Commit 0bdf5a05 authored by Takashi Iwai's avatar Takashi Iwai

drm/i915: Add reverse mapping between port and intel_encoder

This patch adds a reverse mapping from a digital port number to
intel_encoder object containing the corresponding intel_digital_port.
It simplifies the query of the encoder a lot.

Note that, even if it's a valid digital port, the dig_port_map[] might
point still to NULL -- usually it implies a DP MST port.  Due to this
fact, the NULL check in each place has no WARN_ON() and just skips the
port.  Once when the situation changes in future, we might introduce
WARN_ON() for a more strict check.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent cae666ce
......@@ -1944,6 +1944,8 @@ struct drm_i915_private {
/* perform PHY state sanity checks? */
bool chv_phy_assert[2];
struct intel_encoder *dig_port_map[I915_MAX_PORTS];
/*
* NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch
* will be rejected. Instead look for a better place.
......
......@@ -636,15 +636,14 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
int port, int rate)
{
struct drm_i915_private *dev_priv = dev_to_i915(dev);
struct drm_device *drm_dev = dev_priv->dev;
struct intel_encoder *intel_encoder;
struct intel_digital_port *intel_dig_port;
struct intel_crtc *crtc;
struct drm_display_mode *mode;
struct i915_audio_component *acomp = dev_priv->audio_component;
enum pipe pipe = -1;
enum pipe pipe = INVALID_PIPE;
u32 tmp;
int n;
int err = 0;
/* HSW, BDW, SKL, KBL need this fix */
if (!IS_SKYLAKE(dev_priv) &&
......@@ -655,26 +654,22 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
mutex_lock(&dev_priv->av_mutex);
/* 1. get the pipe */
for_each_intel_encoder(drm_dev, intel_encoder) {
if (intel_encoder->type != INTEL_OUTPUT_HDMI)
continue;
intel_dig_port = enc_to_dig_port(&intel_encoder->base);
if (port == intel_dig_port->port) {
crtc = to_intel_crtc(intel_encoder->base.crtc);
if (!crtc) {
DRM_DEBUG_KMS("%s: crtc is NULL\n", __func__);
continue;
intel_encoder = dev_priv->dig_port_map[port];
/* intel_encoder might be NULL for DP MST */
if (!intel_encoder || !intel_encoder->base.crtc ||
intel_encoder->type != INTEL_OUTPUT_HDMI) {
DRM_DEBUG_KMS("no valid port %c\n", port_name(port));
err = -ENODEV;
goto unlock;
}
crtc = to_intel_crtc(intel_encoder->base.crtc);
pipe = crtc->pipe;
break;
}
}
if (pipe == INVALID_PIPE) {
DRM_DEBUG_KMS("no pipe for the port %c\n", port_name(port));
mutex_unlock(&dev_priv->av_mutex);
return -ENODEV;
err = -ENODEV;
goto unlock;
}
DRM_DEBUG_KMS("pipe %c connects port %c\n",
pipe_name(pipe), port_name(port));
mode = &crtc->config->base.adjusted_mode;
......@@ -687,8 +682,7 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
tmp = I915_READ(HSW_AUD_CFG(pipe));
tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
I915_WRITE(HSW_AUD_CFG(pipe), tmp);
mutex_unlock(&dev_priv->av_mutex);
return 0;
goto unlock;
}
n = audio_config_get_n(mode, rate);
......@@ -698,8 +692,7 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
tmp = I915_READ(HSW_AUD_CFG(pipe));
tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
I915_WRITE(HSW_AUD_CFG(pipe), tmp);
mutex_unlock(&dev_priv->av_mutex);
return 0;
goto unlock;
}
/* 3. set the N/CTS/M */
......@@ -707,8 +700,9 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
tmp = audio_config_setup_n_reg(n, tmp);
I915_WRITE(HSW_AUD_CFG(pipe), tmp);
unlock:
mutex_unlock(&dev_priv->av_mutex);
return 0;
return err;
}
static int i915_audio_component_get_eld(struct device *dev, int port,
......@@ -716,27 +710,22 @@ static int i915_audio_component_get_eld(struct device *dev, int port,
unsigned char *buf, int max_bytes)
{
struct drm_i915_private *dev_priv = dev_to_i915(dev);
struct drm_device *drm_dev = dev_priv->dev;
struct intel_encoder *intel_encoder;
struct intel_digital_port *intel_dig_port;
const u8 *eld;
int ret = -EINVAL;
mutex_lock(&dev_priv->av_mutex);
for_each_intel_encoder(drm_dev, intel_encoder) {
if (intel_encoder->type != INTEL_OUTPUT_DISPLAYPORT &&
intel_encoder->type != INTEL_OUTPUT_HDMI)
continue;
intel_dig_port = enc_to_dig_port(&intel_encoder->base);
if (port == intel_dig_port->port) {
intel_encoder = dev_priv->dig_port_map[port];
/* intel_encoder might be NULL for DP MST */
if (intel_encoder) {
ret = 0;
intel_dig_port = enc_to_dig_port(&intel_encoder->base);
*enabled = intel_dig_port->audio_connector != NULL;
if (!*enabled)
break;
if (*enabled) {
eld = intel_dig_port->audio_connector->eld;
ret = drm_eld_size(eld);
memcpy(buf, eld, min(max_bytes, ret));
break;
}
}
......
......@@ -3295,6 +3295,7 @@ void intel_ddi_init(struct drm_device *dev, enum port port)
intel_encoder->get_config = intel_ddi_get_config;
intel_dig_port->port = port;
dev_priv->dig_port_map[port] = intel_encoder;
intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) &
(DDI_BUF_PORT_REVERSAL |
DDI_A_4_LANES);
......
......@@ -6003,6 +6003,7 @@ intel_dp_init(struct drm_device *dev,
}
intel_dig_port->port = port;
dev_priv->dig_port_map[port] = intel_encoder;
intel_dig_port->dp.output_reg = output_reg;
intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
......
......@@ -2148,6 +2148,7 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
void intel_hdmi_init(struct drm_device *dev,
i915_reg_t hdmi_reg, enum port port)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_digital_port *intel_dig_port;
struct intel_encoder *intel_encoder;
struct intel_connector *intel_connector;
......@@ -2216,6 +2217,7 @@ void intel_hdmi_init(struct drm_device *dev,
intel_encoder->cloneable |= 1 << INTEL_OUTPUT_HDMI;
intel_dig_port->port = port;
dev_priv->dig_port_map[port] = intel_encoder;
intel_dig_port->hdmi.hdmi_reg = hdmi_reg;
intel_dig_port->dp.output_reg = INVALID_MMIO_REG;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment