soc/fsl/qbman: Use shared-dma-pool for QMan private memory allocations

Use the shared-memory-pool mechanism for frame queue descriptor and
packed frame descriptor record area allocations.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

drivers/soc/fsl/qbman/qman_ccsr.c

@@ -401,21 +401,42 @@ static int qm_init_pfdr(struct device *dev, u32 pfdr_start, u32 num)
 }
 
 /*
- * Ideally we would use the DMA API to turn rmem->base into a DMA address
- * (especially if iommu translations ever get involved).  Unfortunately, the
- * DMA API currently does not allow mapping anything that is not backed with
- * a struct page.
+ * QMan needs two global memory areas initialized at boot time:
+ *  1) FQD: Frame Queue Descriptors used to manage frame queues
+ *  2) PFDR: Packed Frame Queue Descriptor Records used to store frames
+ * Both areas are reserved using the device tree reserved memory framework
+ * and the addresses and sizes are initialized when the QMan device is probed
  */
 static dma_addr_t fqd_a, pfdr_a;
 static size_t fqd_sz, pfdr_sz;
 
+#ifdef CONFIG_PPC
+/*
+ * Support for PPC Device Tree backward compatibility when compatible
+ * string is set to fsl-qman-fqd and fsl-qman-pfdr
+ */
+static int zero_priv_mem(phys_addr_t addr, size_t sz)
+{
+	/* map as cacheable, non-guarded */
+	void __iomem *tmpp = ioremap_prot(addr, sz, 0);
+
+	if (!tmpp)
+		return -ENOMEM;
+
+	memset_io(tmpp, 0, sz);
+	flush_dcache_range((unsigned long)tmpp,
+			   (unsigned long)tmpp + sz);
+	iounmap(tmpp);
+
+	return 0;
+}
+
 static int qman_fqd(struct reserved_mem *rmem)
 {
 	fqd_a = rmem->base;
 	fqd_sz = rmem->size;
 
 	WARN_ON(!(fqd_a && fqd_sz));
-
 	return 0;
 }
 RESERVEDMEM_OF_DECLARE(qman_fqd, "fsl,qman-fqd", qman_fqd);
@@ -431,32 +452,13 @@ static int qman_pfdr(struct reserved_mem *rmem)
 }
 RESERVEDMEM_OF_DECLARE(qman_pfdr, "fsl,qman-pfdr", qman_pfdr);
 
+#endif
+
 static unsigned int qm_get_fqid_maxcnt(void)
 {
 	return fqd_sz / 64;
 }
 
-/*
- * Flush this memory range from data cache so that QMAN originated
- * transactions for this memory region could be marked non-coherent.
- */
-static int zero_priv_mem(struct device *dev, struct device_node *node,
-			 phys_addr_t addr, size_t sz)
-{
-	/* map as cacheable, non-guarded */
-	void __iomem *tmpp = ioremap_prot(addr, sz, 0);
-
-	if (!tmpp)
-		return -ENOMEM;
-
-	memset_io(tmpp, 0, sz);
-	flush_dcache_range((unsigned long)tmpp,
-			   (unsigned long)tmpp + sz);
-	iounmap(tmpp);
-
-	return 0;
-}
-
 static void log_edata_bits(struct device *dev, u32 bit_count)
 {
 	u32 i, j, mask = 0xffffffff;
@@ -727,10 +729,41 @@ static int fsl_qman_probe(struct platform_device *pdev)
 		qm_channel_caam = QMAN_CHANNEL_CAAM_REV3;
 	}
 
-	ret = zero_priv_mem(dev, node, fqd_a, fqd_sz);
-	WARN_ON(ret);
-	if (ret)
+	if (fqd_a) {
+#ifdef CONFIG_PPC
+		/*
+		 * For PPC backward DT compatibility
+		 * FQD memory MUST be zero'd by software
+		 */
+		zero_priv_mem(fqd_a, fqd_sz);
+#else
+		WARN(1, "Unexpected architecture using non shared-dma-mem reservations");
+#endif
+	} else {
+		/*
+		 * Order of memory regions is assumed as FQD followed by PFDR
+		 * in order to ensure allocations from the correct regions the
+		 * driver initializes then allocates each piece in order
+		 */
+		ret = qbman_init_private_mem(dev, 0, &fqd_a, &fqd_sz);
+		if (ret) {
+			dev_err(dev, "qbman_init_private_mem() for FQD failed 0x%x\n",
+				ret);
+			return -ENODEV;
+		}
+	}
+	dev_dbg(dev, "Allocated FQD 0x%llx 0x%zx\n", fqd_a, fqd_sz);
+
+	if (!pfdr_a) {
+		/* Setup PFDR memory */
+		ret = qbman_init_private_mem(dev, 1, &pfdr_a, &pfdr_sz);
+		if (ret) {
+			dev_err(dev, "qbman_init_private_mem() for PFDR failed 0x%x\n",
+				ret);
 			return -ENODEV;
+		}
+	}
+	dev_dbg(dev, "Allocated PFDR 0x%llx 0x%zx\n", pfdr_a, pfdr_sz);
 
 	ret = qman_init_ccsr(dev);
 	if (ret) {

drivers/soc/fsl/qbman/qman_priv.h

@@ -28,8 +28,6 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
 #include "dpaa_sys.h"
 
 #include <soc/fsl/qman.h>

drivers/soc/fsl/qbman/qman_test.h

@@ -30,7 +30,5 @@
 
 #include "qman_priv.h"
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
 int qman_test_stash(void);
 int qman_test_api(void);