Merge tag 'mvebu_everything_for_3.8' of git://git.infradead.org/users/jcooper/linux into late/mvebu

From Jason Cooper. Unfortunately this is a combined branch with all
mvebu code as one drop, something we normally try to avoid and instead
slice vendor topics across our branches. Hopefully we can avoid doing
this again for 3.9!

mvebu everything for v3.8
 - due to the complex interdependencies of the received pull requests
   I decided to keep this in one branch the way they recommended merging it
 - this was their first attempt at doing pull requests, we'll work on it
   with them

 - added SMP support for mvebu SoCs
 - added coherency fabric
 - added mdio and mvneta drivers
 - added mirabox board
 - added openblocks ax3-4 board
 - clock fixes and improvements
 - converted mv_xor driver to devicetree (extensive series in itself)

* tag 'mvebu_everything_for_3.8' of git://git.infradead.org/users/jcooper/linux: (85 commits)
  dma: mv_xor: fix error handling path
  dma: mv_xor: fix error checking of irq_of_parse_and_map()
  dma: mv_xor: use request_irq() instead of devm_request_irq()
  dma: mv_xor: clear the window override control registers
  arm: mvebu: fix address decoding armada_cfg_base() function
  ARM: mvebu: update defconfig with I2C and RTC support
  ARM: mvebu: Add SATA support for OpenBlocks AX3-4
  ARM: mvebu: Add support for the RTC in OpenBlocks AX3-4
  ARM: mvebu: Add support for I2C on OpenBlocks AX3-4
  ARM: mvebu: Add support for I2C controllers in Armada 370/XP
  arm: mvebu: Add hardware I/O Coherency support
  arm: plat-orion: Add coherency attribute when setup mbus target
  arm: dma mapping: Export a dma ops function arm_dma_set_mask
  arm: mvebu: Add SMP support for Armada XP
  arm: mm: Add support for PJ4B cpu and init routines
  arm: mvebu: Add IPI support via doorbells
  arm: mvebu: Add initial support for power managmement service unit
  arm: mvebu: Add support for coherency fabric in mach-mvebu
  arm: mvebu: update defconfig to include XOR driver
  arm: mvebu: update defconfig to include network driver
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt

@@ -6,9 +6,15 @@ Required properties:
 - interrupt-controller: Identifies the node as an interrupt controller.
 - #interrupt-cells: The number of cells to define the interrupts. Should be 1.
   The cell is the IRQ number
+
 - reg: Should contain PMIC registers location and length. First pair
   for the main interrupt registers, second pair for the per-CPU
-  interrupt registers
+  interrupt registers. For this last pair, to be compliant with SMP
+  support, the "virtual" must be use (For the record, these registers
+  automatically map to the interrupt controller registers of the
+  current CPU)
+
+
 
 Example:
 
@@ -18,6 +24,6 @@ Example:
               #address-cells = <1>;
               #size-cells = <1>;
               interrupt-controller;
-              reg = <0xd0020000 0x1000>,
-                    <0xd0021000 0x1000>;
+              reg = <0xd0020a00 0x1d0>,
+                    <0xd0021070 0x58>;
         };

Documentation/devicetree/bindings/arm/armada-370-xp-pmsu.txt

+Power Management Service Unit(PMSU)
+-----------------------------------
+Available on Marvell SOCs: Armada 370 and Armada XP
+
+Required properties:
+
+- compatible: "marvell,armada-370-xp-pmsu"
+
+- reg: Should contain PMSU registers location and length. First pair
+  for the per-CPU SW Reset Control registers, second pair for the
+  Power Management Service Unit.
+
+Example:
+
+armada-370-xp-pmsu@d0022000 {
+	compatible = "marvell,armada-370-xp-pmsu";
+	reg = <0xd0022100 0x430>,
+	      <0xd0020800 0x20>;
+};
+

Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt

@@ -5,6 +5,7 @@ Required properties:
 - compatible: Should be "marvell,armada-370-xp-timer"
 - interrupts: Should contain the list of Global Timer interrupts
 - reg: Should contain the base address of the Global Timer registers
+- clocks: clock driving the timer hardware
 
 Optional properties:
 - marvell,timer-25Mhz: Tells whether the Global timer supports the 25

Documentation/devicetree/bindings/arm/coherency-fabric.txt

+Coherency fabric
+----------------
+Available on Marvell SOCs: Armada 370 and Armada XP
+
+Required properties:
+
+- compatible: "marvell,coherency-fabric"
+
+- reg: Should contain coherency fabric registers location and
+  length. First pair for the coherency fabric registers, second pair
+  for the per-CPU fabric registers registers.
+
+Example:
+
+coherency-fabric@d0020200 {
+	compatible = "marvell,coherency-fabric";
+	reg = <0xd0020200 0xb0>,
+		<0xd0021810 0x1c>;
+
+};
+

Documentation/devicetree/bindings/clock/mvebu-core-clock.txt

+* Core Clock bindings for Marvell MVEBU SoCs
+
+Marvell MVEBU SoCs usually allow to determine core clock frequencies by
+reading the Sample-At-Reset (SAR) register. The core clock consumer should
+specify the desired clock by having the clock ID in its "clocks" phandle cell.
+
+The following is a list of provided IDs and clock names on Armada 370/XP:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = nbclk   (L2 Cache clock)
+ 3 = hclk    (DRAM control clock)
+ 4 = dramclk (DDR clock)
+
+The following is a list of provided IDs and clock names on Kirkwood and Dove:
+ 0 = tclk   (Internal Bus clock)
+ 1 = cpuclk (CPU0 clock)
+ 2 = l2clk  (L2 Cache clock derived from CPU0 clock)
+ 3 = ddrclk (DDR controller clock derived from CPU0 clock)
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,armada-370-core-clock" - For Armada 370 SoC core clocks
+	"marvell,armada-xp-core-clock" - For Armada XP SoC core clocks
+	"marvell,dove-core-clock" - for Dove SoC core clocks
+	"marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
+	"marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC
+- reg : shall be the register address of the Sample-At-Reset (SAR) register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Optional properties:
+- clock-output-names : from common clock binding; allows overwrite default clock
+	output names ("tclk", "cpuclk", "l2clk", "ddrclk")
+
+Example:
+
+core_clk: core-clocks@d0214 {
+	compatible = "marvell,dove-core-clock";
+	reg = <0xd0214 0x4>;
+	#clock-cells = <1>;
+};
+
+spi0: spi@10600 {
+	compatible = "marvell,orion-spi";
+	/* ... */
+	/* get tclk from core clock provider */
+	clocks = <&core_clk 0>;
+};

Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt

+Device Tree Clock bindings for cpu clock of Marvell EBU platforms
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP
+- reg : Address and length of the clock complex register set
+- #clock-cells : should be set to 1.
+- clocks : shall be the input parent clock phandle for the clock.
+
+cpuclk: clock-complex@d0018700 {
+	#clock-cells = <1>;
+	compatible = "marvell,armada-xp-cpu-clock";
+	reg = <0xd0018700 0xA0>;
+	clocks = <&coreclk 1>;
+}
+
+cpu@0 {
+	compatible = "marvell,sheeva-v7";
+	reg = <0>;
+	clocks = <&cpuclk 0>;
+};

Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt

+* Gated Clock bindings for Marvell Orion SoCs
+
+Marvell Dove and Kirkwood allow some peripheral clocks to be gated to save
+some power. The clock consumer should specify the desired clock by having
+the clock ID in its "clocks" phandle cell. The clock ID is directly mapped to
+the corresponding clock gating control bit in HW to ease manual clock lookup
+in datasheet.
+
+The following is a list of provided IDs for Armada 370:
+ID	Clock	Peripheral
+-----------------------------------
+0	Audio	AC97 Cntrl
+1	pex0_en	PCIe 0 Clock out
+2	pex1_en	PCIe 1 Clock out
+3	ge1	Gigabit Ethernet 1
+4	ge0	Gigabit Ethernet 0
+5	pex0	PCIe Cntrl 0
+9	pex1	PCIe Cntrl 1
+15	sata0	SATA Host 0
+17	sdio	SDHCI Host
+25	tdm	Time Division Mplx
+28	ddr	DDR Cntrl
+30	sata1	SATA Host 0
+
+The following is a list of provided IDs for Armada XP:
+ID	Clock	Peripheral
+-----------------------------------
+0	audio	Audio Cntrl
+1	ge3	Gigabit Ethernet 3
+2	ge2	Gigabit Ethernet 2
+3	ge1	Gigabit Ethernet 1
+4	ge0	Gigabit Ethernet 0
+5	pex0	PCIe Cntrl 0
+6	pex1	PCIe Cntrl 1
+7	pex2	PCIe Cntrl 2
+8	pex3	PCIe Cntrl 3
+13	bp
+14	sata0lnk
+15	sata0	SATA Host 0
+16	lcd	LCD Cntrl
+17	sdio	SDHCI Host
+18	usb0	USB Host 0
+19	usb1	USB Host 1
+20	usb2	USB Host 2
+22	xor0	XOR DMA 0
+23	crypto	CESA engine
+25	tdm	Time Division Mplx
+28	xor1	XOR DMA 1
+29	sata1lnk
+30	sata1	SATA Host 0
+
+The following is a list of provided IDs for Dove:
+ID	Clock	Peripheral
+-----------------------------------
+0	usb0	USB Host 0
+1	usb1	USB Host 1
+2	ge	Gigabit Ethernet
+3	sata	SATA Host
+4	pex0	PCIe Cntrl 0
+5	pex1	PCIe Cntrl 1
+8	sdio0	SDHCI Host 0
+9	sdio1	SDHCI Host 1
+10	nand	NAND Cntrl
+11	camera	Camera Cntrl
+12	i2s0	I2S Cntrl 0
+13	i2s1	I2S Cntrl 1
+15	crypto	CESA engine
+21	ac97	AC97 Cntrl
+22	pdma	Peripheral DMA
+23	xor0	XOR DMA 0
+24	xor1	XOR DMA 1
+30	gephy	Gigabit Ethernel PHY
+Note: gephy(30) is implemented as a parent clock of ge(2)
+
+The following is a list of provided IDs for Kirkwood:
+ID	Clock	Peripheral
+-----------------------------------
+0	ge0	Gigabit Ethernet 0
+2	pex0	PCIe Cntrl 0
+3	usb0	USB Host 0
+4	sdio	SDIO Cntrl
+5	tsu	Transp. Stream Unit
+6	dunit	SDRAM Cntrl
+7	runit	Runit
+8	xor0	XOR DMA 0
+9	audio	I2S Cntrl 0
+14	sata0	SATA Host 0
+15	sata1	SATA Host 1
+16	xor1	XOR DMA 1
+17	crypto	CESA engine
+18	pex1	PCIe Cntrl 1
+19	ge1	Gigabit Ethernet 0
+20	tdm	Time Division Mplx
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,dove-gating-clock" - for Dove SoC clock gating
+	"marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
+- reg : shall be the register address of the Clock Gating Control register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Optional properties:
+- clocks : default parent clock phandle (e.g. tclk)
+
+Example:
+
+gate_clk: clock-gating-control@d0038 {
+	compatible = "marvell,dove-gating-clock";
+	reg = <0xd0038 0x4>;
+	/* default parent clock is tclk */
+	clocks = <&core_clk 0>;
+	#clock-cells = <1>;
+};
+
+sdio0: sdio@92000 {
+	compatible = "marvell,dove-sdhci";
+	/* get clk gate bit 8 (sdio0) */
+	clocks = <&gate_clk 8>;
+};

Documentation/devicetree/bindings/dma/mv-xor.txt

+* Marvell XOR engines
+
+Required properties:
+- compatible: Should be "marvell,orion-xor"
+- reg: Should contain registers location and length (two sets)
+    the first set is the low registers, the second set the high
+    registers for the XOR engine.
+- clocks: pointer to the reference clock
+
+The DT node must also contains sub-nodes for each XOR channel that the
+XOR engine has. Those sub-nodes have the following required
+properties:
+- interrupts: interrupt of the XOR channel
+
+And the following optional properties:
+- dmacap,memcpy to indicate that the XOR channel is capable of memcpy operations
+- dmacap,memset to indicate that the XOR channel is capable of memset operations
+- dmacap,xor to indicate that the XOR channel is capable of xor operations
+
+Example:
+
+xor@d0060900 {
+	compatible = "marvell,orion-xor";
+	reg = <0xd0060900 0x100
+	       0xd0060b00 0x100>;
+	clocks = <&coreclk 0>;
+	status = "okay";
+
+	xor00 {
+	      interrupts = <51>;
+	      dmacap,memcpy;
+	      dmacap,xor;
+	};
+	xor01 {
+	      interrupts = <52>;
+	      dmacap,memcpy;
+	      dmacap,xor;
+	      dmacap,memset;
+	};
+};

Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt

+* Marvell Armada 370 / Armada XP Ethernet Controller (NETA)
+
+Required properties:
+- compatible: should be "marvell,armada-370-neta".
+- reg: address and length of the register set for the device.
+- interrupts: interrupt for the device
+- phy: A phandle to a phy node defining the PHY address (as the reg
+  property, a single integer).
+- phy-mode: The interface between the SoC and the PHY (a string that
+  of_get_phy_mode() can understand)
+- clocks: a pointer to the reference clock for this device.
+
+Example:
+
+ethernet@d0070000 {
+	compatible = "marvell,armada-370-neta";
+	reg = <0xd0070000 0x2500>;
+	interrupts = <8>;
+	clocks = <&gate_clk 4>;
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};

Documentation/devicetree/bindings/net/marvell-orion-mdio.txt

+* Marvell MDIO Ethernet Controller interface
+
+The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x,
+MV78xx0, Armada 370 and Armada XP have an identical unit that provides
+an interface with the MDIO bus. This driver handles this MDIO
+interface.
+
+Required properties:
+- compatible: "marvell,orion-mdio"
+- reg: address and length of the SMI register
+
+The child nodes of the MDIO driver are the individual PHY devices
+connected to this MDIO bus. They must have a "reg" property given the
+PHY address on the MDIO bus.
+
+Example at the SoC level:
+
+mdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "marvell,orion-mdio";
+	reg = <0xd0072004 0x4>;
+};
+
+And at the board level:
+
+mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+}

MAINTAINERS

@@ -4757,6 +4757,12 @@ S:	Maintained
 F:	drivers/net/ethernet/marvell/mv643xx_eth.*
 F:	include/linux/mv643xx.h
 
+MARVELL MVNETA ETHERNET DRIVER
+M:	Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/ethernet/marvell/mvneta.*
+
 MARVELL MWIFIEX WIRELESS DRIVER
 M:	Bing Zhao <bzhao@marvell.com>
 L:	linux-wireless@vger.kernel.org

arch/arm/Kconfig

@@ -533,6 +533,7 @@ config ARCH_IXP4XX
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select ARCH_REQUIRE_GPIOLIB
+	select COMMON_CLK_DOVE
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI

arch/arm/boot/dts/Makefile

@@ -44,7 +44,9 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
 dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
 	msm8960-cdp.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
-	armada-xp-db.dtb
+	armada-370-mirabox.dtb \
+	armada-xp-db.dtb \
+	armada-xp-openblocks-ax3-4.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
 	imx53-ard.dtb \
 	imx53-evk.dtb \

arch/arm/boot/dts/armada-370-db.dts

@@ -34,9 +34,30 @@ serial@d0012000 {
 			clock-frequency = <200000000>;
 			status = "okay";
 		};
-		timer@d0020300 {
-			clock-frequency = <600000000>;
+		sata@d00a0000 {
+			nr-ports = <2>;
 			status = "okay";
 		};
+
+		mdio {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		ethernet@d0070000 {
+			status = "okay";
+			phy = <&phy0>;
+			phy-mode = "rgmii-id";
+		};
+		ethernet@d0074000 {
+			status = "okay";
+			phy = <&phy1>;
+			phy-mode = "rgmii-id";
+		};
 	};
 };

arch/arm/boot/dts/armada-370-mirabox.dts

+/*
+ * Device Tree file for Globalscale Mirabox
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "armada-370.dtsi"
+
+/ {
+	model = "Globalscale Mirabox";
+	compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		serial@d0012000 {
+			clock-frequency = <200000000>;
+			status = "okay";
+		};
+		timer@d0020300 {
+			clock-frequency = <600000000>;
+			status = "okay";
+		};
+		mdio {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+		ethernet@d0070000 {
+			status = "okay";
+			phy = <&phy0>;
+			phy-mode = "rgmii-id";
+		};
+		ethernet@d0074000 {
+			status = "okay";
+			phy = <&phy1>;
+			phy-mode = "rgmii-id";
+		};
+	};
+};

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -20,7 +20,7 @@
 
 / {
 	model = "Marvell Armada 370 and XP SoC";
-	compatible = "marvell,armada_370_xp";
+	compatible = "marvell,armada-370-xp";
 
 	cpus {
 		cpu@0 {
@@ -36,6 +36,12 @@ mpic: interrupt-controller@d0020000 {
 	      interrupt-controller;
 	};
 
+	coherency-fabric@d0020200 {
+		compatible = "marvell,coherency-fabric";
+		reg = <0xd0020200 0xb0>,
+		      <0xd0021810 0x1c>;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -62,12 +68,67 @@ timer@d0020300 {
 			       compatible = "marvell,armada-370-xp-timer";
 			       reg = <0xd0020300 0x30>;
 			       interrupts = <37>, <38>, <39>, <40>;
+			       clocks = <&coreclk 2>;
 		};
 
 		addr-decoding@d0020000 {
 			compatible = "marvell,armada-addr-decoding-controller";
 			reg = <0xd0020000 0x258>;
 		};
+
+		sata@d00a0000 {
+			compatible = "marvell,orion-sata";
+			reg = <0xd00a0000 0x2400>;
+			interrupts = <55>;
+			clocks = <&gateclk 15>, <&gateclk 30>;
+			clock-names = "0", "1";
+			status = "disabled";
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,orion-mdio";
+			reg = <0xd0072004 0x4>;
+		};
+
+		ethernet@d0070000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0xd0070000 0x2500>;
+				interrupts = <8>;
+				clocks = <&gateclk 4>;
+				status = "disabled";
+		};
+
+		ethernet@d0074000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0xd0074000 0x2500>;
+				interrupts = <10>;
+				clocks = <&gateclk 3>;
+				status = "disabled";
+		};
+
+		i2c0: i2c@d0011000 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0xd0011000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <31>;
+			timeout-ms = <1000>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@d0011100 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0xd0011100 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <32>;
+			timeout-ms = <1000>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 };
 

arch/arm/boot/dts/armada-370.dtsi

@@ -75,5 +75,56 @@ gpio2: gpio@d0018180 {
 			#interrupts-cells = <2>;
 			interrupts = <91>;
 		};
+
+		coreclk: mvebu-sar@d0018230 {
+			compatible = "marvell,armada-370-core-clock";
+			reg = <0xd0018230 0x08>;
+			#clock-cells = <1>;
+		};
+
+		gateclk: clock-gating-control@d0018220 {
+			compatible = "marvell,armada-370-gating-clock";
+			reg = <0xd0018220 0x4>;
+			clocks = <&coreclk 0>;
+			#clock-cells = <1>;
+		};
+
+		xor@d0060800 {
+			compatible = "marvell,orion-xor";
+			reg = <0xd0060800 0x100
+			       0xd0060A00 0x100>;
+			status = "okay";
+
+			xor00 {
+				interrupts = <51>;
+				dmacap,memcpy;
+				dmacap,xor;
+			};
+			xor01 {
+				interrupts = <52>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
+			};
+		};
+
+		xor@d0060900 {
+			compatible = "marvell,orion-xor";
+			reg = <0xd0060900 0x100
+			       0xd0060b00 0x100>;
+			status = "okay";
+
+			xor10 {
+				interrupts = <94>;
+				dmacap,memcpy;
+				dmacap,xor;
+			};
+			xor11 {
+				interrupts = <95>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
+			};
+		};
 	};
 };

arch/arm/boot/dts/armada-xp-db.dts

@@ -46,5 +46,49 @@ serial@d0012300 {
 			clock-frequency = <250000000>;
 			status = "okay";
 		};
+
+		sata@d00a0000 {
+			nr-ports = <2>;
+			status = "okay";
+		};
+
+		mdio {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			phy2: ethernet-phy@2 {
+				reg = <25>;
+			};
+
+			phy3: ethernet-phy@3 {
+				reg = <27>;
+			};
+		};
+
+		ethernet@d0070000 {
+			status = "okay";
+			phy = <&phy0>;
+			phy-mode = "rgmii-id";
+		};
+		ethernet@d0074000 {
+			status = "okay";
+			phy = <&phy1>;
+			phy-mode = "rgmii-id";
+		};
+		ethernet@d0030000 {
+			status = "okay";
+			phy = <&phy2>;
+			phy-mode = "sgmii";
+		};
+		ethernet@d0034000 {
+			status = "okay";
+			phy = <&phy3>;
+			phy-mode = "sgmii";
+		};
 	};
 };

arch/arm/boot/dts/armada-xp-mv78230.dtsi

@@ -24,6 +24,18 @@ aliases {
 		gpio1 = &gpio1;
 	};
 
+	cpus {
+	    #address-cells = <1>;
+	    #size-cells = <0>;
+
+	    cpu@0 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <0>;
+		clocks = <&cpuclk 0>;
+	    };
+	}
+
 	soc {
 		pinctrl {
 			compatible = "marvell,mv78230-pinctrl";

arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -25,6 +25,25 @@ aliases {
 		gpio2 = &gpio2;
 	};
 
+	cpus {
+	    #address-cells = <1>;
+	    #size-cells = <0>;
+
+	    cpu@0 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <0>;
+		clocks = <&cpuclk 0>;
+	    };
+
+	    cpu@1 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <1>;
+		clocks = <&cpuclk 1>;
+	    };
+	};
+
 	soc {
 		pinctrl {
 			compatible = "marvell,mv78260-pinctrl";

arch/arm/boot/dts/armada-xp-mv78460.dtsi

@@ -25,6 +25,40 @@ aliases {
 		gpio2 = &gpio2;
 	};
 
+
+	cpus {
+	    #address-cells = <1>;
+	    #size-cells = <0>;
+
+	    cpu@0 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <0>;
+		clocks = <&cpuclk 0>;
+	    };
+
+	    cpu@1 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <1>;
+		clocks = <&cpuclk 1>;
+	    };
+
+	    cpu@2 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <2>;
+		clocks = <&cpuclk 2>;
+	    };
+
+	    cpu@3 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <3>;
+		clocks = <&cpuclk 3>;
+	    };
+	};
+
 	soc {
 		pinctrl {
 			compatible = "marvell,mv78460-pinctrl";

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

+/*
+ * Device Tree file for OpenBlocks AX3-4 board
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "armada-xp-mv78260.dtsi"
+
+/ {
+	model = "PlatHome OpenBlocks AX3-4 board";
+	compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0xC0000000>; /* 3 GB */
+	};
+
+	soc {
+		serial@d0012000 {
+			clock-frequency = <250000000>;
+			status = "okay";
+		};
+		serial@d0012100 {
+			clock-frequency = <250000000>;
+			status = "okay";
+		};
+		pinctrl {
+			led_pins: led-pins-0 {
+				marvell,pins = "mpp49", "mpp51", "mpp53";
+				marvell,function = "gpio";
+			};
+		};
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_pins>;
+
+			red_led {
+				label = "red_led";
+				gpios = <&gpio1 17 1>;
+				default-state = "off";
+			};
+
+			yellow_led {
+				label = "yellow_led";
+				gpios = <&gpio1 19 1>;
+				default-state = "off";
+			};
+
+			green_led {
+				label = "green_led";
+				gpios = <&gpio1 21 1>;
+				default-state = "off";
+				linux,default-trigger = "heartbeat";
+			};
+		};
+
+		mdio {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			phy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			phy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
+		ethernet@d0070000 {
+			status = "okay";
+			phy = <&phy0>;
+			phy-mode = "sgmii";
+		};
+		ethernet@d0074000 {
+			status = "okay";
+			phy = <&phy1>;
+			phy-mode = "sgmii";
+		};
+		ethernet@d0030000 {
+			status = "okay";
+			phy = <&phy2>;
+			phy-mode = "sgmii";
+		};
+		ethernet@d0034000 {
+			status = "okay";
+			phy = <&phy3>;
+			phy-mode = "sgmii";
+		};
+		i2c@d0011000 {
+			status = "okay";
+			clock-frequency = <400000>;
+		};
+		i2c@d0011100 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			s35390a: s35390a@30 {
+				compatible = "s35390a";
+				reg = <0x30>;
+			};
+		};
+		sata@d00a0000 {
+			nr-ports = <2>;
+			status = "okay";
+		};
+	};
+};

arch/arm/boot/dts/armada-xp.dtsi

@@ -24,7 +24,13 @@ / {
 
 	mpic: interrupt-controller@d0020000 {
 	      reg = <0xd0020a00 0x1d0>,
-		    <0xd0021870 0x58>;
+		    <0xd0021070 0x58>;
+	};
+
+	armada-370-xp-pmsu@d0022000 {
+		compatible = "marvell,armada-370-xp-pmsu";
+		reg = <0xd0022100 0x430>,
+		      <0xd0020800 0x20>;
 	};
 
 	soc {
@@ -47,9 +53,85 @@ timer@d0020300 {
 				marvell,timer-25Mhz;
 		};
 
+		coreclk: mvebu-sar@d0018230 {
+			compatible = "marvell,armada-xp-core-clock";
+			reg = <0xd0018230 0x08>;
+			#clock-cells = <1>;
+		};
+
+		cpuclk: clock-complex@d0018700 {
+			#clock-cells = <1>;
+			compatible = "marvell,armada-xp-cpu-clock";
+			reg = <0xd0018700 0xA0>;
+			clocks = <&coreclk 1>;
+		};
+
+		gateclk: clock-gating-control@d0018220 {
+			compatible = "marvell,armada-xp-gating-clock";
+			reg = <0xd0018220 0x4>;
+			clocks = <&coreclk 0>;
+			#clock-cells = <1>;
+		};
+
 		system-controller@d0018200 {
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0xd0018200 0x500>;
 		};
+
+		ethernet@d0030000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0xd0030000 0x2500>;
+				interrupts = <12>;
+				clocks = <&gateclk 2>;
+				status = "disabled";
+		};
+
+		ethernet@d0034000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0xd0034000 0x2500>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+		};
+
+		xor@d0060900 {
+			compatible = "marvell,orion-xor";
+			reg = <0xd0060900 0x100
+			       0xd0060b00 0x100>;
+			clocks = <&gateclk 22>;
+			status = "okay";
+
+			xor10 {
+				interrupts = <51>;
+				dmacap,memcpy;
+				dmacap,xor;
+			};
+			xor11 {
+				interrupts = <52>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
+			};
+		};
+
+		xor@d00f0900 {
+			compatible = "marvell,orion-xor";
+			reg = <0xd00F0900 0x100
+			       0xd00F0B00 0x100>;
+			clocks = <&gateclk 28>;
+			status = "okay";
+
+			xor00 {
+				interrupts = <94>;
+				dmacap,memcpy;
+				dmacap,xor;
+			};
+			xor01 {
+				interrupts = <95>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
+			};
+		};
 	};
 };

arch/arm/boot/dts/dove.dtsi

@@ -31,6 +31,19 @@ intc: interrupt-controller {
 			reg = <0x20204 0x04>, <0x20214 0x04>;
 		};
 
+		core_clk: core-clocks@d0214 {
+			compatible = "marvell,dove-core-clock";
+			reg = <0xd0214 0x4>;
+			#clock-cells = <1>;
+		};
+
+		gate_clk: clock-gating-control@d0038 {
+			compatible = "marvell,dove-gating-clock";
+			reg = <0xd0038 0x4>;
+			clocks = <&core_clk 0>;
+			#clock-cells = <1>;
+		};
+
 		uart0: serial@12000 {
 			compatible = "ns16550a";
 			reg = <0x12000 0x100>;
@@ -100,6 +113,7 @@ spi0: spi@10600 {
 			cell-index = <0>;
 			interrupts = <6>;
 			reg = <0x10600 0x28>;
+			clocks = <&core_clk 0>;
 			status = "disabled";
 		};
 
@@ -110,6 +124,7 @@ spi1: spi@14600 {
 			cell-index = <1>;
 			interrupts = <5>;
 			reg = <0x14600 0x28>;
+			clocks = <&core_clk 0>;
 			status = "disabled";
 		};
 
@@ -121,6 +136,7 @@ i2c0: i2c@11000 {
 			interrupts = <11>;
 			clock-frequency = <400000>;
 			timeout-ms = <1000>;
+			clocks = <&core_clk 0>;
 			status = "disabled";
 		};
 
@@ -128,6 +144,7 @@ sdio0: sdio@92000 {
 			compatible = "marvell,dove-sdhci";
 			reg = <0x92000 0x100>;
 			interrupts = <35>, <37>;
+			clocks = <&gate_clk 8>;
 			status = "disabled";
 		};
 
@@ -135,6 +152,7 @@ sdio1: sdio@90000 {
 			compatible = "marvell,dove-sdhci";
 			reg = <0x90000 0x100>;
 			interrupts = <36>, <38>;
+			clocks = <&gate_clk 9>;
 			status = "disabled";
 		};
 
@@ -142,6 +160,7 @@ sata0: sata@a0000 {
 			compatible = "marvell,orion-sata";
 			reg = <0xa0000 0x2400>;
 			interrupts = <62>;
+			clocks = <&gate_clk 3>;
 			nr-ports = <1>;
 			status = "disabled";
 		};
@@ -152,7 +171,50 @@ crypto: crypto@30000 {
 			      <0xc8000000 0x800>;
 			reg-names = "regs", "sram";
 			interrupts = <31>;
+			clocks = <&gate_clk 15>;
+			status = "okay";
+		};
+
+		xor0: dma-engine@60800 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60800 0x100
+			       0x60a00 0x100>;
+			clocks = <&gate_clk 23>;
+			status = "okay";
+
+			channel0 {
+				interrupts = <39>;
+				dmacap,memcpy;
+				dmacap,xor;
+			};
+
+			channel1 {
+				interrupts = <40>;
+				dmacap,memset;
+				dmacap,memcpy;
+				dmacap,xor;
+			};
+		};
+
+		xor1: dma-engine@60900 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60900 0x100
+			       0x60b00 0x100>;
+			clocks = <&gate_clk 24>;
 			status = "okay";
+
+			channel0 {
+				interrupts = <42>;
+				dmacap,memcpy;
+				dmacap,xor;
+			};
+
+			channel1 {
+				interrupts = <43>;
+				dmacap,memset;
+				dmacap,memcpy;
+				dmacap,xor;
+			};
 		};
 	};
 };

arch/arm/boot/dts/kirkwood.dtsi

@@ -19,6 +19,12 @@ ocp@f1000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		core_clk: core-clocks@10030 {
+			compatible = "marvell,kirkwood-core-clock";
+			reg = <0x10030 0x4>;
+	        	#clock-cells = <1>;
+		};
+
 		gpio0: gpio@10100 {
 			compatible = "marvell,orion-gpio";
 			#gpio-cells = <2>;
@@ -42,6 +48,7 @@ serial@12000 {
 			reg = <0x12000 0x100>;
 			reg-shift = <2>;
 			interrupts = <33>;
+			clocks = <&gate_clk 7>;
 			/* set clock-frequency in board dts */
 			status = "disabled";
 		};
@@ -51,6 +58,7 @@ serial@12100 {
 			reg = <0x12100 0x100>;
 			reg-shift = <2>;
 			interrupts = <34>;
+			clocks = <&gate_clk 7>;
 			/* set clock-frequency in board dts */
 			status = "disabled";
 		};
@@ -68,19 +76,70 @@ spi@10600 {
 			cell-index = <0>;
 			interrupts = <23>;
 			reg = <0x10600 0x28>;
+			clocks = <&gate_clk 7>;
 			status = "disabled";
 		};
 
+		gate_clk: clock-gating-control@2011c {
+			compatible = "marvell,kirkwood-gating-clock";
+			reg = <0x2011c 0x4>;
+			clocks = <&core_clk 0>;
+			#clock-cells = <1>;
+		};
+
 		wdt@20300 {
 			compatible = "marvell,orion-wdt";
 			reg = <0x20300 0x28>;
+			clocks = <&gate_clk 7>;
+			status = "okay";
+		};
+
+		xor@60800 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60800 0x100
+			       0x60A00 0x100>;
+			status = "okay";
+			clocks = <&gate_clk 8>;
+
+			xor00 {
+			      interrupts = <5>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			};
+			xor01 {
+			      interrupts = <6>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			      dmacap,memset;
+			};
+		};
+
+		xor@60900 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60900 0x100
+			       0xd0B00 0x100>;
 			status = "okay";
+			clocks = <&gate_clk 16>;
+
+			xor00 {
+			      interrupts = <7>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			};
+			xor01 {
+			      interrupts = <8>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			      dmacap,memset;
+			};
 		};
 
 		sata@80000 {
 			compatible = "marvell,orion-sata";
 			reg = <0x80000 0x5000>;
 			interrupts = <21>;
+			clocks = <&gate_clk 14>, <&gate_clk 15>;
+			clock-names = "0", "1";
 			status = "disabled";
 		};
 
@@ -94,6 +153,7 @@ nand@3000000 {
 			reg = <0x3000000 0x400>;
 			chip-delay = <25>;
 			/* set partition map and/or chip-delay in board dts */
+			clocks = <&gate_clk 7>;
 			status = "disabled";
 		};
 
@@ -104,6 +164,7 @@ i2c@11000 {
 			#size-cells = <0>;
 			interrupts = <29>;
 			clock-frequency = <100000>;
+			clocks = <&gate_clk 7>;
 			status = "disabled";
 		};
 
@@ -113,6 +174,7 @@ crypto@30000 {
 			      <0xf5000000 0x800>;
 			reg-names = "regs", "sram";
 			interrupts = <22>;
+			clocks = <&gate_clk 17>;
 			status = "okay";
 		};
 	};

arch/arm/configs/multi_v7_defconfig

@@ -17,8 +17,10 @@ CONFIG_ARM_APPENDED_DTB=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_NET=y
+CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_SATA_HIGHBANK=y
+CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_CALXEDA_XGMAC=y
 CONFIG_SMSC911X=y

arch/arm/configs/mvebu_defconfig

@@ -12,6 +12,9 @@ CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
 CONFIG_MACH_ARMADA_XP=y
 # CONFIG_CACHE_L2X0 is not set
+# CONFIG_SWP_EMULATE is not set
+CONFIG_SMP=y
+# CONFIG_LOCAL_TIMERS is not set
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 # CONFIG_COMPACTION is not set
@@ -19,13 +22,27 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_VFP=y
+CONFIG_NET=y
+CONFIG_INET=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_SATA_MV=y
+CONFIG_NETDEVICES=y
+CONFIG_MVNETA=y
+CONFIG_MARVELL_PHY=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_I2C=y
+CONFIG_I2C_MV64XXX=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_S35390A=y
+CONFIG_DMADEVICES=y
+CONFIG_MV_XOR=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y

arch/arm/include/asm/dma-mapping.h

@@ -111,6 +111,8 @@ static inline void dma_free_noncoherent(struct device *dev, size_t size,
 
 extern int dma_supported(struct device *dev, u64 mask);
 
+extern int arm_dma_set_mask(struct device *dev, u64 dma_mask);
+
 /**
  * arm_dma_alloc - allocate consistent memory for DMA
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices

arch/arm/mach-dove/Kconfig

@@ -17,6 +17,8 @@ config MACH_CM_A510
 
 config MACH_DOVE_DT
 	bool "Marvell Dove Flattened Device Tree"
+	select MVEBU_CLK_CORE
+	select MVEBU_CLK_GATING
 	select USE_OF
 	help
 	  Say 'Y' here if you want your kernel to support the

arch/arm/mach-dove/common.c

@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/clk-provider.h>
+#include <linux/clk/mvebu.h>
 #include <linux/ata_platform.h>
 #include <linux/gpio.h>
 #include <linux/of.h>
@@ -32,6 +33,7 @@
 #include <linux/irq.h>
 #include <plat/time.h>
 #include <linux/platform_data/usb-ehci-orion.h>
+#include <linux/platform_data/dma-mv_xor.h>
 #include <plat/irq.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>
@@ -123,8 +125,8 @@ static void __init dove_clk_init(void)
 	orion_clkdev_add(NULL, "mv_crypto", crypto);
 	orion_clkdev_add(NULL, "dove-ac97", ac97);
 	orion_clkdev_add(NULL, "dove-pdma", pdma);
-	orion_clkdev_add(NULL, "mv_xor_shared.0", xor0);
-	orion_clkdev_add(NULL, "mv_xor_shared.1", xor1);
+	orion_clkdev_add(NULL, MV_XOR_NAME ".0", xor0);
+	orion_clkdev_add(NULL, MV_XOR_NAME ".1", xor1);
 }
 
 /*****************************************************************************
@@ -376,19 +378,44 @@ void dove_restart(char mode, const char *cmd)
 
 #if defined(CONFIG_MACH_DOVE_DT)
 /*
- * Auxdata required until real OF clock provider
+ * There are still devices that doesn't even know about DT,
+ * get clock gates here and add a clock lookup.
  */
-struct of_dev_auxdata dove_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
-	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1014600, "orion_spi.1", NULL),
-	OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
-	OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
-		       NULL),
-	OF_DEV_AUXDATA("marvell,orion-sata", 0xf10a0000, "sata_mv.0", NULL),
-	OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1092000, "sdhci-dove.0", NULL),
-	OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1090000, "sdhci-dove.1", NULL),
-	{},
-};
+static void __init dove_legacy_clk_init(void)
+{
+	struct device_node *np = of_find_compatible_node(NULL, NULL,
+					 "marvell,dove-gating-clock");
+	struct of_phandle_args clkspec;
+
+	clkspec.np = np;
+	clkspec.args_count = 1;
+
+	clkspec.args[0] = CLOCK_GATING_BIT_USB0;
+	orion_clkdev_add(NULL, "orion-ehci.0",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CLOCK_GATING_BIT_USB1;
+	orion_clkdev_add(NULL, "orion-ehci.1",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CLOCK_GATING_BIT_GBE;
+	orion_clkdev_add(NULL, "mv643xx_eth_port.0",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CLOCK_GATING_BIT_PCIE0;
+	orion_clkdev_add("0", "pcie",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CLOCK_GATING_BIT_PCIE1;
+	orion_clkdev_add("1", "pcie",
+			 of_clk_get_from_provider(&clkspec));
+}
+
+static void __init dove_of_clk_init(void)
+{
+	mvebu_clocks_init();
+	dove_legacy_clk_init();
+}
 
 static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
 	.phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
@@ -405,20 +432,17 @@ static void __init dove_dt_init(void)
 	dove_setup_cpu_mbus();
 
 	/* Setup root of clk tree */
-	dove_clk_init();
+	dove_of_clk_init();
 
 	/* Internal devices not ported to DT yet */
 	dove_rtc_init();
-	dove_xor0_init();
-	dove_xor1_init();
 
 	dove_ge00_init(&dove_dt_ge00_data);
 	dove_ehci0_init();
 	dove_ehci1_init();
 	dove_pcie_init(1, 1);
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     dove_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * const dove_dt_board_compat[] = {

arch/arm/mach-kirkwood/Kconfig

@@ -46,6 +46,8 @@ config MACH_GURUPLUG
 
 config ARCH_KIRKWOOD_DT
 	bool "Marvell Kirkwood Flattened Device Tree"
+	select MVEBU_CLK_CORE
+	select MVEBU_CLK_GATING
 	select USE_OF
 	help
 	  Say 'Y' here if you want your kernel to support the

arch/arm/mach-kirkwood/board-dt.c

@@ -14,11 +14,15 @@
 #include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/mvebu.h>
 #include <linux/kexec.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <mach/bridge-regs.h>
+#include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/irq.h>
+#include <plat/common.h>
 #include "common.h"
 
 static struct of_device_id kirkwood_dt_match_table[] __initdata = {
@@ -26,16 +30,50 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = {
 	{ }
 };
 
-struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
-	OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
-		       NULL),
-	OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
-	OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL),
-	OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL),
-	OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1030000, "mv_crypto", NULL),
-	{},
-};
+/*
+ * There are still devices that doesn't know about DT yet.  Get clock
+ * gates here and add a clock lookup alias, so that old platform
+ * devices still work.
+*/
+
+static void __init kirkwood_legacy_clk_init(void)
+{
+
+	struct device_node *np = of_find_compatible_node(
+		NULL, NULL, "marvell,kirkwood-gating-clock");
+
+	struct of_phandle_args clkspec;
+
+	clkspec.np = np;
+	clkspec.args_count = 1;
+
+	clkspec.args[0] = CGC_BIT_GE0;
+	orion_clkdev_add(NULL, "mv643xx_eth_port.0",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CGC_BIT_PEX0;
+	orion_clkdev_add("0", "pcie",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CGC_BIT_USB0;
+	orion_clkdev_add(NULL, "orion-ehci.0",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CGC_BIT_PEX1;
+	orion_clkdev_add("1", "pcie",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CGC_BIT_GE1;
+	orion_clkdev_add(NULL, "mv643xx_eth_port.1",
+			 of_clk_get_from_provider(&clkspec));
+
+}
+
+static void __init kirkwood_of_clk_init(void)
+{
+	mvebu_clocks_init();
+	kirkwood_legacy_clk_init();
+}
 
 static void __init kirkwood_dt_init(void)
 {
@@ -54,11 +92,7 @@ static void __init kirkwood_dt_init(void)
 	kirkwood_l2_init();
 
 	/* Setup root of clk tree */
-	kirkwood_clk_init();
-
-	/* internal devices that every board has */
-	kirkwood_xor0_init();
-	kirkwood_xor1_init();
+	kirkwood_of_clk_init();
 
 #ifdef CONFIG_KEXEC
 	kexec_reinit = kirkwood_enable_pcie;
@@ -94,8 +128,7 @@ static void __init kirkwood_dt_init(void)
 	if (of_machine_is_compatible("keymile,km_kirkwood"))
 		km_kirkwood_init();
 
-	of_platform_populate(NULL, kirkwood_dt_match_table,
-			     kirkwood_auxdata_lookup, NULL);
+	of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
 }
 
 static const char *kirkwood_dt_board_compat[] = {

arch/arm/mach-kirkwood/common.c

@@ -260,8 +260,8 @@ void __init kirkwood_clk_init(void)
 	orion_clkdev_add(NULL, "orion_nand", runit);
 	orion_clkdev_add(NULL, "mvsdio", sdio);
 	orion_clkdev_add(NULL, "mv_crypto", crypto);
-	orion_clkdev_add(NULL, MV_XOR_SHARED_NAME ".0", xor0);
-	orion_clkdev_add(NULL, MV_XOR_SHARED_NAME ".1", xor1);
+	orion_clkdev_add(NULL, MV_XOR_NAME ".0", xor0);
+	orion_clkdev_add(NULL, MV_XOR_NAME ".1", xor1);
 	orion_clkdev_add("0", "pcie", pex0);
 	orion_clkdev_add("1", "pcie", pex1);
 	orion_clkdev_add(NULL, "kirkwood-i2s", audio);

arch/arm/mach-mvebu/Kconfig

@@ -9,6 +9,10 @@ config ARCH_MVEBU
 	select PINCTRL
 	select PLAT_ORION
 	select SPARSE_IRQ
+	select CLKDEV_LOOKUP
+	select MVEBU_CLK_CORE
+	select MVEBU_CLK_CPU
+	select MVEBU_CLK_GATING
 
 if ARCH_MVEBU
 
@@ -17,7 +21,8 @@ menu "Marvell SOC with device tree"
 config MACH_ARMADA_370_XP
 	bool
 	select ARMADA_370_XP_TIMER
-	select CPU_V7
+	select HAVE_SMP
+	select CPU_PJ4B
 
 config MACH_ARMADA_370
 	bool "Marvell Armada 370 boards"

arch/arm/mach-mvebu/Makefile

@@ -2,4 +2,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
 	-I$(srctree)/arch/arm/plat-orion/include
 
 obj-y += system-controller.o
-obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o
+obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o
+obj-$(CONFIG_SMP)                += platsmp.o headsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)        += hotplug.o

arch/arm/mach-mvebu/addr-map.c

@@ -78,7 +78,7 @@ armada_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
 	if (win < 8)
 		offset = (win << 4);
 	else
-		offset = ARMADA_WINDOW_8_PLUS_OFFSET + (win << 3);
+		offset = ARMADA_WINDOW_8_PLUS_OFFSET + ((win - 8) << 3);
 
 	return cfg->bridge_virt_base + offset;
 }
@@ -108,6 +108,9 @@ static int __init armada_setup_cpu_mbus(void)
 
 	addr_map_cfg.bridge_virt_base = mbus_unit_addr_decoding_base;
 
+	if (of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"))
+		addr_map_cfg.hw_io_coherency = 1;
+
 	/*
 	 * Disable, clear and configure windows.
 	 */

arch/arm/mach-mvebu/armada-370-xp.c

@@ -17,11 +17,14 @@
 #include <linux/of_platform.h>
 #include <linux/io.h>
 #include <linux/time-armada-370-xp.h>
+#include <linux/clk/mvebu.h>
+#include <linux/dma-mapping.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include "armada-370-xp.h"
 #include "common.h"
+#include "coherency.h"
 
 static struct map_desc armada_370_xp_io_desc[] __initdata = {
 	{
@@ -37,27 +40,45 @@ void __init armada_370_xp_map_io(void)
 	iotable_init(armada_370_xp_io_desc, ARRAY_SIZE(armada_370_xp_io_desc));
 }
 
+void __init armada_370_xp_timer_and_clk_init(void)
+{
+	mvebu_clocks_init();
+	armada_370_xp_timer_init();
+}
+
+void __init armada_370_xp_init_early(void)
+{
+	/*
+	 * Some Armada 370/XP devices allocate their coherent buffers
+	 * from atomic context. Increase size of atomic coherent pool
+	 * to make sure such the allocations won't fail.
+	 */
+	init_dma_coherent_pool_size(SZ_1M);
+}
+
 struct sys_timer armada_370_xp_timer = {
-	.init		= armada_370_xp_timer_init,
+	.init		= armada_370_xp_timer_and_clk_init,
 };
 
 static void __init armada_370_xp_dt_init(void)
 {
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	coherency_init();
 }
 
-static const char * const armada_370_xp_dt_board_dt_compat[] = {
-	"marvell,a370-db",
-	"marvell,axp-db",
+static const char * const armada_370_xp_dt_compat[] = {
+	"marvell,armada-370-xp",
 	NULL,
 };
 
-DT_MACHINE_START(ARMADA_XP_DT, "Marvell Aramada 370/XP (Device Tree)")
+DT_MACHINE_START(ARMADA_XP_DT, "Marvell Armada 370/XP (Device Tree)")
+	.smp		= smp_ops(armada_xp_smp_ops),
 	.init_machine	= armada_370_xp_dt_init,
 	.map_io		= armada_370_xp_map_io,
+	.init_early	= armada_370_xp_init_early,
 	.init_irq	= armada_370_xp_init_irq,
 	.handle_irq     = armada_370_xp_handle_irq,
 	.timer		= &armada_370_xp_timer,
 	.restart	= mvebu_restart,
-	.dt_compat	= armada_370_xp_dt_board_dt_compat,
+	.dt_compat	= armada_370_xp_dt_compat,
 MACHINE_END

arch/arm/mach-mvebu/armada-370-xp.h

@@ -19,4 +19,11 @@
 #define ARMADA_370_XP_REGS_VIRT_BASE	IOMEM(0xfeb00000)
 #define ARMADA_370_XP_REGS_SIZE		SZ_1M
 
+#ifdef CONFIG_SMP
+#include <linux/cpumask.h>
+
+void armada_mpic_send_doorbell(const struct cpumask *mask, unsigned int irq);
+void armada_xp_mpic_smp_cpu_init(void);
+#endif
+
 #endif /* __MACH_ARMADA_370_XP_H */

arch/arm/mach-mvebu/coherency.c

+/*
+ * Coherency fabric (Aurora) support for Armada 370 and XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The Armada 370 and Armada XP SOCs have a coherency fabric which is
+ * responsible for ensuring hardware coherency between all CPUs and between
+ * CPUs and I/O masters. This file initializes the coherency fabric and
+ * supplies basic routines for configuring and controlling hardware coherency
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <asm/smp_plat.h>
+#include "armada-370-xp.h"
+
+/*
+ * Some functions in this file are called very early during SMP
+ * initialization. At that time the device tree framework is not yet
+ * ready, and it is not possible to get the register address to
+ * ioremap it. That's why the pointer below is given with an initial
+ * value matching its virtual mapping
+ */
+static void __iomem *coherency_base = ARMADA_370_XP_REGS_VIRT_BASE + 0x20200;
+static void __iomem *coherency_cpu_base;
+
+/* Coherency fabric registers */
+#define COHERENCY_FABRIC_CFG_OFFSET		   0x4
+
+#define IO_SYNC_BARRIER_CTL_OFFSET		   0x0
+
+static struct of_device_id of_coherency_table[] = {
+	{.compatible = "marvell,coherency-fabric"},
+	{ /* end of list */ },
+};
+
+#ifdef CONFIG_SMP
+int coherency_get_cpu_count(void)
+{
+	int reg, cnt;
+
+	reg = readl(coherency_base + COHERENCY_FABRIC_CFG_OFFSET);
+	cnt = (reg & 0xF) + 1;
+
+	return cnt;
+}
+#endif
+
+/* Function defined in coherency_ll.S */
+int ll_set_cpu_coherent(void __iomem *base_addr, unsigned int hw_cpu_id);
+
+int set_cpu_coherent(unsigned int hw_cpu_id, int smp_group_id)
+{
+	if (!coherency_base) {
+		pr_warn("Can't make CPU %d cache coherent.\n", hw_cpu_id);
+		pr_warn("Coherency fabric is not initialized\n");
+		return 1;
+	}
+
+	return ll_set_cpu_coherent(coherency_base, hw_cpu_id);
+}
+
+static inline void mvebu_hwcc_sync_io_barrier(void)
+{
+	writel(0x1, coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET);
+	while (readl(coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET) & 0x1);
+}
+
+static dma_addr_t mvebu_hwcc_dma_map_page(struct device *dev, struct page *page,
+				  unsigned long offset, size_t size,
+				  enum dma_data_direction dir,
+				  struct dma_attrs *attrs)
+{
+	if (dir != DMA_TO_DEVICE)
+		mvebu_hwcc_sync_io_barrier();
+	return pfn_to_dma(dev, page_to_pfn(page)) + offset;
+}
+
+
+static void mvebu_hwcc_dma_unmap_page(struct device *dev, dma_addr_t dma_handle,
+			      size_t size, enum dma_data_direction dir,
+			      struct dma_attrs *attrs)
+{
+	if (dir != DMA_TO_DEVICE)
+		mvebu_hwcc_sync_io_barrier();
+}
+
+static void mvebu_hwcc_dma_sync(struct device *dev, dma_addr_t dma_handle,
+			size_t size, enum dma_data_direction dir)
+{
+	if (dir != DMA_TO_DEVICE)
+		mvebu_hwcc_sync_io_barrier();
+}
+
+static struct dma_map_ops mvebu_hwcc_dma_ops = {
+	.alloc			= arm_dma_alloc,
+	.free			= arm_dma_free,
+	.mmap			= arm_dma_mmap,
+	.map_page		= mvebu_hwcc_dma_map_page,
+	.unmap_page		= mvebu_hwcc_dma_unmap_page,
+	.get_sgtable		= arm_dma_get_sgtable,
+	.map_sg			= arm_dma_map_sg,
+	.unmap_sg		= arm_dma_unmap_sg,
+	.sync_single_for_cpu	= mvebu_hwcc_dma_sync,
+	.sync_single_for_device	= mvebu_hwcc_dma_sync,
+	.sync_sg_for_cpu	= arm_dma_sync_sg_for_cpu,
+	.sync_sg_for_device	= arm_dma_sync_sg_for_device,
+	.set_dma_mask		= arm_dma_set_mask,
+};
+
+static int mvebu_hwcc_platform_notifier(struct notifier_block *nb,
+				       unsigned long event, void *__dev)
+{
+	struct device *dev = __dev;
+
+	if (event != BUS_NOTIFY_ADD_DEVICE)
+		return NOTIFY_DONE;
+	set_dma_ops(dev, &mvebu_hwcc_dma_ops);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block mvebu_hwcc_platform_nb = {
+	.notifier_call = mvebu_hwcc_platform_notifier,
+};
+
+int __init coherency_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, of_coherency_table);
+	if (np) {
+		pr_info("Initializing Coherency fabric\n");
+		coherency_base = of_iomap(np, 0);
+		coherency_cpu_base = of_iomap(np, 1);
+		set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
+		bus_register_notifier(&platform_bus_type,
+					&mvebu_hwcc_platform_nb);
+	}
+
+	return 0;
+}

arch/arm/mach-mvebu/coherency.h

+/*
+ * arch/arm/mach-mvebu/include/mach/coherency.h
+ *
+ *
+ * Coherency fabric (Aurora) support for Armada 370 and XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_370_XP_COHERENCY_H
+#define __MACH_370_XP_COHERENCY_H
+
+#ifdef CONFIG_SMP
+int coherency_get_cpu_count(void);
+#endif
+
+int set_cpu_coherent(int cpu_id, int smp_group_id);
+int coherency_init(void);
+
+#endif	/* __MACH_370_XP_COHERENCY_H */

arch/arm/mach-mvebu/coherency_ll.S

+/*
+ * Coherency fabric: low level functions
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file implements the assembly function to add a CPU to the
+ * coherency fabric. This function is called by each of the secondary
+ * CPUs during their early boot in an SMP kernel, this why this
+ * function have to callable from assembly. It can also be called by a
+ * primary CPU from C code during its boot.
+ */
+
+#include <linux/linkage.h>
+#define ARMADA_XP_CFB_CTL_REG_OFFSET 0x0
+#define ARMADA_XP_CFB_CFG_REG_OFFSET 0x4
+
+	.text
+/*
+ * r0: Coherency fabric base register address
+ * r1: HW CPU id
+ */
+ENTRY(ll_set_cpu_coherent)
+	/* Create bit by cpu index */
+	mov	r3, #(1 << 24)
+	lsl	r1, r3, r1
+
+	/* Add CPU to SMP group - Atomic */
+	add	r3, r0, #ARMADA_XP_CFB_CTL_REG_OFFSET
+	ldr	r2, [r3]
+	orr	r2, r2, r1
+	str	r2, [r3]
+
+	/* Enable coherency on CPU - Atomic */
+	add	r3, r0, #ARMADA_XP_CFB_CFG_REG_OFFSET
+	ldr	r2, [r3]
+	orr	r2, r2, r1
+	str	r2, [r3]
+
+	dsb
+
+	mov	r0, #0
+	mov	pc, lr
+ENDPROC(ll_set_cpu_coherent)

arch/arm/mach-mvebu/common.h

@@ -20,4 +20,9 @@ void mvebu_restart(char mode, const char *cmd);
 void armada_370_xp_init_irq(void);
 void armada_370_xp_handle_irq(struct pt_regs *regs);
 
+void armada_xp_cpu_die(unsigned int cpu);
+int armada_370_xp_coherency_init(void);
+int armada_370_xp_pmsu_init(void);
+void armada_xp_secondary_startup(void);
+extern struct smp_operations armada_xp_smp_ops;
 #endif

arch/arm/mach-mvebu/headsmp.S

+/*
+ * SMP support: Entry point for secondary CPUs
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file implements the assembly entry point for secondary CPUs in
+ * an SMP kernel. The only thing we need to do is to add the CPU to
+ * the coherency fabric by writing to 2 registers. Currently the base
+ * register addresses are hard coded due to the early initialisation
+ * problems.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+/*
+ * At this stage the secondary CPUs don't have acces yet to the MMU, so
+ * we have to provide physical addresses
+ */
+#define ARMADA_XP_CFB_BASE	     0xD0020200
+
+	__CPUINIT
+
+/*
+ * Armada XP specific entry point for secondary CPUs.
+ * We add the CPU to the coherency fabric and then jump to secondary
+ * startup
+ */
+ENTRY(armada_xp_secondary_startup)
+
+	/* Read CPU id */
+	mrc     p15, 0, r1, c0, c0, 5
+	and     r1, r1, #0xF
+
+	/* Add CPU to coherency fabric */
+	ldr     r0, =ARMADA_XP_CFB_BASE
+
+	bl	ll_set_cpu_coherent
+	b	secondary_startup
+
+ENDPROC(armada_xp_secondary_startup)

arch/arm/mach-mvebu/hotplug.c

+/*
+ * Symmetric Multi Processing (SMP) support for Armada XP
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <asm/proc-fns.h>
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void __ref armada_xp_cpu_die(unsigned int cpu)
+{
+	cpu_do_idle();
+
+	/* We should never return from idle */
+	panic("mvebu: cpu %d unexpectedly exit from shutdown\n", cpu);
+}

arch/arm/mach-mvebu/irq-armada-370-xp.c

@@ -24,6 +24,7 @@
 #include <linux/irqdomain.h>
 #include <asm/mach/arch.h>
 #include <asm/exception.h>
+#include <asm/smp_plat.h>
 
 /* Interrupt Controller Registers Map */
 #define ARMADA_370_XP_INT_SET_MASK_OFFS		(0x48)
@@ -35,6 +36,12 @@
 
 #define ARMADA_370_XP_CPU_INTACK_OFFS		(0x44)
 
+#define ARMADA_370_XP_SW_TRIG_INT_OFFS           (0x4)
+#define ARMADA_370_XP_IN_DRBEL_MSK_OFFS          (0xc)
+#define ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS        (0x8)
+
+#define ACTIVE_DOORBELLS			(8)
+
 static void __iomem *per_cpu_int_base;
 static void __iomem *main_int_base;
 static struct irq_domain *armada_370_xp_mpic_domain;
@@ -51,11 +58,22 @@ static void armada_370_xp_irq_unmask(struct irq_data *d)
 	       per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
 }
 
+#ifdef CONFIG_SMP
+static int armada_xp_set_affinity(struct irq_data *d,
+				  const struct cpumask *mask_val, bool force)
+{
+	return 0;
+}
+#endif
+
 static struct irq_chip armada_370_xp_irq_chip = {
 	.name		= "armada_370_xp_irq",
 	.irq_mask       = armada_370_xp_irq_mask,
 	.irq_mask_ack   = armada_370_xp_irq_mask,
 	.irq_unmask     = armada_370_xp_irq_unmask,
+#ifdef CONFIG_SMP
+	.irq_set_affinity = armada_xp_set_affinity,
+#endif
 };
 
 static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
@@ -72,6 +90,41 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
 	return 0;
 }
 
+#ifdef CONFIG_SMP
+void armada_mpic_send_doorbell(const struct cpumask *mask, unsigned int irq)
+{
+	int cpu;
+	unsigned long map = 0;
+
+	/* Convert our logical CPU mask into a physical one. */
+	for_each_cpu(cpu, mask)
+		map |= 1 << cpu_logical_map(cpu);
+
+	/*
+	 * Ensure that stores to Normal memory are visible to the
+	 * other CPUs before issuing the IPI.
+	 */
+	dsb();
+
+	/* submit softirq */
+	writel((map << 8) | irq, main_int_base +
+		ARMADA_370_XP_SW_TRIG_INT_OFFS);
+}
+
+void armada_xp_mpic_smp_cpu_init(void)
+{
+	/* Clear pending IPIs */
+	writel(0, per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
+
+	/* Enable first 8 IPIs */
+	writel((1 << ACTIVE_DOORBELLS) - 1, per_cpu_int_base +
+		ARMADA_370_XP_IN_DRBEL_MSK_OFFS);
+
+	/* Unmask IPI interrupt */
+	writel(0, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
+}
+#endif /* CONFIG_SMP */
+
 static struct irq_domain_ops armada_370_xp_mpic_irq_ops = {
 	.map = armada_370_xp_mpic_irq_map,
 	.xlate = irq_domain_xlate_onecell,
@@ -98,6 +151,11 @@ static int __init armada_370_xp_mpic_of_init(struct device_node *node,
 		panic("Unable to add Armada_370_Xp MPIC irq domain (DT)\n");
 
 	irq_set_default_host(armada_370_xp_mpic_domain);
+
+#ifdef CONFIG_SMP
+	armada_xp_mpic_smp_cpu_init();
+#endif
+
 	return 0;
 }
 
@@ -111,14 +169,36 @@ asmlinkage void __exception_irq_entry armada_370_xp_handle_irq(struct pt_regs
 					ARMADA_370_XP_CPU_INTACK_OFFS);
 		irqnr = irqstat & 0x3FF;
 
-		if (irqnr < 1023) {
-			irqnr =
-			    irq_find_mapping(armada_370_xp_mpic_domain, irqnr);
+		if (irqnr > 1022)
+			break;
+
+		if (irqnr >= 8) {
+			irqnr =	irq_find_mapping(armada_370_xp_mpic_domain,
+					irqnr);
 			handle_IRQ(irqnr, regs);
 			continue;
 		}
+#ifdef CONFIG_SMP
+		/* IPI Handling */
+		if (irqnr == 0) {
+			u32 ipimask, ipinr;
+
+			ipimask = readl_relaxed(per_cpu_int_base +
+						ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS)
+				& 0xFF;
+
+			writel(0x0, per_cpu_int_base +
+				ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
+
+			/* Handle all pending doorbells */
+			for (ipinr = 0; ipinr < ACTIVE_DOORBELLS; ipinr++) {
+				if (ipimask & (0x1 << ipinr))
+					handle_IPI(ipinr, regs);
+			}
+			continue;
+		}
+#endif
 
-		break;
 	} while (1);
 }
 

arch/arm/mach-mvebu/platsmp.c

+/*
+ * Symmetric Multi Processing (SMP) support for Armada XP
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The Armada XP SoC has 4 ARMv7 PJ4B CPUs running in full HW coherency
+ * This file implements the routines for preparing the SMP infrastructure
+ * and waking up the secondary CPUs
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+#include "common.h"
+#include "armada-370-xp.h"
+#include "pmsu.h"
+#include "coherency.h"
+
+void __init set_secondary_cpus_clock(void)
+{
+	int thiscpu;
+	unsigned long rate;
+	struct clk *cpu_clk = NULL;
+	struct device_node *np = NULL;
+
+	thiscpu = smp_processor_id();
+	for_each_node_by_type(np, "cpu") {
+		int err;
+		int cpu;
+
+		err = of_property_read_u32(np, "reg", &cpu);
+		if (WARN_ON(err))
+			return;
+
+		if (cpu == thiscpu) {
+			cpu_clk = of_clk_get(np, 0);
+			break;
+		}
+	}
+	if (WARN_ON(IS_ERR(cpu_clk)))
+		return;
+	clk_prepare_enable(cpu_clk);
+	rate = clk_get_rate(cpu_clk);
+
+	/* set all the other CPU clk to the same rate than the boot CPU */
+	for_each_node_by_type(np, "cpu") {
+		int err;
+		int cpu;
+
+		err = of_property_read_u32(np, "reg", &cpu);
+		if (WARN_ON(err))
+			return;
+
+		if (cpu != thiscpu) {
+			cpu_clk = of_clk_get(np, 0);
+			clk_set_rate(cpu_clk, rate);
+		}
+	}
+}
+
+static void __cpuinit armada_xp_secondary_init(unsigned int cpu)
+{
+	armada_xp_mpic_smp_cpu_init();
+}
+
+static int __cpuinit armada_xp_boot_secondary(unsigned int cpu,
+					      struct task_struct *idle)
+{
+	pr_info("Booting CPU %d\n", cpu);
+
+	armada_xp_boot_cpu(cpu, armada_xp_secondary_startup);
+
+	return 0;
+}
+
+static void __init armada_xp_smp_init_cpus(void)
+{
+	unsigned int i, ncores;
+	ncores = coherency_get_cpu_count();
+
+	/* Limit possible CPUs to defconfig */
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %d CPUs physically present. Only %d configured.",
+			ncores, nr_cpu_ids);
+		pr_warn("Clipping CPU count to %d\n", nr_cpu_ids);
+		ncores = nr_cpu_ids;
+	}
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+
+	set_smp_cross_call(armada_mpic_send_doorbell);
+}
+
+void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
+{
+	set_secondary_cpus_clock();
+	flush_cache_all();
+	set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
+}
+
+struct smp_operations armada_xp_smp_ops __initdata = {
+	.smp_init_cpus		= armada_xp_smp_init_cpus,
+	.smp_prepare_cpus	= armada_xp_smp_prepare_cpus,
+	.smp_secondary_init	= armada_xp_secondary_init,
+	.smp_boot_secondary	= armada_xp_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= armada_xp_cpu_die,
+#endif
+};

arch/arm/mach-mvebu/pmsu.c

+/*
+ * Power Management Service Unit(PMSU) support for Armada 370/XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The Armada 370 and Armada XP SOCs have a power management service
+ * unit which is responsible for powering down and waking up CPUs and
+ * other SOC units
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <asm/smp_plat.h>
+
+static void __iomem *pmsu_mp_base;
+static void __iomem *pmsu_reset_base;
+
+#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu)	((cpu * 0x100) + 0x24)
+#define PMSU_RESET_CTL_OFFSET(cpu)		(cpu * 0x8)
+
+static struct of_device_id of_pmsu_table[] = {
+	{.compatible = "marvell,armada-370-xp-pmsu"},
+	{ /* end of list */ },
+};
+
+#ifdef CONFIG_SMP
+int armada_xp_boot_cpu(unsigned int cpu_id, void *boot_addr)
+{
+	int reg, hw_cpu;
+
+	if (!pmsu_mp_base || !pmsu_reset_base) {
+		pr_warn("Can't boot CPU. PMSU is uninitialized\n");
+		return 1;
+	}
+
+	hw_cpu = cpu_logical_map(cpu_id);
+
+	writel(virt_to_phys(boot_addr), pmsu_mp_base +
+			PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu));
+
+	/* Release CPU from reset by clearing reset bit*/
+	reg = readl(pmsu_reset_base + PMSU_RESET_CTL_OFFSET(hw_cpu));
+	reg &= (~0x1);
+	writel(reg, pmsu_reset_base + PMSU_RESET_CTL_OFFSET(hw_cpu));
+
+	return 0;
+}
+#endif
+
+int __init armada_370_xp_pmsu_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, of_pmsu_table);
+	if (np) {
+		pr_info("Initializing Power Management Service Unit\n");
+		pmsu_mp_base = of_iomap(np, 0);
+		pmsu_reset_base = of_iomap(np, 1);
+	}
+
+	return 0;
+}
+
+early_initcall(armada_370_xp_pmsu_init);

arch/arm/mach-mvebu/pmsu.h

+/*
+ * Power Management Service Unit (PMSU) support for Armada 370/XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MVEBU_PMSU_H
+#define __MACH_MVEBU_PMSU_H
+
+int armada_xp_boot_cpu(unsigned int cpu_id, void *phys_addr);
+
+#endif	/* __MACH_370_XP_PMSU_H */

arch/arm/mm/Kconfig

@@ -352,6 +352,10 @@ config CPU_PJ4
 	select ARM_THUMBEE
 	select CPU_V7
 
+config CPU_PJ4B
+	bool
+	select CPU_V7
+
 # ARMv6
 config CPU_V6
 	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX

arch/arm/mm/dma-mapping.c

@@ -124,8 +124,6 @@ static void arm_dma_sync_single_for_device(struct device *dev,
 	__dma_page_cpu_to_dev(page, offset, size, dir);
 }
 
-static int arm_dma_set_mask(struct device *dev, u64 dma_mask);
-
 struct dma_map_ops arm_dma_ops = {
 	.alloc			= arm_dma_alloc,
 	.free			= arm_dma_free,
@@ -971,7 +969,7 @@ int dma_supported(struct device *dev, u64 mask)
 }
 EXPORT_SYMBOL(dma_supported);
 
-static int arm_dma_set_mask(struct device *dev, u64 dma_mask)
+int arm_dma_set_mask(struct device *dev, u64 dma_mask)
 {
 	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
 		return -EIO;

arch/arm/mm/proc-v7.S

@@ -169,6 +169,63 @@ __v7_ca15mp_setup:
 	orreq	r0, r0, r10			@ Enable CPU-specific SMP bits
 	mcreq	p15, 0, r0, c1, c0, 1
 #endif
+
+__v7_pj4b_setup:
+#ifdef CONFIG_CPU_PJ4B
+
+/* Auxiliary Debug Modes Control 1 Register */
+#define PJ4B_STATIC_BP (1 << 2) /* Enable Static BP */
+#define PJ4B_INTER_PARITY (1 << 8) /* Disable Internal Parity Handling */
+#define PJ4B_BCK_OFF_STREX (1 << 5) /* Enable the back off of STREX instr */
+#define PJ4B_CLEAN_LINE (1 << 16) /* Disable data transfer for clean line */
+
+/* Auxiliary Debug Modes Control 2 Register */
+#define PJ4B_FAST_LDR (1 << 23) /* Disable fast LDR */
+#define PJ4B_SNOOP_DATA (1 << 25) /* Do not interleave write and snoop data */
+#define PJ4B_CWF (1 << 27) /* Disable Critical Word First feature */
+#define PJ4B_OUTSDNG_NC (1 << 29) /* Disable outstanding non cacheable rqst */
+#define PJ4B_L1_REP_RR (1 << 30) /* L1 replacement - Strict round robin */
+#define PJ4B_AUX_DBG_CTRL2 (PJ4B_SNOOP_DATA | PJ4B_CWF |\
+			    PJ4B_OUTSDNG_NC | PJ4B_L1_REP_RR)
+
+/* Auxiliary Functional Modes Control Register 0 */
+#define PJ4B_SMP_CFB (1 << 1) /* Set SMP mode. Join the coherency fabric */
+#define PJ4B_L1_PAR_CHK (1 << 2) /* Support L1 parity checking */
+#define PJ4B_BROADCAST_CACHE (1 << 8) /* Broadcast Cache and TLB maintenance */
+
+/* Auxiliary Debug Modes Control 0 Register */
+#define PJ4B_WFI_WFE (1 << 22) /* WFI/WFE - serve the DVM and back to idle */
+
+	/* Auxiliary Debug Modes Control 1 Register */
+	mrc	p15, 1,	r0, c15, c1, 1
+	orr     r0, r0, #PJ4B_CLEAN_LINE
+	orr     r0, r0, #PJ4B_BCK_OFF_STREX
+	orr     r0, r0, #PJ4B_INTER_PARITY
+	bic	r0, r0, #PJ4B_STATIC_BP
+	mcr	p15, 1,	r0, c15, c1, 1
+
+	/* Auxiliary Debug Modes Control 2 Register */
+	mrc	p15, 1,	r0, c15, c1, 2
+	bic	r0, r0, #PJ4B_FAST_LDR
+	orr	r0, r0, #PJ4B_AUX_DBG_CTRL2
+	mcr	p15, 1,	r0, c15, c1, 2
+
+	/* Auxiliary Functional Modes Control Register 0 */
+	mrc	p15, 1,	r0, c15, c2, 0
+#ifdef CONFIG_SMP
+	orr	r0, r0, #PJ4B_SMP_CFB
+#endif
+	orr	r0, r0, #PJ4B_L1_PAR_CHK
+	orr	r0, r0, #PJ4B_BROADCAST_CACHE
+	mcr	p15, 1,	r0, c15, c2, 0
+
+	/* Auxiliary Debug Modes Control 0 Register */
+	mrc	p15, 1,	r0, c15, c1, 0
+	orr	r0, r0, #PJ4B_WFI_WFE
+	mcr	p15, 1,	r0, c15, c1, 0
+
+#endif /* CONFIG_CPU_PJ4B */
+
 __v7_setup:
 	adr	r12, __v7_setup_stack		@ the local stack
 	stmia	r12, {r0-r5, r7, r9, r11, lr}
@@ -342,6 +399,16 @@ __v7_ca9mp_proc_info:
 	.long	0xff0ffff0
 	__v7_proc __v7_ca9mp_setup
 	.size	__v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
+
+	/*
+	 * Marvell PJ4B processor.
+	 */
+	.type   __v7_pj4b_proc_info, #object
+__v7_pj4b_proc_info:
+	.long	0x562f5840
+	.long	0xfffffff0
+	__v7_proc __v7_pj4b_setup
+	.size	__v7_pj4b_proc_info, . - __v7_pj4b_proc_info
 #endif	/* CONFIG_ARM_LPAE */
 
 	/*

arch/arm/plat-orion/addr-map.c

@@ -42,6 +42,8 @@ EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
 #define WIN_REMAP_LO_OFF	0x0008
 #define WIN_REMAP_HI_OFF	0x000c
 
+#define ATTR_HW_COHERENCY	(0x1 << 4)
+
 /*
  * Default implementation
  */
@@ -163,6 +165,8 @@ void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
 			w = &orion_mbus_dram_info.cs[cs++];
 			w->cs_index = i;
 			w->mbus_attr = 0xf & ~(1 << i);
+			if (cfg->hw_io_coherency)
+				w->mbus_attr |= ATTR_HW_COHERENCY;
 			w->base = base & 0xffff0000;
 			w->size = (size | 0x0000ffff) + 1;
 		}

arch/arm/plat-orion/common.c

@@ -606,26 +606,6 @@ void __init orion_wdt_init(void)
  ****************************************************************************/
 static u64 orion_xor_dmamask = DMA_BIT_MASK(32);
 
-void __init orion_xor_init_channels(
-	struct mv_xor_platform_data *orion_xor0_data,
-	struct platform_device *orion_xor0_channel,
-	struct mv_xor_platform_data *orion_xor1_data,
-	struct platform_device *orion_xor1_channel)
-{
-	/*
-	 * two engines can't do memset simultaneously, this limitation
-	 * satisfied by removing memset support from one of the engines.
-	 */
-	dma_cap_set(DMA_MEMCPY, orion_xor0_data->cap_mask);
-	dma_cap_set(DMA_XOR, orion_xor0_data->cap_mask);
-	platform_device_register(orion_xor0_channel);
-
-	dma_cap_set(DMA_MEMCPY, orion_xor1_data->cap_mask);
-	dma_cap_set(DMA_MEMSET, orion_xor1_data->cap_mask);
-	dma_cap_set(DMA_XOR, orion_xor1_data->cap_mask);
-	platform_device_register(orion_xor1_channel);
-}
-
 /*****************************************************************************
  * XOR0
  ****************************************************************************/
@@ -636,61 +616,30 @@ static struct resource orion_xor0_shared_resources[] = {
 	}, {
 		.name	= "xor 0 high",
 		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device orion_xor0_shared = {
-	.name		= MV_XOR_SHARED_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(orion_xor0_shared_resources),
-	.resource	= orion_xor0_shared_resources,
-};
-
-static struct resource orion_xor00_resources[] = {
-	[0] = {
+	}, {
+		.name   = "irq channel 0",
 		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct mv_xor_platform_data orion_xor00_data = {
-	.shared		= &orion_xor0_shared,
-	.hw_id		= 0,
-	.pool_size	= PAGE_SIZE,
-};
-
-static struct platform_device orion_xor00_channel = {
-	.name		= MV_XOR_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(orion_xor00_resources),
-	.resource	= orion_xor00_resources,
-	.dev		= {
-		.dma_mask		= &orion_xor_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= &orion_xor00_data,
-	},
-};
-
-static struct resource orion_xor01_resources[] = {
-	[0] = {
+	}, {
+		.name   = "irq channel 1",
 		.flags  = IORESOURCE_IRQ,
 	},
 };
 
-static struct mv_xor_platform_data orion_xor01_data = {
-	.shared		= &orion_xor0_shared,
-	.hw_id		= 1,
-	.pool_size	= PAGE_SIZE,
+static struct mv_xor_channel_data orion_xor0_channels_data[2];
+
+static struct mv_xor_platform_data orion_xor0_pdata = {
+	.channels = orion_xor0_channels_data,
 };
 
-static struct platform_device orion_xor01_channel = {
+static struct platform_device orion_xor0_shared = {
 	.name		= MV_XOR_NAME,
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(orion_xor01_resources),
-	.resource	= orion_xor01_resources,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(orion_xor0_shared_resources),
+	.resource	= orion_xor0_shared_resources,
 	.dev            = {
 		.dma_mask               = &orion_xor_dmamask,
 		.coherent_dma_mask      = DMA_BIT_MASK(64),
-		.platform_data		= &orion_xor01_data,
+		.platform_data          = &orion_xor0_pdata,
 	},
 };
 
@@ -704,15 +653,23 @@ void __init orion_xor0_init(unsigned long mapbase_low,
 	orion_xor0_shared_resources[1].start = mapbase_high;
 	orion_xor0_shared_resources[1].end = mapbase_high + 0xff;
 
-	orion_xor00_resources[0].start = irq_0;
-	orion_xor00_resources[0].end = irq_0;
-	orion_xor01_resources[0].start = irq_1;
-	orion_xor01_resources[0].end = irq_1;
+	orion_xor0_shared_resources[2].start = irq_0;
+	orion_xor0_shared_resources[2].end = irq_0;
+	orion_xor0_shared_resources[3].start = irq_1;
+	orion_xor0_shared_resources[3].end = irq_1;
 
-	platform_device_register(&orion_xor0_shared);
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, orion_xor0_channels_data[0].cap_mask);
+	dma_cap_set(DMA_XOR, orion_xor0_channels_data[0].cap_mask);
+
+	dma_cap_set(DMA_MEMSET, orion_xor0_channels_data[1].cap_mask);
+	dma_cap_set(DMA_MEMCPY, orion_xor0_channels_data[1].cap_mask);
+	dma_cap_set(DMA_XOR, orion_xor0_channels_data[1].cap_mask);
 
-	orion_xor_init_channels(&orion_xor00_data, &orion_xor00_channel,
-				&orion_xor01_data, &orion_xor01_channel);
+	platform_device_register(&orion_xor0_shared);
 }
 
 /*****************************************************************************
@@ -725,61 +682,30 @@ static struct resource orion_xor1_shared_resources[] = {
 	}, {
 		.name	= "xor 1 high",
 		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device orion_xor1_shared = {
-	.name		= MV_XOR_SHARED_NAME,
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(orion_xor1_shared_resources),
-	.resource	= orion_xor1_shared_resources,
-};
-
-static struct resource orion_xor10_resources[] = {
-	[0] = {
+	}, {
+		.name   = "irq channel 0",
 		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct mv_xor_platform_data orion_xor10_data = {
-	.shared		= &orion_xor1_shared,
-	.hw_id		= 0,
-	.pool_size	= PAGE_SIZE,
-};
-
-static struct platform_device orion_xor10_channel = {
-	.name		= MV_XOR_NAME,
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(orion_xor10_resources),
-	.resource	= orion_xor10_resources,
-	.dev		= {
-		.dma_mask		= &orion_xor_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= &orion_xor10_data,
-	},
-};
-
-static struct resource orion_xor11_resources[] = {
-	[0] = {
+	}, {
+		.name   = "irq channel 1",
 		.flags  = IORESOURCE_IRQ,
 	},
 };
 
-static struct mv_xor_platform_data orion_xor11_data = {
-	.shared		= &orion_xor1_shared,
-	.hw_id		= 1,
-	.pool_size	= PAGE_SIZE,
+static struct mv_xor_channel_data orion_xor1_channels_data[2];
+
+static struct mv_xor_platform_data orion_xor1_pdata = {
+	.channels = orion_xor1_channels_data,
 };
 
-static struct platform_device orion_xor11_channel = {
+static struct platform_device orion_xor1_shared = {
 	.name		= MV_XOR_NAME,
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(orion_xor11_resources),
-	.resource	= orion_xor11_resources,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(orion_xor1_shared_resources),
+	.resource	= orion_xor1_shared_resources,
 	.dev            = {
 		.dma_mask               = &orion_xor_dmamask,
 		.coherent_dma_mask      = DMA_BIT_MASK(64),
-		.platform_data		= &orion_xor11_data,
+		.platform_data          = &orion_xor1_pdata,
 	},
 };
 
@@ -793,15 +719,23 @@ void __init orion_xor1_init(unsigned long mapbase_low,
 	orion_xor1_shared_resources[1].start = mapbase_high;
 	orion_xor1_shared_resources[1].end = mapbase_high + 0xff;
 
-	orion_xor10_resources[0].start = irq_0;
-	orion_xor10_resources[0].end = irq_0;
-	orion_xor11_resources[0].start = irq_1;
-	orion_xor11_resources[0].end = irq_1;
+	orion_xor1_shared_resources[2].start = irq_0;
+	orion_xor1_shared_resources[2].end = irq_0;
+	orion_xor1_shared_resources[3].start = irq_1;
+	orion_xor1_shared_resources[3].end = irq_1;
 
-	platform_device_register(&orion_xor1_shared);
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, orion_xor1_channels_data[0].cap_mask);
+	dma_cap_set(DMA_XOR, orion_xor1_channels_data[0].cap_mask);
 
-	orion_xor_init_channels(&orion_xor10_data, &orion_xor10_channel,
-				&orion_xor11_data, &orion_xor11_channel);
+	dma_cap_set(DMA_MEMSET, orion_xor1_channels_data[1].cap_mask);
+	dma_cap_set(DMA_MEMCPY, orion_xor1_channels_data[1].cap_mask);
+	dma_cap_set(DMA_XOR, orion_xor1_channels_data[1].cap_mask);
+
+	platform_device_register(&orion_xor1_shared);
 }
 
 /*****************************************************************************

arch/arm/plat-orion/include/plat/addr-map.h

@@ -17,6 +17,7 @@ struct orion_addr_map_cfg {
 	const int num_wins;	/* Total number of windows */
 	const int remappable_wins;
 	void __iomem *bridge_virt_base;
+	int hw_io_coherency;
 
 	/* If NULL, the default cpu_win_can_remap will be used, using
 	   the value in remappable_wins */

arch/arm/plat-orion/include/plat/common.h

@@ -12,6 +12,7 @@
 #include <linux/mv643xx_eth.h>
 
 struct dsa_platform_data;
+struct mv_sata_platform_data;
 
 void __init orion_uart0_init(void __iomem *membase,
 			     resource_size_t mapbase,

drivers/clk/Kconfig

@@ -54,3 +54,5 @@ config COMMON_CLK_MAX77686
 	  This driver supports Maxim 77686 crystal oscillator clock. 
 
 endmenu
+
+source "drivers/clk/mvebu/Kconfig"

drivers/clk/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_PLAT_SPEAR)	+= spear/
 obj-$(CONFIG_ARCH_U300)		+= clk-u300.o
 obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/
 obj-$(CONFIG_ARCH_PRIMA2)	+= clk-prima2.o
+obj-$(CONFIG_PLAT_ORION)	+= mvebu/
 ifeq ($(CONFIG_COMMON_CLK), y)
 obj-$(CONFIG_ARCH_MMP)		+= mmp/
 endif

drivers/clk/mvebu/Kconfig

+config MVEBU_CLK_CORE
+       bool
+
+config MVEBU_CLK_CPU
+       bool
+
+config MVEBU_CLK_GATING
+       bool

drivers/clk/mvebu/Makefile

+obj-$(CONFIG_MVEBU_CLK_CORE) 	+= clk.o clk-core.o
+obj-$(CONFIG_MVEBU_CLK_CPU) 	+= clk-cpu.o
+obj-$(CONFIG_MVEBU_CLK_GATING) 	+= clk-gating-ctrl.o

drivers/clk/mvebu/clk-core.h

+/*
+ *  * Marvell EBU clock core handling defined at reset
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MVEBU_CLK_CORE_H
+#define __MVEBU_CLK_CORE_H
+
+void __init mvebu_core_clk_init(void);
+
+#endif

drivers/clk/mvebu/clk-cpu.c

+/*
+ * Marvell MVEBU CPU clock handling.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+#include "clk-cpu.h"
+
+#define SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET    0x0
+#define SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET   0xC
+#define SYS_CTRL_CLK_DIVIDER_MASK	    0x3F
+
+#define MAX_CPU	    4
+struct cpu_clk {
+	struct clk_hw hw;
+	int cpu;
+	const char *clk_name;
+	const char *parent_name;
+	void __iomem *reg_base;
+};
+
+static struct clk **clks;
+
+static struct clk_onecell_data clk_data;
+
+#define to_cpu_clk(p) container_of(p, struct cpu_clk, hw)
+
+static unsigned long clk_cpu_recalc_rate(struct clk_hw *hwclk,
+					 unsigned long parent_rate)
+{
+	struct cpu_clk *cpuclk = to_cpu_clk(hwclk);
+	u32 reg, div;
+
+	reg = readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET);
+	div = (reg >> (cpuclk->cpu * 8)) & SYS_CTRL_CLK_DIVIDER_MASK;
+	return parent_rate / div;
+}
+
+static long clk_cpu_round_rate(struct clk_hw *hwclk, unsigned long rate,
+			       unsigned long *parent_rate)
+{
+	/* Valid ratio are 1:1, 1:2 and 1:3 */
+	u32 div;
+
+	div = *parent_rate / rate;
+	if (div == 0)
+		div = 1;
+	else if (div > 3)
+		div = 3;
+
+	return *parent_rate / div;
+}
+
+static int clk_cpu_set_rate(struct clk_hw *hwclk, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct cpu_clk *cpuclk = to_cpu_clk(hwclk);
+	u32 reg, div;
+	u32 reload_mask;
+
+	div = parent_rate / rate;
+	reg = (readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET)
+		& (~(SYS_CTRL_CLK_DIVIDER_MASK << (cpuclk->cpu * 8))))
+		| (div << (cpuclk->cpu * 8));
+	writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET);
+	/* Set clock divider reload smooth bit mask */
+	reload_mask = 1 << (20 + cpuclk->cpu);
+
+	reg = readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET)
+	    | reload_mask;
+	writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET);
+
+	/* Now trigger the clock update */
+	reg = readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET)
+	    | 1 << 24;
+	writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET);
+
+	/* Wait for clocks to settle down then clear reload request */
+	udelay(1000);
+	reg &= ~(reload_mask | 1 << 24);
+	writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET);
+	udelay(1000);
+
+	return 0;
+}
+
+static const struct clk_ops cpu_ops = {
+	.recalc_rate = clk_cpu_recalc_rate,
+	.round_rate = clk_cpu_round_rate,
+	.set_rate = clk_cpu_set_rate,
+};
+
+void __init of_cpu_clk_setup(struct device_node *node)
+{
+	struct cpu_clk *cpuclk;
+	void __iomem *clock_complex_base = of_iomap(node, 0);
+	int ncpus = 0;
+	struct device_node *dn;
+
+	if (clock_complex_base == NULL) {
+		pr_err("%s: clock-complex base register not set\n",
+			__func__);
+		return;
+	}
+
+	for_each_node_by_type(dn, "cpu")
+		ncpus++;
+
+	cpuclk = kzalloc(ncpus * sizeof(*cpuclk), GFP_KERNEL);
+	if (WARN_ON(!cpuclk))
+		return;
+
+	clks = kzalloc(ncpus * sizeof(*clks), GFP_KERNEL);
+	if (WARN_ON(!clks))
+		return;
+
+	for_each_node_by_type(dn, "cpu") {
+		struct clk_init_data init;
+		struct clk *clk;
+		struct clk *parent_clk;
+		char *clk_name = kzalloc(5, GFP_KERNEL);
+		int cpu, err;
+
+		if (WARN_ON(!clk_name))
+			return;
+
+		err = of_property_read_u32(dn, "reg", &cpu);
+		if (WARN_ON(err))
+			return;
+
+		sprintf(clk_name, "cpu%d", cpu);
+		parent_clk = of_clk_get(node, 0);
+
+		cpuclk[cpu].parent_name = __clk_get_name(parent_clk);
+		cpuclk[cpu].clk_name = clk_name;
+		cpuclk[cpu].cpu = cpu;
+		cpuclk[cpu].reg_base = clock_complex_base;
+		cpuclk[cpu].hw.init = &init;
+
+		init.name = cpuclk[cpu].clk_name;
+		init.ops = &cpu_ops;
+		init.flags = 0;
+		init.parent_names = &cpuclk[cpu].parent_name;
+		init.num_parents = 1;
+
+		clk = clk_register(NULL, &cpuclk[cpu].hw);
+		if (WARN_ON(IS_ERR(clk)))
+			goto bail_out;
+		clks[cpu] = clk;
+	}
+	clk_data.clk_num = MAX_CPU;
+	clk_data.clks = clks;
+	of_clk_add_provider(node, of_clk_src_onecell_get, &clk_data);
+
+	return;
+bail_out:
+	kfree(clks);
+	kfree(cpuclk);
+}
+
+static const __initconst struct of_device_id clk_cpu_match[] = {
+	{
+		.compatible = "marvell,armada-xp-cpu-clock",
+		.data = of_cpu_clk_setup,
+	},
+	{
+		/* sentinel */
+	},
+};
+
+void __init mvebu_cpu_clk_init(void)
+{
+	of_clk_init(clk_cpu_match);
+}

drivers/clk/mvebu/clk-cpu.h

+/*
+ * Marvell MVEBU CPU clock handling.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MVEBU_CLK_CPU_H
+#define __MVEBU_CLK_CPU_H
+
+#ifdef CONFIG_MVEBU_CLK_CPU
+void __init mvebu_cpu_clk_init(void);
+#else
+static inline void mvebu_cpu_clk_init(void) {}
+#endif
+
+#endif

drivers/clk/mvebu/clk-gating-ctrl.c

+/*
+ * Marvell MVEBU clock gating control.
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/mvebu.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+struct mvebu_gating_ctrl {
+	spinlock_t lock;
+	struct clk **gates;
+	int num_gates;
+};
+
+struct mvebu_soc_descr {
+	const char *name;
+	const char *parent;
+	int bit_idx;
+};
+
+#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+
+static struct clk __init *mvebu_clk_gating_get_src(
+	struct of_phandle_args *clkspec, void *data)
+{
+	struct mvebu_gating_ctrl *ctrl = (struct mvebu_gating_ctrl *)data;
+	int n;
+
+	if (clkspec->args_count < 1)
+		return ERR_PTR(-EINVAL);
+
+	for (n = 0; n < ctrl->num_gates; n++) {
+		struct clk_gate *gate =
+			to_clk_gate(__clk_get_hw(ctrl->gates[n]));
+		if (clkspec->args[0] == gate->bit_idx)
+			return ctrl->gates[n];
+	}
+	return ERR_PTR(-ENODEV);
+}
+
+static void __init mvebu_clk_gating_setup(
+	struct device_node *np, const struct mvebu_soc_descr *descr)
+{
+	struct mvebu_gating_ctrl *ctrl;
+	struct clk *clk;
+	void __iomem *base;
+	const char *default_parent = NULL;
+	int n;
+
+	base = of_iomap(np, 0);
+
+	clk = of_clk_get(np, 0);
+	if (!IS_ERR(clk)) {
+		default_parent = __clk_get_name(clk);
+		clk_put(clk);
+	}
+
+	ctrl = kzalloc(sizeof(struct mvebu_gating_ctrl), GFP_KERNEL);
+	if (WARN_ON(!ctrl))
+		return;
+
+	spin_lock_init(&ctrl->lock);
+
+	/*
+	 * Count, allocate, and register clock gates
+	 */
+	for (n = 0; descr[n].name;)
+		n++;
+
+	ctrl->num_gates = n;
+	ctrl->gates = kzalloc(ctrl->num_gates * sizeof(struct clk *),
+			      GFP_KERNEL);
+	if (WARN_ON(!ctrl->gates)) {
+		kfree(ctrl);
+		return;
+	}
+
+	for (n = 0; n < ctrl->num_gates; n++) {
+		u8 flags = 0;
+		const char *parent =
+			(descr[n].parent) ? descr[n].parent : default_parent;
+
+		/*
+		 * On Armada 370, the DDR clock is a special case: it
+		 * isn't taken by any driver, but should anyway be
+		 * kept enabled, so we mark it as IGNORE_UNUSED for
+		 * now.
+		 */
+		if (!strcmp(descr[n].name, "ddr"))
+			flags |= CLK_IGNORE_UNUSED;
+
+		ctrl->gates[n] = clk_register_gate(NULL, descr[n].name, parent,
+				   flags, base, descr[n].bit_idx, 0, &ctrl->lock);
+		WARN_ON(IS_ERR(ctrl->gates[n]));
+	}
+	of_clk_add_provider(np, mvebu_clk_gating_get_src, ctrl);
+}
+
+/*
+ * SoC specific clock gating control
+ */
+
+#ifdef CONFIG_MACH_ARMADA_370
+static const struct mvebu_soc_descr __initconst armada_370_gating_descr[] = {
+	{ "audio", NULL, 0 },
+	{ "pex0_en", NULL, 1 },
+	{ "pex1_en", NULL,  2 },
+	{ "ge1", NULL, 3 },
+	{ "ge0", NULL, 4 },
+	{ "pex0", NULL, 5 },
+	{ "pex1", NULL, 9 },
+	{ "sata0", NULL, 15 },
+	{ "sdio", NULL, 17 },
+	{ "tdm", NULL, 25 },
+	{ "ddr", NULL, 28 },
+	{ "sata1", NULL, 30 },
+	{ }
+};
+#endif
+
+#ifdef CONFIG_MACH_ARMADA_XP
+static const struct mvebu_soc_descr __initconst armada_xp_gating_descr[] = {
+	{ "audio", NULL, 0 },
+	{ "ge3", NULL, 1 },
+	{ "ge2", NULL,  2 },
+	{ "ge1", NULL, 3 },
+	{ "ge0", NULL, 4 },
+	{ "pex0", NULL, 5 },
+	{ "pex1", NULL, 6 },
+	{ "pex2", NULL, 7 },
+	{ "pex3", NULL, 8 },
+	{ "bp", NULL, 13 },
+	{ "sata0lnk", NULL, 14 },
+	{ "sata0", "sata0lnk", 15 },
+	{ "lcd", NULL, 16 },
+	{ "sdio", NULL, 17 },
+	{ "usb0", NULL, 18 },
+	{ "usb1", NULL, 19 },
+	{ "usb2", NULL, 20 },
+	{ "xor0", NULL, 22 },
+	{ "crypto", NULL, 23 },
+	{ "tdm", NULL, 25 },
+	{ "xor1", NULL, 28 },
+	{ "sata1lnk", NULL, 29 },
+	{ "sata1", "sata1lnk", 30 },
+	{ }
+};
+#endif
+
+#ifdef CONFIG_ARCH_DOVE
+static const struct mvebu_soc_descr __initconst dove_gating_descr[] = {
+	{ "usb0", NULL, 0 },
+	{ "usb1", NULL, 1 },
+	{ "ge", "gephy", 2 },
+	{ "sata", NULL, 3 },
+	{ "pex0", NULL, 4 },
+	{ "pex1", NULL, 5 },
+	{ "sdio0", NULL, 8 },
+	{ "sdio1", NULL, 9 },
+	{ "nand", NULL, 10 },
+	{ "camera", NULL, 11 },
+	{ "i2s0", NULL, 12 },
+	{ "i2s1", NULL, 13 },
+	{ "crypto", NULL, 15 },
+	{ "ac97", NULL, 21 },
+	{ "pdma", NULL, 22 },
+	{ "xor0", NULL, 23 },
+	{ "xor1", NULL, 24 },
+	{ "gephy", NULL, 30 },
+	{ }
+};
+#endif
+
+#ifdef CONFIG_ARCH_KIRKWOOD
+static const struct mvebu_soc_descr __initconst kirkwood_gating_descr[] = {
+	{ "ge0", NULL, 0 },
+	{ "pex0", NULL, 2 },
+	{ "usb0", NULL, 3 },
+	{ "sdio", NULL, 4 },
+	{ "tsu", NULL, 5 },
+	{ "runit", NULL, 7 },
+	{ "xor0", NULL, 8 },
+	{ "audio", NULL, 9 },
+	{ "sata0", NULL, 14 },
+	{ "sata1", NULL, 15 },
+	{ "xor1", NULL, 16 },
+	{ "crypto", NULL, 17 },
+	{ "pex1", NULL, 18 },
+	{ "ge1", NULL, 19 },
+	{ "tdm", NULL, 20 },
+	{ }
+};
+#endif
+
+static const __initdata struct of_device_id clk_gating_match[] = {
+#ifdef CONFIG_MACH_ARMADA_370
+	{
+		.compatible = "marvell,armada-370-gating-clock",
+		.data = armada_370_gating_descr,
+	},
+#endif
+
+#ifdef CONFIG_MACH_ARMADA_XP
+	{
+		.compatible = "marvell,armada-xp-gating-clock",
+		.data = armada_xp_gating_descr,
+	},
+#endif
+
+#ifdef CONFIG_ARCH_DOVE
+	{
+		.compatible = "marvell,dove-gating-clock",
+		.data = dove_gating_descr,
+	},
+#endif
+
+#ifdef CONFIG_ARCH_KIRKWOOD
+	{
+		.compatible = "marvell,kirkwood-gating-clock",
+		.data = kirkwood_gating_descr,
+	},
+#endif
+
+	{ }
+};
+
+void __init mvebu_gating_clk_init(void)
+{
+	struct device_node *np;
+
+	for_each_matching_node(np, clk_gating_match) {
+		const struct of_device_id *match =
+			of_match_node(clk_gating_match, np);
+		mvebu_clk_gating_setup(np,
+		       (const struct mvebu_soc_descr *)match->data);
+	}
+}

drivers/clk/mvebu/clk-gating-ctrl.h

+/*
+ * Marvell EBU gating clock handling
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MVEBU_CLK_GATING_H
+#define __MVEBU_CLK_GATING_H
+
+#ifdef CONFIG_MVEBU_CLK_GATING
+void __init mvebu_gating_clk_init(void);
+#else
+void mvebu_gating_clk_init(void) {}
+#endif
+
+#endif

drivers/clk/mvebu/clk.c

+/*
+ * Marvell EBU SoC clock handling.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/clk/mvebu.h>
+#include <linux/of.h>
+#include "clk-core.h"
+#include "clk-cpu.h"
+#include "clk-gating-ctrl.h"
+
+void __init mvebu_clocks_init(void)
+{
+	mvebu_core_clk_init();
+	mvebu_gating_clk_init();
+	mvebu_cpu_clk_init();
+}

drivers/clocksource/time-armada-370-xp.c

@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/kernel.h>
+#include <linux/clk.h>
 #include <linux/timer.h>
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
@@ -167,7 +168,6 @@ void __init armada_370_xp_timer_init(void)
 	u32 u;
 	struct device_node *np;
 	unsigned int timer_clk;
-	int ret;
 	np = of_find_compatible_node(NULL, NULL, "marvell,armada-370-xp-timer");
 	timer_base = of_iomap(np, 0);
 	WARN_ON(!timer_base);
@@ -179,13 +179,14 @@ void __init armada_370_xp_timer_init(void)
 		       timer_base + TIMER_CTRL_OFF);
 		timer_clk = 25000000;
 	} else {
-		u32 clk = 0;
-		ret = of_property_read_u32(np, "clock-frequency", &clk);
-		WARN_ON(!clk || ret < 0);
+		unsigned long rate = 0;
+		struct clk *clk = of_clk_get(np, 0);
+		WARN_ON(IS_ERR(clk));
+		rate =  clk_get_rate(clk);
 		u = readl(timer_base + TIMER_CTRL_OFF);
 		writel(u & ~(TIMER0_25MHZ | TIMER1_25MHZ),
 		       timer_base + TIMER_CTRL_OFF);
-		timer_clk = clk / TIMER_DIVIDER;
+		timer_clk = rate / TIMER_DIVIDER;
 	}
 
 	/* We use timer 0 as clocksource, and timer 1 for

drivers/dma/mv_xor.h

@@ -24,8 +24,10 @@
 #include <linux/interrupt.h>
 
 #define USE_TIMER
+#define MV_XOR_POOL_SIZE		PAGE_SIZE
 #define MV_XOR_SLOT_SIZE		64
 #define MV_XOR_THRESHOLD		1
+#define MV_XOR_MAX_CHANNELS             2
 
 #define XOR_OPERATION_MODE_XOR		0
 #define XOR_OPERATION_MODE_MEMCPY	2
@@ -51,29 +53,13 @@
 #define WINDOW_SIZE(w)		(0x270 + ((w) << 2))
 #define WINDOW_REMAP_HIGH(w)	(0x290 + ((w) << 2))
 #define WINDOW_BAR_ENABLE(chan)	(0x240 + ((chan) << 2))
+#define WINDOW_OVERRIDE_CTRL(chan)	(0x2A0 + ((chan) << 2))
 
-struct mv_xor_shared_private {
+struct mv_xor_device {
 	void __iomem	     *xor_base;
 	void __iomem	     *xor_high_base;
 	struct clk	     *clk;
-};
-
-
-/**
- * struct mv_xor_device - internal representation of a XOR device
- * @pdev: Platform device
- * @id: HW XOR Device selector
- * @dma_desc_pool: base of DMA descriptor region (DMA address)
- * @dma_desc_pool_virt: base of DMA descriptor region (CPU address)
- * @common: embedded struct dma_device
- */
-struct mv_xor_device {
-	struct platform_device		*pdev;
-	int				id;
-	dma_addr_t			dma_desc_pool;
-	void				*dma_desc_pool_virt;
-	struct dma_device		common;
-	struct mv_xor_shared_private	*shared;
+	struct mv_xor_chan   *channels[MV_XOR_MAX_CHANNELS];
 };
 
 /**
@@ -96,11 +82,15 @@ struct mv_xor_chan {
 	spinlock_t		lock; /* protects the descriptor slot pool */
 	void __iomem		*mmr_base;
 	unsigned int		idx;
+	int                     irq;
 	enum dma_transaction_type	current_type;
 	struct list_head	chain;
 	struct list_head	completed_slots;
-	struct mv_xor_device	*device;
-	struct dma_chan		common;
+	dma_addr_t		dma_desc_pool;
+	void			*dma_desc_pool_virt;
+	size_t                  pool_size;
+	struct dma_device	dmadev;
+	struct dma_chan		dmachan;
 	struct mv_xor_desc_slot	*last_used;
 	struct list_head	all_slots;
 	int			slots_allocated;

drivers/net/ethernet/marvell/Kconfig

@@ -31,6 +31,30 @@ config MV643XX_ETH
 	  Some boards that use the Discovery chipset are the Momenco
 	  Ocelot C and Jaguar ATX and Pegasos II.
 
+config MVMDIO
+	tristate "Marvell MDIO interface support"
+	---help---
+	  This driver supports the MDIO interface found in the network
+	  interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
+	  Dove, Armada 370 and Armada XP).
+
+	  For now, this driver is only needed for the MVNETA driver
+	  (used on Armada 370 and XP), but it could be used in the
+	  future by the MV643XX_ETH driver.
+
+config MVNETA
+	tristate "Marvell Armada 370/XP network interface support"
+	depends on MACH_ARMADA_370_XP
+	select PHYLIB
+	select MVMDIO
+	---help---
+	  This driver supports the network interface units in the
+	  Marvell ARMADA XP and ARMADA 370 SoC family.
+
+	  Note that this driver is distinct from the mv643xx_eth
+	  driver, which should be used for the older Marvell SoCs
+	  (Dove, Orion, Discovery, Kirkwood).
+
 config PXA168_ETH
 	tristate "Marvell pxa168 ethernet support"
 	depends on CPU_PXA168

drivers/net/ethernet/marvell/Makefile

@@ -3,6 +3,8 @@
 #
 
 obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
+obj-$(CONFIG_MVMDIO) += mvmdio.o
+obj-$(CONFIG_MVNETA) += mvneta.o
 obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
 obj-$(CONFIG_SKGE) += skge.o
 obj-$(CONFIG_SKY2) += sky2.o

include/linux/clk/mvebu.h

+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __CLK_MVEBU_H_
+#define __CLK_MVEBU_H_
+
+void __init mvebu_clocks_init(void);
+
+#endif

include/linux/platform_data/dma-mv_xor.h

@@ -10,15 +10,14 @@
 #include <linux/dmaengine.h>
 #include <linux/mbus.h>
 
-#define MV_XOR_SHARED_NAME	"mv_xor_shared"
 #define MV_XOR_NAME	"mv_xor"
 
-struct mv_xor_platform_data {
-	struct platform_device		*shared;
-	int				hw_id;
+struct mv_xor_channel_data {
 	dma_cap_mask_t			cap_mask;
-	size_t				pool_size;
 };
 
+struct mv_xor_platform_data {
+	struct mv_xor_channel_data    *channels;
+};
 
 #endif