Update to megaraid version 2.20.3.0

From: 	Mukker, Atul <Atulm@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Documentation/scsi/ChangeLog.megaraid

+Release Date	: Thu Aug 19 09:58:33 EDT 2004 - Atul Mukker <atulm@lsil.com>
+Current Version	: 2.20.3.0 (scsi module), 2.20.2.0 (cmm module)
+Older Version	: 2.20.2.0 (scsi module), 2.20.1.0 (cmm module)
+
+i.	When copying the mailbox packets, copy only first 14 bytes (for 32-bit
+	mailboxes) and only first 22 bytes (for 64-bit mailboxes). This is to
+	avoid getting the stale values for busy bit. We want to set the busy
+	bit just before issuing command to the FW.
+
+ii.	In the reset handling, if the reseted command is not owned by the
+	driver, do not (wrongly) print information for the "attached" driver
+	packet.
+
+iii.	Have extended wait when issuing command in synchronous mode. This is
+	required for the cases where the option ROM is disabled and there is
+	no BIOS to start the controller. The FW starts to boot after receiving
+	the first command from the driver. The current driver has 1 second
+	timeout for the synchronous commands, which is far less than what is
+	actually required. We now wait up to MBOX_RESET_TIME (180 seconds) for
+	FW boot process.
+
+iv.	In megaraid_mbox_product_info, clear the mailbox contents completely
+	before preparing the command for inquiry3. This is to ensure that the
+	FW does not get junk values in the command.
+
+v.	Do away with the redundant LSI_CONFIG_COMPAT redefinition for
+	CONFIG_COMPAT. Replace <asm/ioctl32.h> with <linux/ioctl32.h>
+
+		- James Bottomley <James.Bottomley@SteelEye.com>, 08.17.2004
+		 linux-scsi mailing list
+
+vi.	Add support for 64-bit applications. Current drivers assume only
+	32-bit applications, even on 64-bit platforms. Use the "data" and
+	"buffer" fields of the mimd_t structure, instead of embedded 32-bit
+	addresses in application mailbox and passthru structures.
+
+vii.	Move the function declarations for the management module from
+	megaraid_mm.h to megaraid_mm.c
+
+		- Andrew Morton <akpm@osdl.org>, 08.19.2004
+		linux-scsi mailing list
+
+viii.	Change default values for MEGARAID_NEWGEN, MEGARAID_MM, and
+	MEGARAID_MAILBOX to 'n' in Kconfig.megaraid
+
+		- Andrew Morton <akpm@osdl.org>, 08.19.2004
+		linux-scsi mailing list
+
+ix.	replace udelay with msleep
+
+x.	Typos corrected in comments and whitespace adjustments, explicit
+	grouping of expressions.
+
+
+Release Date	: Fri Jul 23 15:22:07 EDT 2004 - Atul Mukker <atulm@lsil.com>
+Current Version	: 2.20.2.0 (scsi module), 2.20.1.0 (cmm module)
+Older Version	: 2.20.1.0 (scsi module), 2.20.0.0 (cmm module)
+
+i.	Add PCI ids for Acer ROMB 2E solution
+
+ii.	Add PCI ids for I4
+
+iii.	Typo corrected for subsys id for megaraid sata 300-4x
+
+iv.	Remove yield() while mailbox handshake in synchronous commands
+
+
+	"My other main gripe is things like this:
+
+	+	// wait for maximum 1 second for status to post
+	+	for (i = 0; i < 40000; i++) {
+	+		if (mbox->numstatus != 0xFF) break;
+	+		udelay(25); yield();
+	+	}
+
+	which litter the driver.  Use of yield() in drivers is deprecated."
+
+		- James Bottomley <James.Bottomley@SteelEye.com>, 07.14.2004
+		 linux-scsi mailing list
+
+v.	Remove redundant __megaraid_busywait_mbox routine
+
+vi.	Fix bug in the managment module, which causes a system lockup when the
+	IO module is loaded and then unloaded, followed by executing any
+	management utility. The current version of management module does not
+	handle the adapter unregister properly.
+
+	Specifically, it still keeps a reference to the unregistered
+	controllers. To avoid this, the static array adapters has been
+	replaced by a dynamic list, which gets updated every time an adapter
+	is added or removed.
+
+	Also, during unregistration of the IO module, the resources are
+	now released in the exact reverse order of the allocation time
+	sequence.
+
+
+Release Date	: Fri Jun 25 18:58:43 EDT 2004 - Atul Mukker <atulm@lsil.com>
+Current Version	: 2.20.1.0
+Older Version	: megaraid 2.20.0.1
+
+i.	Stale list pointer in adapter causes kernel panic when module
+	megaraid_mbox is unloaded
+
+
+Release Date	: Thu Jun 24 20:37:11 EDT 2004 - Atul Mukker <atulm@lsil.com>
+Current Version	: 2.20.0.1
+Older Version	: megaraid 2.20.0.00
+
+i.	Modules are not 'y' by default, but depend on current definition of
+	SCSI & PCI.
+
+ii.	Redundant structure mraid_driver_t removed.
+
+iii.	Miscellaneous indentation and goto/label fixes.
+		- Christoph Hellwig <hch@infradead.org>, 06.24.2004 linux-scsi
+
+iv.	scsi_host_put(), do just before completing HBA shutdown.
+
+
+
 Release Date	: Mon Jun 21 19:53:54 EDT 2004 - Atul Mukker <atulm@lsil.com>
 Current Version	: 2.20.0.0
 Older Version	: megaraid 2.20.0.rc2 and 2.00.3
@@ -55,5 +176,5 @@ ix.	Better implementation of error handling and recovery. Driver now
 	performs extended errors recovery for instances like scsi cable pull.
 
 x.	Disassociate the management commands with an overlaid scsi command.
-	Driver now treats the mangement packets as special packets and has a
+	Driver now treats the management packets as special packets and has a
 	dedicated callback routine.

drivers/scsi/megaraid/Kconfig.megaraid

 config MEGARAID_NEWGEN
 	bool "LSI Logic New Generation RAID Device Drivers"
 	depends on PCI && SCSI
-	default y
 	help
 	LSI Logic RAID Device Drivers
 
 config MEGARAID_MM
 	tristate "LSI Logic Management Module (New Driver)"
 	depends on PCI && SCSI && MEGARAID_NEWGEN
-	default m
 	help
 	Management Module provides ioctl, sysfs support for LSI Logic
 	RAID controllers.
@@ -19,7 +17,6 @@ config MEGARAID_MM
 config MEGARAID_MAILBOX
 	tristate "LSI Logic MegaRAID Driver (New Driver)"
 	depends on PCI && SCSI && MEGARAID_MM
-	default $MEGARAID_MM
 	help
 	List of supported controllers
 
@@ -48,11 +45,10 @@ config MEGARAID_MAILBOX
 	LSI MegaRAID SCSI 320-4X	1000:0407:1000:0531
 	LSI MegaRAID SCSI 320-1E	1000:0408:1000:0001
 	LSI MegaRAID SCSI 320-2E	1000:0408:1000:0002
-	LSI MegaRAID SATA 150-2		1095:3112:1000:0534
 	LSI MegaRAID SATA 150-4		1000:1960:1000:4523
 	LSI MegaRAID SATA 150-6		1000:1960:1000:0523
-	LSI MegaRAID SATA 150-4X	1000:0409:1000:1504
-	LSI MegaRAID SATA 150-8X	1000:0409:1000:1508
+	LSI MegaRAID SATA 300-4X	1000:0409:1000:3004
+	LSI MegaRAID SATA 300-8X	1000:0409:1000:3008
 	INTEL RAID Controller SRCU42X	1000:0407:8086:0532
 	INTEL RAID Controller SRCS16	1000:1960:8086:0523
 	INTEL RAID Controller SRCU42E	1000:0408:8086:0002
@@ -62,6 +58,7 @@ config MEGARAID_MAILBOX
 	INTEL RAID Controller SROMBU42E	1000:0408:8086:3499
 	INTEL RAID Controller SRCU51L	1000:1960:8086:0520
 	FSC MegaRAID PCI Express ROMB	1000:0408:1734:1065
+	ACER MegaRAID ROMB-2E		1000:0408:1025:004D
 
 	To compile this driver as a module, choose M here: the
 	module will be called megaraid_mbox
@@ -70,7 +67,6 @@ if MEGARAID_NEWGEN=n
 config MEGARAID_LEGACY
 	tristate "LSI Logic Legacy MegaRAID Driver"
 	depends on PCI && SCSI
-	default m
 	help
 	This driver supports the LSI MegaRAID 418, 428, 438, 466, 762, 490
 	and 467 SCSI host adapters. This driver also support the all U320

drivers/scsi/megaraid/mega_common.h

@@ -113,7 +113,6 @@ typedef struct {
  * @param max_channel		: maximum channel number supported - inclusive
  * @param max_target		: max target supported - inclusive
  * @param max_lun		: max lun supported - inclusive
- * @param list			: list of megaraid host structures
  * @param unique_id		: unique identifier for each adapter
  * @param irq			: IRQ for this adapter
  * @param ito			: internal timeout value, (-1) means no timeout
@@ -171,7 +170,6 @@ typedef struct {
 	uint16_t		max_target;
 	uint8_t			max_lun;
 
-	struct list_head	list;
 	uint32_t		unique_id;
 	uint8_t			irq;
 	uint8_t			ito;
@@ -244,19 +242,6 @@ typedef struct {
 					[SCP2TARGET(scp)] & 0xFF);	\
 	}
 
-/**
- * struct mraid_driver_t - global driver data
- * @param driver_version	: driver version
- * @param device_list		: list of adapter_t structures
- *
- * mraid_driver_t contains information which is global to the driver.
- */
-typedef struct {
-	uint8_t			driver_version[8];
-	struct list_head	device_list;
-} mraid_driver_t;
-
-
 /*
  * ### Helper routines ###
  */

drivers/scsi/megaraid/megaraid_ioctl.h

@@ -64,8 +64,6 @@
 #define GET_STATS		0x50000
 #define GET_IOCTL_VERSION	0x01
 
-#define MAX_LSI_CMN_ADAPS	16
-
 #define EXT_IOCTL_SIGN_SZ	16
 #define EXT_IOCTL_SIGN		"$$_EXTD_IOCTL_$$"
 
@@ -249,6 +247,7 @@ typedef struct mm_dmapool {
  * @pdev		: pci dev; used for allocating dma'ble memory
  * @issue_uioc		: Driver supplied routine to issue uioc_t commands
  *			: issue_uioc(drvr_data, kioc, ISSUE/ABORT, uioc_done)
+ * @list		: attach with the global list of adapters
  * @kioc_list		: block of mem for @max_kioc number of kiocs
  * @kioc_pool		: pool of free kiocs
  * @kioc_pool_lock	: protection for free pool
@@ -274,6 +273,7 @@ typedef struct mraid_mmadp {
 
 /* Maintained by common module */
 
+	struct list_head	list;
 	uioc_t			*kioc_list;
 	struct list_head	kioc_pool;
 	spinlock_t		kioc_pool_lock;

drivers/scsi/megaraid/megaraid_mbox.h

@@ -21,8 +21,8 @@
 #include "megaraid_ioctl.h"
 
 
-#define MEGARAID_VERSION	"2.20.0.0"
-#define MEGARAID_EXT_VERSION	"(Release Date: Wed Jun 23 11:38:38 EDT 2004)"
+#define MEGARAID_VERSION	"2.20.3.0"
+#define MEGARAID_EXT_VERSION	"(Release Date: Thu Aug 19 09:58:33 EDT 2004)"
 
 
 /*
@@ -88,6 +88,9 @@
 #define PCI_DEVICE_ID_MEGARAID_SCSI_320_2E		0x0408
 #define PCI_SUBSYS_ID_MEGARAID_SCSI_320_2E		0x0002
 
+#define PCI_DEVICE_ID_MEGARAID_I4_133_RAID		0x1960
+#define PCI_SUBSYS_ID_MEGARAID_I4_133_RAID		0x0522
+
 #define PCI_DEVICE_ID_MEGARAID_SATA_150_4		0x1960
 #define PCI_SUBSYS_ID_MEGARAID_SATA_150_4		0x4523
 
@@ -95,7 +98,7 @@
 #define PCI_SUBSYS_ID_MEGARAID_SATA_150_6		0x0523
 
 #define PCI_DEVICE_ID_MEGARAID_SATA_300_4x		0x0409
-#define PCI_SUBSYS_ID_MEGARAID_SATA_300_4x		0x3008
+#define PCI_SUBSYS_ID_MEGARAID_SATA_300_4x		0x3004
 
 #define PCI_DEVICE_ID_MEGARAID_SATA_300_8x		0x0409
 #define PCI_SUBSYS_ID_MEGARAID_SATA_300_8x		0x3008
@@ -127,6 +130,9 @@
 #define PCI_DEVICE_ID_FSC_MEGARAID_PCI_EXPRESS_ROMB	0x0408
 #define PCI_SUBSYS_ID_FSC_MEGARAID_PCI_EXPRESS_ROMB	0x1065
 
+#define PCI_DEVICE_ID_MEGARAID_ACER_ROMB_2E		0x0408
+#define PCI_SUBSYS_ID_MEGARAID_ACER_ROMB_2E		0x004D
+
 #define PCI_SUBSYS_ID_PERC3_QC				0x0471
 #define PCI_SUBSYS_ID_PERC3_DC				0x0493
 #define PCI_SUBSYS_ID_PERC3_SC				0x0475

drivers/scsi/megaraid/megaraid_mm.h

@@ -23,14 +23,15 @@
 #include <linux/moduleparam.h>
 #include <linux/pci.h>
 #include <linux/list.h>
+#include <linux/ioctl32.h>
 
 #include "mbox_defs.h"
 #include "megaraid_ioctl.h"
 
 
-#define LSI_COMMON_MOD_VERSION	"2.20.0.0"
+#define LSI_COMMON_MOD_VERSION	"2.20.2.0"
 #define LSI_COMMON_MOD_EXT_VERSION	\
-		"(Release Date: Wed Jun 23 11:38:38 EDT 2004)"
+		"(Release Date: Thu Aug 19 09:58:33 EDT 2004)"
 
 
 #define LSI_DBGLVL			dbglevel
@@ -38,22 +39,6 @@
 // The smallest dma pool
 #define MRAID_MM_INIT_BUFF_SIZE		4096
 
-/*
- * Localizing ioctl32 differences
- */
-#if defined (CONFIG_COMPAT) || defined(__x86_64__) || defined(IA32_EMULATION)
-#if !defined(CONFIG_IA64)
-#define LSI_CONFIG_COMPAT
-#endif
-#endif
-
-#ifdef LSI_CONFIG_COMPAT
-#include <asm/ioctl32.h>
-#else
-#define register_ioctl32_conversion(a,b)	do{}while(0)
-#define unregister_ioctl32_conversion(a)	do{}while(0)
-#endif /* LSI_CONFIG_COMPAT */
-
 /**
  * mimd_t	: Old style ioctl packet structure (deprecated)
  *
@@ -112,36 +97,6 @@ typedef struct mimd {
 
 } __attribute__ ((packed))mimd_t;
 
-
-// Entry points for char node driver
-static int mraid_mm_open(struct inode *, struct file *);
-static int mraid_mm_ioctl(struct inode *, struct file *, uint, unsigned long);
-
-
-// routines to convert to and from the old the format
-static int mimd_to_kioc(mimd_t *, mraid_mmadp_t *, uioc_t *);
-static int kioc_to_mimd(uioc_t *, mimd_t *);
-
-
-// Helper functions
-static int handle_drvrcmd(unsigned long, uint8_t, int *);
-static int lld_ioctl(mraid_mmadp_t *, uioc_t *);
-static void ioctl_done(uioc_t *);
-static void lld_timedout(unsigned long);
-static void hinfo_to_cinfo(mraid_hba_info_t *, mcontroller_t *);
-static int mraid_mm_get_adpindex(mimd_t *, int *);
-static uioc_t *mraid_mm_alloc_kioc(mraid_mmadp_t *);
-static void mraid_mm_dealloc_kioc(mraid_mmadp_t *, uioc_t *);
-static int mraid_mm_attach_buf(mraid_mmadp_t *, uioc_t *, int);
-static int mraid_mm_setup_dma_pools(mraid_mmadp_t *);
-static void mraid_mm_free_adp_resources(mraid_mmadp_t *);
-static void mraid_mm_teardown_dma_pools(mraid_mmadp_t *);
-
-#ifdef LSI_CONFIG_COMPAT
-static int mraid_mm_compat_ioctl(unsigned int, unsigned int, unsigned long,
-		struct file *);
-#endif
-
 #endif // MEGARAID_MM_H
 
 // vi: set ts=8 sw=8 tw=78: