Merge branches 'acpi-pci', 'acpi-soc' and 'pnp'

* acpi-pci:
  x86/ACPI/PCI: Recognize that Interrupt Line 255 means "not connected"

* acpi-soc:
  i2c: designware: Add device HID for future AMD I2C controller

* pnp:
  PNP / ACPI: add ACPI_RESOURCE_TYPE_SERIAL_BUS as a valid type

drivers/acpi/acpi_apd.c

@@ -143,6 +143,7 @@ static const struct acpi_device_id acpi_apd_device_ids[] = {
 	/* Generic apd devices */
 #ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
 	{ "AMD0010", APD_ADDR(cz_i2c_desc) },
+	{ "AMDI0010", APD_ADDR(cz_i2c_desc) },
 	{ "AMD0020", APD_ADDR(cz_uart_desc) },
 	{ "AMD0030", },
 #endif

drivers/acpi/pci_irq.c

@@ -33,6 +33,7 @@
 #include <linux/pci.h>
 #include <linux/acpi.h>
 #include <linux/slab.h>
+#include <linux/interrupt.h>
 
 #define PREFIX "ACPI: "
 
@@ -387,6 +388,23 @@ static inline int acpi_isa_register_gsi(struct pci_dev *dev)
 }
 #endif
 
+static inline bool acpi_pci_irq_valid(struct pci_dev *dev, u8 pin)
+{
+#ifdef CONFIG_X86
+	/*
+	 * On x86 irq line 0xff means "unknown" or "no connection"
+	 * (PCI 3.0, Section 6.2.4, footnote on page 223).
+	 */
+	if (dev->irq == 0xff) {
+		dev->irq = IRQ_NOTCONNECTED;
+		dev_warn(&dev->dev, "PCI INT %c: not connected\n",
+			 pin_name(pin));
+		return false;
+	}
+#endif
+	return true;
+}
+
 int acpi_pci_irq_enable(struct pci_dev *dev)
 {
 	struct acpi_prt_entry *entry;
@@ -431,11 +449,14 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
 	} else
 		gsi = -1;
 
+	if (gsi < 0) {
 		/*
 		 * No IRQ known to the ACPI subsystem - maybe the BIOS /
 		 * driver reported one, then use it. Exit in any case.
 		 */
-	if (gsi < 0) {
+		if (!acpi_pci_irq_valid(dev, pin))
+			return 0;
+
 		if (acpi_isa_register_gsi(dev))
 			dev_warn(&dev->dev, "PCI INT %c: no GSI\n",
 				 pin_name(pin));

drivers/i2c/busses/i2c-designware-platdrv.c

@@ -123,6 +123,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
 	{ "80860F41", 0 },
 	{ "808622C1", 0 },
 	{ "AMD0010", ACCESS_INTR_MASK },
+	{ "AMDI0010", ACCESS_INTR_MASK },
 	{ "AMDI0510", 0 },
 	{ "APMC0D0F", 0 },
 	{ }

drivers/pnp/pnpacpi/rsparser.c

@@ -252,6 +252,10 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
 	case ACPI_RESOURCE_TYPE_GENERIC_REGISTER:
 		break;
 
+	case ACPI_RESOURCE_TYPE_SERIAL_BUS:
+		/* serial bus connections (I2C/SPI/UART) are not pnp */
+		break;
+
 	default:
 		dev_warn(&dev->dev, "unknown resource type %d in _CRS\n",
 			 res->type);

include/linux/interrupt.h

@@ -125,6 +125,16 @@ struct irqaction {
 
 extern irqreturn_t no_action(int cpl, void *dev_id);
 
+/*
+ * If a (PCI) device interrupt is not connected we set dev->irq to
+ * IRQ_NOTCONNECTED. This causes request_irq() to fail with -ENOTCONN, so we
+ * can distingiush that case from other error returns.
+ *
+ * 0x80000000 is guaranteed to be outside the available range of interrupts
+ * and easy to distinguish from other possible incorrect values.
+ */
+#define IRQ_NOTCONNECTED	(1U << 31)
+
 extern int __must_check
 request_threaded_irq(unsigned int irq, irq_handler_t handler,
 		     irq_handler_t thread_fn,

kernel/irq/manage.c

@@ -1609,6 +1609,9 @@ int request_threaded_irq(unsigned int irq, irq_handler_t handler,
 	struct irq_desc *desc;
 	int retval;
 
+	if (irq == IRQ_NOTCONNECTED)
+		return -ENOTCONN;
+
 	/*
 	 * Sanity-check: shared interrupts must pass in a real dev-ID,
 	 * otherwise we'll have trouble later trying to figure out
@@ -1699,9 +1702,13 @@ EXPORT_SYMBOL(request_threaded_irq);
 int request_any_context_irq(unsigned int irq, irq_handler_t handler,
 			    unsigned long flags, const char *name, void *dev_id)
 {
-	struct irq_desc *desc = irq_to_desc(irq);
+	struct irq_desc *desc;
 	int ret;
 
+	if (irq == IRQ_NOTCONNECTED)
+		return -ENOTCONN;
+
+	desc = irq_to_desc(irq);
 	if (!desc)
 		return -EINVAL;