Merge branch 'omap-fixes-for-linus' of...

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap4: Fix UART4 platform data on omap4
  omap4: Allow omap_serial_early_init() for OMAP4430 board
  omap3: PM: enable UART3 module wakeups
  omap2: Fix console serial port number for n8x0
  omap2: Fix detection of n8x0
  omap1: Fix DSP public peripherals support for ams-delta
  omap1: Fix redundant UARTs pin muxing that can break other hardware support
  omap: iommu: fix wrong condition check for SUPERSECTION
  omap: SDMA: Fix omap_stop_dma() API for channel linking
  omap: Fix omap-keypad by restoring old keypad.h without breaking omap2 boards that use matrix_keypad

arch/arm/configs/n8x0_defconfig

@@ -304,7 +304,7 @@ CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ZBOOT_ROM_TEXT=0x10C08000
 CONFIG_ZBOOT_ROM_BSS=0x10200000
 # CONFIG_ZBOOT_ROM is not set
-CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8"
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 

arch/arm/mach-omap1/board-ams-delta.c

@@ -219,6 +219,10 @@ static struct platform_device *ams_delta_devices[] __initdata = {
 
 static void __init ams_delta_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+
 	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
 
 	omap_board_config = ams_delta_config;
@@ -231,6 +235,8 @@ static void __init ams_delta_init(void)
 
 	omap_usb_init(&ams_delta_usb_config);
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
+
+	omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
 }
 
 static struct plat_serial8250_port ams_delta_modem_ports[] = {

arch/arm/mach-omap1/board-generic.c

@@ -64,6 +64,14 @@ static void __init omap_generic_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx()) {
+		/* mux pins for uarts */
+		omap_cfg_reg(UART1_TX);
+		omap_cfg_reg(UART1_RTS);
+		omap_cfg_reg(UART2_TX);
+		omap_cfg_reg(UART2_RTS);
+		omap_cfg_reg(UART3_TX);
+		omap_cfg_reg(UART3_RX);
+
 		omap_usb_init(&generic1510_usb_config);
 	}
 #endif

arch/arm/mach-omap1/board-innovator.c

@@ -376,6 +376,26 @@ static void __init innovator_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
+		unsigned char reg;
+
+		/* mux pins for uarts */
+		omap_cfg_reg(UART1_TX);
+		omap_cfg_reg(UART1_RTS);
+		omap_cfg_reg(UART2_TX);
+		omap_cfg_reg(UART2_RTS);
+		omap_cfg_reg(UART3_TX);
+		omap_cfg_reg(UART3_RX);
+
+		reg = fpga_read(OMAP1510_FPGA_POWER);
+		reg |= OMAP1510_FPGA_PCR_COM1_EN;
+		fpga_write(reg, OMAP1510_FPGA_POWER);
+		udelay(10);
+
+		reg = fpga_read(OMAP1510_FPGA_POWER);
+		reg |= OMAP1510_FPGA_PCR_COM2_EN;
+		fpga_write(reg, OMAP1510_FPGA_POWER);
+		udelay(10);
+
 		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
 		spi_register_board_info(innovator1510_boardinfo,
 				ARRAY_SIZE(innovator1510_boardinfo));

arch/arm/mach-omap1/board-palmte.c

@@ -342,6 +342,14 @@ static void __init palmte_misc_gpio_setup(void)
 
 static void __init omap_palmte_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	omap_board_config = palmte_config;
 	omap_board_config_size = ARRAY_SIZE(palmte_config);
 

arch/arm/mach-omap1/board-palmtt.c

@@ -289,6 +289,14 @@ static void __init omap_mpu_wdt_mode(int mode) {
 
 static void __init omap_palmtt_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	omap_mpu_wdt_mode(0);
 
 	omap_board_config = palmtt_config;

arch/arm/mach-omap1/board-palmz71.c

@@ -307,6 +307,14 @@ palmz71_gpio_setup(int early)
 static void __init
 omap_palmz71_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	palmz71_gpio_setup(1);
 	omap_mpu_wdt_mode(0);
 

arch/arm/mach-omap1/board-sx1.c

@@ -377,6 +377,14 @@ static struct omap_board_config_kernel sx1_config[] __initdata = {
 
 static void __init omap_sx1_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));
 
 	omap_board_config = sx1_config;

arch/arm/mach-omap1/board-voiceblue.c

@@ -152,6 +152,14 @@ static void __init voiceblue_init_irq(void)
 
 static void __init voiceblue_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	/* Watchdog */
 	gpio_request(0, "Watchdog");
 	/* smc91x reset */

arch/arm/mach-omap1/serial.c

@@ -131,8 +131,6 @@ void __init omap_serial_init(void)
 	}
 
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-		unsigned char reg;
-
 		switch (i) {
 		case 0:
 			uart1_ck = clk_get(NULL, "uart1_ck");
@@ -143,16 +141,6 @@ void __init omap_serial_init(void)
 				if (cpu_is_omap15xx())
 					clk_set_rate(uart1_ck, 12000000);
 			}
-			if (cpu_is_omap15xx()) {
-				omap_cfg_reg(UART1_TX);
-				omap_cfg_reg(UART1_RTS);
-				if (machine_is_omap_innovator()) {
-					reg = fpga_read(OMAP1510_FPGA_POWER);
-					reg |= OMAP1510_FPGA_PCR_COM1_EN;
-					fpga_write(reg, OMAP1510_FPGA_POWER);
-					udelay(10);
-				}
-			}
 			break;
 		case 1:
 			uart2_ck = clk_get(NULL, "uart2_ck");
@@ -165,16 +153,6 @@ void __init omap_serial_init(void)
 				else
 					clk_set_rate(uart2_ck, 48000000);
 			}
-			if (cpu_is_omap15xx()) {
-				omap_cfg_reg(UART2_TX);
-				omap_cfg_reg(UART2_RTS);
-				if (machine_is_omap_innovator()) {
-					reg = fpga_read(OMAP1510_FPGA_POWER);
-					reg |= OMAP1510_FPGA_PCR_COM2_EN;
-					fpga_write(reg, OMAP1510_FPGA_POWER);
-					udelay(10);
-				}
-			}
 			break;
 		case 2:
 			uart3_ck = clk_get(NULL, "uart3_ck");
@@ -185,10 +163,6 @@ void __init omap_serial_init(void)
 				if (cpu_is_omap15xx())
 					clk_set_rate(uart3_ck, 12000000);
 			}
-			if (cpu_is_omap15xx()) {
-				omap_cfg_reg(UART3_TX);
-				omap_cfg_reg(UART3_RX);
-			}
 			break;
 		}
 		omap_serial_reset(&serial_platform_data[i]);

arch/arm/mach-omap2/Kconfig

@@ -73,9 +73,21 @@ config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_NOKIA_N800
+       bool
+
+config MACH_NOKIA_N810
+       bool
+
+config MACH_NOKIA_N810_WIMAX
+       bool
+
 config MACH_NOKIA_N8X0
 	bool "Nokia N800/N810"
 	depends on ARCH_OMAP2420
+	select MACH_NOKIA_N800
+	select MACH_NOKIA_N810
+	select MACH_NOKIA_N810_WIMAX
 
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"

arch/arm/mach-omap2/board-3430sdp.c

@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl4030.h>
@@ -38,7 +39,6 @@
 #include <mach/gpmc.h>
 
 #include <mach/control.h>
-#include <mach/keypad.h>
 #include <mach/gpmc-smc91x.h>
 
 #include "sdram-qimonda-hyb18m512160af-6.h"

arch/arm/mach-omap2/board-4430sdp.c

@@ -58,6 +58,8 @@ static void __init gic_init_irq(void)
 
 static void __init omap_4430sdp_init_irq(void)
 {
+	omap_board_config = sdp4430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
 	omap2_init_common_hw(NULL, NULL);
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(1);
@@ -70,8 +72,6 @@ static void __init omap_4430sdp_init_irq(void)
 static void __init omap_4430sdp_init(void)
 {
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
-	omap_board_config = sdp4430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
 	omap_serial_init();
 }
 

arch/arm/mach-omap2/board-ldp.c

@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/gpio_keys.h>
 #include <linux/workqueue.h>
 #include <linux/err.h>
@@ -41,7 +42,6 @@
 #include <asm/delay.h>
 #include <mach/control.h>
 #include <mach/usb.h>
-#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
 

arch/arm/mach-omap2/board-omap3evm.c

@@ -20,6 +20,7 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/leds.h>
 
 #include <linux/spi/spi.h>
@@ -37,7 +38,6 @@
 #include <mach/usb.h>
 #include <mach/common.h>
 #include <mach/mcspi.h>
-#include <mach/keypad.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"

arch/arm/mach-omap2/board-omap3pandora.c

@@ -27,6 +27,7 @@
 #include <linux/i2c/twl4030.h>
 #include <linux/leds.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/gpio_keys.h>
 
 #include <asm/mach-types.h>
@@ -39,7 +40,6 @@
 #include <mach/hardware.h>
 #include <mach/mcspi.h>
 #include <mach/usb.h>
-#include <mach/keypad.h>
 #include <mach/mux.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c.h>
 #include <linux/i2c/twl4030.h>
@@ -27,7 +28,6 @@
 #include <mach/common.h>
 #include <mach/dma.h>
 #include <mach/gpmc.h>
-#include <mach/keypad.h>
 #include <mach/onenand.h>
 #include <mach/gpmc-smc91x.h>
 

arch/arm/mach-omap2/board-rx51.c

@@ -26,7 +26,6 @@
 #include <mach/mux.h>
 #include <mach/board.h>
 #include <mach/common.h>
-#include <mach/keypad.h>
 #include <mach/dma.h>
 #include <mach/gpmc.h>
 #include <mach/usb.h>

arch/arm/mach-omap2/board-zoom2.c

@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/gpio.h>
 #include <linux/i2c/twl4030.h>
 #include <linux/regulator/machine.h>
@@ -22,7 +23,6 @@
 
 #include <mach/common.h>
 #include <mach/usb.h>
-#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
 #include "sdram-micron-mt46h32m32lf-6.h"

arch/arm/mach-omap2/io.c

@@ -302,7 +302,9 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
+#endif
 	omap_serial_early_init();
+#ifndef CONFIG_ARCH_OMAP4
 	omap_hwmod_late_init();
 	omap_pm_if_init();
 	omap2_sdrc_init(sdrc_cs0, sdrc_cs1);

arch/arm/mach-omap2/pm34xx.c

@@ -639,14 +639,15 @@ static void __init prcm_setup_regs(void)
 	prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
 			  OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 
-	/* Enable GPIO wakeups in PER */
+	/* Enable wakeups in PER */
 	prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
 			  OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
-			  OMAP3430_EN_GPIO6, OMAP3430_PER_MOD, PM_WKEN);
+			  OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3,
+			  OMAP3430_PER_MOD, PM_WKEN);
 	/* and allow them to wake up MPU */
 	prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
 			  OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
-			  OMAP3430_GRPSEL_GPIO6,
+			  OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3,
 			  OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
 
 	/* Don't attach IVA interrupts */

arch/arm/mach-omap2/serial.c

@@ -109,16 +109,6 @@ static struct plat_serial8250_port serial_platform_data2[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
-#ifdef CONFIG_ARCH_OMAP4
-		.membase	= OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
-		.mapbase	= OMAP_UART4_BASE,
-		.irq		= 70,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP24XX_BASE_BAUD * 16,
-	}, {
-#endif
 		.flags		= 0
 	}
 };

arch/arm/plat-omap/dma.c

@@ -978,6 +978,14 @@ void omap_stop_dma(int lch)
 {
 	u32 l;
 
+	/* Disable all interrupts on the channel */
+	if (cpu_class_is_omap1())
+		dma_write(0, CICR(lch));
+
+	l = dma_read(CCR(lch));
+	l &= ~OMAP_DMA_CCR_EN;
+	dma_write(l, CCR(lch));
+
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch = lch;
 		char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
@@ -995,18 +1003,8 @@ void omap_stop_dma(int lch)
 			next_lch = dma_chan[cur_lch].next_lch;
 			cur_lch = next_lch;
 		} while (next_lch != -1);
-
-		return;
 	}
 
-	/* Disable all interrupts on the channel */
-	if (cpu_class_is_omap1())
-		dma_write(0, CICR(lch));
-
-	l = dma_read(CCR(lch));
-	l &= ~OMAP_DMA_CCR_EN;
-	dma_write(l, CCR(lch));
-
 	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 }
 EXPORT_SYMBOL(omap_stop_dma);

arch/arm/plat-omap/include/mach/keypad.h

@@ -10,7 +10,7 @@
 #ifndef ASMARM_ARCH_KEYPAD_H
 #define ASMARM_ARCH_KEYPAD_H
 
-#include <linux/input/matrix_keypad.h>
+#warning: Please update the board to use matrix_keypad.h instead
 
 struct omap_kp_platform_data {
 	int rows;
@@ -37,6 +37,9 @@ struct omap_kp_platform_data {
 
 #define KEY_PERSISTENT		0x00800000
 #define KEYNUM_MASK		0x00EFFFFF
+#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
+						KEY_PERSISTENT)
 
 #endif
 

arch/arm/plat-omap/iommu.c

@@ -664,7 +664,7 @@ static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
 		nent = 1; /* for the next L1 entry */
 	} else {
 		bytes = IOPGD_SIZE;
-		if (*iopgd & IOPGD_SUPER) {
+		if ((*iopgd & IOPGD_SUPER) == IOPGD_SUPER) {
 			nent *= 16;
 			/* rewind to the 1st entry */
 			iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK);