Automatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6.git/

Documentation/filesystems/sysfs-pci.txt

@@ -7,7 +7,6 @@ that support it.  For example, a given bus might look like this:
      |-- 0000:17:00.0
      |   |-- class
      |   |-- config
-     |   |-- detach_state
      |   |-- device
      |   |-- irq
      |   |-- local_cpus
@@ -19,7 +18,7 @@ that support it.  For example, a given bus might look like this:
      |   |-- subsystem_device
      |   |-- subsystem_vendor
      |   `-- vendor
-     `-- detach_state
+     `-- ...
 
 The topmost element describes the PCI domain and bus number.  In this case,
 the domain number is 0000 and the bus number is 17 (both values are in hex).
@@ -31,7 +30,6 @@ files, each with their own function.
        ----		   --------
        class		   PCI class (ascii, ro)
        config		   PCI config space (binary, rw)
-       detach_state	   connection status (bool, rw)
        device		   PCI device (ascii, ro)
        irq		   IRQ number (ascii, ro)
        local_cpus	   nearby CPU mask (cpumask, ro)

Documentation/power/devices.txt

@@ -207,27 +207,6 @@ SYSTEM_SHUTDOWN, I do not understand this one too much. probably event
 #READY_AFTER_RESUME
 #
 
-Driver Detach Power Management
-
-The kernel now supports the ability to place a device in a low-power
-state when it is detached from its driver, which happens when its
-module is removed. 
-
-Each device contains a 'detach_state' file in its sysfs directory
-which can be used to control this state. Reading from this file
-displays what the current detach state is set to. This is 0 (On) by
-default. A user may write a positive integer value to this file in the
-range of 1-4 inclusive. 
-
-A value of 1-3 will indicate the device should be placed in that
-low-power state, which will cause ->suspend() to be called for that
-device. A value of 4 indicates that the device should be shutdown, so
-->shutdown() will be called for that device. 
-
-The driver is responsible for reinitializing the device when the
-module is re-inserted during it's ->probe() (or equivalent) method. 
-The driver core will not call any extra functions when binding the
-device to the driver. 
 
 pm_message_t meaning
 

Documentation/powerpc/hvcs.txt

@@ -348,7 +348,7 @@ looks like the following:
 
 	Pow5:/sys/bus/vio/drivers/hvcs/30000004 # ls
 	.   current_vty   devspec       name          partner_vtys
-	..  detach_state  index    partner_clcs  vterm_state
+	..  index         partner_clcs  vterm_state
 
 Each entry is provided, by default with a "name" attribute.  Reading the
 "name" attribute will reveal the device type as shown in the following

drivers/base/Makefile

 # Makefile for the Linux device tree
 
-obj-y			:= core.o sys.o interface.o bus.o \
+obj-y			:= core.o sys.o bus.o \
 			   driver.o class.o class_simple.o platform.o \
 			   cpu.o firmware.o init.o map.o dmapool.o \
 			   attribute_container.o transport_class.o

drivers/base/bus.c

@@ -390,7 +390,6 @@ void device_release_driver(struct device * dev)
 		sysfs_remove_link(&drv->kobj, kobject_name(&dev->kobj));
 		sysfs_remove_link(&dev->kobj, "driver");
 		list_del_init(&dev->driver_list);
-		device_detach_shutdown(dev);
 		if (drv->remove)
 			drv->remove(dev);
 		dev->driver = NULL;

drivers/base/core.c

@@ -31,8 +31,6 @@ int (*platform_notify_remove)(struct device * dev) = NULL;
 #define to_dev(obj) container_of(obj, struct device, kobj)
 #define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr)
 
-extern struct attribute * dev_default_attrs[];
-
 static ssize_t
 dev_attr_show(struct kobject * kobj, struct attribute * attr, char * buf)
 {
@@ -89,7 +87,6 @@ static void device_release(struct kobject * kobj)
 static struct kobj_type ktype_device = {
 	.release	= device_release,
 	.sysfs_ops	= &dev_sysfs_ops,
-	.default_attrs	= dev_default_attrs,
 };
 
 

drivers/base/interface.c

-/*
- * drivers/base/interface.c - common driverfs interface that's exported to
- * 	the world for all devices.
- *
- * Copyright (c) 2002-3 Patrick Mochel
- * Copyright (c) 2002-3 Open Source Development Labs
- *
- * This file is released under the GPLv2
- *
- */
-
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/stat.h>
-#include <linux/string.h>
-
-/**
- *	detach_state - control the default power state for the device.
- *
- *	This is the state the device enters when it's driver module is
- *	unloaded. The value is an unsigned integer, in the range of 0-4.
- *	'0' indicates 'On', so no action will be taken when the driver is
- *	unloaded. This is the default behavior.
- *	'4' indicates 'Off', meaning the driver core will call the driver's
- *	shutdown method to quiesce the device.
- *	1-3 indicate a low-power state for the device to enter via the
- *	driver's suspend method.
- */
-
-static ssize_t detach_show(struct device * dev, char * buf)
-{
-	return sprintf(buf, "%u\n", dev->detach_state);
-}
-
-static ssize_t detach_store(struct device * dev, const char * buf, size_t n)
-{
-	u32 state;
-	state = simple_strtoul(buf, NULL, 10);
-	if (state > 4)
-		return -EINVAL;
-	dev->detach_state = state;
-	return n;
-}
-
-static DEVICE_ATTR(detach_state, 0644, detach_show, detach_store);
-
-
-struct attribute * dev_default_attrs[] = {
-	&dev_attr_detach_state.attr,
-	NULL,
-};

drivers/base/power/power.h

-
-
-enum {
-	DEVICE_PM_ON,
-	DEVICE_PM1,
-	DEVICE_PM2,
-	DEVICE_PM3,
-	DEVICE_PM_OFF,
-};
-
 /*
  * shutdown.c
  */
 
-extern int device_detach_shutdown(struct device *);
 extern void device_shutdown(void);
 
 

drivers/base/power/resume.c

@@ -22,8 +22,17 @@ extern int sysdev_resume(void);
 
 int resume_device(struct device * dev)
 {
-	if (dev->bus && dev->bus->resume)
+	if (dev->power.pm_parent
+			&& dev->power.pm_parent->power.power_state) {
+		dev_err(dev, "PM: resume from %d, parent %s still %d\n",
+			dev->power.power_state,
+			dev->power.pm_parent->bus_id,
+			dev->power.pm_parent->power.power_state);
+	}
+	if (dev->bus && dev->bus->resume) {
+		dev_dbg(dev,"resuming\n");
 		return dev->bus->resume(dev);
+	}
 	return 0;
 }
 

drivers/base/power/shutdown.c

@@ -19,20 +19,6 @@
 extern struct subsystem devices_subsys;
 
 
-int device_detach_shutdown(struct device * dev)
-{
-	if (!dev->detach_state)
-		return 0;
-
-	if (dev->detach_state == DEVICE_PM_OFF) {
-		if (dev->driver && dev->driver->shutdown)
-			dev->driver->shutdown(dev);
-		return 0;
-	}
-	return dpm_runtime_suspend(dev, dev->detach_state);
-}
-
-
 /**
  * We handle system devices differently - we suspend and shut them
  * down last and resume them first. That way, we don't do anything stupid like
@@ -52,13 +38,12 @@ void device_shutdown(void)
 	struct device * dev;
 
 	down_write(&devices_subsys.rwsem);
-	list_for_each_entry_reverse(dev, &devices_subsys.kset.list, kobj.entry) {
-		pr_debug("shutting down %s: ", dev->bus_id);
+	list_for_each_entry_reverse(dev, &devices_subsys.kset.list,
+				kobj.entry) {
 		if (dev->driver && dev->driver->shutdown) {
-			pr_debug("Ok\n");
+			dev_dbg(dev, "shutdown\n");
 			dev->driver->shutdown(dev);
-		} else
-			pr_debug("Ignored.\n");
+		}
 	}
 	up_write(&devices_subsys.rwsem);
 

drivers/base/power/suspend.c

@@ -39,12 +39,25 @@ int suspend_device(struct device * dev, pm_message_t state)
 {
 	int error = 0;
 
-	dev_dbg(dev, "suspending\n");
+	if (dev->power.power_state) {
+		dev_dbg(dev, "PM: suspend %d-->%d\n",
+			dev->power.power_state, state);
+	}
+	if (dev->power.pm_parent
+			&& dev->power.pm_parent->power.power_state) {
+		dev_err(dev,
+			"PM: suspend %d->%d, parent %s already %d\n",
+			dev->power.power_state, state,
+			dev->power.pm_parent->bus_id,
+			dev->power.pm_parent->power.power_state);
+	}
 
 	dev->power.prev_state = dev->power.power_state;
 
-	if (dev->bus && dev->bus->suspend && !dev->power.power_state)
+	if (dev->bus && dev->bus->suspend && !dev->power.power_state) {
+		dev_dbg(dev, "suspending\n");
 		error = dev->bus->suspend(dev, state);
+	}
 
 	return error;
 }

include/linux/device.h

@@ -273,9 +273,6 @@ struct device {
 					   BIOS data relevant to device) */
 	struct dev_pm_info	power;
 
-	u32		detach_state;	/* State to enter when device is
-					   detached from its driver. */
-
 	u64		*dma_mask;	/* dma mask (if dma'able device) */
 	u64		coherent_dma_mask;/* Like dma_mask, but for
 					     alloc_coherent mappings as

kernel/power/main.c

@@ -156,14 +156,14 @@ static int enter_state(suspend_state_t state)
 		goto Unlock;
 	}
 
-	pr_debug("PM: Preparing system for suspend\n");
+	pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
 	if ((error = suspend_prepare(state)))
 		goto Unlock;
 
-	pr_debug("PM: Entering state.\n");
+	pr_debug("PM: Entering %s sleep\n", pm_states[state]);
 	error = suspend_enter(state);
 
-	pr_debug("PM: Finishing up.\n");
+	pr_debug("PM: Finishing wakeup.\n");
 	suspend_finish(state);
  Unlock:
 	up(&pm_sem);