Commit 051c69ff authored by Matthias Schiffer's avatar Matthias Schiffer Committed by Lee Jones

mfd: tqmx86: Specify IO port register range more precisely

Registers 0x160..0x17f are unassigned. Use 0x180 as base register and
update offets accordingly.

Also change the size of the range to include 0x19f. While 0x19f is
currently reserved for future extensions, so are several of the previous
registers up to 0x19e, and it is weird to leave out just the last one.

Fixes: 2f17dd34 ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: default avatarMatthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarLee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/db4677ac318b1283c8956f637f409995a30a31c3.1676892223.git.matthias.schiffer@ew.tq-group.com
parent 1be1b236
...@@ -16,8 +16,8 @@ ...@@ -16,8 +16,8 @@
#include <linux/platform_data/i2c-ocores.h> #include <linux/platform_data/i2c-ocores.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#define TQMX86_IOBASE 0x160 #define TQMX86_IOBASE 0x180
#define TQMX86_IOSIZE 0x3f #define TQMX86_IOSIZE 0x20
#define TQMX86_IOBASE_I2C 0x1a0 #define TQMX86_IOBASE_I2C 0x1a0
#define TQMX86_IOSIZE_I2C 0xa #define TQMX86_IOSIZE_I2C 0xa
#define TQMX86_IOBASE_WATCHDOG 0x18b #define TQMX86_IOBASE_WATCHDOG 0x18b
...@@ -25,7 +25,7 @@ ...@@ -25,7 +25,7 @@
#define TQMX86_IOBASE_GPIO 0x18d #define TQMX86_IOBASE_GPIO 0x18d
#define TQMX86_IOSIZE_GPIO 0x4 #define TQMX86_IOSIZE_GPIO 0x4
#define TQMX86_REG_BOARD_ID 0x20 #define TQMX86_REG_BOARD_ID 0x00
#define TQMX86_REG_BOARD_ID_E38M 1 #define TQMX86_REG_BOARD_ID_E38M 1
#define TQMX86_REG_BOARD_ID_50UC 2 #define TQMX86_REG_BOARD_ID_50UC 2
#define TQMX86_REG_BOARD_ID_E38C 3 #define TQMX86_REG_BOARD_ID_E38C 3
...@@ -40,8 +40,8 @@ ...@@ -40,8 +40,8 @@
#define TQMX86_REG_BOARD_ID_E40S 13 #define TQMX86_REG_BOARD_ID_E40S 13
#define TQMX86_REG_BOARD_ID_E40C1 14 #define TQMX86_REG_BOARD_ID_E40C1 14
#define TQMX86_REG_BOARD_ID_E40C2 15 #define TQMX86_REG_BOARD_ID_E40C2 15
#define TQMX86_REG_BOARD_REV 0x21 #define TQMX86_REG_BOARD_REV 0x01
#define TQMX86_REG_IO_EXT_INT 0x26 #define TQMX86_REG_IO_EXT_INT 0x06
#define TQMX86_REG_IO_EXT_INT_NONE 0 #define TQMX86_REG_IO_EXT_INT_NONE 0
#define TQMX86_REG_IO_EXT_INT_7 1 #define TQMX86_REG_IO_EXT_INT_7 1
#define TQMX86_REG_IO_EXT_INT_9 2 #define TQMX86_REG_IO_EXT_INT_9 2
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment