scsi: myrb: Add Mylex RAID controller (block interface)

This patch adds support for the Mylex DAC960 RAID controller,
supporting the older, block-based interface only.  The driver is a
re-implementation of the original DAC960 driver.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

MAINTAINERS

@@ -9892,6 +9892,12 @@ S:	Supported
 F:	drivers/gpu/drm/mxsfb/
 F:	Documentation/devicetree/bindings/display/mxsfb.txt
 
+MYLEX DAC960 PCI RAID Controller
+M:	Hannes Reinecke <hare@kernel.org>
+L:	linux-scsi@vger.kernel.org
+S:	Supported
+F:	drivers/scsi/myrb.*
+
 MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
 M:	Chris Lee <christopher.lee@cspi.com>
 L:	netdev@vger.kernel.org

drivers/scsi/Kconfig

@@ -557,6 +557,21 @@ config SCSI_FLASHPOINT
 	  substantial, so users of MultiMaster Host Adapters may not
 	  wish to include it.
 
+config SCSI_MYRB
+	tristate "Mylex DAC960/DAC1100 PCI RAID Controller (Block Interface)"
+	depends on PCI
+	select RAID_ATTRS
+	help
+	  This driver adds support for the Mylex DAC960, AcceleRAID, and
+	  eXtremeRAID PCI RAID controllers. This driver supports the
+	  older, block based interface.
+	  This driver is a reimplementation of the original DAC960
+	  driver. If you have used the DAC960 driver you should enable
+	  this module.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called myrb.
+
 config VMWARE_PVSCSI
 	tristate "VMware PVSCSI driver support"
 	depends on PCI && SCSI && X86

drivers/scsi/Makefile

@@ -106,6 +106,7 @@ obj-$(CONFIG_SCSI_INIA100)	+= a100u2w.o
 obj-$(CONFIG_SCSI_QLOGICPTI)	+= qlogicpti.o
 obj-$(CONFIG_SCSI_MESH)		+= mesh.o
 obj-$(CONFIG_SCSI_MAC53C94)	+= mac53c94.o
+obj-$(CONFIG_SCSI_MYRB)		+= myrb.o
 obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o
 obj-$(CONFIG_SCSI_3W_9XXX)	+= 3w-9xxx.o
 obj-$(CONFIG_SCSI_3W_SAS)	+= 3w-sas.o