Commit 07d29954 authored by Lipeng's avatar Lipeng Committed by David S. Miller

net: hns3: add support for ETHTOOL_GRXFH

This patch add support for ethtool's ETHTOOL_GRXFH in hns3_get_rxnfc().
Signed-off-by: default avatarLipeng <lipeng321@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent f7db940a
...@@ -341,6 +341,8 @@ struct hnae3_ae_ops { ...@@ -341,6 +341,8 @@ struct hnae3_ae_ops {
const u8 *key, const u8 hfunc); const u8 *key, const u8 hfunc);
int (*set_rss_tuple)(struct hnae3_handle *handle, int (*set_rss_tuple)(struct hnae3_handle *handle,
struct ethtool_rxnfc *cmd); struct ethtool_rxnfc *cmd);
int (*get_rss_tuple)(struct hnae3_handle *handle,
struct ethtool_rxnfc *cmd);
int (*get_tc_size)(struct hnae3_handle *handle); int (*get_tc_size)(struct hnae3_handle *handle);
......
...@@ -2767,6 +2767,69 @@ static int hclge_set_rss_tuple(struct hnae3_handle *handle, ...@@ -2767,6 +2767,69 @@ static int hclge_set_rss_tuple(struct hnae3_handle *handle,
return ret; return ret;
} }
static int hclge_get_rss_tuple(struct hnae3_handle *handle,
struct ethtool_rxnfc *nfc)
{
struct hclge_vport *vport = hclge_get_vport(handle);
struct hclge_dev *hdev = vport->back;
struct hclge_rss_input_tuple_cmd *req;
struct hclge_desc desc;
u8 tuple_sets;
int ret;
nfc->data = 0;
req = (struct hclge_rss_input_tuple_cmd *)desc.data;
hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_RSS_INPUT_TUPLE, true);
ret = hclge_cmd_send(&hdev->hw, &desc, 1);
if (ret) {
dev_err(&hdev->pdev->dev,
"Read rss tuple fail, status = %d\n", ret);
return ret;
}
switch (nfc->flow_type) {
case TCP_V4_FLOW:
tuple_sets = req->ipv4_tcp_en;
break;
case UDP_V4_FLOW:
tuple_sets = req->ipv4_udp_en;
break;
case TCP_V6_FLOW:
tuple_sets = req->ipv6_tcp_en;
break;
case UDP_V6_FLOW:
tuple_sets = req->ipv6_udp_en;
break;
case SCTP_V4_FLOW:
tuple_sets = req->ipv4_sctp_en;
break;
case SCTP_V6_FLOW:
tuple_sets = req->ipv6_sctp_en;
break;
case IPV4_FLOW:
case IPV6_FLOW:
tuple_sets = HCLGE_S_IP_BIT | HCLGE_D_IP_BIT;
break;
default:
return -EINVAL;
}
if (!tuple_sets)
return 0;
if (tuple_sets & HCLGE_D_PORT_BIT)
nfc->data |= RXH_L4_B_2_3;
if (tuple_sets & HCLGE_S_PORT_BIT)
nfc->data |= RXH_L4_B_0_1;
if (tuple_sets & HCLGE_D_IP_BIT)
nfc->data |= RXH_IP_DST;
if (tuple_sets & HCLGE_S_IP_BIT)
nfc->data |= RXH_IP_SRC;
return 0;
}
static int hclge_get_tc_size(struct hnae3_handle *handle) static int hclge_get_tc_size(struct hnae3_handle *handle)
{ {
struct hclge_vport *vport = hclge_get_vport(handle); struct hclge_vport *vport = hclge_get_vport(handle);
...@@ -4435,6 +4498,7 @@ static const struct hnae3_ae_ops hclge_ops = { ...@@ -4435,6 +4498,7 @@ static const struct hnae3_ae_ops hclge_ops = {
.get_rss = hclge_get_rss, .get_rss = hclge_get_rss,
.set_rss = hclge_set_rss, .set_rss = hclge_set_rss,
.set_rss_tuple = hclge_set_rss_tuple, .set_rss_tuple = hclge_set_rss_tuple,
.get_rss_tuple = hclge_get_rss_tuple,
.get_tc_size = hclge_get_tc_size, .get_tc_size = hclge_get_tc_size,
.get_mac_addr = hclge_get_mac_addr, .get_mac_addr = hclge_get_mac_addr,
.set_mac_addr = hclge_set_mac_addr, .set_mac_addr = hclge_set_mac_addr,
......
...@@ -452,6 +452,8 @@ static int hns3_get_rxnfc(struct net_device *netdev, ...@@ -452,6 +452,8 @@ static int hns3_get_rxnfc(struct net_device *netdev,
case ETHTOOL_GRXRINGS: case ETHTOOL_GRXRINGS:
cmd->data = h->ae_algo->ops->get_tc_size(h); cmd->data = h->ae_algo->ops->get_tc_size(h);
break; break;
case ETHTOOL_GRXFH:
return h->ae_algo->ops->get_rss_tuple(h, cmd);
default: default:
return -EOPNOTSUPP; return -EOPNOTSUPP;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment