Commit 058ca4a2 authored by Dave Airlie's avatar Dave Airlie

Merge tag 'drm-intel-fixes-2013-07-22' of...

Merge tag 'drm-intel-fixes-2013-07-22' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes

- fixup panel fitter readout for gen2/3 (just quitens dmesg noise)
- fix pft computations for non-autoscaled resolutions (i.e. letter/pillar
  boxing on gen2/3)
- preserve the DDI A/E lane sharing bit (Stéphane Marchesin)
- fix the "rc6 fails to work after resume" regression, big thanks to
  Konstantin Khlebnikov for the patch and debug insight about what
  actually might be going on here
- fix Oops in is_crtc_connector_off (Chris)
- sanitize shared dpll state - our new paranoid state checker tripped up
  over dirt left behind by the BIOS
- correctly restore fences, fixes the "my screen is all messed up after
  resume" regression introduced in the final 3.10 pull request
- quirk backlights harder, this time for Dell XPS13 machines to fix a
  regression (patch from Kamal Mostafa)
- 90% fix for some haswell hangs when accessing registers concurrently,
  the 100% solution is simply too invasive for -fixes and what we have
  here seems to be good enough (Chris)

* tag 'drm-intel-fixes-2013-07-22' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: fix up gt init sequence fallout
  drm/i915: Serialize almost all register access
  drm/i915: quirk no PCH_PWM_ENABLE for Dell XPS13 backlight
  drm/i915: correctly restore fences with objects attached
  drm/i915: Fix dereferencing invalid connectors in is_crtc_connector_off()
  drm/i915: Sanitize shared dpll state
  drm/i915: fix long-standing SNB regression in power consumption after resume v2
  drm/i915: Preserve the DDI_A_4_LANES bit from the bios
  drm/i915: fix pfit regression for non-autoscaled resolutions
  drm/i915: fix up readout of the lvds dither bit on gen2/3
parents 27ddabc3 181d1b9e
......@@ -1495,6 +1495,14 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
dev_priv->dev = dev;
dev_priv->info = info;
spin_lock_init(&dev_priv->irq_lock);
spin_lock_init(&dev_priv->gpu_error.lock);
spin_lock_init(&dev_priv->rps.lock);
spin_lock_init(&dev_priv->backlight.lock);
mutex_init(&dev_priv->dpio_lock);
mutex_init(&dev_priv->rps.hw_lock);
mutex_init(&dev_priv->modeset_restore_lock);
i915_dump_device_info(dev_priv);
if (i915_get_bridge_dev(dev)) {
......@@ -1585,6 +1593,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
intel_detect_pch(dev);
intel_irq_init(dev);
intel_gt_sanitize(dev);
intel_gt_init(dev);
/* Try to make sure MCHBAR is enabled before poking at it */
......@@ -1610,15 +1619,6 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
if (!IS_I945G(dev) && !IS_I945GM(dev))
pci_enable_msi(dev->pdev);
spin_lock_init(&dev_priv->irq_lock);
spin_lock_init(&dev_priv->gpu_error.lock);
spin_lock_init(&dev_priv->rps.lock);
spin_lock_init(&dev_priv->backlight.lock);
mutex_init(&dev_priv->dpio_lock);
mutex_init(&dev_priv->rps.hw_lock);
mutex_init(&dev_priv->modeset_restore_lock);
dev_priv->num_plane = 1;
if (IS_VALLEYVIEW(dev))
dev_priv->num_plane = 2;
......
......@@ -706,7 +706,7 @@ static int i915_drm_thaw(struct drm_device *dev)
{
int error = 0;
intel_gt_reset(dev);
intel_gt_sanitize(dev);
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
mutex_lock(&dev->struct_mutex);
......@@ -732,7 +732,7 @@ int i915_resume(struct drm_device *dev)
pci_set_master(dev->pdev);
intel_gt_reset(dev);
intel_gt_sanitize(dev);
/*
* Platforms with opregion should have sane BIOS, older ones (gen3 and
......@@ -1253,21 +1253,21 @@ hsw_unclaimed_reg_check(struct drm_i915_private *dev_priv, u32 reg)
#define __i915_read(x, y) \
u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \
unsigned long irqflags; \
u##x val = 0; \
spin_lock_irqsave(&dev_priv->gt_lock, irqflags); \
if (IS_GEN5(dev_priv->dev)) \
ilk_dummy_write(dev_priv); \
if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \
unsigned long irqflags; \
spin_lock_irqsave(&dev_priv->gt_lock, irqflags); \
if (dev_priv->forcewake_count == 0) \
dev_priv->gt.force_wake_get(dev_priv); \
val = read##y(dev_priv->regs + reg); \
if (dev_priv->forcewake_count == 0) \
dev_priv->gt.force_wake_put(dev_priv); \
spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); \
} else { \
val = read##y(dev_priv->regs + reg); \
} \
spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); \
trace_i915_reg_rw(false, reg, val, sizeof(val)); \
return val; \
}
......@@ -1280,8 +1280,10 @@ __i915_read(64, q)
#define __i915_write(x, y) \
void i915_write##x(struct drm_i915_private *dev_priv, u32 reg, u##x val) { \
unsigned long irqflags; \
u32 __fifo_ret = 0; \
trace_i915_reg_rw(true, reg, val, sizeof(val)); \
spin_lock_irqsave(&dev_priv->gt_lock, irqflags); \
if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \
__fifo_ret = __gen6_gt_wait_for_fifo(dev_priv); \
} \
......@@ -1293,6 +1295,7 @@ void i915_write##x(struct drm_i915_private *dev_priv, u32 reg, u##x val) { \
gen6_gt_check_fifodbg(dev_priv); \
} \
hsw_unclaimed_reg_check(dev_priv, reg); \
spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); \
}
__i915_write(8, b)
__i915_write(16, w)
......
......@@ -555,6 +555,7 @@ enum intel_sbi_destination {
#define QUIRK_PIPEA_FORCE (1<<0)
#define QUIRK_LVDS_SSC_DISABLE (1<<1)
#define QUIRK_INVERT_BRIGHTNESS (1<<2)
#define QUIRK_NO_PCH_PWM_ENABLE (1<<3)
struct intel_fbdev;
struct intel_fbc_work;
......@@ -1583,7 +1584,7 @@ void i915_handle_error(struct drm_device *dev, bool wedged);
extern void intel_irq_init(struct drm_device *dev);
extern void intel_hpd_init(struct drm_device *dev);
extern void intel_gt_init(struct drm_device *dev);
extern void intel_gt_reset(struct drm_device *dev);
extern void intel_gt_sanitize(struct drm_device *dev);
void i915_error_state_free(struct kref *error_ref);
......
......@@ -2258,7 +2258,17 @@ void i915_gem_restore_fences(struct drm_device *dev)
for (i = 0; i < dev_priv->num_fence_regs; i++) {
struct drm_i915_fence_reg *reg = &dev_priv->fence_regs[i];
i915_gem_write_fence(dev, i, reg->obj);
/*
* Commit delayed tiling changes if we have an object still
* attached to the fence, otherwise just clear the fence.
*/
if (reg->obj) {
i915_gem_object_update_fence(reg->obj, reg,
reg->obj->tiling_mode);
} else {
i915_gem_write_fence(dev, i, NULL);
}
}
}
......@@ -2795,6 +2805,10 @@ static void i915_gem_write_fence(struct drm_device *dev, int reg,
if (i915_gem_object_needs_mb(dev_priv->fence_regs[reg].obj))
mb();
WARN(obj && (!obj->stride || !obj->tiling_mode),
"bogus fence setup with stride: 0x%x, tiling mode: %i\n",
obj->stride, obj->tiling_mode);
switch (INTEL_INFO(dev)->gen) {
case 7:
case 6:
......@@ -2836,6 +2850,7 @@ static void i915_gem_object_update_fence(struct drm_i915_gem_object *obj,
fence->obj = NULL;
list_del_init(&fence->lru_list);
}
obj->fence_dirty = false;
}
static int
......@@ -2965,7 +2980,6 @@ i915_gem_object_get_fence(struct drm_i915_gem_object *obj)
return 0;
i915_gem_object_update_fence(obj, reg, enable);
obj->fence_dirty = false;
return 0;
}
......
......@@ -301,7 +301,7 @@ static void intel_ddi_mode_set(struct drm_encoder *encoder,
struct intel_digital_port *intel_dig_port =
enc_to_dig_port(encoder);
intel_dp->DP = intel_dig_port->port_reversal |
intel_dp->DP = intel_dig_port->saved_port_bits |
DDI_BUF_CTL_ENABLE | DDI_BUF_EMP_400MV_0DB_HSW;
intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count);
......@@ -1109,7 +1109,8 @@ static void intel_enable_ddi(struct intel_encoder *intel_encoder)
* enabling the port.
*/
I915_WRITE(DDI_BUF_CTL(port),
intel_dig_port->port_reversal | DDI_BUF_CTL_ENABLE);
intel_dig_port->saved_port_bits |
DDI_BUF_CTL_ENABLE);
} else if (type == INTEL_OUTPUT_EDP) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
......@@ -1347,8 +1348,9 @@ void intel_ddi_init(struct drm_device *dev, enum port port)
intel_encoder->get_config = intel_ddi_get_config;
intel_dig_port->port = port;
intel_dig_port->port_reversal = I915_READ(DDI_BUF_CTL(port)) &
DDI_BUF_PORT_REVERSAL;
intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) &
(DDI_BUF_PORT_REVERSAL |
DDI_A_4_LANES);
intel_dig_port->dp.output_reg = DDI_BUF_CTL(port);
intel_encoder->type = INTEL_OUTPUT_UNKNOWN;
......
......@@ -4913,22 +4913,19 @@ static void i9xx_get_pfit_config(struct intel_crtc *crtc,
uint32_t tmp;
tmp = I915_READ(PFIT_CONTROL);
if (!(tmp & PFIT_ENABLE))
return;
/* Check whether the pfit is attached to our pipe. */
if (INTEL_INFO(dev)->gen < 4) {
if (crtc->pipe != PIPE_B)
return;
/* gen2/3 store dither state in pfit control, needs to match */
pipe_config->gmch_pfit.control = tmp & PANEL_8TO6_DITHER_ENABLE;
} else {
if ((tmp & PFIT_PIPE_MASK) != (crtc->pipe << PFIT_PIPE_SHIFT))
return;
}
if (!(tmp & PFIT_ENABLE))
return;
pipe_config->gmch_pfit.control = I915_READ(PFIT_CONTROL);
pipe_config->gmch_pfit.control = tmp;
pipe_config->gmch_pfit.pgm_ratios = I915_READ(PFIT_PGM_RATIOS);
if (INTEL_INFO(dev)->gen < 5)
pipe_config->gmch_pfit.lvds_border_bits =
......@@ -8317,6 +8314,8 @@ check_shared_dpll_state(struct drm_device *dev)
pll->active, pll->refcount);
WARN(pll->active && !pll->on,
"pll in active use but not on in sw tracking\n");
WARN(pll->on && !pll->active,
"pll in on but not on in use in sw tracking\n");
WARN(pll->on != active,
"pll on state mismatch (expected %i, found %i)\n",
pll->on, active);
......@@ -8541,15 +8540,20 @@ static void intel_set_config_restore_state(struct drm_device *dev,
}
static bool
is_crtc_connector_off(struct drm_crtc *crtc, struct drm_connector *connectors,
int num_connectors)
is_crtc_connector_off(struct drm_mode_set *set)
{
int i;
for (i = 0; i < num_connectors; i++)
if (connectors[i].encoder &&
connectors[i].encoder->crtc == crtc &&
connectors[i].dpms != DRM_MODE_DPMS_ON)
if (set->num_connectors == 0)
return false;
if (WARN_ON(set->connectors == NULL))
return false;
for (i = 0; i < set->num_connectors; i++)
if (set->connectors[i]->encoder &&
set->connectors[i]->encoder->crtc == set->crtc &&
set->connectors[i]->dpms != DRM_MODE_DPMS_ON)
return true;
return false;
......@@ -8562,9 +8566,7 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set,
/* We should be able to check here if the fb has the same properties
* and then just flip_or_move it */
if (set->connectors != NULL &&
is_crtc_connector_off(set->crtc, *set->connectors,
set->num_connectors)) {
if (is_crtc_connector_off(set)) {
config->mode_changed = true;
} else if (set->crtc->fb != set->fb) {
/* If we have no fb then treat it as a full mode set */
......@@ -9398,6 +9400,17 @@ static void quirk_invert_brightness(struct drm_device *dev)
DRM_INFO("applying inverted panel brightness quirk\n");
}
/*
* Some machines (Dell XPS13) suffer broken backlight controls if
* BLM_PCH_PWM_ENABLE is set.
*/
static void quirk_no_pcm_pwm_enable(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
dev_priv->quirks |= QUIRK_NO_PCH_PWM_ENABLE;
DRM_INFO("applying no-PCH_PWM_ENABLE quirk\n");
}
struct intel_quirk {
int device;
int subsystem_vendor;
......@@ -9467,6 +9480,11 @@ static struct intel_quirk intel_quirks[] = {
/* Acer Aspire 4736Z */
{ 0x2a42, 0x1025, 0x0260, quirk_invert_brightness },
/* Dell XPS13 HD Sandy Bridge */
{ 0x0116, 0x1028, 0x052e, quirk_no_pcm_pwm_enable },
/* Dell XPS13 HD and XPS13 FHD Ivy Bridge */
{ 0x0166, 0x1028, 0x058b, quirk_no_pcm_pwm_enable },
};
static void intel_init_quirks(struct drm_device *dev)
......@@ -9817,8 +9835,8 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
}
pll->refcount = pll->active;
DRM_DEBUG_KMS("%s hw state readout: refcount %i\n",
pll->name, pll->refcount);
DRM_DEBUG_KMS("%s hw state readout: refcount %i, on %i\n",
pll->name, pll->refcount, pll->on);
}
list_for_each_entry(encoder, &dev->mode_config.encoder_list,
......@@ -9869,6 +9887,7 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
struct drm_plane *plane;
struct intel_crtc *crtc;
struct intel_encoder *encoder;
int i;
intel_modeset_readout_hw_state(dev);
......@@ -9884,6 +9903,18 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
intel_dump_pipe_config(crtc, &crtc->config, "[setup_hw_state]");
}
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
if (!pll->on || pll->active)
continue;
DRM_DEBUG_KMS("%s enabled but not in use, disabling\n", pll->name);
pll->disable(dev_priv, pll);
pll->on = false;
}
if (force_restore) {
/*
* We need to use raw interfaces for restoring state to avoid
......
......@@ -504,7 +504,7 @@ struct intel_dp {
struct intel_digital_port {
struct intel_encoder base;
enum port port;
u32 port_reversal;
u32 saved_port_bits;
struct intel_dp dp;
struct intel_hdmi hdmi;
};
......
......@@ -109,6 +109,13 @@ static void intel_lvds_get_config(struct intel_encoder *encoder,
flags |= DRM_MODE_FLAG_PVSYNC;
pipe_config->adjusted_mode.flags |= flags;
/* gen2/3 store dither state in pfit control, needs to match */
if (INTEL_INFO(dev)->gen < 4) {
tmp = I915_READ(PFIT_CONTROL);
pipe_config->gmch_pfit.control |= tmp & PANEL_8TO6_DITHER_ENABLE;
}
}
/* The LVDS pin pair needs to be on before the DPLLs are enabled.
......@@ -290,14 +297,11 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
intel_pch_panel_fitting(intel_crtc, pipe_config,
intel_connector->panel.fitting_mode);
return true;
} else {
intel_gmch_panel_fitting(intel_crtc, pipe_config,
intel_connector->panel.fitting_mode);
}
drm_mode_set_crtcinfo(adjusted_mode, 0);
pipe_config->timings_set = true;
}
/*
* XXX: It would be nice to support lower refresh rates on the
......
......@@ -194,6 +194,9 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
adjusted_mode->vdisplay == mode->vdisplay)
goto out;
drm_mode_set_crtcinfo(adjusted_mode, 0);
pipe_config->timings_set = true;
switch (fitting_mode) {
case DRM_MODE_SCALE_CENTER:
/*
......@@ -580,7 +583,8 @@ void intel_panel_enable_backlight(struct drm_device *dev,
POSTING_READ(reg);
I915_WRITE(reg, tmp | BLM_PWM_ENABLE);
if (HAS_PCH_SPLIT(dev)) {
if (HAS_PCH_SPLIT(dev) &&
!(dev_priv->quirks & QUIRK_NO_PCH_PWM_ENABLE)) {
tmp = I915_READ(BLC_PWM_PCH_CTL1);
tmp |= BLM_PCH_PWM_ENABLE;
tmp &= ~BLM_PCH_OVERRIDE_ENABLE;
......
......@@ -5476,7 +5476,7 @@ static void vlv_force_wake_put(struct drm_i915_private *dev_priv)
gen6_gt_check_fifodbg(dev_priv);
}
void intel_gt_reset(struct drm_device *dev)
void intel_gt_sanitize(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
......@@ -5487,6 +5487,10 @@ void intel_gt_reset(struct drm_device *dev)
if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
__gen6_gt_force_wake_mt_reset(dev_priv);
}
/* BIOS often leaves RC6 enabled, but disable it for hw init */
if (INTEL_INFO(dev)->gen >= 6)
intel_disable_gt_powersave(dev);
}
void intel_gt_init(struct drm_device *dev)
......@@ -5495,8 +5499,6 @@ void intel_gt_init(struct drm_device *dev)
spin_lock_init(&dev_priv->gt_lock);
intel_gt_reset(dev);
if (IS_VALLEYVIEW(dev)) {
dev_priv->gt.force_wake_get = vlv_force_wake_get;
dev_priv->gt.force_wake_put = vlv_force_wake_put;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment