Commit 0701e49d authored by subhashj@codeaurora.org's avatar subhashj@codeaurora.org Committed by Martin K. Petersen

scsi: ufs: kick start clock scaling only after device detection

UFS clock scaling might start kicking in even before the device
is running at the fastest interface speed which is undesirable.
This change moves the clock scaling kick start only after the
device is detected and running at the fastest interface speed.
Signed-off-by: default avatarSubhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 401f1e44
......@@ -6330,19 +6330,31 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
if (ufshcd_scsi_add_wlus(hba))
goto out;
scsi_scan_host(hba->host);
pm_runtime_put_sync(hba->dev);
}
/* Resume devfreq after UFS device is detected */
/* Initialize devfreq after UFS device is detected */
if (ufshcd_is_clkscaling_supported(hba)) {
memcpy(&hba->clk_scaling.saved_pwr_info.info, &hba->pwr_info,
memcpy(&hba->clk_scaling.saved_pwr_info.info,
&hba->pwr_info,
sizeof(struct ufs_pa_layer_attr));
hba->clk_scaling.saved_pwr_info.is_valid = true;
ufshcd_resume_clkscaling(hba);
if (!hba->devfreq) {
hba->devfreq = devm_devfreq_add_device(hba->dev,
&ufs_devfreq_profile,
"simple_ondemand",
NULL);
if (IS_ERR(hba->devfreq)) {
ret = PTR_ERR(hba->devfreq);
dev_err(hba->dev, "Unable to register with devfreq %d\n",
ret);
goto out;
}
}
hba->clk_scaling.is_allowed = true;
}
scsi_scan_host(hba->host);
pm_runtime_put_sync(hba->dev);
}
if (!hba->is_init_prefetch)
hba->is_init_prefetch = true;
......@@ -6865,6 +6877,7 @@ static void ufshcd_hba_exit(struct ufs_hba *hba)
ufshcd_setup_vreg(hba, false);
ufshcd_suspend_clkscaling(hba);
if (ufshcd_is_clkscaling_supported(hba)) {
if (hba->devfreq)
ufshcd_suspend_clkscaling(hba);
destroy_workqueue(hba->clk_scaling.workq);
}
......@@ -7859,16 +7872,6 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
if (ufshcd_is_clkscaling_supported(hba)) {
char wq_name[sizeof("ufs_clkscaling_00")];
hba->devfreq = devm_devfreq_add_device(dev, &ufs_devfreq_profile,
"simple_ondemand", NULL);
if (IS_ERR(hba->devfreq)) {
dev_err(hba->dev, "Unable to register with devfreq %ld\n",
PTR_ERR(hba->devfreq));
err = PTR_ERR(hba->devfreq);
goto out_remove_scsi_host;
}
hba->clk_scaling.is_suspended = false;
INIT_WORK(&hba->clk_scaling.suspend_work,
ufshcd_clk_scaling_suspend_work);
INIT_WORK(&hba->clk_scaling.resume_work,
......@@ -7878,8 +7881,6 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
host->host_no);
hba->clk_scaling.workq = create_singlethread_workqueue(wq_name);
/* Suspend devfreq until the UFS device is detected */
ufshcd_suspend_clkscaling(hba);
ufshcd_clkscaling_init_sysfs(hba);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment