Commit 08641c7c authored by Shawn Guo's avatar Shawn Guo Committed by Mark Brown

ASoC: mxs: add device tree support for mxs-saif

Add device tree probe for mxs-saif driver.
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 4da3fe78
* Freescale MXS Serial Audio Interface (SAIF)
Required properties:
- compatible: Should be "fsl,<chip>-saif"
- reg: Should contain registers location and length
- interrupts: Should contain ERROR and DMA interrupts
- fsl,saif-dma-channel: APBX DMA channel for the SAIF
Optional properties:
- fsl,saif-master: phandle to the master SAIF. It's only required for
the slave SAIF.
Note: Each SAIF controller should have an alias correctly numbered
in "aliases" node.
Example:
aliases {
saif0 = &saif0;
saif1 = &saif1;
};
saif0: saif@80042000 {
compatible = "fsl,imx28-saif";
reg = <0x80042000 2000>;
interrupts = <59 80>;
fsl,saif-dma-channel = <4>;
};
saif1: saif@80046000 {
compatible = "fsl,imx28-saif";
reg = <0x80046000 2000>;
interrupts = <58 81>;
fsl,saif-dma-channel = <5>;
fsl,saif-master = <&saif0>;
};
......@@ -18,6 +18,8 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
......@@ -622,33 +624,53 @@ static irqreturn_t mxs_saif_irq(int irq, void *dev_id)
static int __devinit mxs_saif_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct resource *iores, *dmares;
struct mxs_saif *saif;
struct mxs_saif_platform_data *pdata;
int ret = 0;
if (pdev->id >= ARRAY_SIZE(mxs_saif))
if (!np && pdev->id >= ARRAY_SIZE(mxs_saif))
return -EINVAL;
saif = devm_kzalloc(&pdev->dev, sizeof(*saif), GFP_KERNEL);
if (!saif)
return -ENOMEM;
mxs_saif[pdev->id] = saif;
if (np) {
struct device_node *master;
saif->id = of_alias_get_id(np, "saif");
if (saif->id < 0)
return saif->id;
/*
* If there is no "fsl,saif-master" phandle, it's a saif
* master. Otherwise, it's a slave and its phandle points
* to the master.
*/
master = of_parse_phandle(np, "fsl,saif-master", 0);
if (!master) {
saif->master_id = saif->id;
} else {
saif->master_id = of_alias_get_id(master, "saif");
if (saif->master_id < 0)
return saif->master_id;
}
} else {
saif->id = pdev->id;
pdata = pdev->dev.platform_data;
if (pdata && !pdata->master_mode) {
if (pdata && !pdata->master_mode)
saif->master_id = pdata->master_id;
if (saif->master_id < 0 ||
saif->master_id >= ARRAY_SIZE(mxs_saif) ||
saif->master_id == saif->id) {
else
saif->master_id = saif->id;
}
if (saif->master_id < 0 || saif->master_id >= ARRAY_SIZE(mxs_saif)) {
dev_err(&pdev->dev, "get wrong master id\n");
return -EINVAL;
}
} else {
saif->master_id = saif->id;
}
mxs_saif[saif->id] = saif;
saif->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(saif->clk)) {
......@@ -669,12 +691,19 @@ static int __devinit mxs_saif_probe(struct platform_device *pdev)
dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
if (!dmares) {
ret = -ENODEV;
dev_err(&pdev->dev, "failed to get dma resource: %d\n",
ret);
/*
* TODO: This is a temporary solution and should be changed
* to use generic DMA binding later when the helplers get in.
*/
ret = of_property_read_u32(np, "fsl,saif-dma-channel",
&saif->dma_param.chan_num);
if (ret) {
dev_err(&pdev->dev, "failed to get dma channel\n");
goto failed_get_resource;
}
} else {
saif->dma_param.chan_num = dmares->start;
}
saif->irq = platform_get_irq(pdev, 0);
if (saif->irq < 0) {
......@@ -735,6 +764,12 @@ static int __devexit mxs_saif_remove(struct platform_device *pdev)
return 0;
}
static const struct of_device_id mxs_saif_dt_ids[] = {
{ .compatible = "fsl,imx28-saif", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mxs_saif_dt_ids);
static struct platform_driver mxs_saif_driver = {
.probe = mxs_saif_probe,
.remove = __devexit_p(mxs_saif_remove),
......@@ -742,6 +777,7 @@ static struct platform_driver mxs_saif_driver = {
.driver = {
.name = "mxs-saif",
.owner = THIS_MODULE,
.of_match_table = mxs_saif_dt_ids,
},
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment