DISPATCHER_INIT(name) { \
.mutex = __MUTEX_INITIALIZER(name.mutex), \
.func = &name##func, \
.progs = {}, \
.num_progs = 0, \
.image = NULL, \
.image_off = 0 \
}
#define DEFINE_BPF_DISPATCHER(name) \
noinline unsigned int name##func( \
const void *ctx, \
const struct bpf_insn *insnsi, \
unsigned int (*bpf_func)(const void *, \
const struct bpf_insn *)) \
{ \
return bpf_func(ctx, insnsi); \
} \
EXPORT_SYMBOL(name##func); \
struct bpf_dispatcher name = BPF_DISPATCHER_INIT(name);
#define DECLARE_BPF_DISPATCHER(name) \
unsigned int name##func( \
const void *ctx, \
const struct bpf_insn *insnsi, \
unsigned int (*bpf_func)(const void *, \
const struct bpf_insn *)); \
extern struct bpf_dispatcher name;
#define BPF_DISPATCHER_FUNC(name) name##func
#define BPF_DISPATCHER_PTR(name) (&name)
void bpf_dispatcher_change_prog(struct bpf_dispatcher *d, struct bpf_prog *from,
struct bpf_prog *to);
#else
static inline struct bpf_trampoline *bpf_trampoline_lookup(u64 key)
{
......@@ -489,6 +547,13 @@ static inline int bpf_trampoline_unlink_prog(struct bpf_prog *prog)
return -ENOTSUPP;
}
static inline void bpf_trampoline_put(struct bpf_trampoline *tr) {}
#define DEFINE_BPF_DISPATCHER(name)
#define DECLARE_BPF_DISPATCHER(name)
#define BPF_DISPATCHER_FUNC(name) bpf_dispatcher_nopfunc
#define BPF_DISPATCHER_PTR(name) NULL
static inline void bpf_dispatcher_change_prog(struct bpf_dispatcher *d,
struct bpf_prog *from,
struct bpf_prog *to) {}
#endif
struct bpf_func_info_aux {
......@@ -940,6 +1005,8 @@ int btf_distill_func_proto(struct bpf_verifier_log *log,
int btf_check_func_arg_match(struct bpf_verifier_env *env, int subprog);
struct bpf_prog *bpf_prog_by_id(u32 id);
#else /* !CONFIG_BPF_SYSCALL */
static inline struct bpf_prog *bpf_prog_get(u32 ufd)
{
......@@ -1071,6 +1138,11 @@ static inline int bpf_prog_test_run_flow_dissector(struct bpf_prog *prog,
static inline void bpf_map_put(struct bpf_map *map)
{
}
static inline struct bpf_prog *bpf_prog_by_id(u32 id)
{
return ERR_PTR(-ENOTSUPP);
}
#endif /* CONFIG_BPF_SYSCALL */
static inline struct bpf_prog *bpf_prog_get_type(u32 ufd,
......
......@@ -559,23 +559,26 @@ struct sk_filter {
DECLARE_STATIC_KEY_FALSE(bpf_stats_enabled_key);
#define BPF_PROG_RUN(prog, ctx) ({ \
#define __BPF_PROG_RUN(prog, ctx, dfunc) ({ \
u32 ret; \
cant_sleep(); \
if (static_branch_unlikely(&bpf_stats_enabled_key)) { \
struct bpf_prog_stats *stats; \
u64 start = sched_clock(); \
ret = (*(prog)->bpf_func)(ctx, (prog)->insnsi); \
ret = dfunc(ctx, (prog)->insnsi, (prog)->bpf_func); \
stats = this_cpu_ptr(prog->aux->stats); \
u64_stats_update_begin(&stats->syncp); \
stats->cnt++; \
stats->nsecs += sched_clock() - start; \
u64_stats_update_end(&stats->syncp); \
} else { \
ret = (*(prog)->bpf_func)(ctx, (prog)->insnsi); \
ret = dfunc(ctx, (prog)->insnsi, (prog)->bpf_func); \
} \
ret; })
#define BPF_PROG_RUN(prog, ctx) __BPF_PROG_RUN(prog, ctx, \
bpf_dispatcher_nopfunc)
#define BPF_SKB_CB_LEN QDISC_CB_PRIV_LEN
struct bpf_skb_data_end {
......@@ -699,6 +702,8 @@ static inline u32 bpf_prog_run_clear_cb(const struct bpf_prog *prog,
return res;
}
DECLARE_BPF_DISPATCHER(bpf_dispatcher_xdp)
static __always_inline u32 bpf_prog_run_xdp(const struct bpf_prog *prog,
struct xdp_buff *xdp)
{
......@@ -708,9 +713,12 @@ static __always_inline u32 bpf_prog_run_xdp(const struct bpf_prog *prog,
* already takes rcu_read_lock() when fetching the program, so
* it's not necessary here anymore.
*/
return BPF_PROG_RUN(prog, xdp);
return __BPF_PROG_RUN(prog, xdp,
BPF_DISPATCHER_FUNC(bpf_dispatcher_xdp));
}
void bpf_prog_change_xdp(struct bpf_prog *prev_prog, struct bpf_prog *prog);
static inline u32 bpf_prog_insn_size(const struct bpf_prog *prog)
{
return prog->len * sizeof(struct bpf_insn);
......
......@@ -8,6 +8,7 @@ obj-$(CONFIG_BPF_SYSCALL) += local_storage.o queue_stack_maps.o
obj-$(CONFIG_BPF_SYSCALL) += disasm.o
obj-$(CONFIG_BPF_JIT) += trampoline.o
obj-$(CONFIG_BPF_SYSCALL) += btf.o
obj-$(CONFIG_BPF_JIT) += dispatcher.o
ifeq ($(CONFIG_NET),y)
obj-$(CONFIG_BPF_SYSCALL) += devmap.o
obj-$(CONFIG_BPF_SYSCALL) += cpumap.o
......
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright(c) 2019 Intel Corporation. */
#include <linux/hash.h>
#include <linux/bpf.h>
#include <linux/filter.h>
/* The BPF dispatcher is a multiway branch code generator. The
* dispatcher is a mechanism to avoid the performance penalty of an
* indirect call, which is expensive when retpolines are enabled. A
* dispatch client registers a BPF program into the dispatcher, and if
* there is available room in the dispatcher a direct call to the BPF
* program will be generated. All calls to the BPF programs called via
* the dispatcher will then be a direct call, instead of an
* indirect. The dispatcher hijacks a trampoline function it via the
* __fentry__ of the trampoline. The trampoline function has the
* following signature:
*
* unsigned int trampoline(const void *ctx, const struct bpf_insn *insnsi,
* unsigned int (*bpf_func)(const void *,
* const struct bpf_insn *));
*/
static struct bpf_dispatcher_prog *bpf_dispatcher_find_prog(
struct bpf_dispatcher *d, struct bpf_prog *prog)
{
int i;
for (i = 0; i < BPF_DISPATCHER_MAX; i++) {
if (prog == d->progs[i].prog)
return &d->progs[i];
}
return NULL;
}
static struct bpf_dispatcher_prog *bpf_dispatcher_find_free(
struct bpf_dispatcher *d)
{
return bpf_dispatcher_find_prog(d, NULL);
}
static bool bpf_dispatcher_add_prog(struct bpf_dispatcher *d,
struct bpf_prog *prog)
{
struct bpf_dispatcher_prog *entry;
if (!prog)
return false;
entry = bpf_dispatcher_find_prog(d, prog);
if (entry) {
refcount_inc(&entry->users);
return false;
}
entry = bpf_dispatcher_find_free(d);
if (!entry)
return false;
bpf_prog_inc(prog);
entry->prog = prog;
refcount_set(&entry->users, 1);
d->num_progs++;
return true;
}
static bool bpf_dispatcher_remove_prog(struct bpf_dispatcher *d,
struct bpf_prog *prog)
{
struct bpf_dispatcher_prog *entry;
if (!prog)
return false;
entry = bpf_dispatcher_find_prog(d, prog);
if (!entry)
return false;
if (refcount_dec_and_test(&entry->users)) {
entry->prog = NULL;
bpf_prog_put(prog);
d->num_progs--;
return true;
}
return false;
}
int __weak arch_prepare_bpf_dispatcher(void *image, s64 *funcs, int num_funcs)
{
return -ENOTSUPP;
}
static int bpf_dispatcher_prepare(struct bpf_dispatcher *d, void *image)
{
s64 ips[BPF_DISPATCHER_MAX] = {}, *ipsp = &ips[0];
int i;
for (i = 0; i < BPF_DISPATCHER_MAX; i++) {
if (d->progs[i].prog)
*ipsp++ = (s64)(uintptr_t)d->progs[i].prog->bpf_func;
}
return arch_prepare_bpf_dispatcher(image, &ips[0], d->num_progs);
}
static void bpf_dispatcher_update(struct bpf_dispatcher *d, int prev_num_progs)
{
void *old, *new;
u32 noff;
int err;
if (!prev_num_progs) {
old = NULL;
noff = 0;
} else {
old = d->image + d->image_off;
noff = d->image_off ^ (PAGE_SIZE / 2);
}
new = d->num_progs ? d->image + noff : NULL;
if (new) {
if (bpf_dispatcher_prepare(d, new))
return;
}
err = bpf_arch_text_poke(d->func, BPF_MOD_JUMP, old, new);
if (err || !new)
return;
d->image_off = noff;
}
void bpf_dispatcher_change_prog(struct bpf_dispatcher *d, struct bpf_prog *from,
struct bpf_prog *to)
{
bool changed = false;
int prev_num_progs;
if (from == to)
return;
mutex_lock(&d->mutex);
if (!d->image) {
d->image = bpf_jit_alloc_exec_page();
if (!d->image)
goto out;
}
prev_num_progs = d->num_progs;
changed |= bpf_dispatcher_remove_prog(d, from);
changed |= bpf_dispatcher_add_prog(d, to);
if (!changed)
goto out;
bpf_dispatcher_update(d, prev_num_progs);
out:
mutex_unlock(&d->mutex);
}
......@@ -2338,17 +2338,12 @@ static int bpf_obj_get_next_id(const union bpf_attr *attr,
#define BPF_PROG_GET_FD_BY_ID_LAST_FIELD prog_id
static int bpf_prog_get_fd_by_id(const union bpf_attr *attr)
struct bpf_prog *bpf_prog_by_id(u32 id)
{
struct bpf_prog *prog;
u32 id = attr->prog_id;
int fd;
if (CHECK_ATTR(BPF_PROG_GET_FD_BY_ID))
return -EINVAL;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (!id)
return ERR_PTR(-ENOENT);
spin_lock_bh(&prog_idr_lock);
prog = idr_find(&prog_idr, id);
......@@ -2357,7 +2352,22 @@ static int bpf_prog_get_fd_by_id(const union bpf_attr *attr)
else
prog = ERR_PTR(-ENOENT);
spin_unlock_bh(&prog_idr_lock);
return prog;
}
static int bpf_prog_get_fd_by_id(const union bpf_attr *attr)
{
struct bpf_prog *prog;
u32 id = attr->prog_id;
int fd;
if (CHECK_ATTR(BPF_PROG_GET_FD_BY_ID))
return -EINVAL;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
prog = bpf_prog_by_id(id);
if (IS_ERR(prog))
return PTR_ERR(prog);
......
......@@ -13,6 +13,22 @@ static struct hlist_head trampoline_table[TRAMPOLINE_TABLE_SIZE];
/* serializes access to trampoline_table */
static DEFINE_MUTEX(trampoline_mutex);
void *bpf_jit_alloc_exec_page(void)
{
void *image;
image = bpf_jit_alloc_exec(PAGE_SIZE);
if (!image)
return NULL;
set_vm_flush_reset_perms(image);
/* Keep image as writeable. The alternative is to keep flipping ro/rw
* everytime new program is attached or detached.
*/
set_memory_x((long)image, 1);
return image;
}
struct bpf_trampoline *bpf_trampoline_lookup(u64 key)
{
struct bpf_trampoline *tr;
......@@ -33,7 +49,7 @@ struct bpf_trampoline *bpf_trampoline_lookup(u64 key)
goto out;
/* is_root was checked earlier. No need for bpf_jit_charge_modmem() */
image = bpf_jit_alloc_exec(PAGE_SIZE);
image = bpf_jit_alloc_exec_page();
if (!image) {
kfree(tr);
tr = NULL;
......@@ -47,12 +63,6 @@ struct bpf_trampoline *bpf_trampoline_lookup(u64 key)
mutex_init(&tr->mutex);
for (i = 0; i < BPF_TRAMP_MAX; i++)
INIT_HLIST_HEAD(&tr->progs_hlist[i]);
set_vm_flush_reset_perms(image);
/* Keep image as writeable. The alternative is to keep flipping ro/rw
* everytime new program is attached or detached.
*/
set_memory_x((long)image, 1);
tr->image = image;
out:
mutex_unlock(&trampoline_mutex);
......
......@@ -15,7 +15,7 @@
#include <trace/events/bpf_test_run.h>
static int bpf_test_run(struct bpf_prog *prog, void *ctx, u32 repeat,
u32 *retval, u32 *time)
u32 *retval, u32 *time, bool xdp)
{
struct bpf_cgroup_storage *storage[MAX_BPF_CGROUP_STORAGE_TYPE] = { NULL };
enum bpf_cgroup_storage_type stype;
......@@ -41,6 +41,10 @@ static int bpf_test_run(struct bpf_prog *prog, void *ctx, u32 repeat,
time_start = ktime_get_ns();
for (i = 0; i < repeat; i++) {
bpf_cgroup_storage_set(storage);
if (xdp)
*retval = bpf_prog_run_xdp(prog, ctx);
else
*retval = BPF_PROG_RUN(prog, ctx);
if (signal_pending(current)) {
......@@ -356,7 +360,7 @@ int bpf_prog_test_run_skb(struct bpf_prog *prog, const union bpf_attr *kattr,
ret = convert___skb_to_skb(skb, ctx);
if (ret)
goto out;
ret = bpf_test_run(prog, skb, repeat, &retval, &duration);
ret = bpf_test_run(prog, skb, repeat, &retval, &duration, false);
if (ret)
goto out;
if (!is_l2) {
......@@ -413,8 +417,8 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
rxqueue = __netif_get_rx_queue(current->nsproxy->net_ns->loopback_dev, 0);
xdp.rxq = &rxqueue->xdp_rxq;
ret = bpf_test_run(prog, &xdp, repeat, &retval, &duration);
bpf_prog_change_xdp(NULL, prog);
ret = bpf_test_run(prog, &xdp, repeat, &retval, &duration, true);
if (ret)
goto out;
if (xdp.data != data + XDP_PACKET_HEADROOM + NET_IP_ALIGN ||
......@@ -422,6 +426,7 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr,
size = xdp.data_end - xdp.data;
ret = bpf_test_finish(kattr, uattr, xdp.data, size, retval, duration);
out:
bpf_prog_change_xdp(prog, NULL);
kfree(data);
return ret;
}
......
......@@ -8542,7 +8542,17 @@ static int dev_xdp_install(struct net_device *dev, bpf_op_t bpf_op,
struct netlink_ext_ack *extack, u32 flags,
struct bpf_prog *prog)
{
bool non_hw = !(flags & XDP_FLAGS_HW_MODE);
struct bpf_prog *prev_prog = NULL;
struct netdev_bpf xdp;
int err;
if (non_hw) {
prev_prog = bpf_prog_by_id(__dev_xdp_query(dev, bpf_op,
XDP_QUERY_PROG));
if (IS_ERR(prev_prog))
prev_prog = NULL;
}
memset(&xdp, 0, sizeof(xdp));
if (flags & XDP_FLAGS_HW_MODE)
......@@ -8553,7 +8563,14 @@ static int dev_xdp_install(struct net_device *dev, bpf_op_t bpf_op,
xdp.flags = flags;
xdp.prog = prog;
return bpf_op(dev, &xdp);
err = bpf_op(dev, &xdp);
if (!err && non_hw)
bpf_prog_change_xdp(prev_prog, prog);
if (prev_prog)
bpf_prog_put(prev_prog);
return err;
}
static void dev_xdp_uninstall(struct net_device *dev)
......
......@@ -8940,3 +8940,11 @@ const struct bpf_verifier_ops sk_reuseport_verifier_ops = {
const struct bpf_prog_ops sk_reuseport_prog_ops = {
};
#endif /* CONFIG_INET */
DEFINE_BPF_DISPATCHER(bpf_dispatcher_xdp)
void bpf_prog_change_xdp(struct bpf_prog *prev_prog, struct bpf_prog *prog)
{
bpf_dispatcher_change_prog(BPF_DISPATCHER_PTR(bpf_dispatcher_xdp),
prev_prog, prog);
}
// SPDX-License-Identifier: GPL-2.0
#include <test_progs.h>
void test_xdp_perf(void)
{
const char *file = "./xdp_dummy.o";
__u32 duration, retval, size;
struct bpf_object *obj;
char in[128], out[128];
int err, prog_fd;
err = bpf_prog_load(file, BPF_PROG_TYPE_XDP, &obj, &prog_fd);
if (CHECK_FAIL(err))
return;
err = bpf_prog_test_run(prog_fd, 1000000, &in[0], 128,
out, &size, &retval, &duration);
CHECK(err || retval != XDP_PASS || size != 128,
"xdp-perf",
"err %d errno %d retval %d size %d\n",
err, errno, retval, size);
bpf_object__close(obj);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment