RDMA/mlx5: Move all WR logic from qp.c to separate file

Split qp.c by removing all WR logic to separate file.

Link: https://lore.kernel.org/r/20200506065513.4668-4-leon@kernel.orgSigned-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

drivers/infiniband/hw/mlx5/Makefile

@@ -16,7 +16,8 @@ mlx5_ib-y := ah.o \
 	     qpc.o \
 	     restrack.o \
 	     srq.o \
-	     srq_cmd.o
+	     srq_cmd.o \
+	     wr.o
 
 mlx5_ib-$(CONFIG_INFINIBAND_ON_DEMAND_PAGING) += odp.o
 mlx5_ib-$(CONFIG_MLX5_ESWITCH) += ib_rep.o

drivers/infiniband/hw/mlx5/main.c

@@ -61,6 +61,7 @@
 #include "cmd.h"
 #include "srq.h"
 #include "qp.h"
+#include "wr.h"
 #include <linux/mlx5/fs_helpers.h>
 #include <linux/mlx5/accel.h>
 #include <rdma/uverbs_std_types.h>
@@ -6657,8 +6658,8 @@ static const struct ib_device_ops mlx5_ib_dev_ops = {
 	.modify_qp = mlx5_ib_modify_qp,
 	.modify_srq = mlx5_ib_modify_srq,
 	.poll_cq = mlx5_ib_poll_cq,
-	.post_recv = mlx5_ib_post_recv,
-	.post_send = mlx5_ib_post_send,
+	.post_recv = mlx5_ib_post_recv_nodrain,
+	.post_send = mlx5_ib_post_send_nodrain,
 	.post_srq_recv = mlx5_ib_post_srq_recv,
 	.process_mad = mlx5_ib_process_mad,
 	.query_ah = mlx5_ib_query_ah,

drivers/infiniband/hw/mlx5/mlx5_ib.h

@@ -1178,10 +1178,6 @@ int mlx5_ib_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *qp_attr, int qp_attr
 int mlx5_ib_destroy_qp(struct ib_qp *qp, struct ib_udata *udata);
 void mlx5_ib_drain_sq(struct ib_qp *qp);
 void mlx5_ib_drain_rq(struct ib_qp *qp);
-int mlx5_ib_post_send(struct ib_qp *ibqp, const struct ib_send_wr *wr,
-		      const struct ib_send_wr **bad_wr);
-int mlx5_ib_post_recv(struct ib_qp *ibqp, const struct ib_recv_wr *wr,
-		      const struct ib_recv_wr **bad_wr);
 int mlx5_ib_read_wqe_sq(struct mlx5_ib_qp *qp, int wqe_index, void *buffer,
 			size_t buflen, size_t *bc);
 int mlx5_ib_read_wqe_rq(struct mlx5_ib_qp *qp, int wqe_index, void *buffer,

drivers/infiniband/hw/mlx5/wr.h

+/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */
+/*
+ * Copyright (c) 2020, Mellanox Technologies inc. All rights reserved.
+ */
+
+#ifndef _MLX5_IB_WR_H
+#define _MLX5_IB_WR_H
+
+#include "mlx5_ib.h"
+
+enum {
+	MLX5_IB_SQ_UMR_INLINE_THRESHOLD = 64,
+};
+
+struct mlx5_wqe_eth_pad {
+	u8 rsvd0[16];
+};
+
+
+/* get_sq_edge - Get the next nearby edge.
+ *
+ * An 'edge' is defined as the first following address after the end
+ * of the fragment or the SQ. Accordingly, during the WQE construction
+ * which repetitively increases the pointer to write the next data, it
+ * simply should check if it gets to an edge.
+ *
+ * @sq - SQ buffer.
+ * @idx - Stride index in the SQ buffer.
+ *
+ * Return:
+ *	The new edge.
+ */
+static inline void *get_sq_edge(struct mlx5_ib_wq *sq, u32 idx)
+{
+	void *fragment_end;
+
+	fragment_end = mlx5_frag_buf_get_wqe
+		(&sq->fbc,
+		 mlx5_frag_buf_get_idx_last_contig_stride(&sq->fbc, idx));
+
+	return fragment_end + MLX5_SEND_WQE_BB;
+}
+
+int mlx5_ib_post_send(struct ib_qp *ibqp, const struct ib_send_wr *wr,
+		      const struct ib_send_wr **bad_wr, bool drain);
+int mlx5_ib_post_recv(struct ib_qp *ibqp, const struct ib_recv_wr *wr,
+		      const struct ib_recv_wr **bad_wr, bool drain);
+
+static inline int mlx5_ib_post_send_nodrain(struct ib_qp *ibqp,
+					    const struct ib_send_wr *wr,
+					    const struct ib_send_wr **bad_wr)
+{
+	return mlx5_ib_post_send(ibqp, wr, bad_wr, false);
+}
+
+static inline int mlx5_ib_post_send_drain(struct ib_qp *ibqp,
+					  const struct ib_send_wr *wr,
+					  const struct ib_send_wr **bad_wr)
+{
+	return mlx5_ib_post_send(ibqp, wr, bad_wr, true);
+}
+
+static inline int mlx5_ib_post_recv_nodrain(struct ib_qp *ibqp,
+					    const struct ib_recv_wr *wr,
+					    const struct ib_recv_wr **bad_wr)
+{
+	return mlx5_ib_post_recv(ibqp, wr, bad_wr, false);
+}
+
+static inline int mlx5_ib_post_recv_drain(struct ib_qp *ibqp,
+					  const struct ib_recv_wr *wr,
+					  const struct ib_recv_wr **bad_wr)
+{
+	return mlx5_ib_post_recv(ibqp, wr, bad_wr, true);
+}
+#endif /* _MLX5_IB_WR_H */