net: dp83822: disable rx error interrupt

Some RX errors, notably when disconnecting the cable, increase the RCSR
register. Once half full (0x7fff), an interrupt flood is generated. I
measured ~3k/s interrupts even after the RX errors transfer was
stopped.

Since we don't read and clear the RCSR register, we should disable this
interrupt.

Fixes: 87461f7a ("net: phy: DP83822 initial driver submission")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/phy/dp83822.c

@@ -229,8 +229,7 @@ static int dp83822_config_intr(struct phy_device *phydev)
 		if (misr_status < 0)
 			return misr_status;
 
-		misr_status |= (DP83822_RX_ERR_HF_INT_EN |
-				DP83822_LINK_STAT_INT_EN |
+		misr_status |= (DP83822_LINK_STAT_INT_EN |
 				DP83822_ENERGY_DET_INT_EN |
 				DP83822_LINK_QUAL_INT_EN);