Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-01-20

This series contains updates to i40e driver only.

Jedrzej increases delay for EMP reset and adds checks to ensure a VF
request to change queues can be met.

Sylwester moves the placement of the Flow Director queue as to not
fragment the queue pile which would cause later re-allocation issues.

Karen prevents VF reset being invoked while another is still occurring
to avoid reading invalid data.

Joe Damato fixes some statistics fields to match the values of the
fields they are based on.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/i40e/i40e.h

@@ -174,7 +174,6 @@ enum i40e_interrupt_policy {
 
 struct i40e_lump_tracking {
 	u16 num_entries;
-	u16 search_hint;
 	u16 list[0];
 #define I40E_PILE_VALID_BIT  0x8000
 #define I40E_IWARP_IRQ_PILE_ID  (I40E_PILE_VALID_BIT - 2)
@@ -848,12 +847,12 @@ struct i40e_vsi {
 	struct rtnl_link_stats64 net_stats_offsets;
 	struct i40e_eth_stats eth_stats;
 	struct i40e_eth_stats eth_stats_offsets;
-	u32 tx_restart;
-	u32 tx_busy;
+	u64 tx_restart;
+	u64 tx_busy;
 	u64 tx_linearize;
 	u64 tx_force_wb;
-	u32 rx_buf_failed;
-	u32 rx_page_failed;
+	u64 rx_buf_failed;
+	u64 rx_page_failed;
 
 	/* These are containers of ring pointers, allocated at run-time */
 	struct i40e_ring **rx_rings;

drivers/net/ethernet/intel/i40e/i40e_debugfs.c

@@ -240,7 +240,7 @@ static void i40e_dbg_dump_vsi_seid(struct i40e_pf *pf, int seid)
 		 (unsigned long int)vsi->net_stats_offsets.rx_compressed,
 		 (unsigned long int)vsi->net_stats_offsets.tx_compressed);
 	dev_info(&pf->pdev->dev,
-		 "    tx_restart = %d, tx_busy = %d, rx_buf_failed = %d, rx_page_failed = %d\n",
+		 "    tx_restart = %llu, tx_busy = %llu, rx_buf_failed = %llu, rx_page_failed = %llu\n",
 		 vsi->tx_restart, vsi->tx_busy,
 		 vsi->rx_buf_failed, vsi->rx_page_failed);
 	rcu_read_lock();

drivers/net/ethernet/intel/i40e/i40e_main.c

@@ -196,10 +196,6 @@ int i40e_free_virt_mem_d(struct i40e_hw *hw, struct i40e_virt_mem *mem)
  * @id: an owner id to stick on the items assigned
  *
  * Returns the base item index of the lump, or negative for error
- *
- * The search_hint trick and lack of advanced fit-finding only work
- * because we're highly likely to have all the same size lump requests.
- * Linear search time and any fragmentation should be minimal.
  **/
 static int i40e_get_lump(struct i40e_pf *pf, struct i40e_lump_tracking *pile,
 			 u16 needed, u16 id)
@@ -214,8 +210,21 @@ static int i40e_get_lump(struct i40e_pf *pf, struct i40e_lump_tracking *pile,
 		return -EINVAL;
 	}
 
-	/* start the linear search with an imperfect hint */
-	i = pile->search_hint;
+	/* Allocate last queue in the pile for FDIR VSI queue
+	 * so it doesn't fragment the qp_pile
+	 */
+	if (pile == pf->qp_pile && pf->vsi[id]->type == I40E_VSI_FDIR) {
+		if (pile->list[pile->num_entries - 1] & I40E_PILE_VALID_BIT) {
+			dev_err(&pf->pdev->dev,
+				"Cannot allocate queue %d for I40E_VSI_FDIR\n",
+				pile->num_entries - 1);
+			return -ENOMEM;
+		}
+		pile->list[pile->num_entries - 1] = id | I40E_PILE_VALID_BIT;
+		return pile->num_entries - 1;
+	}
+
+	i = 0;
 	while (i < pile->num_entries) {
 		/* skip already allocated entries */
 		if (pile->list[i] & I40E_PILE_VALID_BIT) {
@@ -234,7 +243,6 @@ static int i40e_get_lump(struct i40e_pf *pf, struct i40e_lump_tracking *pile,
 			for (j = 0; j < needed; j++)
 				pile->list[i+j] = id | I40E_PILE_VALID_BIT;
 			ret = i;
-			pile->search_hint = i + j;
 			break;
 		}
 
@@ -257,7 +265,7 @@ static int i40e_put_lump(struct i40e_lump_tracking *pile, u16 index, u16 id)
 {
 	int valid_id = (id | I40E_PILE_VALID_BIT);
 	int count = 0;
-	int i;
+	u16 i;
 
 	if (!pile || index >= pile->num_entries)
 		return -EINVAL;
@@ -269,8 +277,6 @@ static int i40e_put_lump(struct i40e_lump_tracking *pile, u16 index, u16 id)
 		count++;
 	}
 
-	if (count && index < pile->search_hint)
-		pile->search_hint = index;
 
 	return count;
 }
@@ -772,9 +778,9 @@ static void i40e_update_vsi_stats(struct i40e_vsi *vsi)
 	struct rtnl_link_stats64 *ns;   /* netdev stats */
 	struct i40e_eth_stats *oes;
 	struct i40e_eth_stats *es;     /* device's eth stats */
-	u32 tx_restart, tx_busy;
+	u64 tx_restart, tx_busy;
 	struct i40e_ring *p;
-	u32 rx_page, rx_buf;
+	u64 rx_page, rx_buf;
 	u64 bytes, packets;
 	unsigned int start;
 	u64 tx_linearize;
@@ -10574,15 +10580,9 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
 	}
 	i40e_get_oem_version(&pf->hw);
 
-	if (test_bit(__I40E_EMP_RESET_INTR_RECEIVED, pf->state) &&
-	    ((hw->aq.fw_maj_ver == 4 && hw->aq.fw_min_ver <= 33) ||
-	     hw->aq.fw_maj_ver < 4) && hw->mac.type == I40E_MAC_XL710) {
-		/* The following delay is necessary for 4.33 firmware and older
-		 * to recover after EMP reset. 200 ms should suffice but we
-		 * put here 300 ms to be sure that FW is ready to operate
-		 * after reset.
-		 */
-		mdelay(300);
+	if (test_and_clear_bit(__I40E_EMP_RESET_INTR_RECEIVED, pf->state)) {
+		/* The following delay is necessary for firmware update. */
+		mdelay(1000);
 	}
 
 	/* re-verify the eeprom if we just had an EMP reset */
@@ -11792,7 +11792,6 @@ static int i40e_init_interrupt_scheme(struct i40e_pf *pf)
 		return -ENOMEM;
 
 	pf->irq_pile->num_entries = vectors;
-	pf->irq_pile->search_hint = 0;
 
 	/* track first vector for misc interrupts, ignore return */
 	(void)i40e_get_lump(pf, pf->irq_pile, 1, I40E_PILE_VALID_BIT - 1);
@@ -12595,7 +12594,6 @@ static int i40e_sw_init(struct i40e_pf *pf)
 		goto sw_init_done;
 	}
 	pf->qp_pile->num_entries = pf->hw.func_caps.num_tx_qp;
-	pf->qp_pile->search_hint = 0;
 
 	pf->tx_timeout_recovery_level = 1;
 

drivers/net/ethernet/intel/i40e/i40e_register.h

@@ -413,6 +413,9 @@
 #define I40E_VFINT_DYN_CTLN(_INTVF) (0x00024800 + ((_INTVF) * 4)) /* _i=0...511 */ /* Reset: VFR */
 #define I40E_VFINT_DYN_CTLN_CLEARPBA_SHIFT 1
 #define I40E_VFINT_DYN_CTLN_CLEARPBA_MASK I40E_MASK(0x1, I40E_VFINT_DYN_CTLN_CLEARPBA_SHIFT)
+#define I40E_VFINT_ICR0_ADMINQ_SHIFT 30
+#define I40E_VFINT_ICR0_ADMINQ_MASK I40E_MASK(0x1, I40E_VFINT_ICR0_ADMINQ_SHIFT)
+#define I40E_VFINT_ICR0_ENA(_VF) (0x0002C000 + ((_VF) * 4)) /* _i=0...127 */ /* Reset: CORER */
 #define I40E_VPINT_AEQCTL(_VF) (0x0002B800 + ((_VF) * 4)) /* _i=0...127 */ /* Reset: CORER */
 #define I40E_VPINT_AEQCTL_MSIX_INDX_SHIFT 0
 #define I40E_VPINT_AEQCTL_ITR_INDX_SHIFT 11

drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c

@@ -1376,6 +1376,32 @@ static i40e_status i40e_config_vf_promiscuous_mode(struct i40e_vf *vf,
 	return aq_ret;
 }
 
+/**
+ * i40e_sync_vfr_reset
+ * @hw: pointer to hw struct
+ * @vf_id: VF identifier
+ *
+ * Before trigger hardware reset, we need to know if no other process has
+ * reserved the hardware for any reset operations. This check is done by
+ * examining the status of the RSTAT1 register used to signal the reset.
+ **/
+static int i40e_sync_vfr_reset(struct i40e_hw *hw, int vf_id)
+{
+	u32 reg;
+	int i;
+
+	for (i = 0; i < I40E_VFR_WAIT_COUNT; i++) {
+		reg = rd32(hw, I40E_VFINT_ICR0_ENA(vf_id)) &
+			   I40E_VFINT_ICR0_ADMINQ_MASK;
+		if (reg)
+			return 0;
+
+		usleep_range(100, 200);
+	}
+
+	return -EAGAIN;
+}
+
 /**
  * i40e_trigger_vf_reset
  * @vf: pointer to the VF structure
@@ -1390,9 +1416,11 @@ static void i40e_trigger_vf_reset(struct i40e_vf *vf, bool flr)
 	struct i40e_pf *pf = vf->pf;
 	struct i40e_hw *hw = &pf->hw;
 	u32 reg, reg_idx, bit_idx;
+	bool vf_active;
+	u32 radq;
 
 	/* warn the VF */
-	clear_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states);
+	vf_active = test_and_clear_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states);
 
 	/* Disable VF's configuration API during reset. The flag is re-enabled
 	 * in i40e_alloc_vf_res(), when it's safe again to access VF's VSI.
@@ -1406,7 +1434,19 @@ static void i40e_trigger_vf_reset(struct i40e_vf *vf, bool flr)
 	 * just need to clean up, so don't hit the VFRTRIG register.
 	 */
 	if (!flr) {
-		/* reset VF using VPGEN_VFRTRIG reg */
+		/* Sync VFR reset before trigger next one */
+		radq = rd32(hw, I40E_VFINT_ICR0_ENA(vf->vf_id)) &
+			    I40E_VFINT_ICR0_ADMINQ_MASK;
+		if (vf_active && !radq)
+			/* waiting for finish reset by virtual driver */
+			if (i40e_sync_vfr_reset(hw, vf->vf_id))
+				dev_info(&pf->pdev->dev,
+					 "Reset VF %d never finished\n",
+				vf->vf_id);
+
+		/* Reset VF using VPGEN_VFRTRIG reg. It is also setting
+		 * in progress state in rstat1 register.
+		 */
 		reg = rd32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id));
 		reg |= I40E_VPGEN_VFRTRIG_VFSWR_MASK;
 		wr32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id), reg);
@@ -2617,6 +2657,59 @@ static int i40e_vc_disable_queues_msg(struct i40e_vf *vf, u8 *msg)
 				       aq_ret);
 }
 
+/**
+ * i40e_check_enough_queue - find big enough queue number
+ * @vf: pointer to the VF info
+ * @needed: the number of items needed
+ *
+ * Returns the base item index of the queue, or negative for error
+ **/
+static int i40e_check_enough_queue(struct i40e_vf *vf, u16 needed)
+{
+	unsigned int  i, cur_queues, more, pool_size;
+	struct i40e_lump_tracking *pile;
+	struct i40e_pf *pf = vf->pf;
+	struct i40e_vsi *vsi;
+
+	vsi = pf->vsi[vf->lan_vsi_idx];
+	cur_queues = vsi->alloc_queue_pairs;
+
+	/* if current allocated queues are enough for need */
+	if (cur_queues >= needed)
+		return vsi->base_queue;
+
+	pile = pf->qp_pile;
+	if (cur_queues > 0) {
+		/* if the allocated queues are not zero
+		 * just check if there are enough queues for more
+		 * behind the allocated queues.
+		 */
+		more = needed - cur_queues;
+		for (i = vsi->base_queue + cur_queues;
+			i < pile->num_entries; i++) {
+			if (pile->list[i] & I40E_PILE_VALID_BIT)
+				break;
+
+			if (more-- == 1)
+				/* there is enough */
+				return vsi->base_queue;
+		}
+	}
+
+	pool_size = 0;
+	for (i = 0; i < pile->num_entries; i++) {
+		if (pile->list[i] & I40E_PILE_VALID_BIT) {
+			pool_size = 0;
+			continue;
+		}
+		if (needed <= ++pool_size)
+			/* there is enough */
+			return i;
+	}
+
+	return -ENOMEM;
+}
+
 /**
  * i40e_vc_request_queues_msg
  * @vf: pointer to the VF info
@@ -2651,6 +2744,12 @@ static int i40e_vc_request_queues_msg(struct i40e_vf *vf, u8 *msg)
 			 req_pairs - cur_pairs,
 			 pf->queues_left);
 		vfres->num_queue_pairs = pf->queues_left + cur_pairs;
+	} else if (i40e_check_enough_queue(vf, req_pairs) < 0) {
+		dev_warn(&pf->pdev->dev,
+			 "VF %d requested %d more queues, but there is not enough for it.\n",
+			 vf->vf_id,
+			 req_pairs - cur_pairs);
+		vfres->num_queue_pairs = cur_pairs;
 	} else {
 		/* successful request */
 		vf->num_req_queues = req_pairs;

drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h

@@ -19,6 +19,7 @@
 #define I40E_MAX_VF_PROMISC_FLAGS	3
 
 #define I40E_VF_STATE_WAIT_COUNT	20
+#define I40E_VFR_WAIT_COUNT		100
 
 /* Various queue ctrls */
 enum i40e_queue_ctrl {