Commit 0e170c72 authored by Maik Broemme's avatar Maik Broemme Committed by Linus Torvalds

fbdev: intelfb: add support for the Intel Integrated Graphics Controller 965G/965GM

Add support for the 965G and 965GM graphic chipsets to the intelfb driver.  I
have a notebook with an Intel Mobile GM965/GL960 Integrated Graphics
Controller and with the attached patch the framebuffer comes up.  I have
tested it a bit with DirectFB to make sure it is working stable.

I also have an Intel Mobile GM945 and I compared the results, the programming
interface of the 9xx series from Intel is mostly the same, so I think the
patch should add all the functionality which the 945GM has.
Signed-off-by: default avatarMaik Broemme <mbroemme@plusserver.de>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Antonino Daplas <adaplas@pol.net>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 0aa16341
......@@ -14,6 +14,8 @@ graphics devices. These would include:
Intel 915GM
Intel 945G
Intel 945GM
Intel 965G
Intel 965GM
B. List of available options
......
......@@ -1119,7 +1119,7 @@ config FB_CARILLO_RANCH
This driver supports the LE80578 (Carillo Ranch) board
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)"
tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
depends on FB && EXPERIMENTAL && PCI && X86
select AGP
select AGP_INTEL
......@@ -1129,7 +1129,7 @@ config FB_INTEL
select FB_CFB_IMAGEBLIT
help
This driver supports the on-board graphics built in to the Intel
830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets.
830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
Say Y if you have and plan to use such a board.
If you say Y here and want DDC/I2C support you must first say Y to
......
......@@ -12,9 +12,9 @@
#endif
/*** Version/name ***/
#define INTELFB_VERSION "0.9.4"
#define INTELFB_VERSION "0.9.5"
#define INTELFB_MODULE_NAME "intelfb"
#define SUPPORTED_CHIPSETS "830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM"
#define SUPPORTED_CHIPSETS "830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM"
/*** Debug/feature defines ***/
......@@ -58,6 +58,8 @@
#define PCI_DEVICE_ID_INTEL_915GM 0x2592
#define PCI_DEVICE_ID_INTEL_945G 0x2772
#define PCI_DEVICE_ID_INTEL_945GM 0x27A2
#define PCI_DEVICE_ID_INTEL_965G 0x29A2
#define PCI_DEVICE_ID_INTEL_965GM 0x2A02
/* Size of MMIO region */
#define INTEL_REG_SIZE 0x80000
......@@ -158,6 +160,8 @@ enum intel_chips {
INTEL_915GM,
INTEL_945G,
INTEL_945GM,
INTEL_965G,
INTEL_965GM,
};
struct intelfb_hwstate {
......@@ -358,7 +362,9 @@ struct intelfb_info {
#define IS_I9XX(dinfo) (((dinfo)->chipset == INTEL_915G) || \
((dinfo)->chipset == INTEL_915GM) || \
((dinfo)->chipset == INTEL_945G) || \
((dinfo)->chipset==INTEL_945GM))
((dinfo)->chipset == INTEL_945GM) || \
((dinfo)->chipset == INTEL_965G) || \
((dinfo)->chipset == INTEL_965GM))
#ifndef FBIO_WAITFORVSYNC
#define FBIO_WAITFORVSYNC _IOW('F', 0x20, __u32)
......
......@@ -169,6 +169,8 @@ void intelfb_create_i2c_busses(struct intelfb_info *dinfo)
/* has some LVDS + tv-out */
case INTEL_945G:
case INTEL_945GM:
case INTEL_965G:
case INTEL_965GM:
/* SDVO ports have a single control bus - 2 devices */
dinfo->output[i].type = INTELFB_OUTPUT_SDVO;
intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].i2c_bus,
......
......@@ -2,7 +2,7 @@
* intelfb
*
* Linux framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/
* 945G/945GM integrated graphics chips.
* 945G/945GM/965G/965GM integrated graphics chips.
*
* Copyright © 2002, 2003 David Dawes <dawes@xfree86.org>
* 2004 Sylvain Meyer
......@@ -99,6 +99,9 @@
* Add vram option to reserve more memory than stolen by BIOS
* Fix intelfbhw_pan_display typo
* Add __initdata annotations
*
* 04/2008 - Version 0.9.5
* Add support for 965G/965GM. (Maik Broemme <mbroemme@plusserver.de>)
*/
#include <linux/module.h>
......@@ -180,6 +183,8 @@ static struct pci_device_id intelfb_pci_table[] __devinitdata = {
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915GM },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945G },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945GM },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_965G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_965G },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_965GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_965GM },
{ 0, }
};
......@@ -549,7 +554,10 @@ static int __devinit intelfb_pci_register(struct pci_dev *pdev,
if ((ent->device == PCI_DEVICE_ID_INTEL_915G) ||
(ent->device == PCI_DEVICE_ID_INTEL_915GM) ||
(ent->device == PCI_DEVICE_ID_INTEL_945G) ||
(ent->device == PCI_DEVICE_ID_INTEL_945GM)) {
(ent->device == PCI_DEVICE_ID_INTEL_945GM) ||
(ent->device == PCI_DEVICE_ID_INTEL_965G) ||
(ent->device == PCI_DEVICE_ID_INTEL_965GM)) {
aperture_bar = 2;
mmio_bar = 0;
}
......
......@@ -143,6 +143,18 @@ int intelfbhw_get_chipset(struct pci_dev *pdev, struct intelfb_info *dinfo)
dinfo->mobile = 1;
dinfo->pll_index = PLLS_I9xx;
return 0;
case PCI_DEVICE_ID_INTEL_965G:
dinfo->name = "Intel(R) 965G";
dinfo->chipset = INTEL_965G;
dinfo->mobile = 0;
dinfo->pll_index = PLLS_I9xx;
return 0;
case PCI_DEVICE_ID_INTEL_965GM:
dinfo->name = "Intel(R) 965GM";
dinfo->chipset = INTEL_965GM;
dinfo->mobile = 1;
dinfo->pll_index = PLLS_I9xx;
return 0;
default:
return 1;
}
......@@ -174,7 +186,9 @@ int intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size,
case PCI_DEVICE_ID_INTEL_915GM:
case PCI_DEVICE_ID_INTEL_945G:
case PCI_DEVICE_ID_INTEL_945GM:
/* 915 and 945 chipsets support a 256MB aperture.
case PCI_DEVICE_ID_INTEL_965G:
case PCI_DEVICE_ID_INTEL_965GM:
/* 915, 945 and 965 chipsets support a 256MB aperture.
Aperture size is determined by inspected the
base address of the aperture. */
if (pci_resource_start(pdev, 2) & 0x08000000)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment