Commit 06d123e0 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge branch 'at91/macb' into next/drivers

parents 4966eba0 2839038b
* Cadence MACB/GEM Ethernet controller
Required properties:
- compatible: Should be "cdns,[<chip>-]{macb|gem}"
Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs.
Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
Use "cnds,pc302-gem" for Picochip picoXcell pc302 and later devices based on
the Cadence GEM, or the generic form: "cdns,gem".
- reg: Address and length of the register set for the device
- interrupts: Should contain macb interrupt
- phy-mode: String, operation mode of the PHY interface.
Supported values are: "mii", "rmii", "gmii", "rgmii".
Optional properties:
- local-mac-address: 6 bytes, mac address
Examples:
macb0: ethernet@fffc4000 {
compatible = "cdns,at32ap7000-macb";
reg = <0xfffc4000 0x4000>;
interrupts = <21>;
phy-mode = "rmii";
local-mac-address = [3a 0e 03 04 05 06];
};
......@@ -114,6 +114,13 @@ usart5: serial@fffd8000 {
atmel,use-dma-tx;
status = "disabled";
};
macb0: ethernet@fffc4000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffc4000 0x100>;
interrupts = <21>;
status = "disabled";
};
};
};
};
......@@ -101,6 +101,13 @@ usart3: serial@fff98000 {
atmel,use-dma-tx;
status = "disabled";
};
macb0: ethernet@fffbc000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffbc000 0x100>;
interrupts = <25>;
status = "disabled";
};
};
};
};
......@@ -30,6 +30,11 @@ dbgu: serial@ffffee00 {
usart1: serial@fff90000 {
status = "okay";
};
macb0: ethernet@fffbc000 {
phy-mode = "rmii";
status = "okay";
};
};
};
};
......@@ -25,6 +25,11 @@ apb {
dbgu: serial@fffff200 {
status = "okay";
};
macb0: ethernet@fffc4000 {
phy-mode = "rmii";
status = "okay";
};
};
};
};
......@@ -256,8 +256,7 @@ static void enable_phyirq(struct net_device *dev)
unsigned int dsintr, irq_number;
int status;
irq_number = lp->board_data.phy_irq_pin;
if (!irq_number) {
if (!gpio_is_valid(lp->board_data.phy_irq_pin)) {
/*
* PHY doesn't have an IRQ pin (RTL8201, DP83847, AC101L),
* or board does not have it connected.
......@@ -266,6 +265,7 @@ static void enable_phyirq(struct net_device *dev)
return;
}
irq_number = lp->board_data.phy_irq_pin;
status = request_irq(irq_number, at91ether_phy_interrupt, 0, dev->name, dev);
if (status) {
printk(KERN_ERR "at91_ether: PHY IRQ %d request failed - status %d!\n", irq_number, status);
......@@ -320,8 +320,7 @@ static void disable_phyirq(struct net_device *dev)
unsigned int dsintr;
unsigned int irq_number;
irq_number = lp->board_data.phy_irq_pin;
if (!irq_number) {
if (!gpio_is_valid(lp->board_data.phy_irq_pin)) {
del_timer_sync(&lp->check_timer);
return;
}
......@@ -366,6 +365,7 @@ static void disable_phyirq(struct net_device *dev)
disable_mdi();
spin_unlock_irq(&lp->lock);
irq_number = lp->board_data.phy_irq_pin;
free_irq(irq_number, dev); /* Free interrupt handler */
}
......@@ -1078,7 +1078,7 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add
netif_carrier_off(dev); /* will be enabled in open() */
/* If board has no PHY IRQ, use a timer to poll the PHY */
if (!lp->board_data.phy_irq_pin) {
if (!gpio_is_valid(lp->board_data.phy_irq_pin)) {
init_timer(&lp->check_timer);
lp->check_timer.data = (unsigned long)dev;
lp->check_timer.function = at91ether_check_link;
......@@ -1170,7 +1170,8 @@ static int __devexit at91ether_remove(struct platform_device *pdev)
struct net_device *dev = platform_get_drvdata(pdev);
struct at91_private *lp = netdev_priv(dev);
if (lp->board_data.phy_irq_pin >= 32)
if (gpio_is_valid(lp->board_data.phy_irq_pin) &&
lp->board_data.phy_irq_pin >= 32)
gpio_free(lp->board_data.phy_irq_pin);
unregister_netdev(dev);
......@@ -1189,11 +1190,12 @@ static int at91ether_suspend(struct platform_device *pdev, pm_message_t mesg)
{
struct net_device *net_dev = platform_get_drvdata(pdev);
struct at91_private *lp = netdev_priv(net_dev);
int phy_irq = lp->board_data.phy_irq_pin;
if (netif_running(net_dev)) {
if (phy_irq)
if (gpio_is_valid(lp->board_data.phy_irq_pin)) {
int phy_irq = lp->board_data.phy_irq_pin;
disable_irq(phy_irq);
}
netif_stop_queue(net_dev);
netif_device_detach(net_dev);
......@@ -1207,7 +1209,6 @@ static int at91ether_resume(struct platform_device *pdev)
{
struct net_device *net_dev = platform_get_drvdata(pdev);
struct at91_private *lp = netdev_priv(net_dev);
int phy_irq = lp->board_data.phy_irq_pin;
if (netif_running(net_dev)) {
clk_enable(lp->ether_clk);
......@@ -1215,9 +1216,11 @@ static int at91ether_resume(struct platform_device *pdev)
netif_device_attach(net_dev);
netif_start_queue(net_dev);
if (phy_irq)
if (gpio_is_valid(lp->board_data.phy_irq_pin)) {
int phy_irq = lp->board_data.phy_irq_pin;
enable_irq(phy_irq);
}
}
return 0;
}
......
......@@ -23,6 +23,8 @@
#include <linux/platform_data/macb.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
#include <linux/of_device.h>
#include <linux/of_net.h>
#include "macb.h"
......@@ -191,7 +193,6 @@ static int macb_mii_probe(struct net_device *dev)
{
struct macb *bp = netdev_priv(dev);
struct phy_device *phydev;
struct macb_platform_data *pdata;
int ret;
phydev = phy_find_first(bp->mii_bus);
......@@ -200,14 +201,11 @@ static int macb_mii_probe(struct net_device *dev)
return -1;
}
pdata = bp->pdev->dev.platform_data;
/* TODO : add pin_irq */
/* attach the mac to the phy */
ret = phy_connect_direct(dev, phydev, &macb_handle_link_change, 0,
pdata && pdata->is_rmii ?
PHY_INTERFACE_MODE_RMII :
PHY_INTERFACE_MODE_MII);
bp->phy_interface);
if (ret) {
netdev_err(dev, "Could not attach to PHY\n");
return ret;
......@@ -1244,6 +1242,52 @@ static const struct net_device_ops macb_netdev_ops = {
#endif
};
#if defined(CONFIG_OF)
static const struct of_device_id macb_dt_ids[] = {
{ .compatible = "cdns,at32ap7000-macb" },
{ .compatible = "cdns,at91sam9260-macb" },
{ .compatible = "cdns,macb" },
{ .compatible = "cdns,pc302-gem" },
{ .compatible = "cdns,gem" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, macb_dt_ids);
static int __devinit macb_get_phy_mode_dt(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
if (np)
return of_get_phy_mode(np);
return -ENODEV;
}
static int __devinit macb_get_hwaddr_dt(struct macb *bp)
{
struct device_node *np = bp->pdev->dev.of_node;
if (np) {
const char *mac = of_get_mac_address(np);
if (mac) {
memcpy(bp->dev->dev_addr, mac, ETH_ALEN);
return 0;
}
}
return -ENODEV;
}
#else
static int __devinit macb_get_phy_mode_dt(struct platform_device *pdev)
{
return -ENODEV;
}
static int __devinit macb_get_hwaddr_dt(struct macb *bp)
{
return -ENODEV;
}
#endif
static int __init macb_probe(struct platform_device *pdev)
{
struct macb_platform_data *pdata;
......@@ -1318,10 +1362,22 @@ static int __init macb_probe(struct platform_device *pdev)
config |= macb_dbw(bp);
macb_writel(bp, NCFGR, config);
err = macb_get_hwaddr_dt(bp);
if (err < 0)
macb_get_hwaddr(bp);
pdata = pdev->dev.platform_data;
err = macb_get_phy_mode_dt(pdev);
if (err < 0) {
pdata = pdev->dev.platform_data;
if (pdata && pdata->is_rmii)
bp->phy_interface = PHY_INTERFACE_MODE_RMII;
else
bp->phy_interface = PHY_INTERFACE_MODE_MII;
} else {
bp->phy_interface = err;
}
if (bp->phy_interface == PHY_INTERFACE_MODE_RMII)
#if defined(CONFIG_ARCH_AT91)
macb_or_gem_writel(bp, USRIO, (MACB_BIT(RMII) |
MACB_BIT(CLKEN)));
......@@ -1444,6 +1500,7 @@ static struct platform_driver macb_driver = {
.driver = {
.name = "macb",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(macb_dt_ids),
},
};
......
......@@ -532,6 +532,8 @@ struct macb {
unsigned int link;
unsigned int speed;
unsigned int duplex;
phy_interface_t phy_interface;
};
static inline bool macb_is_gem(struct macb *bp)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment