Commit 0d0d976f authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab Committed by David S. Miller

docs: networking: device drivers: convert freescale/dpaa.txt to ReST

- add SPDX header;
- adjust titles and chapters, adding proper markups;
- mark code blocks and literals as such;
- use :field: markup;
- add to networking/index.rst.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ca705e47
.. SPDX-License-Identifier: GPL-2.0
==============================
The QorIQ DPAA Ethernet Driver
==============================
Authors:
Madalin Bucur <madalin.bucur@nxp.com>
Camelia Groza <camelia.groza@nxp.com>
- Madalin Bucur <madalin.bucur@nxp.com>
- Camelia Groza <camelia.groza@nxp.com>
Contents
========
.. Contents
- DPAA Ethernet Overview
- DPAA Ethernet Supported SoCs
......@@ -34,7 +36,7 @@ following drivers in the Linux kernel:
- Queue Manager (QMan), Buffer Manager (BMan)
drivers/soc/fsl/qbman
A simplified view of the dpaa_eth interfaces mapped to FMan MACs:
A simplified view of the dpaa_eth interfaces mapped to FMan MACs::
dpaa_eth /eth0\ ... /ethN\
driver | | | |
......@@ -50,7 +52,8 @@ A simplified view of the dpaa_eth interfaces mapped to FMan MACs:
FMan HW blocks: MURAM, MACs, Ports, SP
---------------------------------------------------------
The dpaa_eth relation to the QMan, BMan and FMan:
The dpaa_eth relation to the QMan, BMan and FMan::
________________________________
dpaa_eth / eth0 \
driver / \
......@@ -66,65 +69,68 @@ The dpaa_eth relation to the QMan, BMan and FMan:
----------------------- --------
where the acronyms used above (and in the code) are:
DPAA = Data Path Acceleration Architecture
FMan = DPAA Frame Manager
QMan = DPAA Queue Manager
BMan = DPAA Buffers Manager
QMI = QMan interface in FMan
BMI = BMan interface in FMan
FMan SP = FMan Storage Profiles
MURAM = Multi-user RAM in FMan
FQ = QMan Frame Queue
Rx Dfl FQ = default reception FQ
Rx Err FQ = Rx error frames FQ
Tx Cnf FQ = Tx confirmation FQs
Tx FQs = transmission frame queues
dtsec = datapath three speed Ethernet controller (10/100/1000 Mbps)
tgec = ten gigabit Ethernet controller (10 Gbps)
memac = multirate Ethernet MAC (10/100/1000/10000)
=============== ===========================================================
DPAA Data Path Acceleration Architecture
FMan DPAA Frame Manager
QMan DPAA Queue Manager
BMan DPAA Buffers Manager
QMI QMan interface in FMan
BMI BMan interface in FMan
FMan SP FMan Storage Profiles
MURAM Multi-user RAM in FMan
FQ QMan Frame Queue
Rx Dfl FQ default reception FQ
Rx Err FQ Rx error frames FQ
Tx Cnf FQ Tx confirmation FQs
Tx FQs transmission frame queues
dtsec datapath three speed Ethernet controller (10/100/1000 Mbps)
tgec ten gigabit Ethernet controller (10 Gbps)
memac multirate Ethernet MAC (10/100/1000/10000)
=============== ===========================================================
DPAA Ethernet Supported SoCs
============================
The DPAA drivers enable the Ethernet controllers present on the following SoCs:
# PPC
P1023
P2041
P3041
P4080
P5020
P5040
T1023
T1024
T1040
T1042
T2080
T4240
B4860
# ARM
LS1043A
LS1046A
PPC
- P1023
- P2041
- P3041
- P4080
- P5020
- P5040
- T1023
- T1024
- T1040
- T1042
- T2080
- T4240
- B4860
ARM
- LS1043A
- LS1046A
Configuring DPAA Ethernet in your kernel
========================================
To enable the DPAA Ethernet driver, the following Kconfig options are required:
To enable the DPAA Ethernet driver, the following Kconfig options are required::
# common for arch/arm64 and arch/powerpc platforms
CONFIG_FSL_DPAA=y
CONFIG_FSL_FMAN=y
CONFIG_FSL_DPAA_ETH=y
CONFIG_FSL_XGMAC_MDIO=y
# common for arch/arm64 and arch/powerpc platforms
CONFIG_FSL_DPAA=y
CONFIG_FSL_FMAN=y
CONFIG_FSL_DPAA_ETH=y
CONFIG_FSL_XGMAC_MDIO=y
# for arch/powerpc only
CONFIG_FSL_PAMU=y
# for arch/powerpc only
CONFIG_FSL_PAMU=y
# common options needed for the PHYs used on the RDBs
CONFIG_VITESSE_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_AQUANTIA_PHY=y
# common options needed for the PHYs used on the RDBs
CONFIG_VITESSE_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_AQUANTIA_PHY=y
DPAA Ethernet Frame Processing
==============================
......@@ -167,7 +173,9 @@ classes as follows:
* priorities 8 to 11 - traffic class 2 (medium-high priority)
* priorities 12 to 15 - traffic class 3 (high priority)
tc qdisc add dev <int> root handle 1: \
::
tc qdisc add dev <int> root handle 1: \
mqprio num_tc 4 map 0 0 0 0 1 1 1 1 2 2 2 2 3 3 3 3 hw 1
DPAA IRQ Affinity and Receive Side Scaling
......@@ -201,11 +209,11 @@ of these frame queues will arrive at the same portal and will always
be processed by the same CPU. This ensures intra-flow order preservation
and workload distribution for multiple traffic flows.
RSS can be turned off for a certain interface using ethtool, i.e.
RSS can be turned off for a certain interface using ethtool, i.e.::
# ethtool -N fm1-mac9 rx-flow-hash tcp4 ""
To turn it back on, one needs to set rx-flow-hash for tcp4/6 or udp4/6:
To turn it back on, one needs to set rx-flow-hash for tcp4/6 or udp4/6::
# ethtool -N fm1-mac9 rx-flow-hash udp4 sfdn
......@@ -216,7 +224,7 @@ going to control the rx-flow-hashing for all protocols on that interface.
Besides using the FMan Keygen computed hash for spreading traffic on the
128 Rx FQs, the DPAA Ethernet driver also sets the skb hash value when
the NETIF_F_RXHASH feature is on (active by default). This can be turned
on or off through ethtool, i.e.:
on or off through ethtool, i.e.::
# ethtool -K fm1-mac9 rx-hashing off
# ethtool -k fm1-mac9 | grep hash
......@@ -246,6 +254,7 @@ The following statistics are exported for each interface through ethtool:
- Rx error count per CPU
- Rx error count per type
- congestion related statistics:
- congestion status
- time spent in congestion
- number of time the device entered congestion
......
......@@ -37,6 +37,7 @@ Contents:
dec/de4x5
dec/dmfe
dlink/dl2k
freescale/dpaa
.. only:: subproject and html
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment