Merge tag 'for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset changes from Sebastian Reichel:
 "New chip/feature support:
   - bq27xxx: support updating battery config from DT
   - bq24190: support loading battery charge info from DT
   - LTC2941: add LTC2942/LTC2944 support
   - max17042: add ACPI support
   - max1721x: new driver

  Misc:
   - Move bq27xxx w1 driver from w1 into power-supply subsystem
   - Introduce power_supply_set_input_current_limit_from_supplier
   - constify stuff
   - some minor fixes"

* tag 'for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (39 commits)
  power: supply: bq27xxx: enable writing capacity values for bq27421
  power: supply: bq24190_charger: Get input_current_limit from our supplier
  power: supply: bq24190_charger: Export 5V boost converter as regulator
  power: supply: bq24190_charger: Add power_supply_battery_info support
  power: supply: bq24190_charger: Add property system-minimum-microvolt
  power: supply: bq24190_charger: Enable devicetree config
  dt-bindings: power: supply: Add docs for TI BQ24190 battery charger
  power: supply: bq27xxx: Remove duplicate chip data arrays
  power: supply: bq27xxx: Enable data memory update for certain chips
  power: supply: bq27xxx: Add chip IDs for previously shadowed chips
  power: supply: bq27xxx: Create single chip data table
  power: supply: bq24190_charger: Add ti,bq24192i to devicetree table
  power: supply: bq24190_charger: Add input_current_limit property
  power: supply: Add power_supply_set_input_current_limit_from_supplier helper
  power: supply: max17042_battery: Fix compiler warning
  power: supply: core: Delete two error messages for a failed memory allocation in power_supply_check_supplies()
  power: supply: make device_attribute const
  power: supply: max17042_battery: Fix ACPI interrupt issues
  power: supply: max17042_battery: Add support for ACPI enumeration
  power: supply: lp8788: Make several arrays static const * const
  ...

Documentation/devicetree/bindings/power/supply/bq24190.txt

+TI BQ24190 Li-Ion Battery Charger
+
+Required properties:
+- compatible: contains one of the following:
+    * "ti,bq24190"
+    * "ti,bq24192i"
+- reg: integer, I2C address of the charger.
+- interrupts[-extended]: configuration for charger INT pin.
+
+Optional properties:
+- monitored-battery: phandle of battery characteristics devicetree node
+  The charger uses the following battery properties:
+    + precharge-current-microamp: maximum charge current during precharge
+      phase (typically 20% of battery capacity).
+    + charge-term-current-microamp: a charge cycle terminates when the
+      battery voltage is above recharge threshold, and the current is below
+      this setting (typically 10% of battery capacity).
+  See also Documentation/devicetree/bindings/power/supply/battery.txt
+- ti,system-minimum-microvolt: when power is connected and the battery is below
+  minimum system voltage, the system will be regulated above this setting.
+
+Notes:
+- Some circuit boards wire the chip's "OTG" pin high (enabling 500mA default
+  charge current on USB SDP ports, among other features). To simulate this on
+  boards that wire the pin to a GPIO, set a gpio-hog.
+
+Example:
+
+	bat: battery {
+		compatible = "simple-battery";
+		precharge-current-microamp = <256000>;
+		charge-term-current-microamp = <128000>;
+		// etc.
+	};
+
+	bq24190: charger@6a {
+		compatible = "ti,bq24190";
+		reg = <0x6a>;
+		interrupts-extended = <&gpiochip 10 IRQ_TYPE_EDGE_FALLING>;
+		monitored-battery = <&bat>;
+		ti,system-minimum-microvolt = <3200000>;
+	};
+
+	&twl_gpio {
+		otg {
+			gpio-hog;
+			gpios = <6 0>;
+			output-high;
+			line-name = "otg-gpio";
+		};
+	};

Documentation/devicetree/bindings/power/supply/ltc2941.txt

-binding for LTC2941 and LTC2943 battery gauges
+binding for LTC2941, LTC2942, LTC2943 and LTC2944 battery gauges
 
-Both the LTC2941 and LTC2943 measure battery capacity.
-The LTC2943 is compatible with the LTC2941, it adds voltage and
-temperature monitoring, and uses a slightly different conversion
-formula for the charge counter.
+All chips measure battery capacity.
+The LTC2942 is pin compatible with the LTC2941, it adds voltage and
+temperature monitoring, and is runtime detected. LTC2943 and LTC2944
+is software compatible, uses a slightly different conversion formula
+for the charge counter and adds voltage, current and temperature monitoring.
 
 Required properties:
-- compatible: Should contain "lltc,ltc2941" or "lltc,ltc2943" which also
-    indicates the type of I2C chip attached.
+- compatible: Should contain "lltc,ltc2941", "lltc,ltc2942", "lltc,ltc2943"
+    or "lltc,ltc2944" which also indicates the type of I2C chip attached.
 - reg: The 7-bit I2C address.
 - lltc,resistor-sense: The sense resistor value in milli-ohms. Can be a 32-bit
     negative value when the battery has been connected to the wrong end of the

drivers/power/reset/at91-sama5d2_shdwc.c

@@ -171,8 +171,8 @@ static u32 at91_shdwc_get_wakeup_input(struct platform_device *pdev,
 
 	for_each_child_of_node(np, cnp) {
 		if (of_property_read_u32(cnp, "reg", &wk_input)) {
-			dev_warn(&pdev->dev, "reg property is missing for %s\n",
-				 cnp->full_name);
+			dev_warn(&pdev->dev, "reg property is missing for %pOF\n",
+				 cnp);
 			continue;
 		}
 

drivers/power/supply/Kconfig

@@ -198,6 +198,15 @@ config BATTERY_BQ27XXX_I2C
 	  Say Y here to enable support for batteries with BQ27xxx chips
 	  connected over an I2C bus.
 
+config BATTERY_BQ27XXX_HDQ
+	tristate "BQ27xxx HDQ support"
+	depends on BATTERY_BQ27XXX
+	depends on W1
+	default y
+	help
+	  Say Y here to enable support for batteries with BQ27xxx chips
+	  connected over an HDQ bus.
+
 config BATTERY_BQ27XXX_DT_UPDATES_NVM
 	bool "BQ27xxx support for update of NVM/flash data memory"
 	depends on BATTERY_BQ27XXX_I2C
@@ -313,6 +322,19 @@ config BATTERY_MAX17042
 	  with MAX17042. This driver also supports max17047/50 chips which are
 	  improved version of max17042.
 
+config BATTERY_MAX1721X
+	tristate "MAX17211/MAX17215 standalone gas-gauge"
+	depends on W1
+	select REGMAP_W1
+	help
+	  MAX1721x is fuel-gauge systems for lithium-ion (Li+) batteries
+	  in handheld and portable equipment. MAX17211 used with single cell
+	  battery. MAX17215 designed for muticell battery. Both them have
+	  OneWire (W1) host interface.
+
+	  Say Y here to enable support for the MAX17211/MAX17215 standalone
+	  battery gas-gauge.
+
 config BATTERY_Z2
 	tristate "Z2 battery driver"
 	depends on I2C && MACH_ZIPIT2
@@ -365,6 +387,7 @@ config BATTERY_RX51
 config CHARGER_CPCAP
 	tristate "CPCAP PMIC Charger Driver"
 	depends on MFD_CPCAP && IIO
+	depends on OMAP_USB2 || (!OMAP_USB2 && COMPILE_TEST)
 	default MFD_CPCAP
 	help
 	  Say Y to enable support for CPCAP PMIC charger driver for Motorola

drivers/power/supply/Makefile

@@ -38,12 +38,14 @@ obj-$(CONFIG_BATTERY_SBS)	+= sbs-battery.o
 obj-$(CONFIG_CHARGER_SBS)	+= sbs-charger.o
 obj-$(CONFIG_BATTERY_BQ27XXX)	+= bq27xxx_battery.o
 obj-$(CONFIG_BATTERY_BQ27XXX_I2C) += bq27xxx_battery_i2c.o
+obj-$(CONFIG_BATTERY_BQ27XXX_HDQ) += bq27xxx_battery_hdq.o
 obj-$(CONFIG_BATTERY_DA9030)	+= da9030_battery.o
 obj-$(CONFIG_BATTERY_DA9052)	+= da9052-battery.o
 obj-$(CONFIG_CHARGER_DA9150)	+= da9150-charger.o
 obj-$(CONFIG_BATTERY_DA9150)	+= da9150-fg.o
 obj-$(CONFIG_BATTERY_MAX17040)	+= max17040_battery.o
 obj-$(CONFIG_BATTERY_MAX17042)	+= max17042_battery.o
+obj-$(CONFIG_BATTERY_MAX1721X)	+= max1721x_battery.o
 obj-$(CONFIG_BATTERY_Z2)	+= z2_battery.o
 obj-$(CONFIG_BATTERY_RT5033)	+= rt5033_battery.o
 obj-$(CONFIG_CHARGER_RT9455)	+= rt9455_charger.o

drivers/power/supply/act8945a_charger.c

@@ -596,9 +596,9 @@ static int act8945a_charger_probe(struct platform_device *pdev)
 		return ret;
 
 	irq = of_irq_get(pdev->dev.of_node, 0);
-	if (irq == -EPROBE_DEFER) {
+	if (irq <= 0) {
 		dev_err(&pdev->dev, "failed to find IRQ number\n");
-		return -EPROBE_DEFER;
+		return irq ?: -ENXIO;
 	}
 
 	ret = devm_request_irq(&pdev->dev, irq, act8945a_status_changed,

drivers/power/supply/bq24190_charger.c

@@ -16,6 +16,9 @@
 #include <linux/of_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/power_supply.h>
+#include <linux/power/bq24190_charger.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
 #include <linux/workqueue.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
@@ -43,6 +46,8 @@
 #define BQ24190_REG_POC_CHG_CONFIG_OTG			0x2
 #define BQ24190_REG_POC_SYS_MIN_MASK		(BIT(3) | BIT(2) | BIT(1))
 #define BQ24190_REG_POC_SYS_MIN_SHIFT		1
+#define BQ24190_REG_POC_SYS_MIN_MIN			3000
+#define BQ24190_REG_POC_SYS_MIN_MAX			3700
 #define BQ24190_REG_POC_BOOST_LIM_MASK		BIT(0)
 #define BQ24190_REG_POC_BOOST_LIM_SHIFT		0
 
@@ -57,9 +62,13 @@
 #define BQ24190_REG_PCTCC_IPRECHG_MASK		(BIT(7) | BIT(6) | BIT(5) | \
 						 BIT(4))
 #define BQ24190_REG_PCTCC_IPRECHG_SHIFT		4
+#define BQ24190_REG_PCTCC_IPRECHG_MIN			128
+#define BQ24190_REG_PCTCC_IPRECHG_MAX			2048
 #define BQ24190_REG_PCTCC_ITERM_MASK		(BIT(3) | BIT(2) | BIT(1) | \
 						 BIT(0))
 #define BQ24190_REG_PCTCC_ITERM_SHIFT		0
+#define BQ24190_REG_PCTCC_ITERM_MIN			128
+#define BQ24190_REG_PCTCC_ITERM_MAX			2048
 
 #define BQ24190_REG_CVC		0x04 /* Charge Voltage Control */
 #define BQ24190_REG_CVC_VREG_MASK		(BIT(7) | BIT(6) | BIT(5) | \
@@ -156,9 +165,13 @@ struct bq24190_dev_info {
 	struct extcon_dev		*extcon;
 	struct notifier_block		extcon_nb;
 	struct delayed_work		extcon_work;
+	struct delayed_work		input_current_limit_work;
 	char				model_name[I2C_NAME_SIZE];
 	bool				initialized;
 	bool				irq_event;
+	u16				sys_min;
+	u16				iprechg;
+	u16				iterm;
 	struct mutex			f_reg_lock;
 	u8				f_reg;
 	u8				ss_reg;
@@ -504,15 +517,112 @@ static int bq24190_sysfs_create_group(struct bq24190_dev_info *bdi)
 static inline void bq24190_sysfs_remove_group(struct bq24190_dev_info *bdi) {}
 #endif
 
-/*
- * According to the "Host Mode and default Mode" section of the
- * manual, a write to any register causes the bq24190 to switch
- * from default mode to host mode.  It will switch back to default
- * mode after a WDT timeout unless the WDT is turned off as well.
- * So, by simply turning off the WDT, we accomplish both with the
- * same write.
- */
-static int bq24190_set_mode_host(struct bq24190_dev_info *bdi)
+#ifdef CONFIG_REGULATOR
+static int bq24190_set_charge_mode(struct regulator_dev *dev, u8 val)
+{
+	struct bq24190_dev_info *bdi = rdev_get_drvdata(dev);
+	int ret;
+
+	ret = pm_runtime_get_sync(bdi->dev);
+	if (ret < 0) {
+		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
+		pm_runtime_put_noidle(bdi->dev);
+		return ret;
+	}
+
+	ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
+				 BQ24190_REG_POC_CHG_CONFIG_MASK,
+				 BQ24190_REG_POC_CHG_CONFIG_SHIFT, val);
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	return ret;
+}
+
+static int bq24190_vbus_enable(struct regulator_dev *dev)
+{
+	return bq24190_set_charge_mode(dev, BQ24190_REG_POC_CHG_CONFIG_OTG);
+}
+
+static int bq24190_vbus_disable(struct regulator_dev *dev)
+{
+	return bq24190_set_charge_mode(dev, BQ24190_REG_POC_CHG_CONFIG_CHARGE);
+}
+
+static int bq24190_vbus_is_enabled(struct regulator_dev *dev)
+{
+	struct bq24190_dev_info *bdi = rdev_get_drvdata(dev);
+	int ret;
+	u8 val;
+
+	ret = pm_runtime_get_sync(bdi->dev);
+	if (ret < 0) {
+		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
+		pm_runtime_put_noidle(bdi->dev);
+		return ret;
+	}
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
+				BQ24190_REG_POC_CHG_CONFIG_MASK,
+				BQ24190_REG_POC_CHG_CONFIG_SHIFT, &val);
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	return ret ? ret : val == BQ24190_REG_POC_CHG_CONFIG_OTG;
+}
+
+static const struct regulator_ops bq24190_vbus_ops = {
+	.enable = bq24190_vbus_enable,
+	.disable = bq24190_vbus_disable,
+	.is_enabled = bq24190_vbus_is_enabled,
+};
+
+static const struct regulator_desc bq24190_vbus_desc = {
+	.name = "usb_otg_vbus",
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+	.ops = &bq24190_vbus_ops,
+	.fixed_uV = 5000000,
+	.n_voltages = 1,
+};
+
+static const struct regulator_init_data bq24190_vbus_init_data = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi)
+{
+	struct bq24190_platform_data *pdata = bdi->dev->platform_data;
+	struct regulator_config cfg = { };
+	struct regulator_dev *reg;
+	int ret = 0;
+
+	cfg.dev = bdi->dev;
+	if (pdata && pdata->regulator_init_data)
+		cfg.init_data = pdata->regulator_init_data;
+	else
+		cfg.init_data = &bq24190_vbus_init_data;
+	cfg.driver_data = bdi;
+	reg = devm_regulator_register(bdi->dev, &bq24190_vbus_desc, &cfg);
+	if (IS_ERR(reg)) {
+		ret = PTR_ERR(reg);
+		dev_err(bdi->dev, "Can't register regulator: %d\n", ret);
+	}
+
+	return ret;
+}
+#else
+static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi)
+{
+	return 0;
+}
+#endif
+
+static int bq24190_set_config(struct bq24190_dev_info *bdi)
 {
 	int ret;
 	u8 v;
@@ -523,9 +633,52 @@ static int bq24190_set_mode_host(struct bq24190_dev_info *bdi)
 
 	bdi->watchdog = ((v & BQ24190_REG_CTTC_WATCHDOG_MASK) >>
 					BQ24190_REG_CTTC_WATCHDOG_SHIFT);
+
+	/*
+	 * According to the "Host Mode and default Mode" section of the
+	 * manual, a write to any register causes the bq24190 to switch
+	 * from default mode to host mode.  It will switch back to default
+	 * mode after a WDT timeout unless the WDT is turned off as well.
+	 * So, by simply turning off the WDT, we accomplish both with the
+	 * same write.
+	 */
 	v &= ~BQ24190_REG_CTTC_WATCHDOG_MASK;
 
-	return bq24190_write(bdi, BQ24190_REG_CTTC, v);
+	ret = bq24190_write(bdi, BQ24190_REG_CTTC, v);
+	if (ret < 0)
+		return ret;
+
+	if (bdi->sys_min) {
+		v = bdi->sys_min / 100 - 30; // manual section 9.5.1.2, table 9
+		ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
+					 BQ24190_REG_POC_SYS_MIN_MASK,
+					 BQ24190_REG_POC_SYS_MIN_SHIFT,
+					 v);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (bdi->iprechg) {
+		v = bdi->iprechg / 128 - 1; // manual section 9.5.1.4, table 11
+		ret = bq24190_write_mask(bdi, BQ24190_REG_PCTCC,
+					 BQ24190_REG_PCTCC_IPRECHG_MASK,
+					 BQ24190_REG_PCTCC_IPRECHG_SHIFT,
+					 v);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (bdi->iterm) {
+		v = bdi->iterm / 128 - 1; // manual section 9.5.1.4, table 11
+		ret = bq24190_write_mask(bdi, BQ24190_REG_PCTCC,
+					 BQ24190_REG_PCTCC_ITERM_MASK,
+					 BQ24190_REG_PCTCC_ITERM_SHIFT,
+					 v);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
 }
 
 static int bq24190_register_reset(struct bq24190_dev_info *bdi)
@@ -773,6 +926,38 @@ static int bq24190_charger_set_temp_alert_max(struct bq24190_dev_info *bdi,
 	return bq24190_battery_set_temp_alert_max(bdi, val);
 }
 
+static int bq24190_charger_get_precharge(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 v;
+	int ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_PCTCC,
+			BQ24190_REG_PCTCC_IPRECHG_MASK,
+			BQ24190_REG_PCTCC_IPRECHG_SHIFT, &v);
+	if (ret < 0)
+		return ret;
+
+	val->intval = ++v * 128 * 1000;
+	return 0;
+}
+
+static int bq24190_charger_get_charge_term(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 v;
+	int ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_PCTCC,
+			BQ24190_REG_PCTCC_ITERM_MASK,
+			BQ24190_REG_PCTCC_ITERM_SHIFT, &v);
+	if (ret < 0)
+		return ret;
+
+	val->intval = ++v * 128 * 1000;
+	return 0;
+}
+
 static int bq24190_charger_get_current(struct bq24190_dev_info *bdi,
 		union power_supply_propval *val)
 {
@@ -865,6 +1050,33 @@ static int bq24190_charger_set_voltage(struct bq24190_dev_info *bdi,
 			ARRAY_SIZE(bq24190_cvc_vreg_values), val->intval);
 }
 
+static int bq24190_charger_get_iinlimit(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	int iinlimit, ret;
+
+	ret = bq24190_get_field_val(bdi, BQ24190_REG_ISC,
+			BQ24190_REG_ISC_IINLIM_MASK,
+			BQ24190_REG_ISC_IINLIM_SHIFT,
+			bq24190_isc_iinlim_values,
+			ARRAY_SIZE(bq24190_isc_iinlim_values), &iinlimit);
+	if (ret < 0)
+		return ret;
+
+	val->intval = iinlimit;
+	return 0;
+}
+
+static int bq24190_charger_set_iinlimit(struct bq24190_dev_info *bdi,
+		const union power_supply_propval *val)
+{
+	return bq24190_set_field_val(bdi, BQ24190_REG_ISC,
+			BQ24190_REG_ISC_IINLIM_MASK,
+			BQ24190_REG_ISC_IINLIM_SHIFT,
+			bq24190_isc_iinlim_values,
+			ARRAY_SIZE(bq24190_isc_iinlim_values), val->intval);
+}
+
 static int bq24190_charger_get_property(struct power_supply *psy,
 		enum power_supply_property psp, union power_supply_propval *val)
 {
@@ -893,6 +1105,12 @@ static int bq24190_charger_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
 		ret =  bq24190_charger_get_temp_alert_max(bdi, val);
 		break;
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		ret = bq24190_charger_get_precharge(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		ret = bq24190_charger_get_charge_term(bdi, val);
+		break;
 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
 		ret = bq24190_charger_get_current(bdi, val);
 		break;
@@ -905,6 +1123,9 @@ static int bq24190_charger_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
 		ret = bq24190_charger_get_voltage_max(bdi, val);
 		break;
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = bq24190_charger_get_iinlimit(bdi, val);
+		break;
 	case POWER_SUPPLY_PROP_SCOPE:
 		val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
 		ret = 0;
@@ -956,6 +1177,9 @@ static int bq24190_charger_set_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
 		ret = bq24190_charger_set_voltage(bdi, val);
 		break;
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = bq24190_charger_set_iinlimit(bdi, val);
+		break;
 	default:
 		ret = -EINVAL;
 	}
@@ -977,6 +1201,7 @@ static int bq24190_charger_property_is_writeable(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_CHARGE_TYPE:
 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
 		ret = 1;
 		break;
 	default:
@@ -986,16 +1211,45 @@ static int bq24190_charger_property_is_writeable(struct power_supply *psy,
 	return ret;
 }
 
+static void bq24190_input_current_limit_work(struct work_struct *work)
+{
+	struct bq24190_dev_info *bdi =
+		container_of(work, struct bq24190_dev_info,
+			     input_current_limit_work.work);
+
+	power_supply_set_input_current_limit_from_supplier(bdi->charger);
+}
+
+/* Sync the input-current-limit with our parent supply (if we have one) */
+static void bq24190_charger_external_power_changed(struct power_supply *psy)
+{
+	struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+
+	/*
+	 * The Power-Good detection may take up to 220ms, sometimes
+	 * the external charger detection is quicker, and the bq24190 will
+	 * reset to iinlim based on its own charger detection (which is not
+	 * hooked up when using external charger detection) resulting in a
+	 * too low default 500mA iinlim. Delay setting the input-current-limit
+	 * for 300ms to avoid this.
+	 */
+	queue_delayed_work(system_wq, &bdi->input_current_limit_work,
+			   msecs_to_jiffies(300));
+}
+
 static enum power_supply_property bq24190_charger_properties[] = {
 	POWER_SUPPLY_PROP_CHARGE_TYPE,
 	POWER_SUPPLY_PROP_HEALTH,
 	POWER_SUPPLY_PROP_ONLINE,
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
+	POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
 	POWER_SUPPLY_PROP_SCOPE,
 	POWER_SUPPLY_PROP_MODEL_NAME,
 	POWER_SUPPLY_PROP_MANUFACTURER,
@@ -1013,6 +1267,7 @@ static const struct power_supply_desc bq24190_charger_desc = {
 	.get_property		= bq24190_charger_get_property,
 	.set_property		= bq24190_charger_set_property,
 	.property_is_writeable	= bq24190_charger_property_is_writeable,
+	.external_power_changed	= bq24190_charger_external_power_changed,
 };
 
 /* Battery power supply property routines */
@@ -1460,13 +1715,50 @@ static int bq24190_hw_init(struct bq24190_dev_info *bdi)
 	if (ret < 0)
 		return ret;
 
-	ret = bq24190_set_mode_host(bdi);
+	ret = bq24190_set_config(bdi);
 	if (ret < 0)
 		return ret;
 
 	return bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
 }
 
+static int bq24190_get_config(struct bq24190_dev_info *bdi)
+{
+	const char * const s = "ti,system-minimum-microvolt";
+	struct power_supply_battery_info info = {};
+	int v;
+
+	if (device_property_read_u32(bdi->dev, s, &v) == 0) {
+		v /= 1000;
+		if (v >= BQ24190_REG_POC_SYS_MIN_MIN
+		 && v <= BQ24190_REG_POC_SYS_MIN_MAX)
+			bdi->sys_min = v;
+		else
+			dev_warn(bdi->dev, "invalid value for %s: %u\n", s, v);
+	}
+
+	if (bdi->dev->of_node &&
+	    !power_supply_get_battery_info(bdi->charger, &info)) {
+		v = info.precharge_current_ua / 1000;
+		if (v >= BQ24190_REG_PCTCC_IPRECHG_MIN
+		 && v <= BQ24190_REG_PCTCC_IPRECHG_MAX)
+			bdi->iprechg = v;
+		else
+			dev_warn(bdi->dev, "invalid value for battery:precharge-current-microamp: %d\n",
+				 v);
+
+		v = info.charge_term_current_ua / 1000;
+		if (v >= BQ24190_REG_PCTCC_ITERM_MIN
+		 && v <= BQ24190_REG_PCTCC_ITERM_MAX)
+			bdi->iterm = v;
+		else
+			dev_warn(bdi->dev, "invalid value for battery:charge-term-current-microamp: %d\n",
+				 v);
+	}
+
+	return 0;
+}
+
 static int bq24190_probe(struct i2c_client *client,
 		const struct i2c_device_id *id)
 {
@@ -1494,10 +1786,12 @@ static int bq24190_probe(struct i2c_client *client,
 	mutex_init(&bdi->f_reg_lock);
 	bdi->f_reg = 0;
 	bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
+	INIT_DELAYED_WORK(&bdi->input_current_limit_work,
+			  bq24190_input_current_limit_work);
 
 	i2c_set_clientdata(client, bdi);
 
-	if (!client->irq) {
+	if (client->irq <= 0) {
 		dev_err(dev, "Can't get irq info\n");
 		return -EINVAL;
 	}
@@ -1530,13 +1824,8 @@ static int bq24190_probe(struct i2c_client *client,
 		goto out_pmrt;
 	}
 
-	ret = bq24190_hw_init(bdi);
-	if (ret < 0) {
-		dev_err(dev, "Hardware init failed\n");
-		goto out_pmrt;
-	}
-
 	charger_cfg.drv_data = bdi;
+	charger_cfg.of_node = dev->of_node;
 	charger_cfg.supplied_to = bq24190_charger_supplied_to;
 	charger_cfg.num_supplicants = ARRAY_SIZE(bq24190_charger_supplied_to),
 	bdi->charger = power_supply_register(dev, &bq24190_charger_desc,
@@ -1560,8 +1849,20 @@ static int bq24190_probe(struct i2c_client *client,
 		}
 	}
 
+	ret = bq24190_get_config(bdi);
+	if (ret < 0) {
+		dev_err(dev, "Can't get devicetree config\n");
+		goto out_charger;
+	}
+
+	ret = bq24190_hw_init(bdi);
+	if (ret < 0) {
+		dev_err(dev, "Hardware init failed\n");
+		goto out_charger;
+	}
+
 	ret = bq24190_sysfs_create_group(bdi);
-	if (ret) {
+	if (ret < 0) {
 		dev_err(dev, "Can't create sysfs entries\n");
 		goto out_charger;
 	}
@@ -1577,6 +1878,10 @@ static int bq24190_probe(struct i2c_client *client,
 		goto out_sysfs;
 	}
 
+	ret = bq24190_register_vbus_regulator(bdi);
+	if (ret < 0)
+		goto out_sysfs;
+
 	if (bdi->extcon) {
 		INIT_DELAYED_WORK(&bdi->extcon_work, bq24190_extcon_work);
 		bdi->extcon_nb.notifier_call = bq24190_extcon_event;
@@ -1704,7 +2009,7 @@ static __maybe_unused int bq24190_pm_resume(struct device *dev)
 	}
 
 	bq24190_register_reset(bdi);
-	bq24190_set_mode_host(bdi);
+	bq24190_set_config(bdi);
 	bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
 
 	if (error >= 0) {
@@ -1736,6 +2041,7 @@ MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
 #ifdef CONFIG_OF
 static const struct of_device_id bq24190_of_match[] = {
 	{ .compatible = "ti,bq24190", },
+	{ .compatible = "ti,bq24192i", },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, bq24190_of_match);

drivers/power/supply/bq27xxx_battery.c

@@ -58,8 +58,6 @@
 
 #include <linux/power/bq27xxx_battery.h>
 
-#define DRIVER_VERSION		"1.2.0"
-
 #define BQ27XXX_MANUFACTURER	"Texas Instruments"
 
 /* BQ27XXX Flags */
@@ -132,8 +130,8 @@ enum bq27xxx_reg_index {
 	[BQ27XXX_DM_CKSUM] = 0x60
 
 /* Register mappings */
-static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
-	[BQ27000] = {
+static u8
+	bq27000_regs[BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_CTRL] = 0x00,
 		[BQ27XXX_REG_TEMP] = 0x06,
 		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
@@ -157,7 +155,7 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
 		[BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
 		[BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
 	},
-	[BQ27010] = {
+	bq27010_regs[BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_CTRL] = 0x00,
 		[BQ27XXX_REG_TEMP] = 0x06,
 		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
@@ -181,7 +179,7 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
 		[BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
 		[BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
 	},
-	[BQ2750X] = {
+	bq2750x_regs[BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_CTRL] = 0x00,
 		[BQ27XXX_REG_TEMP] = 0x06,
 		[BQ27XXX_REG_INT_TEMP] = 0x28,
@@ -201,47 +199,9 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
 		BQ27XXX_DM_REG_ROWS,
 	},
-	[BQ2751X] = {
-		[BQ27XXX_REG_CTRL] = 0x00,
-		[BQ27XXX_REG_TEMP] = 0x06,
-		[BQ27XXX_REG_INT_TEMP] = 0x28,
-		[BQ27XXX_REG_VOLT] = 0x08,
-		[BQ27XXX_REG_AI] = 0x14,
-		[BQ27XXX_REG_FLAGS] = 0x0a,
-		[BQ27XXX_REG_TTE] = 0x16,
-		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
-		[BQ27XXX_REG_TTES] = 0x1a,
-		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
-		[BQ27XXX_REG_NAC] = 0x0c,
-		[BQ27XXX_REG_FCC] = 0x12,
-		[BQ27XXX_REG_CYCT] = 0x1e,
-		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
-		[BQ27XXX_REG_SOC] = 0x20,
-		[BQ27XXX_REG_DCAP] = 0x2e,
-		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
-		BQ27XXX_DM_REG_ROWS,
-	},
-	[BQ27500] = {
-		[BQ27XXX_REG_CTRL] = 0x00,
-		[BQ27XXX_REG_TEMP] = 0x06,
-		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
-		[BQ27XXX_REG_VOLT] = 0x08,
-		[BQ27XXX_REG_AI] = 0x14,
-		[BQ27XXX_REG_FLAGS] = 0x0a,
-		[BQ27XXX_REG_TTE] = 0x16,
-		[BQ27XXX_REG_TTF] = 0x18,
-		[BQ27XXX_REG_TTES] = 0x1c,
-		[BQ27XXX_REG_TTECP] = 0x26,
-		[BQ27XXX_REG_NAC] = 0x0c,
-		[BQ27XXX_REG_FCC] = 0x12,
-		[BQ27XXX_REG_CYCT] = 0x2a,
-		[BQ27XXX_REG_AE] = 0x22,
-		[BQ27XXX_REG_SOC] = 0x2c,
-		[BQ27XXX_REG_DCAP] = 0x3c,
-		[BQ27XXX_REG_AP] = 0x24,
-		BQ27XXX_DM_REG_ROWS,
-	},
-	[BQ27510G1] = {
+#define bq2751x_regs bq27510g3_regs
+#define bq2752x_regs bq27510g3_regs
+	bq27500_regs[BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_CTRL] = 0x00,
 		[BQ27XXX_REG_TEMP] = 0x06,
 		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
@@ -261,27 +221,9 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_AP] = 0x24,
 		BQ27XXX_DM_REG_ROWS,
 	},
-	[BQ27510G2] = {
-		[BQ27XXX_REG_CTRL] = 0x00,
-		[BQ27XXX_REG_TEMP] = 0x06,
-		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
-		[BQ27XXX_REG_VOLT] = 0x08,
-		[BQ27XXX_REG_AI] = 0x14,
-		[BQ27XXX_REG_FLAGS] = 0x0a,
-		[BQ27XXX_REG_TTE] = 0x16,
-		[BQ27XXX_REG_TTF] = 0x18,
-		[BQ27XXX_REG_TTES] = 0x1c,
-		[BQ27XXX_REG_TTECP] = 0x26,
-		[BQ27XXX_REG_NAC] = 0x0c,
-		[BQ27XXX_REG_FCC] = 0x12,
-		[BQ27XXX_REG_CYCT] = 0x2a,
-		[BQ27XXX_REG_AE] = 0x22,
-		[BQ27XXX_REG_SOC] = 0x2c,
-		[BQ27XXX_REG_DCAP] = 0x3c,
-		[BQ27XXX_REG_AP] = 0x24,
-		BQ27XXX_DM_REG_ROWS,
-	},
-	[BQ27510G3] = {
+#define bq27510g1_regs bq27500_regs
+#define bq27510g2_regs bq27500_regs
+	bq27510g3_regs[BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_CTRL] = 0x00,
 		[BQ27XXX_REG_TEMP] = 0x06,
 		[BQ27XXX_REG_INT_TEMP] = 0x28,
@@ -301,7 +243,7 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
 		BQ27XXX_DM_REG_ROWS,
 	},
-	[BQ27520G1] = {
+	bq27520g1_regs[BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_CTRL] = 0x00,
 		[BQ27XXX_REG_TEMP] = 0x06,
 		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
@@ -321,7 +263,7 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_AP] = 0x24,
 		BQ27XXX_DM_REG_ROWS,
 	},
-	[BQ27520G2] = {
+	bq27520g2_regs[BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_CTRL] = 0x00,
 		[BQ27XXX_REG_TEMP] = 0x06,
 		[BQ27XXX_REG_INT_TEMP] = 0x36,
@@ -341,7 +283,7 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_AP] = 0x24,
 		BQ27XXX_DM_REG_ROWS,
 	},
-	[BQ27520G3] = {
+	bq27520g3_regs[BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_CTRL] = 0x00,
 		[BQ27XXX_REG_TEMP] = 0x06,
 		[BQ27XXX_REG_INT_TEMP] = 0x36,
@@ -361,7 +303,7 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_AP] = 0x24,
 		BQ27XXX_DM_REG_ROWS,
 	},
-	[BQ27520G4] = {
+	bq27520g4_regs[BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_CTRL] = 0x00,
 		[BQ27XXX_REG_TEMP] = 0x06,
 		[BQ27XXX_REG_INT_TEMP] = 0x28,
@@ -381,7 +323,7 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
 		BQ27XXX_DM_REG_ROWS,
 	},
-	[BQ27530] = {
+	bq27530_regs[BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_CTRL] = 0x00,
 		[BQ27XXX_REG_TEMP] = 0x06,
 		[BQ27XXX_REG_INT_TEMP] = 0x32,
@@ -401,7 +343,8 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_AP] = 0x24,
 		BQ27XXX_DM_REG_ROWS,
 	},
-	[BQ27541] = {
+#define bq27531_regs bq27530_regs
+	bq27541_regs[BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_CTRL] = 0x00,
 		[BQ27XXX_REG_TEMP] = 0x06,
 		[BQ27XXX_REG_INT_TEMP] = 0x28,
@@ -421,7 +364,10 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_AP] = 0x24,
 		BQ27XXX_DM_REG_ROWS,
 	},
-	[BQ27545] = {
+#define bq27542_regs bq27541_regs
+#define bq27546_regs bq27541_regs
+#define bq27742_regs bq27541_regs
+	bq27545_regs[BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_CTRL] = 0x00,
 		[BQ27XXX_REG_TEMP] = 0x06,
 		[BQ27XXX_REG_INT_TEMP] = 0x28,
@@ -441,7 +387,7 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_AP] = 0x24,
 		BQ27XXX_DM_REG_ROWS,
 	},
-	[BQ27421] = {
+	bq27421_regs[BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_CTRL] = 0x00,
 		[BQ27XXX_REG_TEMP] = 0x02,
 		[BQ27XXX_REG_INT_TEMP] = 0x1e,
@@ -460,10 +406,12 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_DCAP] = 0x3c,
 		[BQ27XXX_REG_AP] = 0x18,
 		BQ27XXX_DM_REG_ROWS,
-	},
-};
+	};
+#define bq27425_regs bq27421_regs
+#define bq27441_regs bq27421_regs
+#define bq27621_regs bq27421_regs
 
-static enum power_supply_property bq27000_battery_props[] = {
+static enum power_supply_property bq27000_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -485,7 +433,7 @@ static enum power_supply_property bq27000_battery_props[] = {
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
-static enum power_supply_property bq27010_battery_props[] = {
+static enum power_supply_property bq27010_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -505,25 +453,11 @@ static enum power_supply_property bq27010_battery_props[] = {
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
-static enum power_supply_property bq2750x_battery_props[] = {
-	POWER_SUPPLY_PROP_STATUS,
-	POWER_SUPPLY_PROP_PRESENT,
-	POWER_SUPPLY_PROP_VOLTAGE_NOW,
-	POWER_SUPPLY_PROP_CURRENT_NOW,
-	POWER_SUPPLY_PROP_CAPACITY,
-	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
-	POWER_SUPPLY_PROP_TEMP,
-	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
-	POWER_SUPPLY_PROP_TECHNOLOGY,
-	POWER_SUPPLY_PROP_CHARGE_FULL,
-	POWER_SUPPLY_PROP_CHARGE_NOW,
-	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
-	POWER_SUPPLY_PROP_CYCLE_COUNT,
-	POWER_SUPPLY_PROP_HEALTH,
-	POWER_SUPPLY_PROP_MANUFACTURER,
-};
+#define bq2750x_props bq27510g3_props
+#define bq2751x_props bq27510g3_props
+#define bq2752x_props bq27510g3_props
 
-static enum power_supply_property bq2751x_battery_props[] = {
+static enum power_supply_property bq27500_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -532,16 +466,21 @@ static enum power_supply_property bq2751x_battery_props[] = {
 	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 	POWER_SUPPLY_PROP_TEMP,
 	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
 	POWER_SUPPLY_PROP_CHARGE_FULL,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_ENERGY_NOW,
+	POWER_SUPPLY_PROP_POWER_AVG,
 	POWER_SUPPLY_PROP_HEALTH,
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
+#define bq27510g1_props bq27500_props
+#define bq27510g2_props bq27500_props
 
-static enum power_supply_property bq27500_battery_props[] = {
+static enum power_supply_property bq27510g3_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -550,19 +489,16 @@ static enum power_supply_property bq27500_battery_props[] = {
 	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 	POWER_SUPPLY_PROP_TEMP,
 	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
-	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
 	POWER_SUPPLY_PROP_CHARGE_FULL,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 	POWER_SUPPLY_PROP_CYCLE_COUNT,
-	POWER_SUPPLY_PROP_ENERGY_NOW,
-	POWER_SUPPLY_PROP_POWER_AVG,
 	POWER_SUPPLY_PROP_HEALTH,
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
-static enum power_supply_property bq27510g1_battery_props[] = {
+static enum power_supply_property bq27520g1_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -576,14 +512,15 @@ static enum power_supply_property bq27510g1_battery_props[] = {
 	POWER_SUPPLY_PROP_CHARGE_FULL,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
-	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_ENERGY_NOW,
 	POWER_SUPPLY_PROP_POWER_AVG,
 	POWER_SUPPLY_PROP_HEALTH,
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
-static enum power_supply_property bq27510g2_battery_props[] = {
+#define bq27520g2_props bq27500_props
+
+static enum power_supply_property bq27520g3_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -592,7 +529,6 @@ static enum power_supply_property bq27510g2_battery_props[] = {
 	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 	POWER_SUPPLY_PROP_TEMP,
 	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
-	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
 	POWER_SUPPLY_PROP_CHARGE_FULL,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
@@ -604,7 +540,7 @@ static enum power_supply_property bq27510g2_battery_props[] = {
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
-static enum power_supply_property bq27510g3_battery_props[] = {
+static enum power_supply_property bq27520g4_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -616,13 +552,12 @@ static enum power_supply_property bq27510g3_battery_props[] = {
 	POWER_SUPPLY_PROP_TECHNOLOGY,
 	POWER_SUPPLY_PROP_CHARGE_FULL,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
-	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_HEALTH,
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
-static enum power_supply_property bq27520g1_battery_props[] = {
+static enum power_supply_property bq27530_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -631,18 +566,17 @@ static enum power_supply_property bq27520g1_battery_props[] = {
 	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 	POWER_SUPPLY_PROP_TEMP,
 	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
-	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
 	POWER_SUPPLY_PROP_CHARGE_FULL,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
-	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
-	POWER_SUPPLY_PROP_ENERGY_NOW,
 	POWER_SUPPLY_PROP_POWER_AVG,
 	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
+#define bq27531_props bq27530_props
 
-static enum power_supply_property bq27520g2_battery_props[] = {
+static enum power_supply_property bq27541_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -651,19 +585,20 @@ static enum power_supply_property bq27520g2_battery_props[] = {
 	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 	POWER_SUPPLY_PROP_TEMP,
 	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
-	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
 	POWER_SUPPLY_PROP_CHARGE_FULL,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 	POWER_SUPPLY_PROP_CYCLE_COUNT,
-	POWER_SUPPLY_PROP_ENERGY_NOW,
 	POWER_SUPPLY_PROP_POWER_AVG,
 	POWER_SUPPLY_PROP_HEALTH,
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
+#define bq27542_props bq27541_props
+#define bq27546_props bq27541_props
+#define bq27742_props bq27541_props
 
-static enum power_supply_property bq27520g3_battery_props[] = {
+static enum power_supply_property bq27545_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -675,15 +610,13 @@ static enum power_supply_property bq27520g3_battery_props[] = {
 	POWER_SUPPLY_PROP_TECHNOLOGY,
 	POWER_SUPPLY_PROP_CHARGE_FULL,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
-	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_HEALTH,
 	POWER_SUPPLY_PROP_CYCLE_COUNT,
-	POWER_SUPPLY_PROP_ENERGY_NOW,
 	POWER_SUPPLY_PROP_POWER_AVG,
-	POWER_SUPPLY_PROP_HEALTH,
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
-static enum power_supply_property bq27520g4_battery_props[] = {
+static enum power_supply_property bq27421_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
@@ -691,111 +624,144 @@ static enum power_supply_property bq27520g4_battery_props[] = {
 	POWER_SUPPLY_PROP_CAPACITY,
 	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 	POWER_SUPPLY_PROP_TEMP,
-	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
 	POWER_SUPPLY_PROP_CHARGE_FULL,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
-	POWER_SUPPLY_PROP_CYCLE_COUNT,
-	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
+#define bq27425_props bq27421_props
+#define bq27441_props bq27421_props
+#define bq27621_props bq27421_props
 
-static enum power_supply_property bq27530_battery_props[] = {
-	POWER_SUPPLY_PROP_STATUS,
-	POWER_SUPPLY_PROP_PRESENT,
-	POWER_SUPPLY_PROP_VOLTAGE_NOW,
-	POWER_SUPPLY_PROP_CURRENT_NOW,
-	POWER_SUPPLY_PROP_CAPACITY,
-	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
-	POWER_SUPPLY_PROP_TEMP,
-	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
-	POWER_SUPPLY_PROP_TECHNOLOGY,
-	POWER_SUPPLY_PROP_CHARGE_FULL,
-	POWER_SUPPLY_PROP_CHARGE_NOW,
-	POWER_SUPPLY_PROP_POWER_AVG,
-	POWER_SUPPLY_PROP_HEALTH,
-	POWER_SUPPLY_PROP_CYCLE_COUNT,
-	POWER_SUPPLY_PROP_MANUFACTURER,
+struct bq27xxx_dm_reg {
+	u8 subclass_id;
+	u8 offset;
+	u8 bytes;
+	u16 min, max;
 };
 
-static enum power_supply_property bq27541_battery_props[] = {
-	POWER_SUPPLY_PROP_STATUS,
-	POWER_SUPPLY_PROP_PRESENT,
-	POWER_SUPPLY_PROP_VOLTAGE_NOW,
-	POWER_SUPPLY_PROP_CURRENT_NOW,
-	POWER_SUPPLY_PROP_CAPACITY,
-	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
-	POWER_SUPPLY_PROP_TEMP,
-	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
-	POWER_SUPPLY_PROP_TECHNOLOGY,
-	POWER_SUPPLY_PROP_CHARGE_FULL,
-	POWER_SUPPLY_PROP_CHARGE_NOW,
-	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
-	POWER_SUPPLY_PROP_CYCLE_COUNT,
-	POWER_SUPPLY_PROP_POWER_AVG,
-	POWER_SUPPLY_PROP_HEALTH,
-	POWER_SUPPLY_PROP_MANUFACTURER,
+enum bq27xxx_dm_reg_id {
+	BQ27XXX_DM_DESIGN_CAPACITY = 0,
+	BQ27XXX_DM_DESIGN_ENERGY,
+	BQ27XXX_DM_TERMINATE_VOLTAGE,
 };
 
-static enum power_supply_property bq27545_battery_props[] = {
-	POWER_SUPPLY_PROP_STATUS,
-	POWER_SUPPLY_PROP_PRESENT,
-	POWER_SUPPLY_PROP_VOLTAGE_NOW,
-	POWER_SUPPLY_PROP_CURRENT_NOW,
-	POWER_SUPPLY_PROP_CAPACITY,
-	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
-	POWER_SUPPLY_PROP_TEMP,
-	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
-	POWER_SUPPLY_PROP_TECHNOLOGY,
-	POWER_SUPPLY_PROP_CHARGE_FULL,
-	POWER_SUPPLY_PROP_CHARGE_NOW,
-	POWER_SUPPLY_PROP_HEALTH,
-	POWER_SUPPLY_PROP_CYCLE_COUNT,
-	POWER_SUPPLY_PROP_POWER_AVG,
-	POWER_SUPPLY_PROP_MANUFACTURER,
+#define bq27000_dm_regs 0
+#define bq27010_dm_regs 0
+#define bq2750x_dm_regs 0
+#define bq2751x_dm_regs 0
+#define bq2752x_dm_regs 0
+
+#if 0 /* not yet tested */
+static struct bq27xxx_dm_reg bq27500_dm_regs[] = {
+	[BQ27XXX_DM_DESIGN_CAPACITY]   = { 48, 10, 2,    0, 65535 },
+	[BQ27XXX_DM_DESIGN_ENERGY]     = { }, /* missing on chip */
+	[BQ27XXX_DM_TERMINATE_VOLTAGE] = { 80, 48, 2, 1000, 32767 },
 };
+#else
+#define bq27500_dm_regs 0
+#endif
 
-static enum power_supply_property bq27421_battery_props[] = {
-	POWER_SUPPLY_PROP_STATUS,
-	POWER_SUPPLY_PROP_PRESENT,
-	POWER_SUPPLY_PROP_VOLTAGE_NOW,
-	POWER_SUPPLY_PROP_CURRENT_NOW,
-	POWER_SUPPLY_PROP_CAPACITY,
-	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
-	POWER_SUPPLY_PROP_TEMP,
-	POWER_SUPPLY_PROP_TECHNOLOGY,
-	POWER_SUPPLY_PROP_CHARGE_FULL,
-	POWER_SUPPLY_PROP_CHARGE_NOW,
-	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
-	POWER_SUPPLY_PROP_MANUFACTURER,
+/* todo create data memory definitions from datasheets and test on chips */
+#define bq27510g1_dm_regs 0
+#define bq27510g2_dm_regs 0
+#define bq27510g3_dm_regs 0
+#define bq27520g1_dm_regs 0
+#define bq27520g2_dm_regs 0
+#define bq27520g3_dm_regs 0
+#define bq27520g4_dm_regs 0
+#define bq27530_dm_regs 0
+#define bq27531_dm_regs 0
+#define bq27541_dm_regs 0
+#define bq27542_dm_regs 0
+#define bq27546_dm_regs 0
+#define bq27742_dm_regs 0
+
+#if 0 /* not yet tested */
+static struct bq27xxx_dm_reg bq27545_dm_regs[] = {
+	[BQ27XXX_DM_DESIGN_CAPACITY]   = { 48, 23, 2,    0, 32767 },
+	[BQ27XXX_DM_DESIGN_ENERGY]     = { 48, 25, 2,    0, 32767 },
+	[BQ27XXX_DM_TERMINATE_VOLTAGE] = { 80, 67, 2, 2800,  3700 },
 };
+#else
+#define bq27545_dm_regs 0
+#endif
 
-#define BQ27XXX_PROP(_id, _prop)		\
-	[_id] = {				\
-		.props = _prop,			\
-		.size = ARRAY_SIZE(_prop),	\
-	}
+static struct bq27xxx_dm_reg bq27421_dm_regs[] = {
+	[BQ27XXX_DM_DESIGN_CAPACITY]   = { 82, 10, 2,    0,  8000 },
+	[BQ27XXX_DM_DESIGN_ENERGY]     = { 82, 12, 2,    0, 32767 },
+	[BQ27XXX_DM_TERMINATE_VOLTAGE] = { 82, 16, 2, 2500,  3700 },
+};
+
+static struct bq27xxx_dm_reg bq27425_dm_regs[] = {
+	[BQ27XXX_DM_DESIGN_CAPACITY]   = { 82, 12, 2,    0, 32767 },
+	[BQ27XXX_DM_DESIGN_ENERGY]     = { 82, 14, 2,    0, 32767 },
+	[BQ27XXX_DM_TERMINATE_VOLTAGE] = { 82, 18, 2, 2800,  3700 },
+};
+
+#if 0 /* not yet tested */
+#define bq27441_dm_regs bq27421_dm_regs
+#else
+#define bq27441_dm_regs 0
+#endif
+
+#if 0 /* not yet tested */
+static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
+	[BQ27XXX_DM_DESIGN_CAPACITY]   = { 82, 3, 2,    0,  8000 },
+	[BQ27XXX_DM_DESIGN_ENERGY]     = { 82, 5, 2,    0, 32767 },
+	[BQ27XXX_DM_TERMINATE_VOLTAGE] = { 82, 9, 2, 2500,  3700 },
+};
+#else
+#define bq27621_dm_regs 0
+#endif
+
+#define BQ27XXX_O_ZERO	0x00000001
+#define BQ27XXX_O_OTDC	0x00000002
+#define BQ27XXX_O_UTOT  0x00000004
+#define BQ27XXX_O_CFGUP	0x00000008
+#define BQ27XXX_O_RAM	0x00000010
+
+#define BQ27XXX_DATA(ref, key, opt) {		\
+	.opts = (opt),				\
+	.unseal_key = key,			\
+	.regs  = ref##_regs,			\
+	.dm_regs = ref##_dm_regs,		\
+	.props = ref##_props,			\
+	.props_size = ARRAY_SIZE(ref##_props) }
 
 static struct {
+	u32 opts;
+	u32 unseal_key;
+	u8 *regs;
+	struct bq27xxx_dm_reg *dm_regs;
 	enum power_supply_property *props;
-	size_t size;
-} bq27xxx_battery_props[] = {
-	BQ27XXX_PROP(BQ27000, bq27000_battery_props),
-	BQ27XXX_PROP(BQ27010, bq27010_battery_props),
-	BQ27XXX_PROP(BQ2750X, bq2750x_battery_props),
-	BQ27XXX_PROP(BQ2751X, bq2751x_battery_props),
-	BQ27XXX_PROP(BQ27500, bq27500_battery_props),
-	BQ27XXX_PROP(BQ27510G1, bq27510g1_battery_props),
-	BQ27XXX_PROP(BQ27510G2, bq27510g2_battery_props),
-	BQ27XXX_PROP(BQ27510G3, bq27510g3_battery_props),
-	BQ27XXX_PROP(BQ27520G1, bq27520g1_battery_props),
-	BQ27XXX_PROP(BQ27520G2, bq27520g2_battery_props),
-	BQ27XXX_PROP(BQ27520G3, bq27520g3_battery_props),
-	BQ27XXX_PROP(BQ27520G4, bq27520g4_battery_props),
-	BQ27XXX_PROP(BQ27530, bq27530_battery_props),
-	BQ27XXX_PROP(BQ27541, bq27541_battery_props),
-	BQ27XXX_PROP(BQ27545, bq27545_battery_props),
-	BQ27XXX_PROP(BQ27421, bq27421_battery_props),
+	size_t props_size;
+} bq27xxx_chip_data[] = {
+	[BQ27000]   = BQ27XXX_DATA(bq27000,   0         , BQ27XXX_O_ZERO),
+	[BQ27010]   = BQ27XXX_DATA(bq27010,   0         , BQ27XXX_O_ZERO),
+	[BQ2750X]   = BQ27XXX_DATA(bq2750x,   0         , BQ27XXX_O_OTDC),
+	[BQ2751X]   = BQ27XXX_DATA(bq2751x,   0         , BQ27XXX_O_OTDC),
+	[BQ2752X]   = BQ27XXX_DATA(bq2752x,   0         , BQ27XXX_O_OTDC),
+	[BQ27500]   = BQ27XXX_DATA(bq27500,   0x04143672, BQ27XXX_O_OTDC),
+	[BQ27510G1] = BQ27XXX_DATA(bq27510g1, 0         , BQ27XXX_O_OTDC),
+	[BQ27510G2] = BQ27XXX_DATA(bq27510g2, 0         , BQ27XXX_O_OTDC),
+	[BQ27510G3] = BQ27XXX_DATA(bq27510g3, 0         , BQ27XXX_O_OTDC),
+	[BQ27520G1] = BQ27XXX_DATA(bq27520g1, 0         , BQ27XXX_O_OTDC),
+	[BQ27520G2] = BQ27XXX_DATA(bq27520g2, 0         , BQ27XXX_O_OTDC),
+	[BQ27520G3] = BQ27XXX_DATA(bq27520g3, 0         , BQ27XXX_O_OTDC),
+	[BQ27520G4] = BQ27XXX_DATA(bq27520g4, 0         , BQ27XXX_O_OTDC),
+	[BQ27530]   = BQ27XXX_DATA(bq27530,   0         , BQ27XXX_O_UTOT),
+	[BQ27531]   = BQ27XXX_DATA(bq27531,   0         , BQ27XXX_O_UTOT),
+	[BQ27541]   = BQ27XXX_DATA(bq27541,   0         , BQ27XXX_O_OTDC),
+	[BQ27542]   = BQ27XXX_DATA(bq27542,   0         , BQ27XXX_O_OTDC),
+	[BQ27546]   = BQ27XXX_DATA(bq27546,   0         , BQ27XXX_O_OTDC),
+	[BQ27742]   = BQ27XXX_DATA(bq27742,   0         , BQ27XXX_O_OTDC),
+	[BQ27545]   = BQ27XXX_DATA(bq27545,   0x04143672, BQ27XXX_O_OTDC),
+	[BQ27421]   = BQ27XXX_DATA(bq27421,   0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
+	[BQ27425]   = BQ27XXX_DATA(bq27425,   0x04143672, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP),
+	[BQ27441]   = BQ27XXX_DATA(bq27441,   0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
+	[BQ27621]   = BQ27XXX_DATA(bq27621,   0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
 };
 
 static DEFINE_MUTEX(bq27xxx_list_lock);
@@ -805,13 +771,6 @@ static LIST_HEAD(bq27xxx_battery_devices);
 
 #define BQ27XXX_DM_SZ	32
 
-struct bq27xxx_dm_reg {
-	u8 subclass_id;
-	u8 offset;
-	u8 bytes;
-	u16 min, max;
-};
-
 /**
  * struct bq27xxx_dm_buf - chip data memory buffer
  * @class: data memory subclass_id
@@ -844,12 +803,6 @@ static inline u16 *bq27xxx_dm_reg_ptr(struct bq27xxx_dm_buf *buf,
 	return NULL;
 }
 
-enum bq27xxx_dm_reg_id {
-	BQ27XXX_DM_DESIGN_CAPACITY = 0,
-	BQ27XXX_DM_DESIGN_ENERGY,
-	BQ27XXX_DM_TERMINATE_VOLTAGE,
-};
-
 static const char * const bq27xxx_dm_reg_name[] = {
 	[BQ27XXX_DM_DESIGN_CAPACITY] = "design-capacity",
 	[BQ27XXX_DM_DESIGN_ENERGY] = "design-energy",
@@ -1092,9 +1045,9 @@ static void bq27xxx_battery_update_dm_block(struct bq27xxx_device_info *di,
 	}
 
 #ifdef CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM
-	if (!di->ram_chip && !bq27xxx_dt_to_nvm) {
+	if (!(di->opts & BQ27XXX_O_RAM) && !bq27xxx_dt_to_nvm) {
 #else
-	if (!di->ram_chip) {
+	if (!(di->opts & BQ27XXX_O_RAM)) {
 #endif
 		/* devicetree and NVM differ; defer to NVM */
 		dev_warn(di->dev, "%s has %u; update to %u disallowed "
@@ -1130,7 +1083,7 @@ static int bq27xxx_battery_cfgupdate_priv(struct bq27xxx_device_info *di, bool a
 			return ret;
 	} while (!!(ret & BQ27XXX_FLAG_CFGUP) != active && --try);
 
-	if (!try) {
+	if (!try && di->chip != BQ27425) { // 425 has a bug
 		dev_err(di->dev, "timed out waiting for cfgupdate flag %d\n", active);
 		return -EINVAL;
 	}
@@ -1162,7 +1115,7 @@ static inline int bq27xxx_battery_soft_reset(struct bq27xxx_device_info *di)
 static int bq27xxx_battery_write_dm_block(struct bq27xxx_device_info *di,
 					  struct bq27xxx_dm_buf *buf)
 {
-	bool cfgup = di->chip == BQ27421; /* assume related chips need cfgupdate */
+	bool cfgup = di->opts & BQ27XXX_O_CFGUP;
 	int ret;
 
 	if (!buf->dirty)
@@ -1261,7 +1214,7 @@ static void bq27xxx_battery_set_config(struct bq27xxx_device_info *di,
 
 	bq27xxx_battery_seal(di);
 
-	if (updated && di->chip != BQ27421) { /* not a cfgupdate chip, so reset */
+	if (updated && !(di->opts & BQ27XXX_O_CFGUP)) {
 		bq27xxx_write(di, BQ27XXX_REG_CTRL, BQ27XXX_RESET, false);
 		BQ27XXX_MSLEEP(300); /* reset time is not documented */
 	}
@@ -1328,7 +1281,7 @@ static int bq27xxx_battery_read_soc(struct bq27xxx_device_info *di)
 {
 	int soc;
 
-	if (di->chip == BQ27000 || di->chip == BQ27010)
+	if (di->opts & BQ27XXX_O_ZERO)
 		soc = bq27xxx_read(di, BQ27XXX_REG_SOC, true);
 	else
 		soc = bq27xxx_read(di, BQ27XXX_REG_SOC, false);
@@ -1354,7 +1307,7 @@ static int bq27xxx_battery_read_charge(struct bq27xxx_device_info *di, u8 reg)
 		return charge;
 	}
 
-	if (di->chip == BQ27000 || di->chip == BQ27010)
+	if (di->opts & BQ27XXX_O_ZERO)
 		charge *= BQ27XXX_CURRENT_CONSTANT / BQ27XXX_RS;
 	else
 		charge *= 1000;
@@ -1370,7 +1323,7 @@ static inline int bq27xxx_battery_read_nac(struct bq27xxx_device_info *di)
 {
 	int flags;
 
-	if (di->chip == BQ27000 || di->chip == BQ27010) {
+	if (di->opts & BQ27XXX_O_ZERO) {
 		flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, true);
 		if (flags >= 0 && (flags & BQ27000_FLAG_CI))
 			return -ENODATA;
@@ -1396,7 +1349,7 @@ static int bq27xxx_battery_read_dcap(struct bq27xxx_device_info *di)
 {
 	int dcap;
 
-	if (di->chip == BQ27000 || di->chip == BQ27010)
+	if (di->opts & BQ27XXX_O_ZERO)
 		dcap = bq27xxx_read(di, BQ27XXX_REG_DCAP, true);
 	else
 		dcap = bq27xxx_read(di, BQ27XXX_REG_DCAP, false);
@@ -1406,7 +1359,7 @@ static int bq27xxx_battery_read_dcap(struct bq27xxx_device_info *di)
 		return dcap;
 	}
 
-	if (di->chip == BQ27000 || di->chip == BQ27010)
+	if (di->opts & BQ27XXX_O_ZERO)
 		dcap = (dcap << 8) * BQ27XXX_CURRENT_CONSTANT / BQ27XXX_RS;
 	else
 		dcap *= 1000;
@@ -1428,7 +1381,7 @@ static int bq27xxx_battery_read_energy(struct bq27xxx_device_info *di)
 		return ae;
 	}
 
-	if (di->chip == BQ27000 || di->chip == BQ27010)
+	if (di->opts & BQ27XXX_O_ZERO)
 		ae *= BQ27XXX_POWER_CONSTANT / BQ27XXX_RS;
 	else
 		ae *= 1000;
@@ -1450,7 +1403,7 @@ static int bq27xxx_battery_read_temperature(struct bq27xxx_device_info *di)
 		return temp;
 	}
 
-	if (di->chip == BQ27000 || di->chip == BQ27010)
+	if (di->opts & BQ27XXX_O_ZERO)
 		temp = 5 * temp / 2;
 
 	return temp;
@@ -1507,7 +1460,7 @@ static int bq27xxx_battery_read_pwr_avg(struct bq27xxx_device_info *di)
 		return tval;
 	}
 
-	if (di->chip == BQ27000 || di->chip == BQ27010)
+	if (di->opts & BQ27XXX_O_ZERO)
 		return (tval * BQ27XXX_POWER_CONSTANT) / BQ27XXX_RS;
 	else
 		return tval;
@@ -1518,26 +1471,12 @@ static int bq27xxx_battery_read_pwr_avg(struct bq27xxx_device_info *di)
  */
 static bool bq27xxx_battery_overtemp(struct bq27xxx_device_info *di, u16 flags)
 {
-	switch (di->chip) {
-	case BQ2750X:
-	case BQ2751X:
-	case BQ27500:
-	case BQ27510G1:
-	case BQ27510G2:
-	case BQ27510G3:
-	case BQ27520G1:
-	case BQ27520G2:
-	case BQ27520G3:
-	case BQ27520G4:
-	case BQ27541:
-	case BQ27545:
+	if (di->opts & BQ27XXX_O_OTDC)
 		return flags & (BQ27XXX_FLAG_OTC | BQ27XXX_FLAG_OTD);
-	case BQ27530:
-	case BQ27421:
+        if (di->opts & BQ27XXX_O_UTOT)
 		return flags & BQ27XXX_FLAG_OT;
-	default:
-		return false;
-	}
+
+	return false;
 }
 
 /*
@@ -1545,7 +1484,7 @@ static bool bq27xxx_battery_overtemp(struct bq27xxx_device_info *di, u16 flags)
  */
 static bool bq27xxx_battery_undertemp(struct bq27xxx_device_info *di, u16 flags)
 {
-	if (di->chip == BQ27530 || di->chip == BQ27421)
+	if (di->opts & BQ27XXX_O_UTOT)
 		return flags & BQ27XXX_FLAG_UT;
 
 	return false;
@@ -1556,7 +1495,7 @@ static bool bq27xxx_battery_undertemp(struct bq27xxx_device_info *di, u16 flags)
  */
 static bool bq27xxx_battery_dead(struct bq27xxx_device_info *di, u16 flags)
 {
-	if (di->chip == BQ27000 || di->chip == BQ27010)
+	if (di->opts & BQ27XXX_O_ZERO)
 		return flags & (BQ27000_FLAG_EDV1 | BQ27000_FLAG_EDVF);
 	else
 		return flags & (BQ27XXX_FLAG_SOC1 | BQ27XXX_FLAG_SOCF);
@@ -1569,7 +1508,7 @@ static bool bq27xxx_battery_dead(struct bq27xxx_device_info *di, u16 flags)
 static int bq27xxx_battery_read_health(struct bq27xxx_device_info *di)
 {
 	int flags;
-	bool has_singe_flag = di->chip == BQ27000 || di->chip == BQ27010;
+	bool has_singe_flag = di->opts & BQ27XXX_O_ZERO;
 
 	flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, has_singe_flag);
 	if (flags < 0) {
@@ -1591,8 +1530,8 @@ static int bq27xxx_battery_read_health(struct bq27xxx_device_info *di)
 void bq27xxx_battery_update(struct bq27xxx_device_info *di)
 {
 	struct bq27xxx_reg_cache cache = {0, };
-	bool has_ci_flag = di->chip == BQ27000 || di->chip == BQ27010;
-	bool has_singe_flag = di->chip == BQ27000 || di->chip == BQ27010;
+	bool has_ci_flag = di->opts & BQ27XXX_O_ZERO;
+	bool has_singe_flag = di->opts & BQ27XXX_O_ZERO;
 
 	cache.flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, has_singe_flag);
 	if ((cache.flags & 0xff) == 0xff)
@@ -1670,7 +1609,7 @@ static int bq27xxx_battery_current(struct bq27xxx_device_info *di,
 		return curr;
 	}
 
-	if (di->chip == BQ27000 || di->chip == BQ27010) {
+	if (di->opts & BQ27XXX_O_ZERO) {
 		flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, true);
 		if (flags & BQ27000_FLAG_CHGS) {
 			dev_dbg(di->dev, "negative current!\n");
@@ -1691,7 +1630,7 @@ static int bq27xxx_battery_status(struct bq27xxx_device_info *di,
 {
 	int status;
 
-	if (di->chip == BQ27000 || di->chip == BQ27010) {
+	if (di->opts & BQ27XXX_O_ZERO) {
 		if (di->cache.flags & BQ27000_FLAG_FC)
 			status = POWER_SUPPLY_STATUS_FULL;
 		else if (di->cache.flags & BQ27000_FLAG_CHGS)
@@ -1719,7 +1658,7 @@ static int bq27xxx_battery_capacity_level(struct bq27xxx_device_info *di,
 {
 	int level;
 
-	if (di->chip == BQ27000 || di->chip == BQ27010) {
+	if (di->opts & BQ27XXX_O_ZERO) {
 		if (di->cache.flags & BQ27000_FLAG_FC)
 			level = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
 		else if (di->cache.flags & BQ27000_FLAG_EDV1)
@@ -1884,7 +1823,11 @@ int bq27xxx_battery_setup(struct bq27xxx_device_info *di)
 
 	INIT_DELAYED_WORK(&di->work, bq27xxx_battery_poll);
 	mutex_init(&di->lock);
-	di->regs = bq27xxx_regs[di->chip];
+
+	di->regs       = bq27xxx_chip_data[di->chip].regs;
+	di->unseal_key = bq27xxx_chip_data[di->chip].unseal_key;
+	di->dm_regs    = bq27xxx_chip_data[di->chip].dm_regs;
+	di->opts       = bq27xxx_chip_data[di->chip].opts;
 
 	psy_desc = devm_kzalloc(di->dev, sizeof(*psy_desc), GFP_KERNEL);
 	if (!psy_desc)
@@ -1892,8 +1835,8 @@ int bq27xxx_battery_setup(struct bq27xxx_device_info *di)
 
 	psy_desc->name = di->name;
 	psy_desc->type = POWER_SUPPLY_TYPE_BATTERY;
-	psy_desc->properties = bq27xxx_battery_props[di->chip].props;
-	psy_desc->num_properties = bq27xxx_battery_props[di->chip].size;
+	psy_desc->properties = bq27xxx_chip_data[di->chip].props;
+	psy_desc->num_properties = bq27xxx_chip_data[di->chip].props_size;
 	psy_desc->get_property = bq27xxx_battery_get_property;
 	psy_desc->external_power_changed = bq27xxx_external_power_changed;
 
@@ -1903,8 +1846,6 @@ int bq27xxx_battery_setup(struct bq27xxx_device_info *di)
 		return PTR_ERR(di->bat);
 	}
 
-	dev_info(di->dev, "support ver. %s enabled\n", DRIVER_VERSION);
-
 	bq27xxx_battery_settings(di);
 	bq27xxx_battery_update(di);
 
@@ -1938,110 +1879,6 @@ void bq27xxx_battery_teardown(struct bq27xxx_device_info *di)
 }
 EXPORT_SYMBOL_GPL(bq27xxx_battery_teardown);
 
-static int bq27xxx_battery_platform_read(struct bq27xxx_device_info *di, u8 reg,
-					 bool single)
-{
-	struct device *dev = di->dev;
-	struct bq27xxx_platform_data *pdata = dev->platform_data;
-	unsigned int timeout = 3;
-	int upper, lower;
-	int temp;
-
-	if (!single) {
-		/* Make sure the value has not changed in between reading the
-		 * lower and the upper part */
-		upper = pdata->read(dev, reg + 1);
-		do {
-			temp = upper;
-			if (upper < 0)
-				return upper;
-
-			lower = pdata->read(dev, reg);
-			if (lower < 0)
-				return lower;
-
-			upper = pdata->read(dev, reg + 1);
-		} while (temp != upper && --timeout);
-
-		if (timeout == 0)
-			return -EIO;
-
-		return (upper << 8) | lower;
-	}
-
-	return pdata->read(dev, reg);
-}
-
-static int bq27xxx_battery_platform_probe(struct platform_device *pdev)
-{
-	struct bq27xxx_device_info *di;
-	struct bq27xxx_platform_data *pdata = pdev->dev.platform_data;
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "no platform_data supplied\n");
-		return -EINVAL;
-	}
-
-	if (!pdata->read) {
-		dev_err(&pdev->dev, "no hdq read callback supplied\n");
-		return -EINVAL;
-	}
-
-	if (!pdata->chip) {
-		dev_err(&pdev->dev, "no device supplied\n");
-		return -EINVAL;
-	}
-
-	di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
-	if (!di)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, di);
-
-	di->dev = &pdev->dev;
-	di->chip = pdata->chip;
-	di->name = pdata->name ?: dev_name(&pdev->dev);
-	di->bus.read = bq27xxx_battery_platform_read;
-
-	return bq27xxx_battery_setup(di);
-}
-
-static int bq27xxx_battery_platform_remove(struct platform_device *pdev)
-{
-	struct bq27xxx_device_info *di = platform_get_drvdata(pdev);
-
-	bq27xxx_battery_teardown(di);
-
-	return 0;
-}
-
-static const struct platform_device_id bq27xxx_battery_platform_id_table[] = {
-	{ "bq27000-battery", },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(platform, bq27xxx_battery_platform_id_table);
-
-#ifdef CONFIG_OF
-static const struct of_device_id bq27xxx_battery_platform_of_match_table[] = {
-	{ .compatible = "ti,bq27000" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, bq27xxx_battery_platform_of_match_table);
-#endif
-
-static struct platform_driver bq27xxx_battery_platform_driver = {
-	.probe	= bq27xxx_battery_platform_probe,
-	.remove = bq27xxx_battery_platform_remove,
-	.driver = {
-		.name = "bq27000-battery",
-		.of_match_table = of_match_ptr(bq27xxx_battery_platform_of_match_table),
-	},
-	.id_table = bq27xxx_battery_platform_id_table,
-};
-module_platform_driver(bq27xxx_battery_platform_driver);
-
-MODULE_ALIAS("platform:bq27000-battery");
-
 MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
 MODULE_DESCRIPTION("BQ27xxx battery monitor driver");
 MODULE_LICENSE("GPL");

drivers/power/supply/bq27xxx_battery_hdq.c

+/*
+ * BQ27xxx battery monitor HDQ/1-wire driver
+ *
+ * Copyright (C) 2007-2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/power/bq27xxx_battery.h>
+
+#include <linux/w1.h>
+
+#define W1_FAMILY_BQ27000	0x01
+
+#define HDQ_CMD_READ	(0 << 7)
+#define HDQ_CMD_WRITE	(1 << 7)
+
+static int F_ID;
+module_param(F_ID, int, S_IRUSR);
+MODULE_PARM_DESC(F_ID, "1-wire slave FID for BQ27xxx device");
+
+static int w1_bq27000_read(struct w1_slave *sl, unsigned int reg)
+{
+	u8 val;
+
+	mutex_lock(&sl->master->bus_mutex);
+	w1_write_8(sl->master, HDQ_CMD_READ | reg);
+	val = w1_read_8(sl->master);
+	mutex_unlock(&sl->master->bus_mutex);
+
+	return val;
+}
+
+static int bq27xxx_battery_hdq_read(struct bq27xxx_device_info *di, u8 reg,
+				    bool single)
+{
+	struct w1_slave *sl = dev_to_w1_slave(di->dev);
+	unsigned int timeout = 3;
+	int upper, lower;
+	int temp;
+
+	if (!single) {
+		/*
+		 * Make sure the value has not changed in between reading the
+		 * lower and the upper part
+		 */
+		upper = w1_bq27000_read(sl, reg + 1);
+		do {
+			temp = upper;
+			if (upper < 0)
+				return upper;
+
+			lower = w1_bq27000_read(sl, reg);
+			if (lower < 0)
+				return lower;
+
+			upper = w1_bq27000_read(sl, reg + 1);
+		} while (temp != upper && --timeout);
+
+		if (timeout == 0)
+			return -EIO;
+
+		return (upper << 8) | lower;
+	}
+
+	return w1_bq27000_read(sl, reg);
+}
+
+static int bq27xxx_battery_hdq_add_slave(struct w1_slave *sl)
+{
+	struct bq27xxx_device_info *di;
+
+	di = devm_kzalloc(&sl->dev, sizeof(*di), GFP_KERNEL);
+	if (!di)
+		return -ENOMEM;
+
+	dev_set_drvdata(&sl->dev, di);
+
+	di->dev = &sl->dev;
+	di->chip = BQ27000;
+	di->name = "bq27000-battery";
+	di->bus.read = bq27xxx_battery_hdq_read;
+
+	return bq27xxx_battery_setup(di);
+}
+
+static void bq27xxx_battery_hdq_remove_slave(struct w1_slave *sl)
+{
+	struct bq27xxx_device_info *di = dev_get_drvdata(&sl->dev);
+
+	bq27xxx_battery_teardown(di);
+}
+
+static struct w1_family_ops bq27xxx_battery_hdq_fops = {
+	.add_slave	= bq27xxx_battery_hdq_add_slave,
+	.remove_slave	= bq27xxx_battery_hdq_remove_slave,
+};
+
+static struct w1_family bq27xxx_battery_hdq_family = {
+	.fid = W1_FAMILY_BQ27000,
+	.fops = &bq27xxx_battery_hdq_fops,
+};
+
+static int __init bq27xxx_battery_hdq_init(void)
+{
+	if (F_ID)
+		bq27xxx_battery_hdq_family.fid = F_ID;
+
+	return w1_register_family(&bq27xxx_battery_hdq_family);
+}
+module_init(bq27xxx_battery_hdq_init);
+
+static void __exit bq27xxx_battery_hdq_exit(void)
+{
+	w1_unregister_family(&bq27xxx_battery_hdq_family);
+}
+module_exit(bq27xxx_battery_hdq_exit);
+
+MODULE_AUTHOR("Texas Instruments Ltd");
+MODULE_DESCRIPTION("BQ27xxx battery monitor HDQ/1-wire driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_BQ27000));

drivers/power/supply/bq27xxx_battery_i2c.c

@@ -230,7 +230,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
 	{ "bq27210", BQ27010 },
 	{ "bq27500", BQ2750X },
 	{ "bq27510", BQ2751X },
-	{ "bq27520", BQ2751X },
+	{ "bq27520", BQ2752X },
 	{ "bq27500-1", BQ27500 },
 	{ "bq27510g1", BQ27510G1 },
 	{ "bq27510g2", BQ27510G2 },
@@ -240,16 +240,16 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
 	{ "bq27520g3", BQ27520G3 },
 	{ "bq27520g4", BQ27520G4 },
 	{ "bq27530", BQ27530 },
-	{ "bq27531", BQ27530 },
+	{ "bq27531", BQ27531 },
 	{ "bq27541", BQ27541 },
-	{ "bq27542", BQ27541 },
-	{ "bq27546", BQ27541 },
-	{ "bq27742", BQ27541 },
+	{ "bq27542", BQ27542 },
+	{ "bq27546", BQ27546 },
+	{ "bq27742", BQ27742 },
 	{ "bq27545", BQ27545 },
 	{ "bq27421", BQ27421 },
-	{ "bq27425", BQ27421 },
-	{ "bq27441", BQ27421 },
-	{ "bq27621", BQ27421 },
+	{ "bq27425", BQ27425 },
+	{ "bq27441", BQ27441 },
+	{ "bq27621", BQ27621 },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table);

drivers/power/supply/charger-manager.c

@@ -1632,8 +1632,7 @@ static int charger_manager_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	cm = devm_kzalloc(&pdev->dev,
-			sizeof(struct charger_manager),	GFP_KERNEL);
+	cm = devm_kzalloc(&pdev->dev, sizeof(*cm), GFP_KERNEL);
 	if (!cm)
 		return -ENOMEM;
 
@@ -1645,12 +1644,14 @@ static int charger_manager_probe(struct platform_device *pdev)
 	/* Initialize alarm timer */
 	if (alarmtimer_get_rtcdev()) {
 		cm_timer = devm_kzalloc(cm->dev, sizeof(*cm_timer), GFP_KERNEL);
+		if (!cm_timer)
+			return -ENOMEM;
 		alarm_init(cm_timer, ALARM_BOOTTIME, cm_timer_func);
 	}
 
 	/*
-	 * The following two do not need to be errors.
-	 * Users may intentionally ignore those two features.
+	 * Some of the following do not need to be errors.
+	 * Users may intentionally ignore those features.
 	 */
 	if (desc->fullbatt_uV == 0) {
 		dev_info(&pdev->dev, "Ignoring full-battery voltage threshold as it is not supplied\n");

drivers/power/supply/ds2780_battery.c

@@ -663,7 +663,7 @@ static ssize_t ds2780_write_param_eeprom_bin(struct file *filp,
 	return count;
 }
 
-static struct bin_attribute ds2780_param_eeprom_bin_attr = {
+static const struct bin_attribute ds2780_param_eeprom_bin_attr = {
 	.attr = {
 		.name = "param_eeprom",
 		.mode = S_IRUGO | S_IWUSR,
@@ -708,7 +708,7 @@ static ssize_t ds2780_write_user_eeprom_bin(struct file *filp,
 	return count;
 }
 
-static struct bin_attribute ds2780_user_eeprom_bin_attr = {
+static const struct bin_attribute ds2780_user_eeprom_bin_attr = {
 	.attr = {
 		.name = "user_eeprom",
 		.mode = S_IRUGO | S_IWUSR,

drivers/power/supply/ds2781_battery.c

@@ -665,7 +665,7 @@ static ssize_t ds2781_write_param_eeprom_bin(struct file *filp,
 	return count;
 }
 
-static struct bin_attribute ds2781_param_eeprom_bin_attr = {
+static const struct bin_attribute ds2781_param_eeprom_bin_attr = {
 	.attr = {
 		.name = "param_eeprom",
 		.mode = S_IRUGO | S_IWUSR,
@@ -711,7 +711,7 @@ static ssize_t ds2781_write_user_eeprom_bin(struct file *filp,
 	return count;
 }
 
-static struct bin_attribute ds2781_user_eeprom_bin_attr = {
+static const struct bin_attribute ds2781_user_eeprom_bin_attr = {
 	.attr = {
 		.name = "user_eeprom",
 		.mode = S_IRUGO | S_IWUSR,

drivers/power/supply/lp8788-charger.c

@@ -626,7 +626,7 @@ static ssize_t lp8788_show_charger_status(struct device *dev,
 {
 	struct lp8788_charger *pchg = dev_get_drvdata(dev);
 	enum lp8788_charging_state state;
-	char *desc[LP8788_MAX_CHG_STATE] = {
+	static const char * const desc[LP8788_MAX_CHG_STATE] = {
 		[LP8788_OFF] = "CHARGER OFF",
 		[LP8788_WARM_UP] = "WARM UP",
 		[LP8788_LOW_INPUT] = "LOW INPUT STATE",
@@ -650,8 +650,10 @@ static ssize_t lp8788_show_eoc_time(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
 	struct lp8788_charger *pchg = dev_get_drvdata(dev);
-	char *stime[] = { "400ms", "5min", "10min", "15min",
-			"20min", "25min", "30min", "No timeout" };
+	static const char * const stime[] = {
+		"400ms", "5min", "10min", "15min",
+		"20min", "25min", "30min", "No timeout"
+	};
 	u8 val;
 
 	lp8788_read_byte(pchg->lp, LP8788_CHG_EOC, &val);
@@ -665,9 +667,13 @@ static ssize_t lp8788_show_eoc_level(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
 	struct lp8788_charger *pchg = dev_get_drvdata(dev);
-	char *abs_level[] = { "25mA", "49mA", "75mA", "98mA" };
-	char *relative_level[] = { "5%", "10%", "15%", "20%" };
-	char *level;
+	static const char * const abs_level[] = {
+			"25mA", "49mA", "75mA", "98mA"
+	};
+	static const char * const relative_level[] = {
+			"5%", "10%", "15%", "20%"
+	};
+	const char *level;
 	u8 val;
 	u8 mode;
 

drivers/power/supply/ltc2941-battery-gauge.c

 /*
- * I2C client/driver for the Linear Technology LTC2941 and LTC2943
- * Battery Gas Gauge IC
+ * I2C client/driver for the Linear Technology LTC2941, LTC2942, LTC2943
+ * and LTC2944 Battery Gas Gauge IC
  *
  * Copyright (C) 2014 Topic Embedded Systems
  *
@@ -34,35 +34,39 @@ enum ltc294x_reg {
 	LTC294X_REG_CONTROL		= 0x01,
 	LTC294X_REG_ACC_CHARGE_MSB	= 0x02,
 	LTC294X_REG_ACC_CHARGE_LSB	= 0x03,
-	LTC294X_REG_THRESH_HIGH_MSB	= 0x04,
-	LTC294X_REG_THRESH_HIGH_LSB	= 0x05,
-	LTC294X_REG_THRESH_LOW_MSB	= 0x06,
-	LTC294X_REG_THRESH_LOW_LSB	= 0x07,
-	LTC294X_REG_VOLTAGE_MSB	= 0x08,
-	LTC294X_REG_VOLTAGE_LSB	= 0x09,
-	LTC294X_REG_CURRENT_MSB	= 0x0E,
-	LTC294X_REG_CURRENT_LSB	= 0x0F,
-	LTC294X_REG_TEMPERATURE_MSB	= 0x14,
-	LTC294X_REG_TEMPERATURE_LSB	= 0x15,
+	LTC294X_REG_VOLTAGE_MSB		= 0x08,
+	LTC294X_REG_VOLTAGE_LSB		= 0x09,
+	LTC2942_REG_TEMPERATURE_MSB	= 0x0C,
+	LTC2942_REG_TEMPERATURE_LSB	= 0x0D,
+	LTC2943_REG_CURRENT_MSB		= 0x0E,
+	LTC2943_REG_CURRENT_LSB		= 0x0F,
+	LTC2943_REG_TEMPERATURE_MSB	= 0x14,
+	LTC2943_REG_TEMPERATURE_LSB	= 0x15,
 };
 
-#define LTC2943_REG_CONTROL_MODE_MASK (BIT(7) | BIT(6))
-#define LTC2943_REG_CONTROL_MODE_SCAN BIT(7)
+enum ltc294x_id {
+	LTC2941_ID,
+	LTC2942_ID,
+	LTC2943_ID,
+	LTC2944_ID,
+};
+
+#define LTC2941_REG_STATUS_CHIP_ID	BIT(7)
+
+#define LTC2942_REG_CONTROL_MODE_SCAN	(BIT(7) | BIT(6))
+#define LTC2943_REG_CONTROL_MODE_SCAN	BIT(7)
 #define LTC294X_REG_CONTROL_PRESCALER_MASK	(BIT(5) | BIT(4) | BIT(3))
 #define LTC294X_REG_CONTROL_SHUTDOWN_MASK	(BIT(0))
 #define LTC294X_REG_CONTROL_PRESCALER_SET(x) \
 	((x << 3) & LTC294X_REG_CONTROL_PRESCALER_MASK)
 #define LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED	0
 
-#define LTC2941_NUM_REGS	0x08
-#define LTC2943_NUM_REGS	0x18
-
 struct ltc294x_info {
 	struct i2c_client *client;	/* I2C Client pointer */
 	struct power_supply *supply;	/* Supply pointer */
 	struct power_supply_desc supply_desc;	/* Supply description */
 	struct delayed_work work;	/* Work scheduler */
-	unsigned long num_regs;	/* Number of registers (chip type) */
+	enum ltc294x_id id;		/* Chip type */
 	int charge;	/* Last charge register content */
 	int r_sense;	/* mOhm */
 	int Qlsb;	/* nAh */
@@ -145,9 +149,18 @@ static int ltc294x_reset(const struct ltc294x_info *info, int prescaler_exp)
 
 	control = LTC294X_REG_CONTROL_PRESCALER_SET(prescaler_exp) |
 				LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED;
-	/* Put the 2943 into "monitor" mode, so it measures every 10 sec */
-	if (info->num_regs == LTC2943_NUM_REGS)
+	/* Put device into "monitor" mode */
+	switch (info->id) {
+	case LTC2942_ID:	/* 2942 measures every 2 sec */
+		control |= LTC2942_REG_CONTROL_MODE_SCAN;
+		break;
+	case LTC2943_ID:
+	case LTC2944_ID:	/* 2943 and 2944 measure every 10 sec */
 		control |= LTC2943_REG_CONTROL_MODE_SCAN;
+		break;
+	default:
+		break;
+	}
 
 	if (value != control) {
 		ret = ltc294x_write_regs(info->client,
@@ -252,7 +265,24 @@ static int ltc294x_get_voltage(const struct ltc294x_info *info, int *val)
 	ret = ltc294x_read_regs(info->client,
 		LTC294X_REG_VOLTAGE_MSB, &datar[0], 2);
 	value = (datar[0] << 8) | datar[1];
-	*val = ((value * 23600) / 0xFFFF) * 1000; /* in uV */
+	switch (info->id) {
+	case LTC2943_ID:
+		value *= 23600 * 2;
+		value /= 0xFFFF;
+		value *= 1000 / 2;
+		break;
+	case LTC2944_ID:
+		value *= 70800 / 5*4;
+		value /= 0xFFFF;
+		value *= 1000 * 5/4;
+		break;
+	default:
+		value *= 6000 * 10;
+		value /= 0xFFFF;
+		value *= 1000 / 10;
+		break;
+	}
+	*val = value;
 	return ret;
 }
 
@@ -263,27 +293,38 @@ static int ltc294x_get_current(const struct ltc294x_info *info, int *val)
 	s32 value;
 
 	ret = ltc294x_read_regs(info->client,
-		LTC294X_REG_CURRENT_MSB, &datar[0], 2);
+		LTC2943_REG_CURRENT_MSB, &datar[0], 2);
 	value = (datar[0] << 8) | datar[1];
 	value -= 0x7FFF;
+	if (info->id == LTC2944_ID)
+		value *= 64000;
+	else
+		value *= 60000;
 	/* Value is in range -32k..+32k, r_sense is usually 10..50 mOhm,
 	 * the formula below keeps everything in s32 range while preserving
 	 * enough digits */
-	*val = 1000 * ((60000 * value) / (info->r_sense * 0x7FFF)); /* in uA */
+	*val = 1000 * (value / (info->r_sense * 0x7FFF)); /* in uA */
 	return ret;
 }
 
 static int ltc294x_get_temperature(const struct ltc294x_info *info, int *val)
 {
+	enum ltc294x_reg reg;
 	int ret;
 	u8 datar[2];
 	u32 value;
 
-	ret = ltc294x_read_regs(info->client,
-		LTC294X_REG_TEMPERATURE_MSB, &datar[0], 2);
-	value = (datar[0] << 8) | datar[1];
-	/* Full-scale is 510 Kelvin, convert to centidegrees  */
-	*val = (((51000 * value) / 0xFFFF) - 27215);
+	if (info->id == LTC2942_ID) {
+		reg = LTC2942_REG_TEMPERATURE_MSB;
+		value = 60000;	/* Full-scale is 600 Kelvin */
+	} else {
+		reg = LTC2943_REG_TEMPERATURE_MSB;
+		value = 51000;	/* Full-scale is 510 Kelvin */
+	}
+	ret = ltc294x_read_regs(info->client, reg, &datar[0], 2);
+	value *= (datar[0] << 8) | datar[1];
+	/* Convert to centidegrees  */
+	*val = value / 0xFFFF - 27215;
 	return ret;
 }
 
@@ -357,8 +398,8 @@ static enum power_supply_property ltc294x_properties[] = {
 	POWER_SUPPLY_PROP_CHARGE_COUNTER,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
-	POWER_SUPPLY_PROP_CURRENT_NOW,
 	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
 };
 
 static int ltc294x_i2c_remove(struct i2c_client *client)
@@ -375,10 +416,11 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
 {
 	struct power_supply_config psy_cfg = {};
 	struct ltc294x_info *info;
+	struct device_node *np;
 	int ret;
 	u32 prescaler_exp;
 	s32 r_sense;
-	struct device_node *np;
+	u8 status;
 
 	info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL);
 	if (info == NULL)
@@ -388,7 +430,7 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
 
 	np = of_node_get(client->dev.of_node);
 
-	info->num_regs = (unsigned long)of_device_get_match_data(&client->dev);
+	info->id = (enum ltc294x_id)of_device_get_match_data(&client->dev);
 	info->supply_desc.name = np->name;
 
 	/* r_sense can be negative, when sense+ is connected to the battery
@@ -409,7 +451,7 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
 		prescaler_exp = LTC2941_MAX_PRESCALER_EXP;
 	}
 
-	if (info->num_regs == LTC2943_NUM_REGS) {
+	if (info->id == LTC2943_ID) {
 		if (prescaler_exp > LTC2943_MAX_PRESCALER_EXP)
 			prescaler_exp = LTC2943_MAX_PRESCALER_EXP;
 		info->Qlsb = ((340 * 50000) / r_sense) /
@@ -421,21 +463,39 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
 				(128 / (1 << prescaler_exp));
 	}
 
+	/* Read status register to check for LTC2942 */
+	if (info->id == LTC2941_ID || info->id == LTC2942_ID) {
+		ret = ltc294x_read_regs(client, LTC294X_REG_STATUS, &status, 1);
+		if (ret < 0) {
+			dev_err(&client->dev,
+				"Could not read status register\n");
+			return ret;
+		}
+		if (status & LTC2941_REG_STATUS_CHIP_ID)
+			info->id = LTC2941_ID;
+		else
+			info->id = LTC2942_ID;
+	}
+
 	info->client = client;
 	info->supply_desc.type = POWER_SUPPLY_TYPE_BATTERY;
 	info->supply_desc.properties = ltc294x_properties;
-	if (info->num_regs >= LTC294X_REG_TEMPERATURE_LSB)
+	switch (info->id) {
+	case LTC2944_ID:
+	case LTC2943_ID:
 		info->supply_desc.num_properties =
 			ARRAY_SIZE(ltc294x_properties);
-	else if (info->num_regs >= LTC294X_REG_CURRENT_LSB)
+		break;
+	case LTC2942_ID:
 		info->supply_desc.num_properties =
 			ARRAY_SIZE(ltc294x_properties) - 1;
-	else if (info->num_regs >= LTC294X_REG_VOLTAGE_LSB)
-		info->supply_desc.num_properties =
-			ARRAY_SIZE(ltc294x_properties) - 2;
-	else
+		break;
+	case LTC2941_ID:
+	default:
 		info->supply_desc.num_properties =
 			ARRAY_SIZE(ltc294x_properties) - 3;
+		break;
+	}
 	info->supply_desc.get_property = ltc294x_get_property;
 	info->supply_desc.set_property = ltc294x_set_property;
 	info->supply_desc.property_is_writeable = ltc294x_property_is_writeable;
@@ -492,8 +552,10 @@ static SIMPLE_DEV_PM_OPS(ltc294x_pm_ops, ltc294x_suspend, ltc294x_resume);
 
 
 static const struct i2c_device_id ltc294x_i2c_id[] = {
-	{"ltc2941", LTC2941_NUM_REGS},
-	{"ltc2943", LTC2943_NUM_REGS},
+	{ "ltc2941", LTC2941_ID, },
+	{ "ltc2942", LTC2942_ID, },
+	{ "ltc2943", LTC2943_ID, },
+	{ "ltc2944", LTC2944_ID, },
 	{ },
 };
 MODULE_DEVICE_TABLE(i2c, ltc294x_i2c_id);
@@ -501,11 +563,19 @@ MODULE_DEVICE_TABLE(i2c, ltc294x_i2c_id);
 static const struct of_device_id ltc294x_i2c_of_match[] = {
 	{
 		.compatible = "lltc,ltc2941",
-		.data = (void *)LTC2941_NUM_REGS
+		.data = (void *)LTC2941_ID,
+	},
+	{
+		.compatible = "lltc,ltc2942",
+		.data = (void *)LTC2942_ID,
 	},
 	{
 		.compatible = "lltc,ltc2943",
-		.data = (void *)LTC2943_NUM_REGS
+		.data = (void *)LTC2943_ID,
+	},
+	{
+		.compatible = "lltc,ltc2944",
+		.data = (void *)LTC2944_ID,
 	},
 	{ },
 };
@@ -525,5 +595,5 @@ module_i2c_driver(ltc294x_driver);
 
 MODULE_AUTHOR("Auryn Verwegen, Topic Embedded Systems");
 MODULE_AUTHOR("Mike Looijmans, Topic Embedded Products");
-MODULE_DESCRIPTION("LTC2941/LTC2943 Battery Gas Gauge IC driver");
+MODULE_DESCRIPTION("LTC2941/LTC2942/LTC2943/LTC2944 Battery Gas Gauge IC driver");
 MODULE_LICENSE("GPL");

drivers/power/supply/max17042_battery.c

@@ -22,6 +22,7 @@
  * This driver is based on max17040_battery.c
  */
 
+#include <linux/acpi.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -982,6 +983,8 @@ static int max17042_probe(struct i2c_client *client,
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
 	const struct power_supply_desc *max17042_desc = &max17042_psy_desc;
 	struct power_supply_config psy_cfg = {};
+	const struct acpi_device_id *acpi_id = NULL;
+	struct device *dev = &client->dev;
 	struct max17042_chip *chip;
 	int ret;
 	int i;
@@ -995,7 +998,15 @@ static int max17042_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	chip->client = client;
-	chip->chip_type = id->driver_data;
+	if (id) {
+		chip->chip_type = id->driver_data;
+	} else {
+		acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
+		if (!acpi_id)
+			return -ENODEV;
+
+		chip->chip_type = acpi_id->driver_data;
+	}
 	chip->regmap = devm_regmap_init_i2c(client, &max17042_regmap_config);
 	if (IS_ERR(chip->regmap)) {
 		dev_err(&client->dev, "Failed to initialize regmap\n");
@@ -1039,11 +1050,18 @@ static int max17042_probe(struct i2c_client *client,
 	}
 
 	if (client->irq) {
+		unsigned int flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
+
+		/*
+		 * On ACPI systems the IRQ may be handled by ACPI-event code,
+		 * so we need to share (if the ACPI code is willing to share).
+		 */
+		if (acpi_id)
+			flags |= IRQF_SHARED | IRQF_PROBE_SHARED;
+
 		ret = devm_request_threaded_irq(&client->dev, client->irq,
 						NULL,
-						max17042_thread_handler,
-						IRQF_TRIGGER_FALLING |
-						IRQF_ONESHOT,
+						max17042_thread_handler, flags,
 						chip->battery->desc->name,
 						chip);
 		if (!ret) {
@@ -1053,10 +1071,13 @@ static int max17042_probe(struct i2c_client *client,
 			max17042_set_soc_threshold(chip, 1);
 		} else {
 			client->irq = 0;
-			dev_err(&client->dev, "%s(): cannot get IRQ\n",
-				__func__);
+			if (ret != -EBUSY)
+				dev_err(&client->dev, "Failed to get IRQ\n");
 		}
 	}
+	/* Not able to update the charge threshold when exceeded? -> disable */
+	if (!client->irq)
+		regmap_write(chip->regmap, MAX17042_SALRT_Th, 0xff00);
 
 	regmap_read(chip->regmap, MAX17042_STATUS, &val);
 	if (val & STATUS_POR_BIT) {
@@ -1104,6 +1125,14 @@ static int max17042_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(max17042_pm_ops, max17042_suspend,
 			max17042_resume);
 
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id max17042_acpi_match[] = {
+	{ "MAX17047", MAXIM_DEVICE_TYPE_MAX17047 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, max17042_acpi_match);
+#endif
+
 #ifdef CONFIG_OF
 static const struct of_device_id max17042_dt_match[] = {
 	{ .compatible = "maxim,max17042" },
@@ -1125,6 +1154,7 @@ MODULE_DEVICE_TABLE(i2c, max17042_id);
 static struct i2c_driver max17042_i2c_driver = {
 	.driver	= {
 		.name	= "max17042",
+		.acpi_match_table = ACPI_PTR(max17042_acpi_match),
 		.of_match_table = of_match_ptr(max17042_dt_match),
 		.pm	= &max17042_pm_ops,
 	},

drivers/power/supply/max1721x_battery.c

+/*
+ * 1-Wire implementation for Maxim Semiconductor
+ * MAX7211/MAX17215 stanalone fuel gauge chip
+ *
+ * Copyright (C) 2017 Radioavionica Corporation
+ * Author: Alex A. Mihaylov <minimumlaw@rambler.ru>
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/w1.h>
+#include <linux/regmap.h>
+#include <linux/power_supply.h>
+
+#define W1_MAX1721X_FAMILY_ID		0x26
+#define DEF_DEV_NAME_MAX17211		"MAX17211"
+#define DEF_DEV_NAME_MAX17215		"MAX17215"
+#define DEF_DEV_NAME_UNKNOWN		"UNKNOWN"
+#define DEF_MFG_NAME			"MAXIM"
+
+#define PSY_MAX_NAME_LEN	32
+
+/* Number of valid register addresses in W1 mode */
+#define MAX1721X_MAX_REG_NR	0x1EF
+
+/* Factory settings (nonvilatile registers) (W1 specific) */
+#define MAX1721X_REG_NRSENSE	0x1CF	/* RSense in 10^-5 Ohm */
+/* Strings */
+#define MAX1721X_REG_MFG_STR	0x1CC
+#define MAX1721X_REG_MFG_NUMB	3
+#define MAX1721X_REG_DEV_STR	0x1DB
+#define MAX1721X_REG_DEV_NUMB	5
+/* HEX Strings */
+#define MAX1721X_REG_SER_HEX	0x1D8
+
+/* MAX172XX Output Registers for W1 chips */
+#define MAX172XX_REG_STATUS	0x000	/* status reg */
+#define MAX172XX_BAT_PRESENT	(1<<4)	/* battery connected bit */
+#define MAX172XX_REG_DEVNAME	0x021	/* chip config */
+#define MAX172XX_DEV_MASK	0x000F	/* chip type mask */
+#define MAX172X1_DEV		0x0001
+#define MAX172X5_DEV		0x0005
+#define MAX172XX_REG_TEMP	0x008	/* Temperature */
+#define MAX172XX_REG_BATT	0x0DA	/* Battery voltage */
+#define MAX172XX_REG_CURRENT	0x00A	/* Actual current */
+#define MAX172XX_REG_AVGCURRENT	0x00B	/* Average current */
+#define MAX172XX_REG_REPSOC	0x006	/* Percentage of charge */
+#define MAX172XX_REG_DESIGNCAP	0x018	/* Design capacity */
+#define MAX172XX_REG_REPCAP	0x005	/* Average capacity */
+#define MAX172XX_REG_TTE	0x011	/* Time to empty */
+#define MAX172XX_REG_TTF	0x020	/* Time to full */
+
+struct max17211_device_info {
+	char name[PSY_MAX_NAME_LEN];
+	struct power_supply *bat;
+	struct power_supply_desc bat_desc;
+	struct device *w1_dev;
+	struct regmap *regmap;
+	/* battery design format */
+	unsigned int rsense; /* in tenths uOhm */
+	char DeviceName[2 * MAX1721X_REG_DEV_NUMB + 1];
+	char ManufacturerName[2 * MAX1721X_REG_MFG_NUMB + 1];
+	char SerialNumber[13]; /* see get_sn_str() later for comment */
+};
+
+/* Convert regs value to power_supply units */
+
+static inline int max172xx_time_to_ps(unsigned int reg)
+{
+	return reg * 5625 / 1000;	/* in sec. */
+}
+
+static inline int max172xx_percent_to_ps(unsigned int reg)
+{
+	return reg / 256;	/* in percent from 0 to 100 */
+}
+
+static inline int max172xx_voltage_to_ps(unsigned int reg)
+{
+	return reg * 1250;	/* in uV */
+}
+
+static inline int max172xx_capacity_to_ps(unsigned int reg)
+{
+	return reg * 500;	/* in uAh */
+}
+
+/*
+ * Current and temperature is signed values, so unsigned regs
+ * value must be converted to signed type
+ */
+
+static inline int max172xx_temperature_to_ps(unsigned int reg)
+{
+	int val = (int16_t)(reg);
+
+	return val * 10 / 256; /* in tenths of deg. C */
+}
+
+/*
+ * Calculating current registers resolution:
+ *
+ * RSense stored in 10^-5 Ohm, so mesaurment voltage must be
+ * in 10^-11 Volts for get current in uA.
+ * 16 bit current reg fullscale +/-51.2mV is 102400 uV.
+ * So: 102400 / 65535 * 10^5 = 156252
+ */
+static inline int max172xx_current_to_voltage(unsigned int reg)
+{
+	int val = (int16_t)(reg);
+
+	return val * 156252;
+}
+
+
+static inline struct max17211_device_info *
+to_device_info(struct power_supply *psy)
+{
+	return power_supply_get_drvdata(psy);
+}
+
+static int max1721x_battery_get_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	struct max17211_device_info *info = to_device_info(psy);
+	unsigned int reg = 0;
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+		/*
+		 * POWER_SUPPLY_PROP_PRESENT will always readable via
+		 * sysfs interface. Value return 0 if battery not
+		 * present or unaccesable via W1.
+		 */
+		val->intval =
+			regmap_read(info->regmap, MAX172XX_REG_STATUS,
+			&reg) ? 0 : !(reg & MAX172XX_BAT_PRESENT);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = regmap_read(info->regmap, MAX172XX_REG_REPSOC, &reg);
+		val->intval = max172xx_percent_to_ps(reg);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = regmap_read(info->regmap, MAX172XX_REG_BATT, &reg);
+		val->intval = max172xx_voltage_to_ps(reg);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		ret = regmap_read(info->regmap, MAX172XX_REG_DESIGNCAP, &reg);
+		val->intval = max172xx_capacity_to_ps(reg);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_AVG:
+		ret = regmap_read(info->regmap, MAX172XX_REG_REPCAP, &reg);
+		val->intval = max172xx_capacity_to_ps(reg);
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+		ret = regmap_read(info->regmap, MAX172XX_REG_TTE, &reg);
+		val->intval = max172xx_time_to_ps(reg);
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
+		ret = regmap_read(info->regmap, MAX172XX_REG_TTF, &reg);
+		val->intval = max172xx_time_to_ps(reg);
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = regmap_read(info->regmap, MAX172XX_REG_TEMP, &reg);
+		val->intval = max172xx_temperature_to_ps(reg);
+		break;
+	/* We need signed current, so must cast info->rsense to signed type */
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = regmap_read(info->regmap, MAX172XX_REG_CURRENT, &reg);
+		val->intval =
+			max172xx_current_to_voltage(reg) / (int)info->rsense;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		ret = regmap_read(info->regmap, MAX172XX_REG_AVGCURRENT, &reg);
+		val->intval =
+			max172xx_current_to_voltage(reg) / (int)info->rsense;
+		break;
+	/*
+	 * Strings already received and inited by probe.
+	 * We do dummy read for check battery still available.
+	 */
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		ret = regmap_read(info->regmap, MAX1721X_REG_DEV_STR, &reg);
+		val->strval = info->DeviceName;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		ret = regmap_read(info->regmap, MAX1721X_REG_MFG_STR, &reg);
+		val->strval = info->ManufacturerName;
+		break;
+	case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+		ret = regmap_read(info->regmap, MAX1721X_REG_SER_HEX, &reg);
+		val->strval = info->SerialNumber;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property max1721x_battery_props[] = {
+	/* int */
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	/* strings */
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+};
+
+static int get_string(struct max17211_device_info *info,
+			uint16_t reg, uint8_t nr, char *str)
+{
+	unsigned int val;
+
+	if (!str || !(reg == MAX1721X_REG_MFG_STR ||
+			reg == MAX1721X_REG_DEV_STR))
+		return -EFAULT;
+
+	while (nr--) {
+		if (regmap_read(info->regmap, reg++, &val))
+			return -EFAULT;
+		*str++ = val>>8 & 0x00FF;
+		*str++ = val & 0x00FF;
+	}
+	return 0;
+}
+
+/* Maxim say: Serial number is a hex string up to 12 hex characters */
+static int get_sn_string(struct max17211_device_info *info, char *str)
+{
+	unsigned int val[3];
+
+	if (!str)
+		return -EFAULT;
+
+	if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX, &val[0]))
+		return -EFAULT;
+	if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX + 1, &val[1]))
+		return -EFAULT;
+	if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX + 2, &val[2]))
+		return -EFAULT;
+
+	snprintf(str, 13, "%04X%04X%04X", val[0], val[1], val[2]);
+	return 0;
+}
+
+/*
+ * MAX1721x registers description for w1-regmap
+ */
+static const struct regmap_range max1721x_allow_range[] = {
+	regmap_reg_range(0, 0xDF),	/* volatile data */
+	regmap_reg_range(0x180, 0x1DF),	/* non-volatile memory */
+	regmap_reg_range(0x1E0, 0x1EF),	/* non-volatile history (unused) */
+};
+
+static const struct regmap_range max1721x_deny_range[] = {
+	/* volatile data unused registers */
+	regmap_reg_range(0x24, 0x26),
+	regmap_reg_range(0x30, 0x31),
+	regmap_reg_range(0x33, 0x34),
+	regmap_reg_range(0x37, 0x37),
+	regmap_reg_range(0x3B, 0x3C),
+	regmap_reg_range(0x40, 0x41),
+	regmap_reg_range(0x43, 0x44),
+	regmap_reg_range(0x47, 0x49),
+	regmap_reg_range(0x4B, 0x4C),
+	regmap_reg_range(0x4E, 0xAF),
+	regmap_reg_range(0xB1, 0xB3),
+	regmap_reg_range(0xB5, 0xB7),
+	regmap_reg_range(0xBF, 0xD0),
+	regmap_reg_range(0xDB, 0xDB),
+	/* hole between volatile and non-volatile registers */
+	regmap_reg_range(0xE0, 0x17F),
+};
+
+static const struct regmap_access_table max1721x_regs = {
+	.yes_ranges	= max1721x_allow_range,
+	.n_yes_ranges	= ARRAY_SIZE(max1721x_allow_range),
+	.no_ranges	= max1721x_deny_range,
+	.n_no_ranges	= ARRAY_SIZE(max1721x_deny_range),
+};
+
+/*
+ * Model Gauge M5 Algorithm output register
+ * Volatile data (must not be cached)
+ */
+static const struct regmap_range max1721x_volatile_allow[] = {
+	regmap_reg_range(0, 0xDF),
+};
+
+static const struct regmap_access_table max1721x_volatile_regs = {
+	.yes_ranges	= max1721x_volatile_allow,
+	.n_yes_ranges	= ARRAY_SIZE(max1721x_volatile_allow),
+};
+
+/*
+ * W1-regmap config
+ */
+static const struct regmap_config max1721x_regmap_w1_config = {
+	.reg_bits = 16,
+	.val_bits = 16,
+	.rd_table = &max1721x_regs,
+	.volatile_table = &max1721x_volatile_regs,
+	.max_register = MAX1721X_MAX_REG_NR,
+};
+
+static int devm_w1_max1721x_add_device(struct w1_slave *sl)
+{
+	struct power_supply_config psy_cfg = {};
+	struct max17211_device_info *info;
+
+	info = devm_kzalloc(&sl->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	sl->family_data = (void *)info;
+	info->w1_dev = &sl->dev;
+
+	/*
+	 * power_supply class battery name translated from W1 slave device
+	 * unical ID (look like 26-0123456789AB) to "max1721x-0123456789AB\0"
+	 * so, 26 (device family) correcpondent to max1721x devices.
+	 * Device name still unical for any numbers connected devices.
+	 */
+	snprintf(info->name, sizeof(info->name),
+		"max1721x-%012X", (unsigned int)sl->reg_num.id);
+	info->bat_desc.name = info->name;
+
+	/*
+	 * FixMe: battery device name exceed max len for thermal_zone device
+	 * name and translation to thermal_zone must be disabled.
+	 */
+	info->bat_desc.no_thermal = true;
+	info->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+	info->bat_desc.properties = max1721x_battery_props;
+	info->bat_desc.num_properties = ARRAY_SIZE(max1721x_battery_props);
+	info->bat_desc.get_property = max1721x_battery_get_property;
+	psy_cfg.drv_data = info;
+
+	/* regmap init */
+	info->regmap = devm_regmap_init_w1(info->w1_dev,
+					&max1721x_regmap_w1_config);
+	if (IS_ERR(info->regmap)) {
+		int err = PTR_ERR(info->regmap);
+
+		dev_err(info->w1_dev, "Failed to allocate register map: %d\n",
+			err);
+		return err;
+	}
+
+	/* rsense init */
+	info->rsense = 0;
+	if (regmap_read(info->regmap, MAX1721X_REG_NRSENSE, &info->rsense)) {
+		dev_err(info->w1_dev, "Can't read RSense. Hardware error.\n");
+		return -ENODEV;
+	}
+
+	if (!info->rsense) {
+		dev_warn(info->w1_dev, "RSenese not calibrated, set 10 mOhms!\n");
+		info->rsense = 1000; /* in regs in 10^-5 */
+	}
+	dev_info(info->w1_dev, "RSense: %d mOhms.\n", info->rsense / 100);
+
+	if (get_string(info, MAX1721X_REG_MFG_STR,
+			MAX1721X_REG_MFG_NUMB, info->ManufacturerName)) {
+		dev_err(info->w1_dev, "Can't read manufacturer. Hardware error.\n");
+		return -ENODEV;
+	}
+
+	if (!info->ManufacturerName[0])
+		strncpy(info->ManufacturerName, DEF_MFG_NAME,
+			2 * MAX1721X_REG_MFG_NUMB);
+
+	if (get_string(info, MAX1721X_REG_DEV_STR,
+			MAX1721X_REG_DEV_NUMB, info->DeviceName)) {
+		dev_err(info->w1_dev, "Can't read device. Hardware error.\n");
+		return -ENODEV;
+	}
+	if (!info->DeviceName[0]) {
+		unsigned int dev_name;
+
+		if (regmap_read(info->regmap,
+				MAX172XX_REG_DEVNAME, &dev_name)) {
+			dev_err(info->w1_dev, "Can't read device name reg.\n");
+			return -ENODEV;
+		}
+
+		switch (dev_name & MAX172XX_DEV_MASK) {
+		case MAX172X1_DEV:
+			strncpy(info->DeviceName, DEF_DEV_NAME_MAX17211,
+				2 * MAX1721X_REG_DEV_NUMB);
+			break;
+		case MAX172X5_DEV:
+			strncpy(info->DeviceName, DEF_DEV_NAME_MAX17215,
+				2 * MAX1721X_REG_DEV_NUMB);
+			break;
+		default:
+			strncpy(info->DeviceName, DEF_DEV_NAME_UNKNOWN,
+				2 * MAX1721X_REG_DEV_NUMB);
+		}
+	}
+
+	if (get_sn_string(info, info->SerialNumber)) {
+		dev_err(info->w1_dev, "Can't read serial. Hardware error.\n");
+		return -ENODEV;
+	}
+
+	info->bat = devm_power_supply_register(&sl->dev, &info->bat_desc,
+						&psy_cfg);
+	if (IS_ERR(info->bat)) {
+		dev_err(info->w1_dev, "failed to register battery\n");
+		return PTR_ERR(info->bat);
+	}
+
+	return 0;
+}
+
+static struct w1_family_ops w1_max1721x_fops = {
+	.add_slave = devm_w1_max1721x_add_device,
+};
+
+static struct w1_family w1_max1721x_family = {
+	.fid = W1_MAX1721X_FAMILY_ID,
+	.fops = &w1_max1721x_fops,
+};
+
+module_w1_family(w1_max1721x_family);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alex A. Mihaylov <minimumlaw@rambler.ru>");
+MODULE_DESCRIPTION("Maxim MAX17211/MAX17215 Fuel Gauage IC driver");
+MODULE_ALIAS("w1-family-" __stringify(W1_MAX1721X_FAMILY_ID));

drivers/power/supply/olpc_battery.c

@@ -535,7 +535,7 @@ static ssize_t olpc_bat_eeprom_read(struct file *filp, struct kobject *kobj,
 	return count;
 }
 
-static struct bin_attribute olpc_bat_eeprom = {
+static const struct bin_attribute olpc_bat_eeprom = {
 	.attr = {
 		.name = "eeprom",
 		.mode = S_IRUGO,
@@ -559,7 +559,7 @@ static ssize_t olpc_bat_error_read(struct device *dev,
 	return sprintf(buf, "%d\n", ec_byte);
 }
 
-static struct device_attribute olpc_bat_error = {
+static const struct device_attribute olpc_bat_error = {
 	.attr = {
 		.name = "error",
 		.mode = S_IRUGO,

drivers/power/supply/pcf50633-charger.c

@@ -254,7 +254,7 @@ static struct attribute *pcf50633_mbc_sysfs_entries[] = {
 	NULL,
 };
 
-static struct attribute_group mbc_attr_group = {
+static const struct attribute_group mbc_attr_group = {
 	.name	= NULL,			/* put in device directory */
 	.attrs	= pcf50633_mbc_sysfs_entries,
 };

drivers/power/supply/power_supply_core.c

@@ -259,18 +259,14 @@ static int power_supply_check_supplies(struct power_supply *psy)
 	/* All supplies found, allocate char ** array for filling */
 	psy->supplied_from = devm_kzalloc(&psy->dev, sizeof(psy->supplied_from),
 					  GFP_KERNEL);
-	if (!psy->supplied_from) {
-		dev_err(&psy->dev, "Couldn't allocate memory for supply list\n");
+	if (!psy->supplied_from)
 		return -ENOMEM;
-	}
 
 	*psy->supplied_from = devm_kzalloc(&psy->dev,
 					   sizeof(char *) * (cnt - 1),
 					   GFP_KERNEL);
-	if (!*psy->supplied_from) {
-		dev_err(&psy->dev, "Couldn't allocate memory for supply list\n");
+	if (!*psy->supplied_from)
 		return -ENOMEM;
-	}
 
 	return power_supply_populate_supplied_from(psy);
 }
@@ -314,11 +310,12 @@ static int __power_supply_am_i_supplied(struct device *dev, void *_data)
 	struct power_supply *epsy = dev_get_drvdata(dev);
 	struct psy_am_i_supplied_data *data = _data;
 
-	data->count++;
-	if (__power_supply_is_supplied_by(epsy, data->psy))
+	if (__power_supply_is_supplied_by(epsy, data->psy)) {
+		data->count++;
 		if (!epsy->desc->get_property(epsy, POWER_SUPPLY_PROP_ONLINE,
 					&ret))
 			return ret.intval;
+	}
 
 	return 0;
 }
@@ -374,6 +371,47 @@ int power_supply_is_system_supplied(void)
 }
 EXPORT_SYMBOL_GPL(power_supply_is_system_supplied);
 
+static int __power_supply_get_supplier_max_current(struct device *dev,
+						   void *data)
+{
+	union power_supply_propval ret = {0,};
+	struct power_supply *epsy = dev_get_drvdata(dev);
+	struct power_supply *psy = data;
+
+	if (__power_supply_is_supplied_by(epsy, psy))
+		if (!epsy->desc->get_property(epsy,
+					      POWER_SUPPLY_PROP_CURRENT_MAX,
+					      &ret))
+			return ret.intval;
+
+	return 0;
+}
+
+int power_supply_set_input_current_limit_from_supplier(struct power_supply *psy)
+{
+	union power_supply_propval val = {0,};
+	int curr;
+
+	if (!psy->desc->set_property)
+		return -EINVAL;
+
+	/*
+	 * This function is not intended for use with a supply with multiple
+	 * suppliers, we simply pick the first supply to report a non 0
+	 * max-current.
+	 */
+	curr = class_for_each_device(power_supply_class, NULL, psy,
+				      __power_supply_get_supplier_max_current);
+	if (curr <= 0)
+		return (curr == 0) ? -ENODEV : curr;
+
+	val.intval = curr;
+
+	return psy->desc->set_property(psy,
+				POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, &val);
+}
+EXPORT_SYMBOL_GPL(power_supply_set_input_current_limit_from_supplier);
+
 int power_supply_set_battery_charged(struct power_supply *psy)
 {
 	if (atomic_read(&psy->use_cnt) >= 0 &&

drivers/power/supply/sbs-battery.c

@@ -12,25 +12,21 @@
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  */
 
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
+#include <linux/delay.h>
 #include <linux/err.h>
-#include <linux/power_supply.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
-#include <linux/slab.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/of.h>
-#include <linux/stat.h>
-
 #include <linux/power/sbs-battery.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
 
 enum {
 	REG_MANUFACTURER_DATA,
@@ -60,8 +56,8 @@ enum {
 #define BATTERY_MODE_OFFSET		0x03
 #define BATTERY_MODE_MASK		0x8000
 enum sbs_battery_mode {
-	BATTERY_MODE_AMPS,
-	BATTERY_MODE_WATTS
+	BATTERY_MODE_AMPS = 0,
+	BATTERY_MODE_WATTS = 0x8000
 };
 
 /* manufacturer access defines */
@@ -532,6 +528,8 @@ static enum sbs_battery_mode sbs_set_battery_mode(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 
+	usleep_range(1000, 2000);
+
 	return original_val & BATTERY_MODE_MASK;
 }
 

drivers/w1/slaves/Kconfig

@@ -148,10 +148,4 @@ config W1_SLAVE_DS28E04
 
 	  If you are unsure, say N.
 
-config W1_SLAVE_BQ27000
-	tristate "BQ27000 slave support"
-	help
-	  Say Y here if you want to use a hdq
-	  bq27000 slave support.
-
 endmenu

drivers/w1/slaves/Makefile

@@ -16,5 +16,4 @@ obj-$(CONFIG_W1_SLAVE_DS2438)	+= w1_ds2438.o
 obj-$(CONFIG_W1_SLAVE_DS2760)	+= w1_ds2760.o
 obj-$(CONFIG_W1_SLAVE_DS2780)	+= w1_ds2780.o
 obj-$(CONFIG_W1_SLAVE_DS2781)	+= w1_ds2781.o
-obj-$(CONFIG_W1_SLAVE_BQ27000)	+= w1_bq27000.o
 obj-$(CONFIG_W1_SLAVE_DS28E04)	+= w1_ds28e04.o

drivers/w1/slaves/w1_bq27000.c

-/*
- * drivers/w1/slaves/w1_bq27000.c
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-#include <linux/power/bq27xxx_battery.h>
-
-#include <linux/w1.h>
-
-#define W1_FAMILY_BQ27000	0x01
-
-#define HDQ_CMD_READ	(0)
-#define HDQ_CMD_WRITE	(1<<7)
-
-static int F_ID;
-module_param(F_ID, int, S_IRUSR);
-MODULE_PARM_DESC(F_ID, "1-wire slave FID for BQ device");
-
-static int w1_bq27000_read(struct device *dev, unsigned int reg)
-{
-	u8 val;
-	struct w1_slave *sl = container_of(dev->parent, struct w1_slave, dev);
-
-	mutex_lock(&sl->master->bus_mutex);
-	w1_write_8(sl->master, HDQ_CMD_READ | reg);
-	val = w1_read_8(sl->master);
-	mutex_unlock(&sl->master->bus_mutex);
-
-	return val;
-}
-
-static struct bq27xxx_platform_data bq27000_battery_info = {
-	.read   = w1_bq27000_read,
-	.name   = "bq27000-battery",
-	.chip   = BQ27000,
-};
-
-static int w1_bq27000_add_slave(struct w1_slave *sl)
-{
-	int ret;
-	struct platform_device *pdev;
-
-	pdev = platform_device_alloc("bq27000-battery", -1);
-	if (!pdev) {
-		ret = -ENOMEM;
-		return ret;
-	}
-	ret = platform_device_add_data(pdev,
-				       &bq27000_battery_info,
-				       sizeof(bq27000_battery_info));
-	if (ret)
-		goto pdev_add_failed;
-	pdev->dev.parent = &sl->dev;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-		goto pdev_add_failed;
-
-	dev_set_drvdata(&sl->dev, pdev);
-
-	goto success;
-
-pdev_add_failed:
-	platform_device_put(pdev);
-success:
-	return ret;
-}
-
-static void w1_bq27000_remove_slave(struct w1_slave *sl)
-{
-	struct platform_device *pdev = dev_get_drvdata(&sl->dev);
-
-	platform_device_unregister(pdev);
-}
-
-static struct w1_family_ops w1_bq27000_fops = {
-	.add_slave	= w1_bq27000_add_slave,
-	.remove_slave	= w1_bq27000_remove_slave,
-};
-
-static struct w1_family w1_bq27000_family = {
-	.fid = W1_FAMILY_BQ27000,
-	.fops = &w1_bq27000_fops,
-};
-
-static int __init w1_bq27000_init(void)
-{
-	if (F_ID)
-		w1_bq27000_family.fid = F_ID;
-
-	return w1_register_family(&w1_bq27000_family);
-}
-
-static void __exit w1_bq27000_exit(void)
-{
-	w1_unregister_family(&w1_bq27000_family);
-}
-
-module_init(w1_bq27000_init);
-module_exit(w1_bq27000_exit);
-
-MODULE_AUTHOR("Texas Instruments Ltd");
-MODULE_DESCRIPTION("HDQ/1-wire slave driver bq27000 battery monitor chip");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_BQ27000));

include/linux/power/bq24190_charger.h

+/*
+ * Platform data for the TI bq24190 battery charger driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _BQ24190_CHARGER_H_
+#define _BQ24190_CHARGER_H_
+
+#include <linux/regulator/machine.h>
+
+struct bq24190_platform_data {
+	const struct regulator_init_data *regulator_init_data;
+};
+
+#endif

include/linux/power/bq27xxx_battery.h

@@ -6,6 +6,7 @@ enum bq27xxx_chip {
 	BQ27010, /* bq27010, bq27210 */
 	BQ2750X, /* bq27500 deprecated alias */
 	BQ2751X, /* bq27510, bq27520 deprecated alias */
+	BQ2752X,
 	BQ27500, /* bq27500/1 */
 	BQ27510G1, /* bq27510G1 */
 	BQ27510G2, /* bq27510G2 */
@@ -15,26 +16,16 @@ enum bq27xxx_chip {
 	BQ27520G3, /* bq27520G3 */
 	BQ27520G4, /* bq27520G4 */
 	BQ27530, /* bq27530, bq27531 */
+	BQ27531,
 	BQ27541, /* bq27541, bq27542, bq27546, bq27742 */
+	BQ27542,
+	BQ27546,
+	BQ27742,
 	BQ27545, /* bq27545 */
 	BQ27421, /* bq27421, bq27425, bq27441, bq27621 */
-};
-
-/**
- * struct bq27xxx_plaform_data - Platform data for bq27xxx devices
- * @name: Name of the battery.
- * @chip: Chip class number of this device.
- * @read: HDQ read callback.
- *	This function should provide access to the HDQ bus the battery is
- *	connected to.
- *	The first parameter is a pointer to the battery device, the second the
- *	register to be read. The return value should either be the content of
- *	the passed register or an error value.
- */
-struct bq27xxx_platform_data {
-	const char *name;
-	enum bq27xxx_chip chip;
-	int (*read)(struct device *dev, unsigned int);
+	BQ27425,
+	BQ27441,
+	BQ27621,
 };
 
 struct bq27xxx_device_info;
@@ -63,7 +54,7 @@ struct bq27xxx_device_info {
 	struct device *dev;
 	int id;
 	enum bq27xxx_chip chip;
-	bool ram_chip;
+	u32 opts;
 	const char *name;
 	struct bq27xxx_dm_reg *dm_regs;
 	u32 unseal_key;

include/linux/power_supply.h

@@ -332,6 +332,8 @@ extern int power_supply_get_battery_info(struct power_supply *psy,
 					 struct power_supply_battery_info *info);
 extern void power_supply_changed(struct power_supply *psy);
 extern int power_supply_am_i_supplied(struct power_supply *psy);
+extern int power_supply_set_input_current_limit_from_supplier(
+					 struct power_supply *psy);
 extern int power_supply_set_battery_charged(struct power_supply *psy);
 
 #ifdef CONFIG_POWER_SUPPLY