fbdev/amifb: Store monitor limits in separate __initdata variables

The static fb_info will go away soon.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

drivers/video/amifb.c

@@ -961,6 +961,11 @@ static int round_down_bpp = 1;	/* for mode probing */
 static int amifb_ilbm = 0;	/* interleaved or normal bitplanes */
 static int amifb_inverse = 0;
 
+static u32 amifb_hfmin __initdata;	/* monitor hfreq lower limit (Hz) */
+static u32 amifb_hfmax __initdata;	/* monitor hfreq upper limit (Hz) */
+static u16 amifb_vfmin __initdata;	/* monitor vfreq lower limit (Hz) */
+static u16 amifb_vfmax __initdata;	/* monitor vfreq upper limit (Hz) */
+
 
 	/*
 	 * Macros for the conversion from real world values to hardware register
@@ -2357,10 +2362,10 @@ static void __init amifb_setup_mcap(char *spec)
 	if (hmax <= 0 || hmax <= hmin)
 		return;
 
-	fb_info.monspecs.vfmin = vmin;
-	fb_info.monspecs.vfmax = vmax;
-	fb_info.monspecs.hfmin = hmin;
-	fb_info.monspecs.hfmax = hmax;
+	amifb_hfmin = hmin;
+	amifb_hfmax = hmax;
+	amifb_vfmin = vmin;
+	amifb_vfmax = vmax;
 }
 
 static int __init amifb_setup(char *options)
@@ -3666,10 +3671,15 @@ static int __init amifb_probe(struct platform_device *pdev)
 		}
 	}
 
+	if (amifb_hfmin) {
+		fb_info.monspecs.hfmin = amifb_hfmin;
+		fb_info.monspecs.hfmax = amifb_hfmax;
+		fb_info.monspecs.vfmin = amifb_vfmin;
+		fb_info.monspecs.vfmax = amifb_vfmax;
+	} else {
 		/*
-	 *  These monitor specs are for a typical Amiga monitor (e.g. A1960)
+		 *  These are for a typical Amiga monitor (e.g. A1960)
 		 */
-	if (fb_info.monspecs.hfmin == 0) {
 		fb_info.monspecs.hfmin = 15000;
 		fb_info.monspecs.hfmax = 38000;
 		fb_info.monspecs.vfmin = 49;