Commit 03fc9a7f authored by Ludovic Desroches's avatar Ludovic Desroches Committed by Chris Ball

mmc: atmel-mci: change atmci_readl and atmci_writel macros

Change atmci_readl and atmci_writel macros: remove string concatenation.
We can use these macros with registers which are not prefixed by ATMCI_.
This is the case if we want to write PDC registers which are common to
several devices so they are not prefixed with ATMCI_.
Signed-off-by: default avatarLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: default avatarChris Ball <cjb@laptop.org>
parent 2c96a293
......@@ -121,8 +121,8 @@
/* Register access macros */
#define atmci_readl(port,reg) \
__raw_readl((port)->regs + ATMCI_##reg)
__raw_readl((port)->regs + reg)
#define atmci_writel(port,reg,value) \
__raw_writel((value), (port)->regs + ATMCI_##reg)
__raw_writel((value), (port)->regs + reg)
#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
......@@ -499,7 +499,7 @@ static void atmci_set_timeout(struct atmel_mci *host,
dev_vdbg(&slot->mmc->class_dev, "setting timeout to %u cycles\n",
dtocyc << dtomul_to_shift[dtomul]);
atmci_writel(host, DTOR, (ATMCI_DTOMUL(dtomul) | ATMCI_DTOCYC(dtocyc)));
atmci_writel(host, ATMCI_DTOR, (ATMCI_DTOMUL(dtomul) | ATMCI_DTOCYC(dtocyc)));
}
/*
......@@ -564,14 +564,14 @@ static void atmci_start_command(struct atmel_mci *host,
"start command: ARGR=0x%08x CMDR=0x%08x\n",
cmd->arg, cmd_flags);
atmci_writel(host, ARGR, cmd->arg);
atmci_writel(host, CMDR, cmd_flags);
atmci_writel(host, ATMCI_ARGR, cmd->arg);
atmci_writel(host, ATMCI_CMDR, cmd_flags);
}
static void atmci_send_stop_cmd(struct atmel_mci *host, struct mmc_data *data)
{
atmci_start_command(host, data->stop, host->stop_cmdr);
atmci_writel(host, IER, ATMCI_CMDRDY);
atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY);
}
#ifdef CONFIG_MMC_ATMELMCI_DMA
......@@ -596,7 +596,7 @@ static void atmci_stop_dma(struct atmel_mci *host)
} else {
/* Data transfer was stopped by the interrupt handler */
atmci_set_pending(host, EVENT_XFER_COMPLETE);
atmci_writel(host, IER, ATMCI_NOTBUSY);
atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
}
}
......@@ -610,7 +610,7 @@ static void atmci_dma_complete(void *arg)
if (atmci_is_mci2())
/* Disable DMA hardware handshaking on MCI */
atmci_writel(host, DMA, atmci_readl(host, DMA) & ~ATMCI_DMAEN);
atmci_writel(host, ATMCI_DMA, atmci_readl(host, ATMCI_DMA) & ~ATMCI_DMAEN);
atmci_dma_cleanup(host);
......@@ -642,7 +642,7 @@ static void atmci_dma_complete(void *arg)
* completion callback" rule of the dma engine
* framework.
*/
atmci_writel(host, IER, ATMCI_NOTBUSY);
atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
}
}
......@@ -680,7 +680,7 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
return -ENODEV;
if (atmci_is_mci2())
atmci_writel(host, DMA, ATMCI_DMA_CHKSIZE(3) | ATMCI_DMAEN);
atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(3) | ATMCI_DMAEN);
if (data->flags & MMC_DATA_READ)
direction = DMA_FROM_DEVICE;
......@@ -730,7 +730,7 @@ static void atmci_stop_dma(struct atmel_mci *host)
{
/* Data transfer was stopped by the interrupt handler */
atmci_set_pending(host, EVENT_XFER_COMPLETE);
atmci_writel(host, IER, ATMCI_NOTBUSY);
atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
}
#endif /* CONFIG_MMC_ATMELMCI_DMA */
......@@ -793,24 +793,24 @@ static void atmci_start_request(struct atmel_mci *host,
host->data_status = 0;
if (host->need_reset) {
atmci_writel(host, CR, ATMCI_CR_SWRST);
atmci_writel(host, CR, ATMCI_CR_MCIEN);
atmci_writel(host, MR, host->mode_reg);
atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
atmci_writel(host, ATMCI_MR, host->mode_reg);
if (atmci_is_mci2())
atmci_writel(host, CFG, host->cfg_reg);
atmci_writel(host, ATMCI_CFG, host->cfg_reg);
host->need_reset = false;
}
atmci_writel(host, SDCR, slot->sdc_reg);
atmci_writel(host, ATMCI_SDCR, slot->sdc_reg);
iflags = atmci_readl(host, IMR);
iflags = atmci_readl(host, ATMCI_IMR);
if (iflags & ~(ATMCI_SDIOIRQA | ATMCI_SDIOIRQB))
dev_warn(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n",
iflags);
if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) {
/* Send init sequence (74 clock cycles) */
atmci_writel(host, CMDR, ATMCI_CMDR_SPCMD_INIT);
while (!(atmci_readl(host, SR) & ATMCI_CMDRDY))
atmci_writel(host, ATMCI_CMDR, ATMCI_CMDR_SPCMD_INIT);
while (!(atmci_readl(host, ATMCI_SR) & ATMCI_CMDRDY))
cpu_relax();
}
iflags = 0;
......@@ -819,7 +819,7 @@ static void atmci_start_request(struct atmel_mci *host,
atmci_set_timeout(host, slot, data);
/* Must set block count/size before sending command */
atmci_writel(host, BLKR, ATMCI_BCNT(data->blocks)
atmci_writel(host, ATMCI_BLKR, ATMCI_BCNT(data->blocks)
| ATMCI_BLKLEN(data->blksz));
dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n",
ATMCI_BCNT(data->blocks) | ATMCI_BLKLEN(data->blksz));
......@@ -852,7 +852,7 @@ static void atmci_start_request(struct atmel_mci *host,
* conditions (e.g. command and data complete, but stop not
* prepared yet.)
*/
atmci_writel(host, IER, iflags);
atmci_writel(host, ATMCI_IER, iflags);
}
static void atmci_queue_request(struct atmel_mci *host,
......@@ -927,10 +927,10 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
spin_lock_bh(&host->lock);
if (!host->mode_reg) {
clk_enable(host->mck);
atmci_writel(host, CR, ATMCI_CR_SWRST);
atmci_writel(host, CR, ATMCI_CR_MCIEN);
atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
if (atmci_is_mci2())
atmci_writel(host, CFG, host->cfg_reg);
atmci_writel(host, ATMCI_CFG, host->cfg_reg);
}
/*
......@@ -972,9 +972,9 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
}
if (list_empty(&host->queue)) {
atmci_writel(host, MR, host->mode_reg);
atmci_writel(host, ATMCI_MR, host->mode_reg);
if (atmci_is_mci2())
atmci_writel(host, CFG, host->cfg_reg);
atmci_writel(host, ATMCI_CFG, host->cfg_reg);
} else {
host->need_clock_update = true;
}
......@@ -992,9 +992,9 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
}
}
if (!any_slot_active) {
atmci_writel(host, CR, ATMCI_CR_MCIDIS);
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
if (host->mode_reg) {
atmci_readl(host, MR);
atmci_readl(host, ATMCI_MR);
clk_disable(host->mck);
}
host->mode_reg = 0;
......@@ -1058,9 +1058,9 @@ static void atmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
struct atmel_mci *host = slot->host;
if (enable)
atmci_writel(host, IER, slot->sdio_irq);
atmci_writel(host, ATMCI_IER, slot->sdio_irq);
else
atmci_writel(host, IDR, slot->sdio_irq);
atmci_writel(host, ATMCI_IDR, slot->sdio_irq);
}
static const struct mmc_host_ops atmci_ops = {
......@@ -1087,9 +1087,9 @@ static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq)
* busy transferring data.
*/
if (host->need_clock_update) {
atmci_writel(host, MR, host->mode_reg);
atmci_writel(host, ATMCI_MR, host->mode_reg);
if (atmci_is_mci2())
atmci_writel(host, CFG, host->cfg_reg);
atmci_writel(host, ATMCI_CFG, host->cfg_reg);
}
host->cur_slot->mrq = NULL;
......@@ -1118,10 +1118,10 @@ static void atmci_command_complete(struct atmel_mci *host,
u32 status = host->cmd_status;
/* Read the response from the card (up to 16 bytes) */
cmd->resp[0] = atmci_readl(host, RSPR);
cmd->resp[1] = atmci_readl(host, RSPR);
cmd->resp[2] = atmci_readl(host, RSPR);
cmd->resp[3] = atmci_readl(host, RSPR);
cmd->resp[0] = atmci_readl(host, ATMCI_RSPR);
cmd->resp[1] = atmci_readl(host, ATMCI_RSPR);
cmd->resp[2] = atmci_readl(host, ATMCI_RSPR);
cmd->resp[3] = atmci_readl(host, ATMCI_RSPR);
if (status & ATMCI_RTOE)
cmd->error = -ETIMEDOUT;
......@@ -1139,7 +1139,7 @@ static void atmci_command_complete(struct atmel_mci *host,
if (cmd->data) {
atmci_stop_dma(host);
host->data = NULL;
atmci_writel(host, IDR, ATMCI_NOTBUSY
atmci_writel(host, ATMCI_IDR, ATMCI_NOTBUSY
| ATMCI_TXRDY | ATMCI_RXRDY
| ATMCI_DATA_ERROR_FLAGS);
}
......@@ -1192,11 +1192,11 @@ static void atmci_detect_change(unsigned long data)
* Reset controller to terminate any ongoing
* commands or data transfers.
*/
atmci_writel(host, CR, ATMCI_CR_SWRST);
atmci_writel(host, CR, ATMCI_CR_MCIEN);
atmci_writel(host, MR, host->mode_reg);
atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
atmci_writel(host, ATMCI_MR, host->mode_reg);
if (atmci_is_mci2())
atmci_writel(host, CFG, host->cfg_reg);
atmci_writel(host, ATMCI_CFG, host->cfg_reg);
host->data = NULL;
host->cmd = NULL;
......@@ -1262,7 +1262,7 @@ static void atmci_tasklet_func(unsigned long priv)
dev_vdbg(&host->pdev->dev,
"tasklet: state %u pending/completed/mask %lx/%lx/%x\n",
state, host->pending_events, host->completed_events,
atmci_readl(host, IMR));
atmci_readl(host, ATMCI_IMR));
do {
prev_state = state;
......@@ -1331,7 +1331,7 @@ static void atmci_tasklet_func(unsigned long priv)
} else {
data->bytes_xfered = data->blocks * data->blksz;
data->error = 0;
atmci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS);
atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS);
}
if (!data->stop) {
......@@ -1381,7 +1381,7 @@ static void atmci_read_data_pio(struct atmel_mci *host)
unsigned int nbytes = 0;
do {
value = atmci_readl(host, RDR);
value = atmci_readl(host, ATMCI_RDR);
if (likely(offset + 4 <= sg->length)) {
put_unaligned(value, (u32 *)(buf + offset));
......@@ -1413,9 +1413,9 @@ static void atmci_read_data_pio(struct atmel_mci *host)
nbytes += offset;
}
status = atmci_readl(host, SR);
status = atmci_readl(host, ATMCI_SR);
if (status & ATMCI_DATA_ERROR_FLAGS) {
atmci_writel(host, IDR, (ATMCI_NOTBUSY | ATMCI_RXRDY
atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_RXRDY
| ATMCI_DATA_ERROR_FLAGS));
host->data_status = status;
data->bytes_xfered += nbytes;
......@@ -1432,8 +1432,8 @@ static void atmci_read_data_pio(struct atmel_mci *host)
return;
done:
atmci_writel(host, IDR, ATMCI_RXRDY);
atmci_writel(host, IER, ATMCI_NOTBUSY);
atmci_writel(host, ATMCI_IDR, ATMCI_RXRDY);
atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
data->bytes_xfered += nbytes;
smp_wmb();
atmci_set_pending(host, EVENT_XFER_COMPLETE);
......@@ -1452,7 +1452,7 @@ static void atmci_write_data_pio(struct atmel_mci *host)
do {
if (likely(offset + 4 <= sg->length)) {
value = get_unaligned((u32 *)(buf + offset));
atmci_writel(host, TDR, value);
atmci_writel(host, ATMCI_TDR, value);
offset += 4;
nbytes += 4;
......@@ -1473,20 +1473,20 @@ static void atmci_write_data_pio(struct atmel_mci *host)
host->sg = sg = sg_next(sg);
if (!sg) {
atmci_writel(host, TDR, value);
atmci_writel(host, ATMCI_TDR, value);
goto done;
}
offset = 4 - remaining;
buf = sg_virt(sg);
memcpy((u8 *)&value + remaining, buf, offset);
atmci_writel(host, TDR, value);
atmci_writel(host, ATMCI_TDR, value);
nbytes += offset;
}
status = atmci_readl(host, SR);
status = atmci_readl(host, ATMCI_SR);
if (status & ATMCI_DATA_ERROR_FLAGS) {
atmci_writel(host, IDR, (ATMCI_NOTBUSY | ATMCI_TXRDY
atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_TXRDY
| ATMCI_DATA_ERROR_FLAGS));
host->data_status = status;
data->bytes_xfered += nbytes;
......@@ -1503,8 +1503,8 @@ static void atmci_write_data_pio(struct atmel_mci *host)
return;
done:
atmci_writel(host, IDR, ATMCI_TXRDY);
atmci_writel(host, IER, ATMCI_NOTBUSY);
atmci_writel(host, ATMCI_IDR, ATMCI_TXRDY);
atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
data->bytes_xfered += nbytes;
smp_wmb();
atmci_set_pending(host, EVENT_XFER_COMPLETE);
......@@ -1512,7 +1512,7 @@ static void atmci_write_data_pio(struct atmel_mci *host)
static void atmci_cmd_interrupt(struct atmel_mci *host, u32 status)
{
atmci_writel(host, IDR, ATMCI_CMDRDY);
atmci_writel(host, ATMCI_IDR, ATMCI_CMDRDY);
host->cmd_status = status;
smp_wmb();
......@@ -1540,16 +1540,16 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id)
unsigned int pass_count = 0;
do {
status = atmci_readl(host, SR);
mask = atmci_readl(host, IMR);
status = atmci_readl(host, ATMCI_SR);
mask = atmci_readl(host, ATMCI_IMR);
pending = status & mask;
if (!pending)
break;
if (pending & ATMCI_DATA_ERROR_FLAGS) {
atmci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS
atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS
| ATMCI_RXRDY | ATMCI_TXRDY);
pending &= atmci_readl(host, IMR);
pending &= atmci_readl(host, ATMCI_IMR);
host->data_status = status;
smp_wmb();
......@@ -1557,7 +1557,7 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id)
tasklet_schedule(&host->tasklet);
}
if (pending & ATMCI_NOTBUSY) {
atmci_writel(host, IDR,
atmci_writel(host, ATMCI_IDR,
ATMCI_DATA_ERROR_FLAGS | ATMCI_NOTBUSY);
if (!host->data_status)
host->data_status = status;
......@@ -1790,7 +1790,7 @@ static int __init atmci_probe(struct platform_device *pdev)
goto err_ioremap;
clk_enable(host->mck);
atmci_writel(host, CR, ATMCI_CR_SWRST);
atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
host->bus_hz = clk_get_rate(host->mck);
clk_disable(host->mck);
......@@ -1861,9 +1861,9 @@ static int __exit atmci_remove(struct platform_device *pdev)
}
clk_enable(host->mck);
atmci_writel(host, IDR, ~0UL);
atmci_writel(host, CR, ATMCI_CR_MCIDIS);
atmci_readl(host, SR);
atmci_writel(host, ATMCI_IDR, ~0UL);
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
atmci_readl(host, ATMCI_SR);
clk_disable(host->mck);
#ifdef CONFIG_MMC_ATMELMCI_DMA
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment