Commit 0d11bab8 authored by Shengjiu Wang's avatar Shengjiu Wang Committed by Mark Brown

ASoC: fsl_sai: Add support for more sample rates

Add support for more sample rates, because PDM format
bitstream has higher sample rates. for example DSD512
format, the bit clock is 22.5792MHz, if the word width
is U8_LE, then the max sample rate is 2822400.
Signed-off-by: default avatarShengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1655451877-16382-4-git-send-email-shengjiu.wang@nxp.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 46657704
...@@ -30,7 +30,8 @@ ...@@ -30,7 +30,8 @@
static const unsigned int fsl_sai_rates[] = { static const unsigned int fsl_sai_rates[] = {
8000, 11025, 12000, 16000, 22050, 8000, 11025, 12000, 16000, 22050,
24000, 32000, 44100, 48000, 64000, 24000, 32000, 44100, 48000, 64000,
88200, 96000, 176400, 192000 88200, 96000, 176400, 192000, 352800,
384000, 705600, 768000, 1411200, 2822400,
}; };
static const struct snd_pcm_hw_constraint_list fsl_sai_rate_constraints = { static const struct snd_pcm_hw_constraint_list fsl_sai_rate_constraints = {
...@@ -763,7 +764,7 @@ static struct snd_soc_dai_driver fsl_sai_dai_template = { ...@@ -763,7 +764,7 @@ static struct snd_soc_dai_driver fsl_sai_dai_template = {
.channels_min = 1, .channels_min = 1,
.channels_max = 32, .channels_max = 32,
.rate_min = 8000, .rate_min = 8000,
.rate_max = 192000, .rate_max = 2822400,
.rates = SNDRV_PCM_RATE_KNOT, .rates = SNDRV_PCM_RATE_KNOT,
.formats = FSL_SAI_FORMATS, .formats = FSL_SAI_FORMATS,
}, },
...@@ -772,7 +773,7 @@ static struct snd_soc_dai_driver fsl_sai_dai_template = { ...@@ -772,7 +773,7 @@ static struct snd_soc_dai_driver fsl_sai_dai_template = {
.channels_min = 1, .channels_min = 1,
.channels_max = 32, .channels_max = 32,
.rate_min = 8000, .rate_min = 8000,
.rate_max = 192000, .rate_max = 2822400,
.rates = SNDRV_PCM_RATE_KNOT, .rates = SNDRV_PCM_RATE_KNOT,
.formats = FSL_SAI_FORMATS, .formats = FSL_SAI_FORMATS,
}, },
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment