regulator: tps65219: use generic set_bypass()

Due to wrong interpretation of the specification,
custom implementation was used instead of standard regmap helper.
LINK: https://lore.kernel.org/all/c2014039-f1e8-6976-33d6-52e2dd4e7b66@baylibre.com/

Fixes: c12ac5fc ("regulator: drivers: Add TI TPS65219 PMIC regulators support")

Regulator does NOT require to be off to be switched to bypass mode.
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Link: https://lore.kernel.org/r/20230203140119.13029-1-jneanne@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

drivers/regulator/tps65219-regulator.c

@@ -173,24 +173,6 @@ static unsigned int tps65219_get_mode(struct regulator_dev *dev)
 		return REGULATOR_MODE_NORMAL;
 }
 
-/*
- * generic regulator_set_bypass_regmap does not fully match requirements
- * TPS65219 Requires explicitly that regulator is disabled before switch
- */
-static int tps65219_set_bypass(struct regulator_dev *dev, bool enable)
-{
-	struct tps65219 *tps = rdev_get_drvdata(dev);
-	unsigned int rid = rdev_get_id(dev);
-
-	if (dev->desc->ops->is_enabled(dev)) {
-		dev_err(tps->dev,
-			"%s LDO%d enabled, must be shut down to set bypass ",
-			__func__, rid);
-		return -EBUSY;
-	}
-	return regulator_set_bypass_regmap(dev, enable);
-}
-
 /* Operations permitted on BUCK1/2/3 */
 static const struct regulator_ops tps65219_bucks_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -217,7 +199,7 @@ static const struct regulator_ops tps65219_ldos_1_2_ops = {
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.map_voltage		= regulator_map_voltage_linear_range,
-	.set_bypass		= tps65219_set_bypass,
+	.set_bypass		= regulator_set_bypass_regmap,
 	.get_bypass		= regulator_get_bypass_regmap,
 };