Commit 07830d9a authored by Mario Kicherer's avatar Mario Kicherer Committed by Guenter Roeck

hwmon: add initial NXP MC34VR500 PMIC monitoring support

Add initial monitoring support for the MC34VR500 PMIC. In its current
state, input voltage and temperature alarms are reported to hwmon.

Datasheet:
 - https://www.nxp.com/docs/en/data-sheet/MC34VR500.pdfSigned-off-by: default avatarMario Kicherer <dev@kicherer.org>
Link: https://lore.kernel.org/r/20230118123019.3041303-4-dev@kicherer.org
[groeck: Silence stray compiler warning, terminate struct of_device_id]
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
parent a66c9147
...@@ -1175,6 +1175,13 @@ config SENSORS_MAX31790 ...@@ -1175,6 +1175,13 @@ config SENSORS_MAX31790
This driver can also be built as a module. If so, the module This driver can also be built as a module. If so, the module
will be called max31790. will be called max31790.
config SENSORS_MC34VR500
tristate "NXP MC34VR500 hardware monitoring driver"
depends on I2C
help
If you say yes here you get support for the temperature and input
voltage sensors of the NXP MC34VR500.
config SENSORS_MCP3021 config SENSORS_MCP3021
tristate "Microchip MCP3021 and compatibles" tristate "Microchip MCP3021 and compatibles"
depends on I2C depends on I2C
......
...@@ -150,6 +150,7 @@ obj-$(CONFIG_SENSORS_MAX6650) += max6650.o ...@@ -150,6 +150,7 @@ obj-$(CONFIG_SENSORS_MAX6650) += max6650.o
obj-$(CONFIG_SENSORS_MAX6697) += max6697.o obj-$(CONFIG_SENSORS_MAX6697) += max6697.o
obj-$(CONFIG_SENSORS_MAX31790) += max31790.o obj-$(CONFIG_SENSORS_MAX31790) += max31790.o
obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
obj-$(CONFIG_SENSORS_MC34VR500) += mc34vr500.o
obj-$(CONFIG_SENSORS_MCP3021) += mcp3021.o obj-$(CONFIG_SENSORS_MCP3021) += mcp3021.o
obj-$(CONFIG_SENSORS_TC654) += tc654.o obj-$(CONFIG_SENSORS_TC654) += tc654.o
obj-$(CONFIG_SENSORS_TPS23861) += tps23861.o obj-$(CONFIG_SENSORS_TPS23861) += tps23861.o
......
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* An hwmon driver for the NXP MC34VR500 PMIC
*
* Author: Mario Kicherer <dev@kicherer.org>
*/
#include <linux/bits.h>
#include <linux/dev_printk.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/hwmon.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/irqreturn.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regmap.h>
#define MC34VR500_I2C_ADDR 0x08
#define MC34VR500_DEVICEID_VALUE 0x14
/* INTSENSE0 */
#define ENS_BIT BIT(0)
#define LOWVINS_BIT BIT(1)
#define THERM110S_BIT BIT(2)
#define THERM120S_BIT BIT(3)
#define THERM125S_BIT BIT(4)
#define THERM130S_BIT BIT(5)
#define MC34VR500_DEVICEID 0x00
#define MC34VR500_SILICONREVID 0x03
#define MC34VR500_FABID 0x04
#define MC34VR500_INTSTAT0 0x05
#define MC34VR500_INTMASK0 0x06
#define MC34VR500_INTSENSE0 0x07
struct mc34vr500_data {
struct device *hwmon_dev;
struct regmap *regmap;
};
static irqreturn_t mc34vr500_process_interrupt(int irq, void *userdata)
{
struct mc34vr500_data *data = (struct mc34vr500_data *)userdata;
unsigned int reg;
int ret;
ret = regmap_read(data->regmap, MC34VR500_INTSTAT0, &reg);
if (ret < 0)
return IRQ_HANDLED;
if (reg) {
if (reg & LOWVINS_BIT)
hwmon_notify_event(data->hwmon_dev, hwmon_in,
hwmon_in_min_alarm, 0);
if (reg & THERM110S_BIT)
hwmon_notify_event(data->hwmon_dev, hwmon_temp,
hwmon_temp_max_alarm, 0);
if (reg & THERM120S_BIT)
hwmon_notify_event(data->hwmon_dev, hwmon_temp,
hwmon_temp_crit_alarm, 0);
if (reg & THERM130S_BIT)
hwmon_notify_event(data->hwmon_dev, hwmon_temp,
hwmon_temp_emergency_alarm, 0);
/* write 1 to clear */
regmap_write(data->regmap, MC34VR500_INTSTAT0, LOWVINS_BIT |
THERM110S_BIT | THERM120S_BIT | THERM130S_BIT);
}
return IRQ_HANDLED;
}
static umode_t mc34vr500_is_visible(const void *data,
enum hwmon_sensor_types type,
u32 attr, int channel)
{
switch (attr) {
case hwmon_in_min_alarm:
case hwmon_temp_max_alarm:
case hwmon_temp_crit_alarm:
case hwmon_temp_emergency_alarm:
return 0444;
default:
break;
}
return 0;
}
static int mc34vr500_alarm_read(struct mc34vr500_data *data, int index,
long *val)
{
unsigned int reg;
int ret;
ret = regmap_read(data->regmap, MC34VR500_INTSENSE0, &reg);
if (ret < 0)
return ret;
*val = !!(reg & index);
return 0;
}
static int mc34vr500_read(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long *val)
{
struct mc34vr500_data *data = dev_get_drvdata(dev);
switch (type) {
case hwmon_in:
switch (attr) {
case hwmon_in_min_alarm:
return mc34vr500_alarm_read(data, LOWVINS_BIT, val);
default:
return -EOPNOTSUPP;
}
case hwmon_temp:
switch (attr) {
case hwmon_temp_max_alarm:
return mc34vr500_alarm_read(data, THERM110S_BIT, val);
case hwmon_temp_crit_alarm:
return mc34vr500_alarm_read(data, THERM120S_BIT, val);
case hwmon_temp_emergency_alarm:
return mc34vr500_alarm_read(data, THERM130S_BIT, val);
default:
return -EOPNOTSUPP;
}
default:
return -EOPNOTSUPP;
}
}
static const struct hwmon_channel_info *mc34vr500_info[] = {
HWMON_CHANNEL_INFO(in, HWMON_I_MIN_ALARM),
HWMON_CHANNEL_INFO(temp, HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM
| HWMON_T_EMERGENCY_ALARM),
NULL,
};
static const struct hwmon_ops mc34vr500_hwmon_ops = {
.is_visible = mc34vr500_is_visible,
.read = mc34vr500_read,
};
static const struct hwmon_chip_info mc34vr500_chip_info = {
.ops = &mc34vr500_hwmon_ops,
.info = mc34vr500_info,
};
static const struct regmap_config mc34vr500_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = MC34VR500_INTSENSE0,
};
static int mc34vr500_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct mc34vr500_data *data;
struct device *hwmon_dev;
int ret;
unsigned int reg, revid, fabid;
struct regmap *regmap;
regmap = devm_regmap_init_i2c(client, &mc34vr500_regmap_config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
data = devm_kzalloc(dev, sizeof(struct mc34vr500_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->regmap = regmap;
ret = regmap_read(regmap, MC34VR500_DEVICEID, &reg);
if (ret < 0)
return ret;
if (reg != MC34VR500_DEVICEID_VALUE)
return -ENODEV;
ret = regmap_read(regmap, MC34VR500_SILICONREVID, &revid);
if (ret < 0)
return ret;
ret = regmap_read(regmap, MC34VR500_FABID, &fabid);
if (ret < 0)
return ret;
dev_dbg(dev, "mc34vr500: revid 0x%x fabid 0x%x\n", revid, fabid);
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
data,
&mc34vr500_chip_info,
NULL);
if (IS_ERR(hwmon_dev))
return PTR_ERR(hwmon_dev);
data->hwmon_dev = hwmon_dev;
if (client->irq) {
ret = devm_request_threaded_irq(dev, client->irq, NULL,
mc34vr500_process_interrupt,
IRQF_TRIGGER_RISING |
IRQF_ONESHOT |
IRQF_SHARED,
dev_name(dev), data);
if (ret)
return ret;
/* write 1 to clear interrupts */
ret = regmap_write(regmap, MC34VR500_INTSTAT0, LOWVINS_BIT |
THERM110S_BIT | THERM120S_BIT |
THERM130S_BIT);
if (ret)
return ret;
/* unmask interrupts */
ret = regmap_write(regmap, MC34VR500_INTMASK0,
(unsigned int) ~(LOWVINS_BIT | THERM110S_BIT |
THERM120S_BIT | THERM130S_BIT));
if (ret)
return ret;
}
return 0;
}
static const struct i2c_device_id mc34vr500_id[] = {
{ "mc34vr500", 0 },
{ },
};
MODULE_DEVICE_TABLE(i2c, mc34vr500_id);
static const struct of_device_id __maybe_unused mc34vr500_of_match[] = {
{ .compatible = "nxp,mc34vr500" },
{ },
};
MODULE_DEVICE_TABLE(of, mc34vr500_of_match);
static struct i2c_driver mc34vr500_driver = {
.driver = {
.name = "mc34vr500",
.of_match_table = of_match_ptr(mc34vr500_of_match),
},
.probe_new = mc34vr500_probe,
.id_table = mc34vr500_id,
};
module_i2c_driver(mc34vr500_driver);
MODULE_AUTHOR("Mario Kicherer <dev@kicherer.org>");
MODULE_DESCRIPTION("MC34VR500 driver");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment