Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (42 commits)
  [ARM] Fix tosa build error
  [ARM] 3610/1: Make reboot work on Versatile
  [ARM] 3609/1: S3C24XX: defconfig update for s3c2410_defconfig
  [ARM] 3591/1: Anubis: IDE device definitions
  [ARM] Include asm/hardware.h not asm/arch/hardware.h
  [ARM] 3594/1: Poodle: Add touchscreen support + other updates
  [ARM] 3564/1: sharpsl_pm: Abstract some machine specific parameters
  [ARM] 3561/1: Poodle: Correct the MMC/SD power control
  [ARM] 3593/1: Add reboot and shutdown handlers for Zaurus handhelds
  [ARM] 3599/1: AT91RM9200 remove global variables
  [ARM] 3607/1: AT91RM9200 misc fixes
  [ARM] 3605/1: AT91RM9200 Power Management
  [ARM] 3604/1: AT91RM9200 New boards
  [ARM] 3603/1: AT91RM9200 remove old files
  [ARM] 3592/1: AT91RM9200 Serial driver update
  [ARM] 3590/1: AT91RM9200 Platform devices support
  [ARM] 3589/1: AT91RM9200 DK/EK board update
  [ARM] 3588/1: AT91RM9200 CSB337/637 board update
  [ARM] 3587/1: AT91RM9200 hardware headers
  [ARM] 3586/1: AT91RM9200 header update
  ...

arch/arm/Kconfig

@@ -93,15 +93,49 @@ choice
 	prompt "ARM system type"
 	default ARCH_VERSATILE
 
+config ARCH_AAEC2000
+	bool "Agilent AAEC-2000 based"
+	select ARM_AMBA
+	help
+	  This enables support for systems based on the Agilent AAEC-2000
+
+config ARCH_INTEGRATOR
+	bool "ARM Ltd. Integrator family"
+	select ARM_AMBA
+	select ICST525
+	help
+	  Support for ARM's Integrator platform.
+
+config ARCH_REALVIEW
+	bool "ARM Ltd. RealView family"
+	select ARM_AMBA
+	select ICST307
+	help
+	  This enables support for ARM Ltd RealView boards.
+
+config ARCH_VERSATILE
+	bool "ARM Ltd. Versatile family"
+	select ARM_AMBA
+	select ARM_VIC
+	select ICST307
+	help
+	  This enables support for ARM Ltd Versatile board.
+
+config ARCH_AT91RM9200
+	bool "Atmel AT91RM9200"
+	help
+	  Say Y here if you intend to run this kernel on an Atmel
+	  AT91RM9200-based board.
+
 config ARCH_CLPS7500
-	bool "Cirrus-CL-PS7500FE"
+	bool "Cirrus CL-PS7500FE"
 	select TIMER_ACORN
 	select ISA
 	help
 	  Support for the Cirrus Logic PS7500FE system-on-a-chip.
 
 config ARCH_CLPS711X
-	bool "CLPS711x/EP721x-based"
+	bool "Cirrus Logic CLPS711x/EP721x-based"
 	help
 	  Support for Cirrus Logic 711x/721x based boards.
 
@@ -135,12 +169,22 @@ config ARCH_FOOTBRIDGE
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
-config ARCH_INTEGRATOR
-	bool "Integrator"
-	select ARM_AMBA
-	select ICST525
+config ARCH_NETX
+	bool "Hilscher NetX based"
+	select ARM_VIC
 	help
-	  Support for ARM's Integrator platform.
+	  This enables support for systems based on the Hilscher NetX Soc
+
+config ARCH_H720X
+	bool "Hynix HMS720x-based"
+	select ISA_DMA_API
+	help
+	  This enables support for systems based on the Hynix HMS720x
+
+config ARCH_IMX
+	bool "IMX"
+	help
+	  Support for Motorola's i.MX family of processors (MX1, MXL).
 
 config ARCH_IOP3XX
 	bool "IOP3xx-based"
@@ -178,6 +222,11 @@ config ARCH_L7200
 	  If you have any questions or comments about the Linux kernel port
 	  to this board, send e-mail to <sjhill@cotw.com>.
 
+config ARCH_PNX4008
+	bool "Philips Nexperia PNX4008 Mobile"
+	help
+	  This enables support for Philips PNX4008 mobile platform.
+
 config ARCH_PXA
 	bool "PXA2xx-based"
 	select ARCH_MTD_XIP
@@ -232,49 +281,6 @@ config ARCH_OMAP
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
-config ARCH_VERSATILE
-	bool "Versatile"
-	select ARM_AMBA
-	select ARM_VIC
-	select ICST307
-	help
-	  This enables support for ARM Ltd Versatile board.
-
-config ARCH_REALVIEW
-	bool "RealView"
-	select ARM_AMBA
-	select ICST307
-	help
-	  This enables support for ARM Ltd RealView boards.
-
-config ARCH_IMX
-	bool "IMX"
-	help
-	  Support for Motorola's i.MX family of processors (MX1, MXL).
-
-config ARCH_H720X
-	bool "Hynix-HMS720x-based"
-	select ISA_DMA_API
-	help
-	  This enables support for systems based on the Hynix HMS720x
-
-config ARCH_AAEC2000
-	bool "Agilent AAEC-2000 based"
-	select ARM_AMBA
-	help
-	  This enables support for systems based on the Agilent AAEC-2000
-
-config ARCH_AT91RM9200
-	bool "AT91RM9200"
-	help
-	  Say Y here if you intend to run this kernel on an Atmel
-	  AT91RM9200-based board.
-
-config ARCH_PNX4008
-	bool "Philips Nexperia PNX4008 Mobile"
-	help
-	  This enables support for Philips PNX4008 mobile platform.
-
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
@@ -319,6 +325,8 @@ source "arch/arm/mach-realview/Kconfig"
 
 source "arch/arm/mach-at91rm9200/Kconfig"
 
+source "arch/arm/mach-netx/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool

arch/arm/Makefile

@@ -117,6 +117,7 @@ endif
  machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200
  machine-$(CONFIG_ARCH_EP93XX)     := ep93xx
  machine-$(CONFIG_ARCH_PNX4008)    := pnx4008
+ machine-$(CONFIG_ARCH_NETX)       := netx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.

arch/arm/boot/compressed/head-at91rm9200.S

@@ -49,6 +49,18 @@
 		cmp	r7, r3
 		beq	99f
 
+		@ Embest ATEB9200 : 923
+		mov	r3,	#(MACH_TYPE_ATEB9200 & 0xff)
+		orr	r3, r3,	#(MACH_TYPE_ATEB9200 & 0xff00)
+		cmp	r7, r3
+		beq	99f
+
+		@ Sperry-Sun KAFA : 662
+		mov	r3,	#(MACH_TYPE_KAFA & 0xff)
+		orr	r3, r3,	#(MACH_TYPE_KAFA & 0xff00)
+		cmp	r7, r3
+		beq	99f
+
 		@ Unknown board, use the AT91RM9200DK board
 		@ mov	r7, #MACH_TYPE_AT91RM9200
 		mov	r7,	#(MACH_TYPE_AT91RM9200DK & 0xff)

arch/arm/common/sharpsl_pm.c

@@ -49,13 +49,6 @@
 #define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
 #define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
 
-#define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
-#define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
-#define SHARPSL_CHARGE_ON_ACIN_HIGH    0x9b  /* 6V */
-#define SHARPSL_CHARGE_ON_ACIN_LOW     0x34  /* 2V */
-#define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
-#define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */
-
 /*
  * Prototypes
  */
@@ -82,12 +75,13 @@ DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
 static int get_percentage(int voltage)
 {
 	int i = sharpsl_pm.machinfo->bat_levels - 1;
+	int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
 	struct battery_thresh *thresh;
 
 	if (sharpsl_pm.charge_mode == CHRG_ON)
-		thresh=sharpsl_pm.machinfo->bat_levels_acin;
+		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
 	else
-		thresh=sharpsl_pm.machinfo->bat_levels_noac;
+		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
 
 	while (i > 0 && (voltage > thresh[i].voltage))
 		i--;
@@ -131,7 +125,7 @@ static void sharpsl_battery_thread(void *private_)
 	sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
 
 	/* Corgi cannot confirm when battery fully charged so periodically kick! */
-	if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON)
+	if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
 			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
 		schedule_work(&toggle_charger);
 
@@ -166,11 +160,11 @@ static void sharpsl_battery_thread(void *private_)
 			&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
 			(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
 		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
-			corgibl_limit_intensity(1);
+			sharpsl_pm.machinfo->backlight_limit(1);
 			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
 		}
 	} else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
-		corgibl_limit_intensity(0);
+		sharpsl_pm.machinfo->backlight_limit(0);
 		sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
 	}
 
@@ -418,7 +412,7 @@ static int sharpsl_check_battery_temp(void)
 	val = get_select_val(buff);
 
 	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
-	if (val > SHARPSL_CHARGE_ON_TEMP)
+	if (val > sharpsl_pm.machinfo->charge_on_temp)
 		return -1;
 
 	return 0;
@@ -450,7 +444,7 @@ static int sharpsl_check_battery_voltage(void)
 	val = get_select_val(buff);
 	dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
 
-	if (val < SHARPSL_CHARGE_ON_VOLT)
+	if (val < sharpsl_pm.machinfo->charge_on_volt)
 		return -1;
 
 	return 0;
@@ -468,7 +462,7 @@ static int sharpsl_ac_check(void)
 	temp = get_select_val(buff);
 	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
 
-	if ((temp > SHARPSL_CHARGE_ON_ACIN_HIGH) || (temp < SHARPSL_CHARGE_ON_ACIN_LOW)) {
+	if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
 		dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
 		return -1;
 	}
@@ -627,8 +621,8 @@ static int sharpsl_fatal_check(void)
 	temp = get_select_val(buff);
 	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
 
-	if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) ||
-			(!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT)))
+	if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
+			(!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
 		return -1;
 	return 0;
 }

arch/arm/kernel/process.c

@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/cpu.h>
 #include <linux/elfcore.h>
+#include <linux/pm.h>
 
 #include <asm/leds.h>
 #include <asm/processor.h>
@@ -71,8 +72,36 @@ static int __init hlt_setup(char *__unused)
 __setup("nohlt", nohlt_setup);
 __setup("hlt", hlt_setup);
 
+void arm_machine_restart(char mode)
+{
+	/*
+	 * Clean and disable cache, and turn off interrupts
+	 */
+	cpu_proc_fin();
+
+	/*
+	 * Tell the mm system that we are going to reboot -
+	 * we may need it to insert some 1:1 mappings so that
+	 * soft boot works.
+	 */
+	setup_mm_for_reboot(mode);
+
+	/*
+	 * Now call the architecture specific reboot code.
+	 */
+	arch_reset(mode);
+
+	/*
+	 * Whoops - the architecture was unable to reboot.
+	 * Tell the user!
+	 */
+	mdelay(1000);
+	printk("Reboot failed -- System halted\n");
+	while (1);
+}
+
 /*
- * The following aren't currently used.
+ * Function pointers to optional machine specific functions
  */
 void (*pm_idle)(void);
 EXPORT_SYMBOL(pm_idle);
@@ -80,6 +109,10 @@ EXPORT_SYMBOL(pm_idle);
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
+void (*arm_pm_restart)(char str) = arm_machine_restart;
+EXPORT_SYMBOL_GPL(arm_pm_restart);
+
+
 /*
  * This is our default idle handler.  We need to disable
  * interrupts here to ensure we don't miss a wakeup call.
@@ -151,33 +184,9 @@ void machine_power_off(void)
 		pm_power_off();
 }
 
-
 void machine_restart(char * __unused)
 {
-	/*
-	 * Clean and disable cache, and turn off interrupts
-	 */
-	cpu_proc_fin();
-
-	/*
-	 * Tell the mm system that we are going to reboot -
-	 * we may need it to insert some 1:1 mappings so that
-	 * soft boot works.
-	 */
-	setup_mm_for_reboot(reboot_mode);
-
-	/*
-	 * Now call the architecture specific reboot code.
-	 */
-	arch_reset(reboot_mode);
-
-	/*
-	 * Whoops - the architecture was unable to reboot.
-	 * Tell the user!
-	 */
-	mdelay(1000);
-	printk("Reboot failed -- System halted\n");
-	while (1);
+	arm_pm_restart(reboot_mode);
 }
 
 void __show_regs(struct pt_regs *regs)

arch/arm/mach-at91rm9200/Kconfig

@@ -40,6 +40,18 @@ config MACH_KB9200
 	help
 	  Select this if you are using KwikByte's KB920x board
 
+config MACH_ATEB9200
+	bool "Embest's ATEB9200"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using Embest's ATEB9200 board
+
+config MACH_KAFA
+	bool "Sperry-Sun KAFA board"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using Sperry-Sun's KAFA board
+
 
 comment "AT91RM9200 Feature Selections"
 

arch/arm/mach-at91rm9200/generic.h

@@ -16,3 +16,10 @@ extern struct sys_timer at91rm9200_timer;
 extern void __init at91rm9200_map_io(void);
 
 extern int __init at91_clock_init(unsigned long main_clock);
+struct device;
+extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func);
+
+ /* Power Management */
+extern void at91_irq_suspend(void);
+extern void at91_irq_resume(void);
+

arch/arm/mach-netx/Makefile.boot

+    zreladdr-y			:= 0x80008000
+