Commit 08b8940e authored by Tom Lendacky's avatar Tom Lendacky Committed by Olof Johansson

dtb: amd: Add AMD XGBE device tree file

Add AMD XGBE device tree file, which is available in AMD Seattle RevB.
Signed-off-by: default avatarTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parent 71edbebb
......@@ -685,6 +685,7 @@ M: Tom Lendacky <thomas.lendacky@amd.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/amd/xgbe/
F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
AMS (Apple Motion Sensor) DRIVER
M: Michael Hanselmann <linux-kernel@hansmi.ch>
......
/*
* DTS file for AMD Seattle XGBE (RevB)
*
* Copyright (C) 2015 Advanced Micro Devices, Inc.
*/
xgmacclk0_dma_250mhz: clk250mhz_0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <250000000>;
clock-output-names = "xgmacclk0_dma_250mhz";
};
xgmacclk0_ptp_250mhz: clk250mhz_1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <250000000>;
clock-output-names = "xgmacclk0_ptp_250mhz";
};
xgmacclk1_dma_250mhz: clk250mhz_2 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <250000000>;
clock-output-names = "xgmacclk1_dma_250mhz";
};
xgmacclk1_ptp_250mhz: clk250mhz_3 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <250000000>;
clock-output-names = "xgmacclk1_ptp_250mhz";
};
xgmac0: xgmac@e0700000 {
compatible = "amd,xgbe-seattle-v1a";
reg = <0 0xe0700000 0 0x80000>,
<0 0xe0780000 0 0x80000>,
<0 0xe1240800 0 0x00400>, /* SERDES RX/TX0 */
<0 0xe1250000 0 0x00060>, /* SERDES IR 1/2 */
<0 0xe12500f8 0 0x00004>; /* SERDES IR 2/2 */
interrupts = <0 325 4>,
<0 346 1>, <0 347 1>, <0 348 1>, <0 349 1>,
<0 323 4>;
amd,per-channel-interrupt;
amd,speed-set = <0>;
amd,serdes-blwc = <1>, <1>, <0>;
amd,serdes-cdr-rate = <2>, <2>, <7>;
amd,serdes-pq-skew = <10>, <10>, <18>;
amd,serdes-tx-amp = <0>, <0>, <0>;
amd,serdes-dfe-tap-config = <3>, <3>, <3>;
amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
mac-address = [ 02 A1 A2 A3 A4 A5 ];
clocks = <&xgmacclk0_dma_250mhz>, <&xgmacclk0_ptp_250mhz>;
clock-names = "dma_clk", "ptp_clk";
phy-mode = "xgmii";
#stream-id-cells = <16>;
dma-coherent;
};
xgmac1: xgmac@e0900000 {
compatible = "amd,xgbe-seattle-v1a";
reg = <0 0xe0900000 0 0x80000>,
<0 0xe0980000 0 0x80000>,
<0 0xe1240c00 0 0x00400>, /* SERDES RX/TX1 */
<0 0xe1250080 0 0x00060>, /* SERDES IR 1/2 */
<0 0xe12500fc 0 0x00004>; /* SERDES IR 2/2 */
interrupts = <0 324 4>,
<0 341 1>, <0 342 1>, <0 343 1>, <0 344 1>,
<0 322 4>;
amd,per-channel-interrupt;
amd,speed-set = <0>;
amd,serdes-blwc = <1>, <1>, <0>;
amd,serdes-cdr-rate = <2>, <2>, <7>;
amd,serdes-pq-skew = <10>, <10>, <18>;
amd,serdes-tx-amp = <0>, <0>, <0>;
amd,serdes-dfe-tap-config = <3>, <3>, <3>;
amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
mac-address = [ 02 B1 B2 B3 B4 B5 ];
clocks = <&xgmacclk1_dma_250mhz>, <&xgmacclk1_ptp_250mhz>;
clock-names = "dma_clk", "ptp_clk";
phy-mode = "xgmii";
#stream-id-cells = <16>;
dma-coherent;
};
xgmac0_smmu: smmu@e0600000 {
compatible = "arm,mmu-401";
reg = <0 0xe0600000 0 0x10000>;
#global-interrupts = <1>;
interrupts = /* Uses combined intr for both
* global and context
*/
<0 336 4>,
<0 336 4>;
mmu-masters = <&xgmac0
0 1 2 3 4 5 6 7
16 17 18 19 20 21 22 23
>;
};
xgmac1_smmu: smmu@e0800000 {
compatible = "arm,mmu-401";
reg = <0 0xe0800000 0 0x10000>;
#global-interrupts = <1>;
interrupts = /* Uses combined intr for both
* global and context
*/
<0 335 4>,
<0 335 4>;
mmu-masters = <&xgmac1
0 1 2 3 4 5 6 7
16 17 18 19 20 21 22 23
>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment