Commit 06accc87 authored by Andrii Nakryiko's avatar Andrii Nakryiko Committed by Alexei Starovoitov

bpf: add support for open-coded iterator loops

Teach verifier about the concept of the open-coded (or inline) iterators.

This patch adds generic iterator loop verification logic, new STACK_ITER
stack slot type to contain iterator state, and necessary kfunc plumbing
for iterator's constructor, destructor and next methods. Next patch
implements first specific iterator (numbers iterator for implementing
for() loop logic). Such split allows to have more focused commits for
verifier logic and separate commit that we could point later to
demonstrating  what does it take to add a new kind of iterator.

Each kind of iterator has its own associated struct bpf_iter_<type>,
where <type> denotes a specific type of iterator. struct bpf_iter_<type>
state is supposed to live on BPF program stack, so there will be no way
to change its size later on without breaking backwards compatibility, so
choose wisely! But given this struct is specific to a given <type> of
iterator, this allows a lot of flexibility: simple iterators could be
fine with just one stack slot (8 bytes), like numbers iterator in the
next patch, while some other more complicated iterators might need way
more to keep their iterator state. Either way, such design allows to
avoid runtime memory allocations, which otherwise would be necessary if
we fixed on-the-stack size and it turned out to be too small for a given
iterator implementation.

The way BPF verifier logic is implemented, there are no artificial
restrictions on a number of active iterators, it should work correctly
using multiple active iterators at the same time. This also means you
can have multiple nested iteration loops. struct bpf_iter_<type>
reference can be safely passed to subprograms as well.

General flow is easiest to demonstrate with a simple example using
number iterator implemented in next patch. Here's the simplest possible
loop:

  struct bpf_iter_num it;
  int *v;

  bpf_iter_num_new(&it, 2, 5);
  while ((v = bpf_iter_num_next(&it))) {
      bpf_printk("X = %d", *v);
  }
  bpf_iter_num_destroy(&it);

Above snippet should output "X = 2", "X = 3", "X = 4". Note that 5 is
exclusive and is not returned. This matches similar APIs (e.g., slices
in Go or Rust) that implement a range of elements, where end index is
non-inclusive.

In the above example, we see a trio of function:
  - constructor, bpf_iter_num_new(), which initializes iterator state
  (struct bpf_iter_num it) on the stack. If any of the input arguments
  are invalid, constructor should make sure to still initialize it such
  that subsequent bpf_iter_num_next() calls will return NULL. I.e., on
  error, return error and construct empty iterator.
  - next method, bpf_iter_num_next(), which accepts pointer to iterator
  state and produces an element. Next method should always return
  a pointer. The contract between BPF verifier is that next method will
  always eventually return NULL when elements are exhausted. Once NULL is
  returned, subsequent next calls should keep returning NULL. In the
  case of numbers iterator, bpf_iter_num_next() returns a pointer to an int
  (storage for this integer is inside the iterator state itself),
  which can be dereferenced after corresponding NULL check.
  - once done with the iterator, it's mandated that user cleans up its
  state with the call to destructor, bpf_iter_num_destroy() in this
  case. Destructor frees up any resources and marks stack space used by
  struct bpf_iter_num as usable for something else.

Any other iterator implementation will have to implement at least these
three methods. It is enforced that for any given type of iterator only
applicable constructor/destructor/next are callable. I.e., verifier
ensures you can't pass number iterator state into, say, cgroup
iterator's next method.

It is important to keep the naming pattern consistent to be able to
create generic macros to help with BPF iter usability. E.g., one
of the follow up patches adds generic bpf_for_each() macro to bpf_misc.h
in selftests, which allows to utilize iterator "trio" nicely without
having to code the above somewhat tedious loop explicitly every time.
This is enforced at kfunc registration point by one of the previous
patches in this series.

At the implementation level, iterator state tracking for verification
purposes is very similar to dynptr. We add STACK_ITER stack slot type,
reserve necessary number of slots, depending on
sizeof(struct bpf_iter_<type>), and keep track of necessary extra state
in the "main" slot, which is marked with non-zero ref_obj_id. Other
slots are also marked as STACK_ITER, but have zero ref_obj_id. This is
simpler than having a separate "is_first_slot" flag.

Another big distinction is that STACK_ITER is *always refcounted*, which
simplifies implementation without sacrificing usability. So no need for
extra "iter_id", no need to anticipate reuse of STACK_ITER slots for new
constructors, etc. Keeping it simple here.

As far as the verification logic goes, there are two extensive comments:
in process_iter_next_call() and iter_active_depths_differ() explaining
some important and sometimes subtle aspects. Please refer to them for
details.

But from 10,000-foot point of view, next methods are the points of
forking a verification state, which are conceptually similar to what
verifier is doing when validating conditional jump. We branch out at
a `call bpf_iter_<type>_next` instruction and simulate two outcomes:
NULL (iteration is done) and non-NULL (new element is returned). NULL is
simulated first and is supposed to reach exit without looping. After
that non-NULL case is validated and it either reaches exit (for trivial
examples with no real loop), or reaches another `call bpf_iter_<type>_next`
instruction with the state equivalent to already (partially) validated
one. State equivalency at that point means we technically are going to
be looping forever without "breaking out" out of established "state
envelope" (i.e., subsequent iterations don't add any new knowledge or
constraints to the verifier state, so running 1, 2, 10, or a million of
them doesn't matter). But taking into account the contract stating that
iterator next method *has to* return NULL eventually, we can conclude
that loop body is safe and will eventually terminate. Given we validated
logic outside of the loop (NULL case), and concluded that loop body is
safe (though potentially looping many times), verifier can claim safety
of the overall program logic.

The rest of the patch is necessary plumbing for state tracking, marking,
validation, and necessary further kfunc plumbing to allow implementing
iterator constructor, destructor, and next methods.
Signed-off-by: default avatarAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-4-andrii@kernel.orgSigned-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
parent 215bf496
......@@ -61,6 +61,12 @@ struct bpf_active_lock {
#define ITER_PREFIX "bpf_iter_"
enum bpf_iter_state {
BPF_ITER_STATE_INVALID, /* for non-first slot */
BPF_ITER_STATE_ACTIVE,
BPF_ITER_STATE_DRAINED,
};
struct bpf_reg_state {
/* Ordering of fields matters. See states_equal() */
enum bpf_reg_type type;
......@@ -105,6 +111,18 @@ struct bpf_reg_state {
bool first_slot;
} dynptr;
/* For bpf_iter stack slots */
struct {
/* BTF container and BTF type ID describing
* struct bpf_iter_<type> of an iterator state
*/
struct btf *btf;
u32 btf_id;
/* packing following two fields to fit iter state into 16 bytes */
enum bpf_iter_state state:2;
int depth:30;
} iter;
/* Max size from any of the above. */
struct {
unsigned long raw1;
......@@ -143,6 +161,8 @@ struct bpf_reg_state {
* same reference to the socket, to determine proper reference freeing.
* For stack slots that are dynptrs, this is used to track references to
* the dynptr to determine proper reference freeing.
* Similarly to dynptrs, we use ID to track "belonging" of a reference
* to a specific instance of bpf_iter.
*/
u32 id;
/* PTR_TO_SOCKET and PTR_TO_TCP_SOCK could be a ptr returned
......@@ -213,9 +233,11 @@ enum bpf_stack_slot_type {
* is stored in bpf_stack_state->spilled_ptr.dynptr.type
*/
STACK_DYNPTR,
STACK_ITER,
};
#define BPF_REG_SIZE 8 /* size of eBPF register in bytes */
#define BPF_DYNPTR_SIZE sizeof(struct bpf_dynptr_kern)
#define BPF_DYNPTR_NR_SLOTS (BPF_DYNPTR_SIZE / BPF_REG_SIZE)
......@@ -450,6 +472,7 @@ struct bpf_insn_aux_data {
bool sanitize_stack_spill; /* subject to Spectre v4 sanitation */
bool zext_dst; /* this insn zero extends dst reg */
bool storage_get_func_atomic; /* bpf_*_storage_get() with atomic memory alloc */
bool is_iter_next; /* bpf_iter_<type>_next() kfunc call */
u8 alu_state; /* used in combination with alu_limit */
/* below fields are initialized once */
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment