Commit 092183df authored by John Crispin's avatar John Crispin Committed by David S. Miller

net-next: dsa: make the set_addr() operation optional

Only 1 of the 3 drivers currently has a set_addr() operation. Make the
set_addr() callback optional to reduce the amount of empty stubs inside
the drivers.
Signed-off-by: default avatarJohn Crispin <john@phrozen.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 06f8ec90
......@@ -378,9 +378,11 @@ static int dsa_switch_setup_one(struct dsa_switch *ds, struct device *parent)
if (ret < 0)
goto out;
if (ops->set_addr) {
ret = ops->set_addr(ds, dst->master_netdev->dev_addr);
if (ret < 0)
goto out;
}
if (!ds->slave_mii_bus && ops->phy_read) {
ds->slave_mii_bus = devm_mdiobus_alloc(parent);
......
......@@ -304,9 +304,11 @@ static int dsa_ds_apply(struct dsa_switch_tree *dst, struct dsa_switch *ds)
if (err < 0)
return err;
if (ds->ops->set_addr) {
err = ds->ops->set_addr(ds, dst->master_netdev->dev_addr);
if (err < 0)
return err;
}
if (!ds->slave_mii_bus && ds->ops->phy_read) {
ds->slave_mii_bus = devm_mdiobus_alloc(ds->dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment