Skip to content

L
linux
Commit 0d3430ba authored by Gerd Knorr's avatar Gerd Knorr Committed by Linus Torvalds
Browse files
Options

[PATCH] saa7134 update 

Major saa7134 driver update.  Changes:
 * add a bunch of new cards.
 * add dvb card support (Pinnacle 300i only for now ...).
 * update empress encoder card support,
   use the new v4l2 mpeg API for the settings.
Signed-off-by: default avatarGerd Knorr <kraxel@bytesex.org>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 32ecb127
Show whitespace changes
Inline Side-by-side
Showing with 1065 additions and 241 deletions
drivers/media/video/Kconfig
View file @ 0d3430ba
......@@ -249,7 +249,9 @@ config VIDEO_SAA7134
config VIDEO_SAA7134_DVB
tristate "DVB Support for saa7134 based TV cards"
depends on VIDEO_SAA7134 && DVB_CORE && BROKEN
depends on VIDEO_SAA7134 && DVB_CORE
select VIDEO_BUF_DVB
select DVB_MT352
---help---
This adds support for DVB cards based on the
Philips saa7134 chip.
......
drivers/media/video/saa7134/Makefile
View file @ 0d3430ba
......@@ -8,3 +8,4 @@ obj-$(CONFIG_VIDEO_SAA7134_DVB) += saa7134-dvb.o
EXTRA_CFLAGS += -I$(src)/..
EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/frontends
drivers/media/video/saa7134/saa6752hs.c
View file @ 0d3430ba
......@@ -11,9 +11,14 @@
#include <linux/types.h>
#include <linux/videodev.h>
#include <linux/init.h>
#include <linux/crc32.h>
#include <media/id.h>
#include <media/saa6752hs.h>
#define MPEG_VIDEO_TARGET_BITRATE_MAX 27000
#define MPEG_VIDEO_MAX_BITRATE_MAX 27000
#define MPEG_TOTAL_TARGET_BITRATE_MAX 27000
#define MPEG_PID_MAX ((1 << 14) - 1)
/* Addresses to scan */
static unsigned short normal_i2c[] = {0x20, I2C_CLIENT_END};
......@@ -27,6 +32,10 @@ MODULE_LICENSE("GPL");
static struct i2c_driver driver;
static struct i2c_client client_template;
struct saa6752hs_state {
struct i2c_client client;
struct v4l2_mpeg_compression params;
};
enum saa6752hs_command {
SAA6752HS_COMMAND_RESET = 0,
......@@ -40,7 +49,6 @@ enum saa6752hs_command {
SAA6752HS_COMMAND_MAX
};
/* ---------------------------------------------------------------------- */
static u8 PAT[] = {
......@@ -64,9 +72,9 @@ static u8 PAT[] = {
0x00, 0x01, // program_number(1)
0xe0, 0x10, // PMT PID(0x10)
0xe0, 0x00, // PMT PID
0x76, 0xf1, 0x44, 0xd1 // CRC32
0x00, 0x00, 0x00, 0x00 // CRC32
};
static u8 PMT[] = {
......@@ -74,7 +82,7 @@ static u8 PMT[] = {
0x01, // table number for encoder
0x47, // sync
0x40, 0x10, // transport_error_indicator(0), payload_unit_start(1), transport_priority(0), pid(0x10)
0x40, 0x00, // transport_error_indicator(0), payload_unit_start(1), transport_priority(0), pid
0x10, // transport_scrambling_control(00), adaptation_field_control(01), continuity_counter(0)
0x00, // PSI pointer to start of table
......@@ -88,28 +96,51 @@ static u8 PMT[] = {
0x00, 0x00, // section_number(0), last_section_number(0)
0xe1, 0x04, // PCR_PID (0x104)
0xe0, 0x00, // PCR_PID
0xf0, 0x00, // program_info_length(0)
0x02, 0xe1, 0x00, 0xf0, 0x00, // video stream type(2), pid(0x100)
0x04, 0xe1, 0x03, 0xf0, 0x00, // audio stream type(4), pid(0x103)
0x02, 0xe0, 0x00, 0xf0, 0x00, // video stream type(2), pid
0x04, 0xe0, 0x00, 0xf0, 0x00, // audio stream type(4), pid
0xa1, 0xca, 0x0f, 0x82 // CRC32
0x00, 0x00, 0x00, 0x00 // CRC32
};
static struct mpeg_params mpeg_params_template =
static struct v4l2_mpeg_compression param_defaults =
{
.bitrate_mode = MPEG_BITRATE_MODE_CBR,
.video_target_bitrate = 5000,
.audio_bitrate = MPEG_AUDIO_BITRATE_256,
.total_bitrate = 6000,
.st_type = V4L2_MPEG_TS_2,
.st_bitrate = {
.mode = V4L2_BITRATE_CBR,
.target = 7000,
},
.ts_pid_pmt = 16,
.ts_pid_video = 260,
.ts_pid_audio = 256,
.ts_pid_pcr = 259,
.vi_type = V4L2_MPEG_VI_2,
.vi_aspect_ratio = V4L2_MPEG_ASPECT_4_3,
.vi_bitrate = {
.mode = V4L2_BITRATE_VBR,
.target = 4000,
.max = 6000,
},
.au_type = V4L2_MPEG_AU_2_II,
.au_bitrate = {
.mode = V4L2_BITRATE_CBR,
.target = 256,
},
#if 0
/* FIXME: size? via S_FMT? */
.video_format = MPEG_VIDEO_FORMAT_D1,
#endif
};
/* ---------------------------------------------------------------------- */
static int saa6752hs_chip_command(struct i2c_client* client,
enum saa6752hs_command command)
{
......@@ -180,72 +211,115 @@ static int saa6752hs_chip_command(struct i2c_client* client,
static int saa6752hs_set_bitrate(struct i2c_client* client,
struct mpeg_params* params)
struct v4l2_mpeg_compression* params)
{
u8 buf[3];
// set the bitrate mode
buf[0] = 0x71;
buf[1] = params->bitrate_mode;
buf[1] = (params->vi_bitrate.mode == V4L2_BITRATE_VBR) ? 0 : 1;
i2c_master_send(client, buf, 2);
// set the video bitrate
if (params->bitrate_mode == MPEG_BITRATE_MODE_VBR) {
if (params->vi_bitrate.mode == V4L2_BITRATE_VBR) {
// set the target bitrate
buf[0] = 0x80;
buf[1] = params->video_target_bitrate >> 8;
buf[2] = params->video_target_bitrate & 0xff;
buf[1] = params->vi_bitrate.target >> 8;
buf[2] = params->vi_bitrate.target & 0xff;
i2c_master_send(client, buf, 3);
// set the max bitrate
buf[0] = 0x81;
buf[1] = params->video_max_bitrate >> 8;
buf[2] = params->video_max_bitrate & 0xff;
buf[1] = params->vi_bitrate.max >> 8;
buf[2] = params->vi_bitrate.max & 0xff;
i2c_master_send(client, buf, 3);
} else {
// set the target bitrate (no max bitrate for CBR)
buf[0] = 0x81;
buf[1] = params->video_target_bitrate >> 8;
buf[2] = params->video_target_bitrate & 0xff;
buf[1] = params->vi_bitrate.target >> 8;
buf[2] = params->vi_bitrate.target & 0xff;
i2c_master_send(client, buf, 3);
}
// set the audio bitrate
buf[0] = 0x94;
buf[1] = params->audio_bitrate;
buf[1] = (256 == params->au_bitrate.target) ? 0 : 1;
i2c_master_send(client, buf, 2);
// set the total bitrate
buf[0] = 0xb1;
buf[1] = params->total_bitrate >> 8;
buf[2] = params->total_bitrate & 0xff;
buf[1] = params->st_bitrate.target >> 8;
buf[2] = params->st_bitrate.target & 0xff;
i2c_master_send(client, buf, 3);
// return success
return 0;
}
static int saa6752hs_init(struct i2c_client* client, struct mpeg_params* params)
static void saa6752hs_set_params(struct i2c_client* client,
struct v4l2_mpeg_compression* params)
{
unsigned char buf[3];
void *data;
struct saa6752hs_state *h = i2c_get_clientdata(client);
/* check PIDs */
if (params->ts_pid_pmt <= MPEG_PID_MAX)
h->params.ts_pid_pmt = params->ts_pid_pmt;
if (params->ts_pid_pcr <= MPEG_PID_MAX)
h->params.ts_pid_pcr = params->ts_pid_pcr;
if (params->ts_pid_video <= MPEG_PID_MAX)
h->params.ts_pid_video = params->ts_pid_video;
if (params->ts_pid_audio <= MPEG_PID_MAX)
h->params.ts_pid_audio = params->ts_pid_audio;
/* check bitrate parameters */
if ((params->vi_bitrate.mode == V4L2_BITRATE_CBR) ||
(params->vi_bitrate.mode == V4L2_BITRATE_VBR))
h->params.vi_bitrate.mode = params->vi_bitrate.mode;
if (params->vi_bitrate.mode != V4L2_BITRATE_NONE)
h->params.st_bitrate.target = params->st_bitrate.target;
if (params->vi_bitrate.mode != V4L2_BITRATE_NONE)
h->params.vi_bitrate.target = params->vi_bitrate.target;
if (params->vi_bitrate.mode == V4L2_BITRATE_VBR)
h->params.vi_bitrate.max = params->vi_bitrate.max;
if (params->au_bitrate.mode != V4L2_BITRATE_NONE)
h->params.au_bitrate.target = params->au_bitrate.target;
/* aspect ratio */
if (params->vi_aspect_ratio == V4L2_MPEG_ASPECT_4_3 ||
params->vi_aspect_ratio == V4L2_MPEG_ASPECT_16_9)
h->params.vi_aspect_ratio = params->vi_aspect_ratio;
/* range checks */
if (h->params.st_bitrate.target > MPEG_TOTAL_TARGET_BITRATE_MAX)
h->params.st_bitrate.target = MPEG_TOTAL_TARGET_BITRATE_MAX;
if (h->params.vi_bitrate.target > MPEG_VIDEO_TARGET_BITRATE_MAX)
h->params.vi_bitrate.target = MPEG_VIDEO_TARGET_BITRATE_MAX;
if (h->params.vi_bitrate.max > MPEG_VIDEO_MAX_BITRATE_MAX)
h->params.vi_bitrate.max = MPEG_VIDEO_MAX_BITRATE_MAX;
if (h->params.au_bitrate.target <= 256)
h->params.au_bitrate.target = 256;
else
h->params.au_bitrate.target = 384;
}
// check the bitrate parameters first
if (params != NULL) {
if (params->bitrate_mode >= MPEG_BITRATE_MODE_MAX)
return -EINVAL;
if (params->video_target_bitrate >= MPEG_VIDEO_TARGET_BITRATE_MAX)
return -EINVAL;
if (params->video_max_bitrate >= MPEG_VIDEO_MAX_BITRATE_MAX)
return -EINVAL;
if (params->audio_bitrate >= MPEG_AUDIO_BITRATE_MAX)
return -EINVAL;
if (params->total_bitrate >= MPEG_TOTAL_BITRATE_MAX)
return -EINVAL;
if (params->bitrate_mode == MPEG_BITRATE_MODE_MAX &&
params->video_target_bitrate <= params->video_max_bitrate)
return -EINVAL;
}
static int saa6752hs_init(struct i2c_client* client)
{
unsigned char buf[9], buf2[4];
struct saa6752hs_state *h;
u32 crc;
unsigned char localPAT[256];
unsigned char localPMT[256];
h = i2c_get_clientdata(client);
// Set video format - must be done first as it resets other settings
buf[0] = 0x41;
buf[1] = 0 /* MPEG_VIDEO_FORMAT_D1 */;
i2c_master_send(client, buf, 2);
// set bitrate
saa6752hs_set_bitrate(client, &h->params);
// Set GOP structure {3, 13}
buf[0] = 0x72;
......@@ -265,7 +339,7 @@ static int saa6752hs_init(struct i2c_client* client, struct mpeg_params* params)
// Set Output Protocol
buf[0] = 0xD0;
buf[1] = 0x01;
buf[1] = 0x81;
i2c_master_send(client,buf,2);
// Set video output stream format {TS}
......@@ -273,25 +347,53 @@ static int saa6752hs_init(struct i2c_client* client, struct mpeg_params* params)
buf[1] = 0x05;
i2c_master_send(client,buf,2);
// Set Audio PID {0x103}
/* compute PAT */
memcpy(localPAT, PAT, sizeof(PAT));
localPAT[17] = 0xe0 | ((h->params.ts_pid_pmt >> 8) & 0x0f);
localPAT[18] = h->params.ts_pid_pmt & 0xff;
crc = crc32_be(~0, &localPAT[7], sizeof(PAT) - 7 - 4);
localPAT[sizeof(PAT) - 4] = (crc >> 24) & 0xFF;
localPAT[sizeof(PAT) - 3] = (crc >> 16) & 0xFF;
localPAT[sizeof(PAT) - 2] = (crc >> 8) & 0xFF;
localPAT[sizeof(PAT) - 1] = crc & 0xFF;
/* compute PMT */
memcpy(localPMT, PMT, sizeof(PMT));
localPMT[3] = 0x40 | ((h->params.ts_pid_pmt >> 8) & 0x0f);
localPMT[4] = h->params.ts_pid_pmt & 0xff;
localPMT[15] = 0xE0 | ((h->params.ts_pid_pcr >> 8) & 0x0F);
localPMT[16] = h->params.ts_pid_pcr & 0xFF;
localPMT[20] = 0xE0 | ((h->params.ts_pid_video >> 8) & 0x0F);
localPMT[21] = h->params.ts_pid_video & 0xFF;
localPMT[25] = 0xE0 | ((h->params.ts_pid_audio >> 8) & 0x0F);
localPMT[26] = h->params.ts_pid_audio & 0xFF;
crc = crc32_be(~0, &localPMT[7], sizeof(PMT) - 7 - 4);
localPMT[sizeof(PMT) - 4] = (crc >> 24) & 0xFF;
localPMT[sizeof(PMT) - 3] = (crc >> 16) & 0xFF;
localPMT[sizeof(PMT) - 2] = (crc >> 8) & 0xFF;
localPMT[sizeof(PMT) - 1] = crc & 0xFF;
// Set Audio PID
buf[0] = 0xC1;
buf[1] = 0x01;
buf[2] = 0x03;
buf[1] = (h->params.ts_pid_audio >> 8) & 0xFF;
buf[2] = h->params.ts_pid_audio & 0xFF;
i2c_master_send(client,buf,3);
// setup bitrate settings
data = i2c_get_clientdata(client);
if (params) {
saa6752hs_set_bitrate(client, params);
memcpy(data, params, sizeof(struct mpeg_params));
} else {
// parameters were not supplied. use the previous set
saa6752hs_set_bitrate(client, (struct mpeg_params*) data);
}
// Set Video PID
buf[0] = 0xC0;
buf[1] = (h->params.ts_pid_video >> 8) & 0xFF;
buf[2] = h->params.ts_pid_video & 0xFF;
i2c_master_send(client,buf,3);
// Set PCR PID
buf[0] = 0xC4;
buf[1] = (h->params.ts_pid_pcr >> 8) & 0xFF;
buf[2] = h->params.ts_pid_pcr & 0xFF;
i2c_master_send(client,buf,3);
// Send SI tables
i2c_master_send(client,PAT,sizeof(PAT));
i2c_master_send(client,PMT,sizeof(PMT));
i2c_master_send(client,localPAT,sizeof(PAT));
i2c_master_send(client,localPMT,sizeof(PMT));
// mute then unmute audio. This removes buzzing artefacts
buf[0] = 0xa4;
......@@ -303,31 +405,56 @@ static int saa6752hs_init(struct i2c_client* client, struct mpeg_params* params)
// start it going
saa6752hs_chip_command(client, SAA6752HS_COMMAND_START);
// readout current state
buf[0] = 0xE1;
buf[1] = 0xA7;
buf[2] = 0xFE;
buf[3] = 0x82;
buf[4] = 0xB0;
i2c_master_send(client, buf, 5);
i2c_master_recv(client, buf2, 4);
// change aspect ratio
buf[0] = 0xE0;
buf[1] = 0xA7;
buf[2] = 0xFE;
buf[3] = 0x82;
buf[4] = 0xB0;
buf[5] = buf2[0];
switch(h->params.vi_aspect_ratio) {
case V4L2_MPEG_ASPECT_16_9:
buf[6] = buf2[1] | 0x40;
break;
case V4L2_MPEG_ASPECT_4_3:
default:
buf[6] = buf2[1] & 0xBF;
break;
break;
}
buf[7] = buf2[2];
buf[8] = buf2[3];
i2c_master_send(client, buf, 9);
// return success
return 0;
}
static int saa6752hs_attach(struct i2c_adapter *adap, int addr, int kind)
{
struct i2c_client *client;
struct mpeg_params* params;
client_template.adapter = adap;
client_template.addr = addr;
struct saa6752hs_state *h;
printk("saa6752hs: chip found @ 0x%x\n", addr<<1);
if (NULL == (client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL)))
return -ENOMEM;
memcpy(client,&client_template,sizeof(struct i2c_client));
strlcpy(client->name, "saa6752hs", sizeof(client->name));
if (NULL == (params = kmalloc(sizeof(struct mpeg_params), GFP_KERNEL)))
if (NULL == (h = kmalloc(sizeof(*h), GFP_KERNEL)))
return -ENOMEM;
memcpy(params,&mpeg_params_template,sizeof(struct mpeg_params));
i2c_set_clientdata(client, params);
i2c_attach_client(client);
memset(h,0,sizeof(*h));
h->client = client_template;
h->params = param_defaults;
h->client.adapter = adap;
h->client.addr = addr;
i2c_set_clientdata(&h->client, h);
i2c_attach_client(&h->client);
return 0;
}
......@@ -340,30 +467,39 @@ static int saa6752hs_probe(struct i2c_adapter *adap)
static int saa6752hs_detach(struct i2c_client *client)
{
void *data;
struct saa6752hs_state *h;
data = i2c_get_clientdata(client);
h = i2c_get_clientdata(client);
i2c_detach_client(client);
kfree(data);
kfree(client);
kfree(h);
return 0;
}
static int
saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg)
{
struct mpeg_params* init_arg = arg;
struct saa6752hs_state *h = i2c_get_clientdata(client);
struct v4l2_mpeg_compression *params = arg;
int err = 0;
switch (cmd) {
case MPEG_SETPARAMS:
return saa6752hs_init(client, init_arg);
case VIDIOC_S_MPEGCOMP:
if (NULL == params) {
/* apply settings and start encoder */
saa6752hs_init(client);
break;
}
saa6752hs_set_params(client, params);
/* fall through */
case VIDIOC_G_MPEGCOMP:
*params = h->params;
break;
default:
/* nothing */
break;
}
return 0;
return err;
}
/* ----------------------------------------------------------------------- */
......@@ -380,7 +516,7 @@ static struct i2c_driver driver = {
static struct i2c_client client_template =
{
I2C_DEVNAME("(saa6752hs unset)"),
I2C_DEVNAME("saa6752hs"),
.flags = I2C_CLIENT_ALLOW_USE,
.driver = &driver,
};
......
drivers/media/video/saa7134/saa7134-cards.c
View file @ 0d3430ba
/*
* $Id: saa7134-cards.c,v 1.35 2004/11/07 14:44:59 kraxel Exp $
* $Id: saa7134-cards.c,v 1.54 2005/03/07 12:01:51 kraxel Exp $
*
* device driver for philips saa7134 based TV cards
* card-specific stuff.
......@@ -156,11 +157,11 @@ struct saa7134_board saa7134_boards[] = {
.gpio = 0x8000,
},
},
[SAA7134_BOARD_FLYTVPLATINUM] = {
[SAA7134_BOARD_FLYTVPLATINUM_MINI] = {
/* "Arnaud Quette" <aquette@free.fr> */
.name = "LifeView FlyTV Platinum",
.name = "LifeView FlyTV Platinum Mini",
.audio_clock = 0x00200000,
.tuner_type = TUNER_PHILIPS_SECAM,
.tuner_type = TUNER_PHILIPS_TDA8290,
.inputs = {{
.name = name_tv,
.vmux = 1,
......@@ -176,6 +177,47 @@ struct saa7134_board saa7134_boards[] = {
.amux = LINE2,
}},
},
[SAA7134_BOARD_FLYTVPLATINUM_FM] = {
/* LifeView FlyTV Platinum FM (LR214WF) */
/* "Peter Missel <peter.missel@onlinehome.de> */
.name = "LifeView FlyTV Platinum FM",
.audio_clock = 0x00200000,
.tuner_type = TUNER_PHILIPS_TDA8290,
// .gpiomask = 0xe000,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = TV,
// .gpio = 0x0000,
.tv = 1,
},{
/* .name = name_tv_mono,
.vmux = 1,
.amux = LINE2,
.gpio = 0x0000,
.tv = 1,
},{
*/ .name = name_comp1, /* Composite signal on S-Video input */
.vmux = 0,
.amux = LINE2,
// .gpio = 0x4000,
},{
.name = name_comp2, /* Composite input */
.vmux = 3,
.amux = LINE2,
// .gpio = 0x4000,
},{
.name = name_svideo, /* S-Video signal on S-Video input */
.vmux = 8,
.amux = LINE2,
// .gpio = 0x4000,
}},
/* .radio = {
.name = name_radio,
.amux = LINE2,
.gpio = 0x2000,
},
*/ },
[SAA7134_BOARD_EMPRESS] = {
/* "Gert Vervoort" <gert.vervoort@philips.com> */
.name = "EMPRESS",
......@@ -436,6 +478,7 @@ struct saa7134_board saa7134_boards[] = {
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.tda9887_conf = TDA9887_PRESENT,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
.vmux = 1,
......@@ -444,11 +487,11 @@ struct saa7134_board saa7134_boards[] = {
},{
.name = name_comp1,
.vmux = 0,
.amux = LINE2,
.amux = LINE1,
},{
.name = name_svideo,
.vmux = 8,
.amux = LINE2,
.amux = LINE1,
}},
.radio = {
.name = name_radio,
......@@ -544,6 +587,34 @@ struct saa7134_board saa7134_boards[] = {
.amux = LINE1,
},
},
[SAA7135_BOARD_ASUSTeK_TVFM7135] = {
.name = "ASUS TV-FM 7135",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.gpiomask = 0x200000,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = TV,
.gpio = 0x0000,
.tv = 1,
},{
.name = name_comp1,
.vmux = 4,
.amux = LINE2,
.gpio = 0x0000,
},{
.name = name_svideo,
.vmux = 6,
.amux = LINE2,
.gpio = 0x0000,
}},
.radio = {
.name = name_radio,
.amux = TV,
.gpio = 0x200000,
},
},
[SAA7134_BOARD_VA1000POWER] = {
.name = "AOPEN VA1000 POWER",
.audio_clock = 0x00187de7,
......@@ -749,7 +820,7 @@ struct saa7134_board saa7134_boards[] = {
},{
.name = name_tv,
.vmux = 3,
.amux = LINE2,
.amux = TV,
.tv = 1,
}},
.mpeg = SAA7134_MPEG_EMPRESS,
......@@ -828,6 +899,10 @@ struct saa7134_board saa7134_boards[] = {
.name = name_radio,
.amux = LINE2,
},
.mute = {
.name = name_mute,
.amux = LINE1,
},
},
[SAA7134_BOARD_MANLI_MTV001] = {
/* Ognjen Nastic <ognjen@logosoft.ba> UNTESTED */
......@@ -975,6 +1050,9 @@ struct saa7134_board saa7134_boards[] = {
.inputs = {{
.name = name_comp1,
.vmux = 3,
},{
.name = name_svideo,
.vmux = 8,
}},
},
[SAA7134_BOARD_NOVAC_PRIMETV7133] = {
......@@ -995,11 +1073,12 @@ struct saa7134_board saa7134_boards[] = {
.vmux = 8,
}},
},
[SAA7134_BOARD_AVERMEDIA_305] = {
.name = "AverMedia 305",
[SAA7134_BOARD_AVERMEDIA_STUDIO_305] = {
.name = "AverMedia AverTV Studio 305",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.tuner_type = TUNER_PHILIPS_FM1256_IH3,
.tda9887_conf = TDA9887_PRESENT,
.gpiomask = 0x3,
.inputs = {{
.name = name_tv,
.vmux = 1,
......@@ -1104,23 +1183,23 @@ struct saa7134_board saa7134_boards[] = {
.name = name_svideo,
.vmux = 8,
.amux = LINE1,
.gpio = 0x00080
.gpio = 0x00080,
},{
.name = name_comp1,
.vmux = 3,
.amux = LINE1,
.gpio = 0x00080
.gpio = 0x00080,
},{
.name = name_tv,
.vmux = 1,
.amux = LINE2,
.amux = LINE2_LEFT,
.tv = 1,
.gpio = 0x00080
.gpio = 0x00080,
}},
.radio = {
.name = name_radio,
.amux = LINE2,
.gpio = 0x80000
.gpio = 0x80000,
},
.mute = {
.name = name_mute,
......@@ -1129,20 +1208,19 @@ struct saa7134_board saa7134_boards[] = {
},
},
[SAA7134_BOARD_SABRENT_SBTTVFM] = {
/* Michael Rodriguez-Torrent */
/* Michael Rodriguez-Torrent <mrtorrent@asu.edu> */
.name = "Sabrent SBT-TVFM (saa7130)",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_NTSC_M,
.tda9887_conf = TDA9887_PRESENT,
.inputs = {{
.name = name_comp1,
.vmux = 1,
.amux = LINE2,
},{
.name = name_tv,
.vmux = 3,
.amux = LINE2,
.tv = 1,
},{
.name = name_comp1,
.vmux = 1,
.amux = LINE2,
},{
.name = name_svideo,
.vmux = 8,
......@@ -1208,32 +1286,41 @@ struct saa7134_board saa7134_boards[] = {
}
},
[SAA7134_BOARD_AVERMEDIA_307] = {
/* Nickolay V. Shmyrev <nshmyrev@yandex.ru> */
/*
Nickolay V. Shmyrev <nshmyrev@yandex.ru>
Lots of thanks to Andrey Zolotarev <zolotarev_andrey@mail.ru>
*/
.name = "Avermedia AVerTV Studio 307",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.tuner_type = TUNER_PHILIPS_FM1256_IH3,
.tda9887_conf = TDA9887_PRESENT,
.gpiomask = 0x03,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = TV,
.tv = 1,
.gpio = 0x00,
},{
.name = name_comp1,
.vmux = 0,
.amux = LINE2,
.gpio = 0x00,
},{
.name = name_comp2,
.vmux = 3,
.amux = LINE2,
.gpio = 0x00,
},{
.name = name_svideo,
.vmux = 8,
.amux = LINE2,
.gpio = 0x00,
}},
.radio = {
.name = name_radio,
.amux = TV,
.amux = LINE1,
.gpio = 0x01,
},
},
[SAA7134_BOARD_AVERMEDIA_CARDBUS] = {
......@@ -1263,10 +1350,17 @@ struct saa7134_board saa7134_boards[] = {
[SAA7134_BOARD_CINERGY400_CARDBUS] = {
.name = "Terratec Cinergy 400 mobile",
.audio_clock = 0x187de7,
.tuner_type = UNSET /* not supported yet :/ */,
.tuner_type = TUNER_ALPS_TSBE5_PAL,
.tda9887_conf = TDA9887_PRESENT,
.inputs = {{
.name = name_tv,
.vmux = 5,
.vmux = 1,
.amux = TV,
.tv = 1,
},{
.name = name_tv_mono,
.vmux = 1,
.amux = LINE2,
.tv = 1,
},{
.name = name_comp1,
......@@ -1274,8 +1368,182 @@ struct saa7134_board saa7134_boards[] = {
.amux = LINE1,
},{
.name = name_svideo,
.vmux = 8,
.amux = LINE1,
}},
},
[SAA7134_BOARD_CINERGY600_MK3] = {
.name = "Terratec Cinergy 600 TV MK3",
.audio_clock = 0x00200000,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.tda9887_conf = TDA9887_PRESENT,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = TV,
.tv = 1,
},{
.name = name_comp1,
.vmux = 4,
.amux = LINE1,
},{
.name = name_svideo,
.vmux = 8,
.amux = LINE1,
},{
.name = name_comp2, // CVideo over SVideo Connector
.vmux = 0,
.amux = LINE1,
}},
.radio = {
.name = name_radio,
.amux = LINE2,
},
},
[SAA7134_BOARD_VIDEOMATE_GOLD_PLUS] = {
/* Dylan Walkden <dylan_walkden@hotmail.com> */
.name = "Compro VideoMate Gold+ Pal",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_PAL,
.gpiomask = 0x1ce780,
.inputs = {{
.name = name_svideo,
.vmux = 0, // CVideo over SVideo Connector - ok?
.amux = LINE1,
.gpio = 0x008080,
},{
.name = name_comp1,
.vmux = 3,
.amux = LINE1,
.gpio = 0x008080,
},{
.name = name_tv,
.vmux = 1,
.amux = TV,
.tv = 1,
.gpio = 0x008080,
}},
.radio = {
.name = name_radio,
.amux = LINE2,
.gpio = 0x80000,
},
.mute = {
.name = name_mute,
.amux = LINE2,
.gpio = 0x0c8000,
},
},
[SAA7134_BOARD_PINNACLE_300I_DVBT_PAL] = {
.name = "Pinnacle PCTV 300i DVB-T + PAL",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_MT2032,
.tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
.vmux = 3,
.amux = TV,
.tv = 1,
},{
.name = name_comp1,
.vmux = 0,
.amux = LINE2,
},{
.name = name_comp2,
.vmux = 1,
.amux = LINE2,
},{
.name = name_svideo,
.vmux = 8,
.amux = LINE2,
}},
},
[SAA7134_BOARD_PROVIDEO_PV952] = {
/* andreas.kretschmer@web.de */
.name = "ProVideo PV952",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.tda9887_conf = TDA9887_PRESENT,
.inputs = {{
.name = name_comp1,
.vmux = 0,
.amux = LINE1,
},{
.name = name_tv,
.vmux = 1,
.amux = TV,
.tv = 1,
},{
.name = name_tv_mono,
.vmux = 1,
.amux = LINE2,
.tv = 1,
}},
.radio = {
.name = name_radio,
.amux = LINE2,
},
},
[SAA7134_BOARD_AVERMEDIA_305] = {
/* much like the "studio" version but without radio
* and another tuner (sirspiritus@yandex.ru) */
.name = "AverMedia AverTV/305",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_FQ1216ME,
.tda9887_conf = TDA9887_PRESENT,
.gpiomask = 0x3,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = LINE2,
.tv = 1,
},{
.name = name_comp1,
.vmux = 0,
.amux = LINE2,
},{
.name = name_comp2,
.vmux = 3,
.amux = LINE2,
},{
.name = name_svideo,
.vmux = 8,
.amux = LINE2,
}},
.mute = {
.name = name_mute,
.amux = LINE1,
},
},
[SAA7134_BOARD_FLYDVBTDUO] = {
/* LifeView FlyDVB-T DUO */
/* "Nico Sabbi <nsabbi@tiscali.it> */
.name = "LifeView FlyDVB-T DUO",
.audio_clock = 0x00200000,
.tuner_type = TUNER_PHILIPS_TDA8290,
// .gpiomask = 0xe000,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = TV,
// .gpio = 0x0000,
.tv = 1,
},{
.name = name_comp1, /* Composite signal on S-Video input */
.vmux = 0,
.amux = LINE2,
// .gpio = 0x4000,
},{
.name = name_comp2, /* Composite input */
.vmux = 3,
.amux = LINE2,
// .gpio = 0x4000,
},{
.name = name_svideo, /* S-Video signal on S-Video input */
.vmux = 8,
.amux = LINE2,
// .gpio = 0x4000,
}},
},
};
......@@ -1321,6 +1589,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
.subvendor = 0x153B,
.subdevice = 0x1143,
.driver_data = SAA7134_BOARD_CINERGY600,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
.subvendor = 0x153B,
.subdevice = 0x1158,
.driver_data = SAA7134_BOARD_CINERGY600_MK3,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
......@@ -1349,8 +1623,14 @@ struct pci_device_id saa7134_pci_tbl[] = {
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7135,
.subvendor = 0x5168,
.subdevice = 0x0212,
.driver_data = SAA7134_BOARD_FLYTVPLATINUM,
.subdevice = 0x0212, /* minipci, LR212 */
.driver_data = SAA7134_BOARD_FLYTVPLATINUM_MINI,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x5168,
.subdevice = 0x0214, /* Standard PCI, LR214WF */
.driver_data = SAA7134_BOARD_FLYTVPLATINUM_FM,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
......@@ -1375,6 +1655,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
.subvendor = PCI_VENDOR_ID_ASUSTEK,
.subdevice = 0x4842,
.driver_data = SAA7134_BOARD_ASUSTeK_TVFM7134,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = PCI_VENDOR_ID_ASUSTEK,
.subdevice = 0x4845,
.driver_data = SAA7135_BOARD_ASUSTeK_TVFM7135,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
......@@ -1452,6 +1738,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
.device = PCI_DEVICE_ID_PHILIPS_SAA7130,
.subvendor = 0x1461, /* Avermedia Technologies Inc */
.subdevice = 0x2115,
.driver_data = SAA7134_BOARD_AVERMEDIA_STUDIO_305,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7130,
.subvendor = 0x1461, /* Avermedia Technologies Inc */
.subdevice = 0x2108,
.driver_data = SAA7134_BOARD_AVERMEDIA_305,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
......@@ -1483,8 +1775,8 @@ struct pci_device_id saa7134_pci_tbl[] = {
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
.subvendor = 0x11bd,
.subdevice = 0x002d, /* 300i DVB-T + PAL */
.driver_data = SAA7134_BOARD_PINNACLE_PCTV_STEREO,
.subdevice = 0x002d,
.driver_data = SAA7134_BOARD_PINNACLE_300I_DVBT_PAL,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
......@@ -1509,20 +1801,43 @@ struct pci_device_id saa7134_pci_tbl[] = {
.subvendor = 0x153B,
.subdevice = 0x1152,
.driver_data = SAA7134_BOARD_CINERGY200,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7130,
.subvendor = 0x185b,
.subdevice = 0xc100,
.driver_data = SAA7134_BOARD_VIDEOMATE_TV_PVR,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7130,
.subvendor = 0x1131,
.subdevice = 0,
.driver_data = SAA7134_BOARD_SABRENT_SBTTVFM,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
.subvendor = 0x1461, /* Avermedia Technologies Inc */
.subdevice = 0x9715,
.driver_data = SAA7134_BOARD_AVERMEDIA_307,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
.subvendor = 0x185b,
.subdevice = 0xc200,
.driver_data = SAA7134_BOARD_VIDEOMATE_GOLD_PLUS,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
.subvendor = 0x1540,
.subdevice = 0x9524,
.driver_data = SAA7134_BOARD_PROVIDEO_PV952,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x5168,
.subdevice = 0x0306,
.driver_data = SAA7134_BOARD_FLYDVBTDUO,
},{
/* --- boards without eeprom + subsystem ID --- */
......@@ -1631,16 +1946,19 @@ int saa7134_board_init1(struct saa7134_dev *dev)
case SAA7134_BOARD_FLYVIDEO2000:
case SAA7134_BOARD_FLYVIDEO3000:
dev->has_remote = 1;
/* fall throuth */
case SAA7134_BOARD_FLYTVPLATINUM:
board_flyvideo(dev);
break;
case SAA7134_BOARD_CINERGY400:
case SAA7134_BOARD_CINERGY600:
case SAA7134_BOARD_CINERGY600_MK3:
case SAA7134_BOARD_ECS_TVP3XP:
case SAA7134_BOARD_ECS_TVP3XP_4CB5:
case SAA7134_BOARD_MD2819:
case SAA7134_BOARD_AVERMEDIA_STUDIO_305:
case SAA7134_BOARD_AVERMEDIA_305:
case SAA7134_BOARD_AVERMEDIA_307:
// case SAA7134_BOARD_SABRENT_SBTTVFM: /* not finished yet */
case SAA7134_BOARD_VIDEOMATE_TV_PVR:
dev->has_remote = 1;
break;
case SAA7134_BOARD_AVACSSMARTTV:
......@@ -1656,8 +1974,13 @@ int saa7134_board_init1(struct saa7134_dev *dev)
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000000);
msleep(1);
break;
}
if (dev->has_remote)
dev->irq2_mask |= (SAA7134_IRQ2_INTE_GPIO18 |
SAA7134_IRQ2_INTE_GPIO18A |
SAA7134_IRQ2_INTE_GPIO16 );
return 0;
}
......@@ -1676,6 +1999,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
: SAA7134_BOARD_BMK_MPEX_TUNER;
if (board == dev->board)
break;
dev->board = board;
printk("%s: board type fixup: %s\n", dev->name,
saa7134_boards[dev->board].name);
dev->tuner_type = saa7134_boards[dev->board].tuner_type;
......
drivers/media/video/saa7134/saa7134-core.c
View file @ 0d3430ba
/*
* $Id: saa7134-core.c,v 1.15 2004/11/07 14:44:59 kraxel Exp $
* $Id: saa7134-core.c,v 1.28 2005/02/22 09:56:29 kraxel Exp $
*
* device driver for philips saa7134 based TV cards
* driver core
......@@ -25,6 +25,7 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/kmod.h>
......@@ -88,7 +89,7 @@ MODULE_PARM_DESC(card, "card type");
static DECLARE_MUTEX(devlist_lock);
LIST_HEAD(saa7134_devlist);
static LIST_HEAD(mops_list);
unsigned int saa7134_devcount;
static unsigned int saa7134_devcount;
#define dprintk(fmt, arg...) if (core_debug) \
printk(KERN_DEBUG "%s/core: " fmt, dev->name , ## arg)
......@@ -620,7 +621,7 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id, struct pt_regs *regs)
dump_statusregs(dev);
#endif
if (report & SAA7134_IRQ_REPORT_INTL)
if (report & SAA7134_IRQ_REPORT_RDCAP /* _INTL */)
saa7134_irq_video_intl(dev);
if ((report & SAA7134_IRQ_REPORT_DONE_RA0) &&
......@@ -642,8 +643,8 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id, struct pt_regs *regs)
SAA7134_IRQ_REPORT_GPIO18)) &&
dev->remote)
saa7134_input_irq(dev);
}
};
if (10 == loop) {
print_irqstatus(dev,loop,report,status);
if (report & SAA7134_IRQ_REPORT_PE) {
......@@ -651,6 +652,13 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id, struct pt_regs *regs)
printk(KERN_WARNING "%s/irq: looping -- "
"clearing PE (parity error!) enable bit\n",dev->name);
saa_clearl(SAA7134_IRQ2,SAA7134_IRQ2_INTE_PE);
} else if (report & (SAA7134_IRQ_REPORT_GPIO16 |
SAA7134_IRQ_REPORT_GPIO18)) {
/* disable gpio IRQs */
printk(KERN_WARNING "%s/irq: looping -- "
"clearing GPIO enable bits\n",dev->name);
saa_clearl(SAA7134_IRQ2, (SAA7134_IRQ2_INTE_GPIO16 |
SAA7134_IRQ2_INTE_GPIO18));
} else {
/* disable all irqs */
printk(KERN_WARNING "%s/irq: looping -- "
......@@ -725,20 +733,7 @@ static int saa7134_hwinit2(struct saa7134_dev *dev)
/* enable IRQ's */
saa_writel(SAA7134_IRQ1, 0);
saa_writel(SAA7134_IRQ2,
SAA7134_IRQ2_INTE_GPIO18 |
SAA7134_IRQ2_INTE_GPIO18A |
SAA7134_IRQ2_INTE_GPIO16 |
SAA7134_IRQ2_INTE_SC2 |
SAA7134_IRQ2_INTE_SC1 |
SAA7134_IRQ2_INTE_SC0 |
/* SAA7134_IRQ2_INTE_DEC5 | FIXME: TRIG_ERR ??? */
SAA7134_IRQ2_INTE_DEC3 |
SAA7134_IRQ2_INTE_DEC2 |
/* SAA7134_IRQ2_INTE_DEC1 | */
SAA7134_IRQ2_INTE_DEC0 |
SAA7134_IRQ2_INTE_PE |
SAA7134_IRQ2_INTE_AR);
saa_writel(SAA7134_IRQ2, dev->irq2_mask);
return 0;
}
......@@ -959,6 +954,13 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
}
/* initialize hardware #1 */
dev->irq2_mask =
SAA7134_IRQ2_INTE_DEC3 |
SAA7134_IRQ2_INTE_DEC2 |
SAA7134_IRQ2_INTE_DEC1 |
SAA7134_IRQ2_INTE_DEC0 |
SAA7134_IRQ2_INTE_PE |
SAA7134_IRQ2_INTE_AR;
saa7134_board_init1(dev);
saa7134_hwinit1(dev);
......@@ -1060,6 +1062,9 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
}
list_add_tail(&dev->devlist,&saa7134_devlist);
up(&devlist_lock);
/* check for signal */
saa7134_irq_video_intl(dev);
return 0;
fail5:
......@@ -1207,6 +1212,8 @@ static int saa7134_init(void)
static void saa7134_fini(void)
{
if (pending_registered)
unregister_module_notifier(&pending_notifier);
pci_unregister_driver(&saa7134_pci_driver);
}
......
drivers/media/video/saa7134/saa7134-dvb.c
View file @ 0d3430ba
/*
* $Id: saa7134-dvb.c,v 1.4 2004/11/07 14:44:59 kraxel Exp $
* $Id: saa7134-dvb.c,v 1.12 2005/02/18 12:28:29 kraxel Exp $
*
* (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
*
......@@ -30,35 +30,211 @@
#include "saa7134-reg.h"
#include "saa7134.h"
#include "dvb-pll.h"
#include "mt352.h"
#include "mt352_priv.h" /* FIXME */
#include "tda1004x.h"
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
MODULE_LICENSE("GPL");
static unsigned int antenna_pwr = 0;
module_param(antenna_pwr, int, 0444);
MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
/* ------------------------------------------------------------------ */
static int dvb_init(struct saa7134_dev *dev)
static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on)
{
printk("%s: %s\n",dev->name,__FUNCTION__);
u32 ok;
if (!on) {
saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26));
saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
return 0;
}
saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26));
saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
udelay(10);
saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 28));
saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
udelay(10);
saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
udelay(10);
ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27);
printk("%s: %s %s\n", dev->name, __FUNCTION__,
ok ? "on" : "off");
if (!ok)
saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
return ok;
}
static int mt352_pinnacle_init(struct dvb_frontend* fe)
{
static u8 clock_config [] = { CLOCK_CTL, 0x3d, 0x28 };
static u8 reset [] = { RESET, 0x80 };
static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 };
static u8 capt_range_cfg[] = { CAPT_RANGE, 0x31 };
static u8 fsm_ctl_cfg[] = { 0x7b, 0x04 };
static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x0f };
static u8 scan_ctl_cfg [] = { SCAN_CTL, 0x0d };
static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 };
struct saa7134_dev *dev= fe->dvb->priv;
printk("%s: %s called\n",dev->name,__FUNCTION__);
mt352_write(fe, clock_config, sizeof(clock_config));
udelay(200);
mt352_write(fe, reset, sizeof(reset));
mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
mt352_write(fe, agc_cfg, sizeof(agc_cfg));
mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg));
mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg));
mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg));
mt352_write(fe, irq_cfg, sizeof(irq_cfg));
return 0;
}
static int mt352_pinnacle_pll_set(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params,
u8* pllbuf)
{
static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
static int off = TDA9887_PRESENT | TDA9887_PORT2_ACTIVE;
struct saa7134_dev *dev = fe->dvb->priv;
struct v4l2_frequency f;
/* set frequency (mt2050) */
f.tuner = 0;
f.type = V4L2_TUNER_DIGITAL_TV;
f.frequency = params->frequency / 1000 * 16 / 1000;
saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&off);
pinnacle_antenna_pwr(dev, antenna_pwr);
/* mt352 setup */
mt352_pinnacle_init(fe);
pllbuf[0] = 0xc2;
pllbuf[1] = 0x00;
pllbuf[2] = 0x00;
pllbuf[3] = 0x80;
pllbuf[4] = 0x00;
return 0;
}
static struct mt352_config pinnacle_300i = {
.demod_address = 0x3c >> 1,
.adc_clock = 20333,
.if2 = 36150,
.no_tuner = 1,
.demod_init = mt352_pinnacle_init,
.pll_set = mt352_pinnacle_pll_set,
};
/* ------------------------------------------------------------------ */
static int medion_cardbus_init(struct dvb_frontend* fe)
{
/* anything to do here ??? */
return 0;
}
static int medion_cardbus_pll_set(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params)
{
struct saa7134_dev *dev = fe->dvb->priv;
struct v4l2_frequency f;
/*
* this instructs tuner.o to set the frequency, the call will
* end up in tuner_command(), VIDIOC_S_FREQUENCY switch.
* tda9887.o will see that as well.
*/
f.tuner = 0;
f.type = V4L2_TUNER_DIGITAL_TV;
f.frequency = params->frequency / 1000 * 16 / 1000;
saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
return 0;
}
static int fe_request_firmware(struct dvb_frontend* fe,
const struct firmware **fw, char* name)
{
struct saa7134_dev *dev = fe->dvb->priv;
return request_firmware(fw, name, &dev->pci->dev);
}
struct tda1004x_config medion_cardbus = {
.demod_address = 0x08, /* not sure this is correct */
.invert = 0,
.invert_oclk = 0,
.pll_init = medion_cardbus_init,
.pll_set = medion_cardbus_pll_set,
.request_firmware = fe_request_firmware,
};
/* ------------------------------------------------------------------ */
static int dvb_init(struct saa7134_dev *dev)
{
/* init struct videobuf_dvb */
dev->ts.nr_bufs = 32;
dev->ts.nr_packets = 32*4;
dev->dvb.name = dev->name;
videobuf_queue_init(&dev->dvb.dvbq, &saa7134_ts_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_TOP,
V4L2_FIELD_ALTERNATE,
sizeof(struct saa7134_buf),
dev);
/* TODO: init frontend */
switch (dev->board) {
case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
printk("%s: pinnacle 300i dvb setup\n",dev->name);
dev->dvb.frontend = mt352_attach(&pinnacle_300i,
&dev->i2c_adap);
break;
case SAA7134_BOARD_MD7134:
dev->dvb.frontend = tda10046_attach(&medion_cardbus,
&dev->i2c_adap);
if (NULL == dev->dvb.frontend)
printk("%s: Hmm, looks like this is the old MD7134 "
"version without DVB-T support\n",dev->name);
break;
default:
printk("%s: Huh? unknown DVB card?\n",dev->name);
break;
}
if (NULL == dev->dvb.frontend) {
printk("%s: frontend initialization failed\n",dev->name);
return -1;
}
/* register everything else */
return videobuf_dvb_register(&dev->dvb);
return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev);
}
static int dvb_fini(struct saa7134_dev *dev)
{
static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
printk("%s: %s\n",dev->name,__FUNCTION__);
switch (dev->board) {
case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
/* otherwise we don't detect the tuner on next insmod */
saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
break;
};
videobuf_dvb_unregister(&dev->dvb);
return 0;
}
......@@ -86,6 +262,5 @@ module_exit(dvb_unregister);
/*
* Local variables:
* c-basic-offset: 8
* compile-command: "make DVB=1"
* End:
*/
drivers/media/video/saa7134/saa7134-empress.c
View file @ 0d3430ba
/*
* $Id: saa7134-empress.c,v 1.3 2004/11/07 13:17:15 kraxel Exp $
* $Id: saa7134-empress.c,v 1.10 2005/02/03 10:24:33 kraxel Exp $
*
* (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
*
......@@ -21,6 +21,7 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/delay.h>
......@@ -50,16 +51,21 @@ MODULE_PARM_DESC(debug,"enable debug messages");
static void ts_reset_encoder(struct saa7134_dev* dev)
{
if (!dev->empress_started)
return;
saa_writeb(SAA7134_SPECIAL_MODE, 0x00);
msleep(10);
saa_writeb(SAA7134_SPECIAL_MODE, 0x01);
msleep(100);
dev->empress_started = 0;
}
static int ts_init_encoder(struct saa7134_dev* dev, void* arg)
static int ts_init_encoder(struct saa7134_dev* dev)
{
ts_reset_encoder(dev);
saa7134_i2c_call_clients(dev, MPEG_SETPARAMS, arg);
saa7134_i2c_call_clients(dev, VIDIOC_S_MPEGCOMP, NULL);
dev->empress_started = 1;
return 0;
}
......@@ -81,18 +87,19 @@ static int ts_open(struct inode *inode, struct file *file)
return -ENODEV;
dprintk("open minor=%d\n",minor);
down(&dev->empress_tsq.lock);
err = -EBUSY;
if (dev->empress_users)
if (down_trylock(&dev->empress_tsq.lock))
goto done;
if (dev->empress_users)
goto done_up;
dev->empress_users++;
file->private_data = dev;
ts_init_encoder(dev, NULL);
err = 0;
done:
done_up:
up(&dev->empress_tsq.lock);
done:
return err;
}
......@@ -105,6 +112,7 @@ static int ts_release(struct inode *inode, struct file *file)
down(&dev->empress_tsq.lock);
if (dev->empress_tsq.reading)
videobuf_read_stop(&dev->empress_tsq);
videobuf_mmap_free(&dev->empress_tsq);
dev->empress_users--;
/* stop the encoder */
......@@ -119,6 +127,9 @@ ts_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
{
struct saa7134_dev *dev = file->private_data;
if (!dev->empress_started)
ts_init_encoder(dev);
return videobuf_read_stream(&dev->empress_tsq,
data, count, ppos, 0,
file->f_flags & O_NONBLOCK);
......@@ -281,8 +292,13 @@ static int ts_do_ioctl(struct inode *inode, struct file *file,
case VIDIOC_S_CTRL:
return saa7134_common_ioctl(dev, cmd, arg);
case MPEG_SETPARAMS:
return ts_init_encoder(dev, arg);
case VIDIOC_S_MPEGCOMP:
saa7134_i2c_call_clients(dev, VIDIOC_S_MPEGCOMP, arg);
ts_init_encoder(dev);
return 0;
case VIDIOC_G_MPEGCOMP:
saa7134_i2c_call_clients(dev, VIDIOC_G_MPEGCOMP, arg);
return 0;
default:
return -ENOIOCTLCMD;
......@@ -320,6 +336,26 @@ static struct video_device saa7134_empress_template =
.minor = -1,
};
static void empress_signal_update(void* data)
{
struct saa7134_dev* dev = (struct saa7134_dev*) data;
if (dev->nosignal) {
dprintk("no video signal\n");
ts_reset_encoder(dev);
} else {
dprintk("video signal acquired\n");
if (dev->empress_users)
ts_init_encoder(dev);
}
}
static void empress_signal_change(struct saa7134_dev *dev)
{
schedule_work(&dev->empress_workqueue);
}
static int empress_init(struct saa7134_dev *dev)
{
int err;
......@@ -335,6 +371,8 @@ static int empress_init(struct saa7134_dev *dev)
"%s empress (%s)", dev->name,
saa7134_boards[dev->board].name);
INIT_WORK(&dev->empress_workqueue, empress_signal_update, (void*) dev);
err = video_register_device(dev->empress_dev,VFL_TYPE_GRABBER,
empress_nr[dev->nr]);
if (err < 0) {
......@@ -353,6 +391,8 @@ static int empress_init(struct saa7134_dev *dev)
V4L2_FIELD_ALTERNATE,
sizeof(struct saa7134_buf),
dev);
empress_signal_update(dev);
return 0;
}
......@@ -362,6 +402,7 @@ static int empress_fini(struct saa7134_dev *dev)
if (NULL == dev->empress_dev)
return 0;
flush_scheduled_work();
video_unregister_device(dev->empress_dev);
dev->empress_dev = NULL;
return 0;
......@@ -371,6 +412,7 @@ static struct saa7134_mpeg_ops empress_ops = {
.type = SAA7134_MPEG_EMPRESS,
.init = empress_init,
.fini = empress_fini,
.signal_change = empress_signal_change,
};
static int __init empress_register(void)
......
drivers/media/video/saa7134/saa7134-i2c.c
View file @ 0d3430ba
/*
* $Id: saa7134-i2c.c,v 1.7 2004/11/07 13:17:15 kraxel Exp $
* $Id: saa7134-i2c.c,v 1.10 2005/01/24 17:37:23 kraxel Exp $
*
* device driver for philips saa7134 based TV cards
* i2c interface support
......@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/delay.h>
......@@ -205,7 +206,8 @@ static inline int i2c_send_byte(struct saa7134_dev *dev,
dword &= 0x0f;
dword |= (attr << 6);
dword |= ((__u32)data << 8);
dword |= 0x00 << 16;
dword |= 0x00 << 16; /* 100 kHz */
// dword |= 0x40 << 16; /* 400 kHz */
dword |= 0xf0 << 24;
saa_writel(SAA7134_I2C_ATTR_STATUS >> 2, dword);
#endif
......@@ -248,13 +250,24 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
if (!i2c_reset(dev))
return -EIO;
d2printk("start xfer\n");
d1printk(KERN_DEBUG "%s: i2c xfer:",dev->name);
for (i = 0; i < num; i++) {
if (!(msgs[i].flags & I2C_M_NOSTART) || 0 == i) {
/* send address */
d2printk("send address\n");
addr = msgs[i].addr << 1;
if (msgs[i].flags & I2C_M_RD)
addr |= 1;
if (i > 0 && msgs[i].flags & I2C_M_RD) {
/* workaround for a saa7134 i2c bug
* needed to talk to the mt352 demux
* thanks to pinnacle for the hint */
int quirk = 0xfd;
d1printk(" [%02x quirk]",quirk);
i2c_send_byte(dev,START,quirk);
i2c_recv_byte(dev);
}
d1printk(" < %02x", addr);
rc = i2c_send_byte(dev,START,addr);
if (rc < 0)
......@@ -262,6 +275,7 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
}
if (msgs[i].flags & I2C_M_RD) {
/* read bytes */
d2printk("read bytes\n");
for (byte = 0; byte < msgs[i].len; byte++) {
d1printk(" =");
rc = i2c_recv_byte(dev);
......@@ -272,6 +286,7 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
}
} else {
/* write bytes */
d2printk("write bytes\n");
for (byte = 0; byte < msgs[i].len; byte++) {
data = msgs[i].buf[byte];
d1printk(" %02x", data);
......@@ -281,6 +296,7 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
}
}
}
d2printk("xfer done\n");
d1printk(" >");
i2c_set_attr(dev,STOP);
rc = -EIO;
......@@ -313,18 +329,6 @@ static u32 functionality(struct i2c_adapter *adap)
return I2C_FUNC_SMBUS_EMUL;
}
#ifndef I2C_PEC
static void inc_use(struct i2c_adapter *adap)
{
MOD_INC_USE_COUNT;
}
static void dec_use(struct i2c_adapter *adap)
{
MOD_DEC_USE_COUNT;
}
#endif
static int attach_inform(struct i2c_client *client)
{
struct saa7134_dev *dev = client->adapter->algo_data;
......@@ -345,12 +349,7 @@ static struct i2c_algorithm saa7134_algo = {
};
static struct i2c_adapter saa7134_adap_template = {
#ifdef I2C_PEC
.owner = THIS_MODULE,
#else
.inc_use = inc_use,
.dec_use = dec_use,
#endif
#ifdef I2C_CLASS_TV_ANALOG
.class = I2C_CLASS_TV_ANALOG,
#endif
......
drivers/media/video/saa7134/saa7134-input.c
View file @ 0d3430ba
/*
* $Id: saa7134-input.c,v 1.12 2004/11/07 13:17:15 kraxel Exp $
* $Id: saa7134-input.c,v 1.16 2004/12/10 12:33:39 kraxel Exp $
*
* handle saa7134 IR remotes via linux kernel input layer.
*
......@@ -20,6 +20,7 @@
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/sched.h>
......@@ -258,6 +259,55 @@ static IR_KEYTAB_TYPE md2819_codes[IR_KEYTAB_SIZE] = {
[ 17 ] = KEY_CHANNELDOWN, // CHANNEL/PAGE-
[ 49 ] = KEY_CHANNELUP // CHANNEL/PAGE+
};
static IR_KEYTAB_TYPE videomate_tv_pvr_codes[IR_KEYTAB_SIZE] = {
[ 20 ] = KEY_MUTE,
[ 36 ] = KEY_ZOOM,
[ 1 ] = KEY_DVD,
[ 35 ] = KEY_RADIO,
[ 0 ] = KEY_TV,
[ 10 ] = KEY_REWIND,
[ 8 ] = KEY_PLAYPAUSE,
[ 15 ] = KEY_FORWARD,
[ 2 ] = KEY_PREVIOUS,
[ 7 ] = KEY_STOP,
[ 6 ] = KEY_NEXT,
[ 12 ] = KEY_UP,
[ 14 ] = KEY_DOWN,
[ 11 ] = KEY_LEFT,
[ 13 ] = KEY_RIGHT,
[ 17 ] = KEY_OK,
[ 3 ] = KEY_MENU,
[ 9 ] = KEY_SETUP,
[ 5 ] = KEY_VIDEO,
[ 34 ] = KEY_CHANNEL,
[ 18 ] = KEY_VOLUMEUP,
[ 21 ] = KEY_VOLUMEDOWN,
[ 16 ] = KEY_CHANNELUP,
[ 19 ] = KEY_CHANNELDOWN,
[ 4 ] = KEY_RECORD,
[ 22 ] = KEY_KP1,
[ 23 ] = KEY_KP2,
[ 24 ] = KEY_KP3,
[ 25 ] = KEY_KP4,
[ 26 ] = KEY_KP5,
[ 27 ] = KEY_KP6,
[ 28 ] = KEY_KP7,
[ 29 ] = KEY_KP8,
[ 30 ] = KEY_KP9,
[ 31 ] = KEY_KP0,
[ 32 ] = KEY_LANGUAGE,
[ 33 ] = KEY_SLEEP,
};
/* ---------------------------------------------------------------------- */
static int build_key(struct saa7134_dev *dev)
......@@ -335,6 +385,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
break;
case SAA7134_BOARD_CINERGY400:
case SAA7134_BOARD_CINERGY600:
case SAA7134_BOARD_CINERGY600_MK3:
ir_codes = cinergy_codes;
mask_keycode = 0x00003f;
mask_keyup = 0x040000;
......@@ -353,6 +404,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
polling = 50; // ms
break;
case SAA7134_BOARD_MD2819:
case SAA7134_BOARD_AVERMEDIA_305:
case SAA7134_BOARD_AVERMEDIA_307:
ir_codes = md2819_codes;
mask_keycode = 0x0007C8;
......@@ -362,6 +414,12 @@ int saa7134_input_init1(struct saa7134_dev *dev)
saa_setb(SAA7134_GPIO_GPMODE0, 0x4);
saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4);
break;
case SAA7134_BOARD_VIDEOMATE_TV_PVR:
ir_codes = videomate_tv_pvr_codes;
mask_keycode = 0x00003F;
mask_keyup = 0x400000;
polling = 50; // ms
break;
}
if (NULL == ir_codes) {
printk("%s: Oops: IR config error [card=%d]\n",
......
drivers/media/video/saa7134/saa7134-oss.c
View file @ 0d3430ba
/*
* $Id: saa7134-oss.c,v 1.11 2004/11/07 13:17:15 kraxel Exp $
* $Id: saa7134-oss.c,v 1.13 2004/12/10 12:33:39 kraxel Exp $
*
* device driver for philips saa7134 based TV cards
* oss dsp interface
......@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/soundcard.h>
......@@ -543,6 +544,7 @@ mixer_recsrc_7134(struct saa7134_dev *dev)
break;
case LINE1:
case LINE2:
case LINE2_LEFT:
analog_io = (LINE1 == dev->oss.input) ? 0x00 : 0x08;
rate = (32000 == dev->oss.rate) ? 0x01 : 0x03;
saa_andorb(SAA7134_ANALOG_IO_SELECT, 0x08, analog_io);
......@@ -566,6 +568,7 @@ mixer_recsrc_7133(struct saa7134_dev *dev)
value = 0xbbbb32; /* AUX1 */
break;
case LINE2:
case LINE2_LEFT:
value = 0xbbbb54; /* AUX2 */
break;
}
......@@ -608,6 +611,7 @@ mixer_level(struct saa7134_dev *dev, enum saa7134_audio_in src, int level)
(100 == level) ? 0x00 : 0x10);
break;
case LINE2:
case LINE2_LEFT:
saa_andorb(SAA7134_ANALOG_IO_SELECT, 0x20,
(100 == level) ? 0x00 : 0x20);
break;
......
drivers/media/video/saa7134/saa7134-ts.c
View file @ 0d3430ba
/*
* $Id: saa7134-ts.c,v 1.12 2004/11/07 13:17:15 kraxel Exp $
* $Id: saa7134-ts.c,v 1.14 2005/02/03 10:24:33 kraxel Exp $
*
* device driver for philips saa7134 based TV cards
* video4linux video interface
......@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/delay.h>
......@@ -220,10 +221,10 @@ void saa7134_irq_ts_done(struct saa7134_dev *dev, unsigned long status)
if (dev->ts_q.curr) {
field = dev->ts_q.curr->vb.field;
if (field == V4L2_FIELD_TOP) {
if ((status & 0x100000) != 0x100000)
if ((status & 0x100000) != 0x000000)
goto done;
} else {
if ((status & 0x100000) != 0x000000)
if ((status & 0x100000) != 0x100000)
goto done;
}
saa7134_buffer_finish(dev,&dev->ts_q,STATE_DONE);
......
drivers/media/video/saa7134/saa7134-tvaudio.c
View file @ 0d3430ba
/*
* $Id: saa7134-tvaudio.c,v 1.17 2004/11/07 13:17:15 kraxel Exp $
* $Id: saa7134-tvaudio.c,v 1.22 2005/01/07 13:11:19 kraxel Exp $
*
* device driver for philips saa7134 based TV cards
* tv audio decoder (fm stereo, nicam, ...)
......@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/delay.h>
......@@ -237,13 +238,14 @@ static void mute_input_7134(struct saa7134_dev *dev)
if (PCI_DEVICE_ID_PHILIPS_SAA7134 == dev->pci->device)
/* 7134 mute */
saa_writeb(SAA7134_AUDIO_MUTE_CTRL, mute ? 0xff : 0xbb);
saa_writeb(SAA7134_AUDIO_MUTE_CTRL, mute ? 0xbf : 0xbb);
/* switch internal audio mux */
switch (in->amux) {
case TV: ausel=0xc0; ics=0x00; ocs=0x02; break;
case LINE1: ausel=0x80; ics=0x00; ocs=0x00; break;
case LINE2: ausel=0x80; ics=0x08; ocs=0x01; break;
case LINE2_LEFT: ausel=0x80; ics=0x08; ocs=0x05; break;
}
saa_andorb(SAA7134_AUDIO_FORMAT_CTRL, 0xc0, ausel);
saa_andorb(SAA7134_ANALOG_IO_SELECT, 0x08, ics);
......@@ -437,15 +439,16 @@ static int tvaudio_getstereo(struct saa7134_dev *dev, struct saa7134_tvaudio *au
nicam = saa_readb(SAA7134_NICAM_STATUS);
dprintk("getstereo: nicam=0x%x\n",nicam);
switch (nicam & 0x0b) {
case 0x08:
retval = V4L2_TUNER_SUB_MONO;
break;
case 0x09:
retval = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
break;
case 0x0a:
retval = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
break;
case 0x08:
default:
retval = V4L2_TUNER_SUB_MONO;
break;
}
break;
}
......@@ -748,9 +751,16 @@ static int mute_input_7133(struct saa7134_dev *dev)
int mask;
switch (dev->input->amux) {
case TV: reg = 0x02; break;
case LINE1: reg = 0x00; break;
case LINE2: reg = 0x01; break;
case TV:
reg = 0x02;
break;
case LINE1:
reg = 0x00;
break;
case LINE2:
case LINE2_LEFT:
reg = 0x01;
break;
}
if (dev->ctl_mute)
reg = 0x07;
......@@ -869,6 +879,21 @@ static int tvaudio_thread_ddep(void *data)
/* ------------------------------------------------------------------ */
/* common stuff + external entry points */
static void saa7134_enable_i2s(struct saa7134_dev *dev)
{
int i2s_format;
if (!card_is_empress(dev))
return;
i2s_format = (dev->input->amux == TV) ? 0x00 : 0x01;
/* enable I2S audio output for the mpeg encoder */
saa_writeb(SAA7134_I2S_OUTPUT_SELECT, 0x80);
saa_writeb(SAA7134_I2S_OUTPUT_FORMAT, i2s_format);
saa_writeb(SAA7134_I2S_OUTPUT_LEVEL, 0x0F);
saa_writeb(SAA7134_I2S_AUDIO_OUTPUT, 0x01);
}
int saa7134_tvaudio_rx2mode(u32 rx)
{
u32 mode;
......@@ -911,6 +936,7 @@ void saa7134_tvaudio_setinput(struct saa7134_dev *dev,
mute_input_7133(dev);
break;
}
saa7134_enable_i2s(dev);
}
void saa7134_tvaudio_setvolume(struct saa7134_dev *dev, int level)
......@@ -946,18 +972,6 @@ int saa7134_tvaudio_init2(struct saa7134_dev *dev)
DECLARE_MUTEX_LOCKED(sem);
int (*my_thread)(void *data) = NULL;
/* enable I2S audio output */
if (card_is_empress(dev)) {
int i2sform = (48000 == dev->oss.rate)
? 0x01 : 0x00;
/* enable I2S output */
saa_writeb(SAA7134_I2S_OUTPUT_SELECT, 0x80);
saa_writeb(SAA7134_I2S_OUTPUT_FORMAT, i2sform);
saa_writeb(SAA7134_I2S_OUTPUT_LEVEL, 0x0F);
saa_writeb(SAA7134_I2S_AUDIO_OUTPUT, 0x01);
}
switch (dev->pci->device) {
case PCI_DEVICE_ID_PHILIPS_SAA7134:
my_thread = tvaudio_thread;
......@@ -977,9 +991,10 @@ int saa7134_tvaudio_init2(struct saa7134_dev *dev)
if (dev->thread.pid < 0)
printk(KERN_WARNING "%s: kernel_thread() failed\n",
dev->name);
wake_up_interruptible(&dev->thread.wq);
saa7134_tvaudio_do_scan(dev);
}
saa7134_enable_i2s(dev);
return 0;
}
......
drivers/media/video/saa7134/saa7134-vbi.c
View file @ 0d3430ba
/*
* $Id: saa7134-vbi.c,v 1.5 2004/11/07 13:17:15 kraxel Exp $
* $Id: saa7134-vbi.c,v 1.6 2004/12/10 12:33:39 kraxel Exp $
*
* device driver for philips saa7134 based TV cards
* video4linux video interface
......@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/slab.h>
......
drivers/media/video/saa7134/saa7134-video.c
View file @ 0d3430ba
/*
* $Id: saa7134-video.c,v 1.19 2004/11/07 14:44:59 kraxel Exp $
* $Id: saa7134-video.c,v 1.28 2005/02/15 15:59:35 kraxel Exp $
*
* device driver for philips saa7134 based TV cards
* video4linux video interface
......@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/slab.h>
......@@ -267,6 +268,24 @@ static struct saa7134_tvnorm tvnorms[] = {
.chroma_ctrl2 = 0x06,
.vgate_misc = 0x1c,
},{
.name = "PAL-60",
.id = V4L2_STD_PAL_60,
.h_start = 0,
.h_stop = 719,
.video_v_start = 22,
.video_v_stop = 22+239,
.vbi_v_start = 10, /* FIXME */
.vbi_v_stop = 21, /* FIXME */
.src_timing = 1,
.sync_control = 0x18,
.luma_control = 0x40,
.chroma_ctrl1 = 0x81,
.chroma_gain = 0x2a,
.chroma_ctrl2 = 0x06,
.vgate_misc = 0x1c,
}
};
#define TVNORMS ARRAY_SIZE(tvnorms)
......@@ -443,11 +462,10 @@ void res_free(struct saa7134_dev *dev, struct saa7134_fh *fh, unsigned int bits)
static void set_tvnorm(struct saa7134_dev *dev, struct saa7134_tvnorm *norm)
{
int luma_control,sync_control,mux,nosignal;
int luma_control,sync_control,mux;
dprintk("set tv norm = %s\n",norm->name);
dev->tvnorm = norm;
nosignal = (0 == (saa_readb(SAA7134_STATUS_VIDEO1) & 0x03));
mux = card_in(dev,dev->ctl_input).vmux;
luma_control = norm->luma_control;
......@@ -455,7 +473,7 @@ static void set_tvnorm(struct saa7134_dev *dev, struct saa7134_tvnorm *norm)
if (mux > 5)
luma_control |= 0x80; /* svideo */
if (noninterlaced || nosignal)
if (noninterlaced || dev->nosignal)
sync_control |= 0x20;
/* setup cropping */
......@@ -1359,6 +1377,9 @@ static int video_release(struct inode *inode, struct file *file)
res_free(dev,fh,RESOURCE_VBI);
}
/* free stuff */
videobuf_mmap_free(&fh->cap);
videobuf_mmap_free(&fh->vbi);
saa7134_pgtable_free(dev->pci,&fh->pt_cap);
saa7134_pgtable_free(dev->pci,&fh->pt_vbi);
......@@ -1472,6 +1493,7 @@ static int saa7134_try_fmt(struct saa7134_dev *dev, struct saa7134_fh *fh,
f->fmt.pix.width = maxw;
if (f->fmt.pix.height > maxh)
f->fmt.pix.height = maxh;
f->fmt.pix.width &= ~0x03;
f->fmt.pix.bytesperline =
(f->fmt.pix.width * fmt->depth) >> 3;
f->fmt.pix.sizeimage =
......@@ -2267,7 +2289,7 @@ int saa7134_video_init1(struct saa7134_dev *dev)
dev->ctl_hue = ctrl_by_id(V4L2_CID_HUE)->default_value;
dev->ctl_saturation = ctrl_by_id(V4L2_CID_SATURATION)->default_value;
dev->ctl_volume = ctrl_by_id(V4L2_CID_AUDIO_VOLUME)->default_value;
dev->ctl_mute = ctrl_by_id(V4L2_CID_AUDIO_MUTE)->default_value;
dev->ctl_mute = 1; // ctrl_by_id(V4L2_CID_AUDIO_MUTE)->default_value;
dev->ctl_invert = ctrl_by_id(V4L2_CID_PRIVATE_INVERT)->default_value;
dev->ctl_automute = ctrl_by_id(V4L2_CID_PRIVATE_AUTOMUTE)->default_value;
......@@ -2317,24 +2339,31 @@ int saa7134_video_fini(struct saa7134_dev *dev)
void saa7134_irq_video_intl(struct saa7134_dev *dev)
{
static const char *st[] = {
"no signal", "found NTSC", "found PAL", "found SECAM" };
int norm;
norm = saa_readb(SAA7134_STATUS_VIDEO1) & 0x03;
dprintk("DCSDT: %s\n",st[norm]);
if (0 != norm) {
/* wake up tvaudio audio carrier scan thread */
saa7134_tvaudio_do_scan(dev);
if (!noninterlaced)
saa_clearb(SAA7134_SYNC_CTRL, 0x20);
} else {
"(no signal)", "NTSC", "PAL", "SECAM" };
u32 st1,st2;
st1 = saa_readb(SAA7134_STATUS_VIDEO1);
st2 = saa_readb(SAA7134_STATUS_VIDEO2);
dprintk("DCSDT: pll: %s, sync: %s, norm: %s\n",
(st1 & 0x40) ? "not locked" : "locked",
(st2 & 0x40) ? "no" : "yes",
st[st1 & 0x03]);
dev->nosignal = (st1 & 0x40) || (st2 & 0x40);
if (dev->nosignal) {
/* no video signal -> mute audio */
if (dev->ctl_automute)
dev->automute = 1;
saa7134_tvaudio_setmute(dev);
saa_setb(SAA7134_SYNC_CTRL, 0x20);
} else {
/* wake up tvaudio audio carrier scan thread */
saa7134_tvaudio_do_scan(dev);
if (!noninterlaced)
saa_clearb(SAA7134_SYNC_CTRL, 0x20);
}
if (dev->mops && dev->mops->signal_change)
dev->mops->signal_change(dev);
}
void saa7134_irq_video_done(struct saa7134_dev *dev, unsigned long status)
......
drivers/media/video/saa7134/saa7134.h
View file @ 0d3430ba
/*
* $Id: saa7134.h,v 1.27 2004/11/04 11:03:52 kraxel Exp $
* $Id: saa7134.h,v 1.38 2005/03/07 12:01:51 kraxel Exp $
*
* v4l2 device driver for philips saa7134 based TV cards
*
......@@ -64,6 +64,7 @@ enum saa7134_audio_in {
TV = 1,
LINE1 = 2,
LINE2 = 3,
LINE2_LEFT,
};
enum saa7134_video_out {
......@@ -156,11 +157,11 @@ struct saa7134_format {
#define SAA7134_BOARD_AVACSSMARTTV 32
#define SAA7134_BOARD_AVERMEDIA_DVD_EZMAKER 33
#define SAA7134_BOARD_NOVAC_PRIMETV7133 34
#define SAA7134_BOARD_AVERMEDIA_305 35
#define SAA7134_BOARD_AVERMEDIA_STUDIO_305 35
#define SAA7133_BOARD_UPMOST_PURPLE_TV 36
#define SAA7134_BOARD_ITEMS_MTV005 37
#define SAA7134_BOARD_CINERGY200 38
#define SAA7134_BOARD_FLYTVPLATINUM 39
#define SAA7134_BOARD_FLYTVPLATINUM_MINI 39
#define SAA7134_BOARD_VIDEOMATE_TV_PVR 40
#define SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUS 41
#define SAA7134_BOARD_SABRENT_SBTTVFM 42
......@@ -169,6 +170,14 @@ struct saa7134_format {
#define SAA7134_BOARD_AVERMEDIA_307 45
#define SAA7134_BOARD_AVERMEDIA_CARDBUS 46
#define SAA7134_BOARD_CINERGY400_CARDBUS 47
#define SAA7134_BOARD_CINERGY600_MK3 48
#define SAA7134_BOARD_VIDEOMATE_GOLD_PLUS 49
#define SAA7134_BOARD_PINNACLE_300I_DVBT_PAL 50
#define SAA7134_BOARD_PROVIDEO_PV952 51
#define SAA7134_BOARD_AVERMEDIA_305 52
#define SAA7135_BOARD_ASUSTeK_TVFM7135 53
#define SAA7134_BOARD_FLYTVPLATINUM_FM 54
#define SAA7134_BOARD_FLYDVBTDUO 55
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8
......@@ -355,6 +364,7 @@ struct saa7134_mpeg_ops {
struct list_head next;
int (*init)(struct saa7134_dev *dev);
int (*fini)(struct saa7134_dev *dev);
void (*signal_change)(struct saa7134_dev *dev);
};
/* global device status */
......@@ -390,6 +400,7 @@ struct saa7134_dev {
unsigned int tuner_type;
unsigned int tda9887_conf;
unsigned int gpio_value;
unsigned int irq2_mask;
/* i2c i/o */
struct i2c_adapter i2c_adap;
......@@ -437,6 +448,7 @@ struct saa7134_dev {
struct saa7134_input *hw_input;
unsigned int hw_mute;
int last_carrier;
int nosignal;
/* SAA7134_MPEG_* */
struct saa7134_ts ts;
......@@ -447,6 +459,8 @@ struct saa7134_dev {
struct video_device *empress_dev;
struct videobuf_queue empress_tsq;
unsigned int empress_users;
struct work_struct empress_workqueue;
int empress_started;
/* SAA7134_MPEG_DVB only */
struct videobuf_dvb dvb;
......@@ -476,7 +490,6 @@ struct saa7134_dev {
/* saa7134-core.c */
extern struct list_head saa7134_devlist;
extern unsigned int saa7134_devcount;
void saa7134_print_ioctl(char *name, unsigned int cmd);
void saa7134_track_gpio(struct saa7134_dev *dev, char *msg);
......
include/media/saa6752hs.h
View file @ 0d3430ba
......@@ -18,14 +18,14 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _SAA6752HS_H
#if 0 /* ndef _SAA6752HS_H */
#define _SAA6752HS_H
enum mpeg_bitrate_mode {
MPEG_BITRATE_MODE_VBR = 0, /* Variable bitrate */
MPEG_BITRATE_MODE_CBR = 1, /* Constant bitrate */
enum mpeg_video_bitrate_mode {
MPEG_VIDEO_BITRATE_MODE_VBR = 0, /* Variable bitrate */
MPEG_VIDEO_BITRATE_MODE_CBR = 1, /* Constant bitrate */
MPEG_BITRATE_MODE_MAX
MPEG_VIDEO_BITRATE_MODE_MAX
};
enum mpeg_audio_bitrate {
......@@ -35,16 +35,33 @@ enum mpeg_audio_bitrate {
MPEG_AUDIO_BITRATE_MAX
};
enum mpeg_video_format {
MPEG_VIDEO_FORMAT_D1 = 0,
MPEG_VIDEO_FORMAT_2_3_D1 = 1,
MPEG_VIDEO_FORMAT_1_2_D1 = 2,
MPEG_VIDEO_FORMAT_SIF = 3,
MPEG_VIDEO_FORMAT_MAX
};
#define MPEG_VIDEO_TARGET_BITRATE_MAX 27000
#define MPEG_VIDEO_MAX_BITRATE_MAX 27000
#define MPEG_TOTAL_BITRATE_MAX 27000
#define MPEG_PID_MAX ((1 << 14) - 1)
struct mpeg_params {
enum mpeg_bitrate_mode bitrate_mode;
enum mpeg_video_bitrate_mode video_bitrate_mode;
unsigned int video_target_bitrate;
unsigned int video_max_bitrate; // only used for VBR
enum mpeg_audio_bitrate audio_bitrate;
unsigned int total_bitrate;
unsigned int pmt_pid;
unsigned int video_pid;
unsigned int audio_pid;
unsigned int pcr_pid;
enum mpeg_video_format video_format;
};
#define MPEG_SETPARAMS _IOW('6',100,struct mpeg_params)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7