Commit 0e95c69b authored by Ingo Molnar's avatar Ingo Molnar

Merge branch 'rcu/next' of...

Merge branch 'rcu/next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu

Pull RCU updates from Paul E. McKenney.

Major changes:

" 1.	Update RCU documentation.  These were posted to LKML at
	http://article.gmane.org/gmane.linux.kernel/1566994.

  2.	Miscellaneous fixes.  These were posted to LKML at
	http://article.gmane.org/gmane.linux.kernel/1567027.

  3.	Grace-period-related changes, primarily to aid in debugging,
	inspired by a -rt debugging session.  These were posted to
	LKML at http://article.gmane.org/gmane.linux.kernel/1567076.

  4.	Idle entry/exit changes, primarily to address issues located
	by Tibor Billes.  These were posted to LKML at
	http://article.gmane.org/gmane.linux.kernel/1567096.

  5.	Code reorganization moving RCU's source files from kernel
	to kernel/rcu.  This was posted to LKML at
	http://article.gmane.org/gmane.linux.kernel/1577344."
Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
parents 04919afb 4102adab
......@@ -87,7 +87,10 @@ X!Iinclude/linux/kobject.h
!Ekernel/printk/printk.c
!Ekernel/panic.c
!Ekernel/sys.c
!Ekernel/rcupdate.c
!Ekernel/rcu/srcu.c
!Ekernel/rcu/tree.c
!Ekernel/rcu/tree_plugin.h
!Ekernel/rcu/update.c
</sect1>
<sect1><title>Device Resource Management</title>
......
......@@ -202,8 +202,8 @@ over a rather long period of time, but improvements are always welcome!
updater uses call_rcu_sched() or synchronize_sched(), then
the corresponding readers must disable preemption, possibly
by calling rcu_read_lock_sched() and rcu_read_unlock_sched().
If the updater uses synchronize_srcu() or call_srcu(),
the the corresponding readers must use srcu_read_lock() and
If the updater uses synchronize_srcu() or call_srcu(), then
the corresponding readers must use srcu_read_lock() and
srcu_read_unlock(), and with the same srcu_struct. The rules for
the expedited primitives are the same as for their non-expedited
counterparts. Mixing things up will result in confusion and
......
......@@ -12,12 +12,12 @@ CONFIG_RCU_CPU_STALL_TIMEOUT
This kernel configuration parameter defines the period of time
that RCU will wait from the beginning of a grace period until it
issues an RCU CPU stall warning. This time period is normally
sixty seconds.
21 seconds.
This configuration parameter may be changed at runtime via the
/sys/module/rcutree/parameters/rcu_cpu_stall_timeout, however
this parameter is checked only at the beginning of a cycle.
So if you are 30 seconds into a 70-second stall, setting this
So if you are 10 seconds into a 40-second stall, setting this
sysfs parameter to (say) five will shorten the timeout for the
-next- stall, or the following warning for the current stall
(assuming the stall lasts long enough). It will not affect the
......@@ -32,7 +32,7 @@ CONFIG_RCU_CPU_STALL_VERBOSE
also dump the stacks of any tasks that are blocking the current
RCU-preempt grace period.
RCU_CPU_STALL_INFO
CONFIG_RCU_CPU_STALL_INFO
This kernel configuration parameter causes the stall warning to
print out additional per-CPU diagnostic information, including
......@@ -43,7 +43,8 @@ RCU_STALL_DELAY_DELTA
Although the lockdep facility is extremely useful, it does add
some overhead. Therefore, under CONFIG_PROVE_RCU, the
RCU_STALL_DELAY_DELTA macro allows five extra seconds before
giving an RCU CPU stall warning message.
giving an RCU CPU stall warning message. (This is a cpp
macro, not a kernel configuration parameter.)
RCU_STALL_RAT_DELAY
......@@ -52,7 +53,8 @@ RCU_STALL_RAT_DELAY
However, if the offending CPU does not detect its own stall in
the number of jiffies specified by RCU_STALL_RAT_DELAY, then
some other CPU will complain. This delay is normally set to
two jiffies.
two jiffies. (This is a cpp macro, not a kernel configuration
parameter.)
When a CPU detects that it is stalling, it will print a message similar
to the following:
......@@ -86,7 +88,12 @@ printing, there will be a spurious stall-warning message:
INFO: rcu_bh_state detected stalls on CPUs/tasks: { } (detected by 4, 2502 jiffies)
This is rare, but does happen from time to time in real life.
This is rare, but does happen from time to time in real life. It is also
possible for a zero-jiffy stall to be flagged in this case, depending
on how the stall warning and the grace-period initialization happen to
interact. Please note that it is not possible to entirely eliminate this
sort of false positive without resorting to things like stop_machine(),
which is overkill for this sort of problem.
If the CONFIG_RCU_CPU_STALL_INFO kernel configuration parameter is set,
more information is printed with the stall-warning message, for example:
......@@ -216,4 +223,5 @@ that portion of the stack which remains the same from trace to trace.
If you can reliably trigger the stall, ftrace can be quite helpful.
RCU bugs can often be debugged with the help of CONFIG_RCU_TRACE
and with RCU's event tracing.
and with RCU's event tracing. For information on RCU's event tracing,
see include/trace/events/rcu.h.
......@@ -2599,7 +2599,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
ramdisk_size= [RAM] Sizes of RAM disks in kilobytes
See Documentation/blockdev/ramdisk.txt.
rcu_nocbs= [KNL,BOOT]
rcu_nocbs= [KNL]
In kernels built with CONFIG_RCU_NOCB_CPU=y, set
the specified list of CPUs to be no-callback CPUs.
Invocation of these CPUs' RCU callbacks will
......@@ -2612,7 +2612,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
real-time workloads. It can also improve energy
efficiency for asymmetric multiprocessors.
rcu_nocb_poll [KNL,BOOT]
rcu_nocb_poll [KNL]
Rather than requiring that offloaded CPUs
(specified by rcu_nocbs= above) explicitly
awaken the corresponding "rcuoN" kthreads,
......@@ -2623,126 +2623,145 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
energy efficiency by requiring that the kthreads
periodically wake up to do the polling.
rcutree.blimit= [KNL,BOOT]
rcutree.blimit= [KNL]
Set maximum number of finished RCU callbacks to process
in one batch.
rcutree.fanout_leaf= [KNL,BOOT]
rcutree.rcu_fanout_leaf= [KNL]
Increase the number of CPUs assigned to each
leaf rcu_node structure. Useful for very large
systems.
rcutree.jiffies_till_first_fqs= [KNL,BOOT]
rcutree.jiffies_till_first_fqs= [KNL]
Set delay from grace-period initialization to
first attempt to force quiescent states.
Units are jiffies, minimum value is zero,
and maximum value is HZ.
rcutree.jiffies_till_next_fqs= [KNL,BOOT]
rcutree.jiffies_till_next_fqs= [KNL]
Set delay between subsequent attempts to force
quiescent states. Units are jiffies, minimum
value is one, and maximum value is HZ.
rcutree.qhimark= [KNL,BOOT]
rcutree.qhimark= [KNL]
Set threshold of queued
RCU callbacks over which batch limiting is disabled.
rcutree.qlowmark= [KNL,BOOT]
rcutree.qlowmark= [KNL]
Set threshold of queued RCU callbacks below which
batch limiting is re-enabled.
rcutree.rcu_cpu_stall_suppress= [KNL,BOOT]
Suppress RCU CPU stall warning messages.
rcutree.rcu_cpu_stall_timeout= [KNL,BOOT]
Set timeout for RCU CPU stall warning messages.
rcutree.rcu_idle_gp_delay= [KNL,BOOT]
rcutree.rcu_idle_gp_delay= [KNL]
Set wakeup interval for idle CPUs that have
RCU callbacks (RCU_FAST_NO_HZ=y).
rcutree.rcu_idle_lazy_gp_delay= [KNL,BOOT]
rcutree.rcu_idle_lazy_gp_delay= [KNL]
Set wakeup interval for idle CPUs that have
only "lazy" RCU callbacks (RCU_FAST_NO_HZ=y).
Lazy RCU callbacks are those which RCU can
prove do nothing more than free memory.
rcutorture.fqs_duration= [KNL,BOOT]
rcutorture.fqs_duration= [KNL]
Set duration of force_quiescent_state bursts.
rcutorture.fqs_holdoff= [KNL,BOOT]
rcutorture.fqs_holdoff= [KNL]
Set holdoff time within force_quiescent_state bursts.
rcutorture.fqs_stutter= [KNL,BOOT]
rcutorture.fqs_stutter= [KNL]
Set wait time between force_quiescent_state bursts.
rcutorture.irqreader= [KNL,BOOT]
Test RCU readers from irq handlers.
rcutorture.gp_exp= [KNL]
Use expedited update-side primitives.
rcutorture.gp_normal= [KNL]
Use normal (non-expedited) update-side primitives.
If both gp_exp and gp_normal are set, do both.
If neither gp_exp nor gp_normal are set, still
do both.
rcutorture.n_barrier_cbs= [KNL,BOOT]
rcutorture.n_barrier_cbs= [KNL]
Set callbacks/threads for rcu_barrier() testing.
rcutorture.nfakewriters= [KNL,BOOT]
rcutorture.nfakewriters= [KNL]
Set number of concurrent RCU writers. These just
stress RCU, they don't participate in the actual
test, hence the "fake".
rcutorture.nreaders= [KNL,BOOT]
rcutorture.nreaders= [KNL]
Set number of RCU readers.
rcutorture.onoff_holdoff= [KNL,BOOT]
rcutorture.object_debug= [KNL]
Enable debug-object double-call_rcu() testing.
rcutorture.onoff_holdoff= [KNL]
Set time (s) after boot for CPU-hotplug testing.
rcutorture.onoff_interval= [KNL,BOOT]
rcutorture.onoff_interval= [KNL]
Set time (s) between CPU-hotplug operations, or
zero to disable CPU-hotplug testing.
rcutorture.shuffle_interval= [KNL,BOOT]
rcutorture.rcutorture_runnable= [BOOT]
Start rcutorture running at boot time.
rcutorture.shuffle_interval= [KNL]
Set task-shuffle interval (s). Shuffling tasks
allows some CPUs to go into dyntick-idle mode
during the rcutorture test.
rcutorture.shutdown_secs= [KNL,BOOT]
rcutorture.shutdown_secs= [KNL]
Set time (s) after boot system shutdown. This
is useful for hands-off automated testing.
rcutorture.stall_cpu= [KNL,BOOT]
rcutorture.stall_cpu= [KNL]
Duration of CPU stall (s) to test RCU CPU stall
warnings, zero to disable.
rcutorture.stall_cpu_holdoff= [KNL,BOOT]
rcutorture.stall_cpu_holdoff= [KNL]
Time to wait (s) after boot before inducing stall.
rcutorture.stat_interval= [KNL,BOOT]
rcutorture.stat_interval= [KNL]
Time (s) between statistics printk()s.
rcutorture.stutter= [KNL,BOOT]
rcutorture.stutter= [KNL]
Time (s) to stutter testing, for example, specifying
five seconds causes the test to run for five seconds,
wait for five seconds, and so on. This tests RCU's
ability to transition abruptly to and from idle.
rcutorture.test_boost= [KNL,BOOT]
rcutorture.test_boost= [KNL]
Test RCU priority boosting? 0=no, 1=maybe, 2=yes.
"Maybe" means test if the RCU implementation
under test support RCU priority boosting.
rcutorture.test_boost_duration= [KNL,BOOT]
rcutorture.test_boost_duration= [KNL]
Duration (s) of each individual boost test.
rcutorture.test_boost_interval= [KNL,BOOT]
rcutorture.test_boost_interval= [KNL]
Interval (s) between each boost test.
rcutorture.test_no_idle_hz= [KNL,BOOT]
rcutorture.test_no_idle_hz= [KNL]
Test RCU's dyntick-idle handling. See also the
rcutorture.shuffle_interval parameter.
rcutorture.torture_type= [KNL,BOOT]
rcutorture.torture_type= [KNL]
Specify the RCU implementation to test.
rcutorture.verbose= [KNL,BOOT]
rcutorture.verbose= [KNL]
Enable additional printk() statements.
rcupdate.rcu_expedited= [KNL]
Use expedited grace-period primitives, for
example, synchronize_rcu_expedited() instead
of synchronize_rcu(). This reduces latency,
but can increase CPU utilization, degrade
real-time latency, and degrade energy efficiency.
rcupdate.rcu_cpu_stall_suppress= [KNL]
Suppress RCU CPU stall warning messages.
rcupdate.rcu_cpu_stall_timeout= [KNL]
Set timeout for RCU CPU stall warning messages.
rdinit= [KNL]
Format: <full_path>
Run specified binary instead of /init from the ramdisk,
......
......@@ -181,12 +181,17 @@ To reduce its OS jitter, do any of the following:
make sure that this is safe on your particular system.
d. It is not possible to entirely get rid of OS jitter
from vmstat_update() on CONFIG_SMP=y systems, but you
can decrease its frequency by writing a large value to
/proc/sys/vm/stat_interval. The default value is HZ,
for an interval of one second. Of course, larger values
will make your virtual-memory statistics update more
slowly. Of course, you can also run your workload at
a real-time priority, thus preempting vmstat_update().
can decrease its frequency by writing a large value
to /proc/sys/vm/stat_interval. The default value is
HZ, for an interval of one second. Of course, larger
values will make your virtual-memory statistics update
more slowly. Of course, you can also run your workload
at a real-time priority, thus preempting vmstat_update(),
but if your workload is CPU-bound, this is a bad idea.
However, there is an RFC patch from Christoph Lameter
(based on an earlier one from Gilad Ben-Yossef) that
reduces or even eliminates vmstat overhead for some
workloads at https://lkml.org/lkml/2013/9/4/379.
e. If running on high-end powerpc servers, build with
CONFIG_PPC_RTAS_DAEMON=n. This prevents the RTAS
daemon from running on each CPU every second or so.
......
......@@ -6935,7 +6935,7 @@ M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git
F: Documentation/RCU/torture.txt
F: kernel/rcutorture.c
F: kernel/rcu/torture.c
RDC R-321X SoC
M: Florian Fainelli <florian@openwrt.org>
......@@ -6962,8 +6962,9 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git
F: Documentation/RCU/
X: Documentation/RCU/torture.txt
F: include/linux/rcu*
F: kernel/rcu*
X: kernel/rcutorture.c
X: include/linux/srcu.h
F: kernel/rcu/
X: kernel/rcu/torture.c
REAL TIME CLOCK (RTC) SUBSYSTEM
M: Alessandro Zummo <a.zummo@towertech.it>
......@@ -7650,8 +7651,8 @@ M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
W: http://www.rdrop.com/users/paulmck/RCU/
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git
F: include/linux/srcu*
F: kernel/srcu*
F: include/linux/srcu.h
F: kernel/rcu/srcu.c
SMACK SECURITY MODULE
M: Casey Schaufler <casey@schaufler-ca.com>
......
......@@ -18,6 +18,21 @@
* be used anywhere you would want to use a list_empty_rcu().
*/
/*
* INIT_LIST_HEAD_RCU - Initialize a list_head visible to RCU readers
* @list: list to be initialized
*
* You should instead use INIT_LIST_HEAD() for normal initialization and
* cleanup tasks, when readers have no access to the list being initialized.
* However, if the list being initialized is visible to readers, you
* need to keep the compiler from being too mischievous.
*/
static inline void INIT_LIST_HEAD_RCU(struct list_head *list)
{
ACCESS_ONCE(list->next) = list;
ACCESS_ONCE(list->prev) = list;
}
/*
* return the ->next pointer of a list_head in an rcu safe
* way, we must not access it directly
......@@ -191,9 +206,13 @@ static inline void list_splice_init_rcu(struct list_head *list,
if (list_empty(list))
return;
/* "first" and "last" tracking list, so initialize it. */
/*
* "first" and "last" tracking list, so initialize it. RCU readers
* have access to this list, so we must use INIT_LIST_HEAD_RCU()
* instead of INIT_LIST_HEAD().
*/
INIT_LIST_HEAD(list);
INIT_LIST_HEAD_RCU(list);
/*
* At this point, the list body still points to the source list.
......
......@@ -261,6 +261,10 @@ static inline void rcu_user_hooks_switch(struct task_struct *prev,
rcu_irq_exit(); \
} while (0)
#if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE) || defined(CONFIG_SMP)
extern bool __rcu_is_watching(void);
#endif /* #if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE) || defined(CONFIG_SMP) */
/*
* Infrastructure to implement the synchronize_() primitives in
* TREE_RCU and rcu_barrier_() primitives in TINY_RCU.
......@@ -297,10 +301,6 @@ static inline void destroy_rcu_head_on_stack(struct rcu_head *head)
}
#endif /* #else !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
#if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_SMP)
extern int rcu_is_cpu_idle(void);
#endif /* #if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_SMP) */
#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU)
bool rcu_lockdep_current_cpu_online(void);
#else /* #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU) */
......@@ -351,7 +351,7 @@ static inline int rcu_read_lock_held(void)
{
if (!debug_lockdep_rcu_enabled())
return 1;
if (rcu_is_cpu_idle())
if (!rcu_is_watching())
return 0;
if (!rcu_lockdep_current_cpu_online())
return 0;
......@@ -402,7 +402,7 @@ static inline int rcu_read_lock_sched_held(void)
if (!debug_lockdep_rcu_enabled())
return 1;
if (rcu_is_cpu_idle())
if (!rcu_is_watching())
return 0;
if (!rcu_lockdep_current_cpu_online())
return 0;
......@@ -771,7 +771,7 @@ static inline void rcu_read_lock(void)
__rcu_read_lock();
__acquire(RCU);
rcu_lock_acquire(&rcu_lock_map);
rcu_lockdep_assert(!rcu_is_cpu_idle(),
rcu_lockdep_assert(rcu_is_watching(),
"rcu_read_lock() used illegally while idle");
}
......@@ -792,7 +792,7 @@ static inline void rcu_read_lock(void)
*/
static inline void rcu_read_unlock(void)
{
rcu_lockdep_assert(!rcu_is_cpu_idle(),
rcu_lockdep_assert(rcu_is_watching(),
"rcu_read_unlock() used illegally while idle");
rcu_lock_release(&rcu_lock_map);
__release(RCU);
......@@ -821,7 +821,7 @@ static inline void rcu_read_lock_bh(void)
local_bh_disable();
__acquire(RCU_BH);
rcu_lock_acquire(&rcu_bh_lock_map);
rcu_lockdep_assert(!rcu_is_cpu_idle(),
rcu_lockdep_assert(rcu_is_watching(),
"rcu_read_lock_bh() used illegally while idle");
}
......@@ -832,7 +832,7 @@ static inline void rcu_read_lock_bh(void)
*/
static inline void rcu_read_unlock_bh(void)
{
rcu_lockdep_assert(!rcu_is_cpu_idle(),
rcu_lockdep_assert(rcu_is_watching(),
"rcu_read_unlock_bh() used illegally while idle");
rcu_lock_release(&rcu_bh_lock_map);
__release(RCU_BH);
......@@ -857,7 +857,7 @@ static inline void rcu_read_lock_sched(void)
preempt_disable();
__acquire(RCU_SCHED);
rcu_lock_acquire(&rcu_sched_lock_map);
rcu_lockdep_assert(!rcu_is_cpu_idle(),
rcu_lockdep_assert(rcu_is_watching(),
"rcu_read_lock_sched() used illegally while idle");
}
......@@ -875,7 +875,7 @@ static inline notrace void rcu_read_lock_sched_notrace(void)
*/
static inline void rcu_read_unlock_sched(void)
{
rcu_lockdep_assert(!rcu_is_cpu_idle(),
rcu_lockdep_assert(rcu_is_watching(),
"rcu_read_unlock_sched() used illegally while idle");
rcu_lock_release(&rcu_sched_lock_map);
__release(RCU_SCHED);
......
......@@ -132,4 +132,21 @@ static inline void rcu_scheduler_starting(void)
}
#endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
#if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE)
static inline bool rcu_is_watching(void)
{
return __rcu_is_watching();
}
#else /* defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE) */
static inline bool rcu_is_watching(void)
{
return true;
}
#endif /* #else defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE) */
#endif /* __LINUX_RCUTINY_H */
......@@ -90,4 +90,6 @@ extern void exit_rcu(void);
extern void rcu_scheduler_starting(void);
extern int rcu_scheduler_active __read_mostly;
extern bool rcu_is_watching(void);
#endif /* __LINUX_RCUTREE_H */
......@@ -39,15 +39,26 @@ TRACE_EVENT(rcu_utilization,
#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
/*
* Tracepoint for grace-period events: starting and ending a grace
* period ("start" and "end", respectively), a CPU noting the start
* of a new grace period or the end of an old grace period ("cpustart"
* and "cpuend", respectively), a CPU passing through a quiescent
* state ("cpuqs"), a CPU coming online or going offline ("cpuonl"
* and "cpuofl", respectively), a CPU being kicked for being too
* long in dyntick-idle mode ("kick"), a CPU accelerating its new
* callbacks to RCU_NEXT_READY_TAIL ("AccReadyCB"), and a CPU
* accelerating its new callbacks to RCU_WAIT_TAIL ("AccWaitCB").
* Tracepoint for grace-period events. Takes a string identifying the
* RCU flavor, the grace-period number, and a string identifying the
* grace-period-related event as follows:
*
* "AccReadyCB": CPU acclerates new callbacks to RCU_NEXT_READY_TAIL.
* "AccWaitCB": CPU accelerates new callbacks to RCU_WAIT_TAIL.
* "newreq": Request a new grace period.
* "start": Start a grace period.
* "cpustart": CPU first notices a grace-period start.
* "cpuqs": CPU passes through a quiescent state.
* "cpuonl": CPU comes online.
* "cpuofl": CPU goes offline.
* "reqwait": GP kthread sleeps waiting for grace-period request.
* "reqwaitsig": GP kthread awakened by signal from reqwait state.
* "fqswait": GP kthread waiting until time to force quiescent states.
* "fqsstart": GP kthread starts forcing quiescent states.
* "fqsend": GP kthread done forcing quiescent states.
* "fqswaitsig": GP kthread awakened by signal from fqswait state.
* "end": End a grace period.
* "cpuend": CPU first notices a grace-period end.
*/
TRACE_EVENT(rcu_grace_period,
......@@ -160,6 +171,46 @@ TRACE_EVENT(rcu_grace_period_init,
__entry->grplo, __entry->grphi, __entry->qsmask)
);
/*
* Tracepoint for RCU no-CBs CPU callback handoffs. This event is intended
* to assist debugging of these handoffs.
*
* The first argument is the name of the RCU flavor, and the second is
* the number of the offloaded CPU are extracted. The third and final
* argument is a string as follows:
*
* "WakeEmpty": Wake rcuo kthread, first CB to empty list.
* "WakeOvf": Wake rcuo kthread, CB list is huge.
* "WakeNot": Don't wake rcuo kthread.
* "WakeNotPoll": Don't wake rcuo kthread because it is polling.
* "Poll": Start of new polling cycle for rcu_nocb_poll.
* "Sleep": Sleep waiting for CBs for !rcu_nocb_poll.
* "WokeEmpty": rcuo kthread woke to find empty list.
* "WokeNonEmpty": rcuo kthread woke to find non-empty list.
* "WaitQueue": Enqueue partially done, timed wait for it to complete.
* "WokeQueue": Partial enqueue now complete.
*/
TRACE_EVENT(rcu_nocb_wake,
TP_PROTO(const char *rcuname, int cpu, const char *reason),
TP_ARGS(rcuname, cpu, reason),
TP_STRUCT__entry(
__field(const char *, rcuname)
__field(int, cpu)
__field(const char *, reason)
),
TP_fast_assign(
__entry->rcuname = rcuname;
__entry->cpu = cpu;
__entry->reason = reason;
),
TP_printk("%s %d %s", __entry->rcuname, __entry->cpu, __entry->reason)
);
/*
* Tracepoint for tasks blocking within preemptible-RCU read-side
* critical sections. Track the type of RCU (which one day might
......@@ -540,17 +591,17 @@ TRACE_EVENT(rcu_invoke_kfree_callback,
TRACE_EVENT(rcu_batch_end,
TP_PROTO(const char *rcuname, int callbacks_invoked,
bool cb, bool nr, bool iit, bool risk),
char cb, char nr, char iit, char risk),
TP_ARGS(rcuname, callbacks_invoked, cb, nr, iit, risk),
TP_STRUCT__entry(
__field(const char *, rcuname)
__field(int, callbacks_invoked)
__field(bool, cb)
__field(bool, nr)
__field(bool, iit)
__field(bool, risk)
__field(char, cb)
__field(char, nr)
__field(char, iit)
__field(char, risk)
),
TP_fast_assign(
......@@ -656,6 +707,7 @@ TRACE_EVENT(rcu_barrier,
#define trace_rcu_future_grace_period(rcuname, gpnum, completed, c, \
level, grplo, grphi, event) \
do { } while (0)
#define trace_rcu_nocb_wake(rcuname, cpu, reason) do { } while (0)
#define trace_rcu_preempt_task(rcuname, pid, gpnum) do { } while (0)
#define trace_rcu_unlock_preempted_task(rcuname, gpnum, pid) do { } while (0)
#define trace_rcu_quiescent_state_report(rcuname, gpnum, mask, qsmask, level, \
......
......@@ -6,9 +6,9 @@ obj-y = fork.o exec_domain.o panic.o \
cpu.o exit.o itimer.o time.o softirq.o resource.o \
sysctl.o sysctl_binary.o capability.o ptrace.o timer.o user.o \
signal.o sys.o kmod.o workqueue.o pid.o task_work.o \
rcupdate.o extable.o params.o posix-timers.o \
extable.o params.o posix-timers.o \
kthread.o wait.o sys_ni.o posix-cpu-timers.o mutex.o \
hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \
hrtimer.o rwsem.o nsproxy.o semaphore.o \
notifier.o ksysfs.o cred.o reboot.o \
async.o range.o groups.o lglock.o smpboot.o
......@@ -27,6 +27,7 @@ obj-y += power/
obj-y += printk/
obj-y += cpu/
obj-y += irq/
obj-y += rcu/
obj-$(CONFIG_CHECKPOINT_RESTORE) += kcmp.o
obj-$(CONFIG_FREEZER) += freezer.o
......@@ -81,12 +82,6 @@ obj-$(CONFIG_KGDB) += debug/
obj-$(CONFIG_DETECT_HUNG_TASK) += hung_task.o
obj-$(CONFIG_LOCKUP_DETECTOR) += watchdog.o
obj-$(CONFIG_SECCOMP) += seccomp.o
obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
obj-$(CONFIG_TREE_RCU) += rcutree.o
obj-$(CONFIG_TREE_PREEMPT_RCU) += rcutree.o
obj-$(CONFIG_TREE_RCU_TRACE) += rcutree_trace.o
obj-$(CONFIG_TINY_RCU) += rcutiny.o
obj-$(CONFIG_TINY_PREEMPT_RCU) += rcutiny.o
obj-$(CONFIG_RELAY) += relay.o
obj-$(CONFIG_SYSCTL) += utsname_sysctl.o
obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o
......
......@@ -4224,7 +4224,7 @@ void lockdep_rcu_suspicious(const char *file, const int line, const char *s)
printk("\n%srcu_scheduler_active = %d, debug_locks = %d\n",
!rcu_lockdep_current_cpu_online()
? "RCU used illegally from offline CPU!\n"
: rcu_is_cpu_idle()
: !rcu_is_watching()
? "RCU used illegally from idle CPU!\n"
: "",
rcu_scheduler_active, debug_locks);
......@@ -4247,7 +4247,7 @@ void lockdep_rcu_suspicious(const char *file, const int line, const char *s)
* So complain bitterly if someone does call rcu_read_lock(),
* rcu_read_lock_bh() and so on from extended quiescent states.
*/
if (rcu_is_cpu_idle())
if (!rcu_is_watching())
printk("RCU used illegally from extended quiescent state!\n");
lockdep_print_held_locks(curr);
......
obj-y += update.o srcu.o
obj-$(CONFIG_RCU_TORTURE_TEST) += torture.o
obj-$(CONFIG_TREE_RCU) += tree.o
obj-$(CONFIG_TREE_PREEMPT_RCU) += tree.o
obj-$(CONFIG_TREE_RCU_TRACE) += tree_trace.o
obj-$(CONFIG_TINY_RCU) += tiny.o
......@@ -122,4 +122,11 @@ int rcu_jiffies_till_stall_check(void);
#endif /* #ifdef CONFIG_RCU_STALL_COMMON */
/*
* Strings used in tracepoints need to be exported via the
* tracing system such that tools like perf and trace-cmd can
* translate the string address pointers to actual text.
*/
#define TPS(x) tracepoint_string(x)
#endif /* __LINUX_RCU_H */
......@@ -35,6 +35,7 @@
#include <linux/time.h>
#include <linux/cpu.h>
#include <linux/prefetch.h>
#include <linux/ftrace_event.h>
#ifdef CONFIG_RCU_TRACE
#include <trace/events/rcu.h>
......@@ -42,7 +43,7 @@
#include "rcu.h"
/* Forward declarations for rcutiny_plugin.h. */
/* Forward declarations for tiny_plugin.h. */
struct rcu_ctrlblk;
static void __rcu_process_callbacks(struct rcu_ctrlblk *rcp);
static void rcu_process_callbacks(struct softirq_action *unused);
......@@ -52,22 +53,23 @@ static void __call_rcu(struct rcu_head *head,
static long long rcu_dynticks_nesting = DYNTICK_TASK_EXIT_IDLE;
#include "rcutiny_plugin.h"
#include "tiny_plugin.h"
/* Common code for rcu_idle_enter() and rcu_irq_exit(), see kernel/rcutree.c. */
static void rcu_idle_enter_common(long long newval)
{
if (newval) {
RCU_TRACE(trace_rcu_dyntick("--=",
RCU_TRACE(trace_rcu_dyntick(TPS("--="),
rcu_dynticks_nesting, newval));
rcu_dynticks_nesting = newval;
return;
}
RCU_TRACE(trace_rcu_dyntick("Start", rcu_dynticks_nesting, newval));
RCU_TRACE(trace_rcu_dyntick(TPS("Start"),
rcu_dynticks_nesting, newval));
if (!is_idle_task(current)) {
struct task_struct *idle = idle_task(smp_processor_id());
struct task_struct *idle __maybe_unused = idle_task(smp_processor_id());
RCU_TRACE(trace_rcu_dyntick("Error on entry: not idle task",
RCU_TRACE(trace_rcu_dyntick(TPS("Entry error: not idle task"),
rcu_dynticks_nesting, newval));
ftrace_dump(DUMP_ALL);
WARN_ONCE(1, "Current pid: %d comm: %s / Idle pid: %d comm: %s",
......@@ -120,15 +122,15 @@ EXPORT_SYMBOL_GPL(rcu_irq_exit);
static void rcu_idle_exit_common(long long oldval)
{
if (oldval) {
RCU_TRACE(trace_rcu_dyntick("++=",
RCU_TRACE(trace_rcu_dyntick(TPS("++="),
oldval, rcu_dynticks_nesting));
return;
}
RCU_TRACE(trace_rcu_dyntick("End", oldval, rcu_dynticks_nesting));
RCU_TRACE(trace_rcu_dyntick(TPS("End"), oldval, rcu_dynticks_nesting));
if (!is_idle_task(current)) {
struct task_struct *idle = idle_task(smp_processor_id());
struct task_struct *idle __maybe_unused = idle_task(smp_processor_id());
RCU_TRACE(trace_rcu_dyntick("Error on exit: not idle task",
RCU_TRACE(trace_rcu_dyntick(TPS("Exit error: not idle task"),
oldval, rcu_dynticks_nesting));
ftrace_dump(DUMP_ALL);
WARN_ONCE(1, "Current pid: %d comm: %s / Idle pid: %d comm: %s",
......@@ -174,18 +176,18 @@ void rcu_irq_enter(void)
}
EXPORT_SYMBOL_GPL(rcu_irq_enter);
#ifdef CONFIG_DEBUG_LOCK_ALLOC
#if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE)
/*
* Test whether RCU thinks that the current CPU is idle.
*/
int rcu_is_cpu_idle(void)
bool __rcu_is_watching(void)
{
return !rcu_dynticks_nesting;
return rcu_dynticks_nesting;
}
EXPORT_SYMBOL(rcu_is_cpu_idle);
EXPORT_SYMBOL(__rcu_is_watching);
#endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
#endif /* defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE) */
/*
* Test whether the current CPU was interrupted from idle. Nested
......@@ -273,7 +275,7 @@ static void __rcu_process_callbacks(struct rcu_ctrlblk *rcp)
if (&rcp->rcucblist == rcp->donetail) {
RCU_TRACE(trace_rcu_batch_start(rcp->name, 0, 0, -1));
RCU_TRACE(trace_rcu_batch_end(rcp->name, 0,
ACCESS_ONCE(rcp->rcucblist),
!!ACCESS_ONCE(rcp->rcucblist),
need_resched(),
is_idle_task(current),
false));
......@@ -304,7 +306,8 @@ static void __rcu_process_callbacks(struct rcu_ctrlblk *rcp)
RCU_TRACE(cb_count++);
}
RCU_TRACE(rcu_trace_sub_qlen(rcp, cb_count));
RCU_TRACE(trace_rcu_batch_end(rcp->name, cb_count, 0, need_resched(),
RCU_TRACE(trace_rcu_batch_end(rcp->name,
cb_count, 0, need_resched(),
is_idle_task(current),
false));
}
......
......@@ -52,6 +52,12 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Paul E. McKenney <paulmck@us.ibm.com> and Josh Triplett <josh@freedesktop.org>");
MODULE_ALIAS("rcutorture");
#ifdef MODULE_PARAM_PREFIX
#undef MODULE_PARAM_PREFIX
#endif
#define MODULE_PARAM_PREFIX "rcutorture."
static int fqs_duration;
module_param(fqs_duration, int, 0444);
MODULE_PARM_DESC(fqs_duration, "Duration of fqs bursts (us), 0 to disable");
......
This diff is collapsed.
......@@ -104,6 +104,8 @@ struct rcu_dynticks {
/* idle-period nonlazy_posted snapshot. */
unsigned long last_accelerate;
/* Last jiffy CBs were accelerated. */
unsigned long last_advance_all;
/* Last jiffy CBs were all advanced. */
int tick_nohz_enabled_snap; /* Previously seen value from sysfs. */
#endif /* #ifdef CONFIG_RCU_FAST_NO_HZ */
};
......
......@@ -28,7 +28,7 @@
#include <linux/gfp.h>
#include <linux/oom.h>
#include <linux/smpboot.h>
#include "time/tick-internal.h"
#include "../time/tick-internal.h"
#define RCU_KTHREAD_PRIO 1
......@@ -96,10 +96,15 @@ static void __init rcu_bootup_announce_oddness(void)
#endif /* #ifdef CONFIG_RCU_NOCB_CPU_ZERO */
#ifdef CONFIG_RCU_NOCB_CPU_ALL
pr_info("\tOffload RCU callbacks from all CPUs\n");
cpumask_setall(rcu_nocb_mask);
cpumask_copy(rcu_nocb_mask, cpu_possible_mask);
#endif /* #ifdef CONFIG_RCU_NOCB_CPU_ALL */
#endif /* #ifndef CONFIG_RCU_NOCB_CPU_NONE */
if (have_rcu_nocb_mask) {
if (!cpumask_subset(rcu_nocb_mask, cpu_possible_mask)) {
pr_info("\tNote: kernel parameter 'rcu_nocbs=' contains nonexistent CPUs.\n");
cpumask_and(rcu_nocb_mask, cpu_possible_mask,
rcu_nocb_mask);
}
cpulist_scnprintf(nocb_buf, sizeof(nocb_buf), rcu_nocb_mask);
pr_info("\tOffload RCU callbacks from CPUs: %s.\n", nocb_buf);
if (rcu_nocb_poll)
......@@ -660,7 +665,7 @@ static void rcu_preempt_check_callbacks(int cpu)
static void rcu_preempt_do_callbacks(void)
{
rcu_do_batch(&rcu_preempt_state, &__get_cpu_var(rcu_preempt_data));
rcu_do_batch(&rcu_preempt_state, this_cpu_ptr(&rcu_preempt_data));
}
#endif /* #ifdef CONFIG_RCU_BOOST */
......@@ -1128,7 +1133,7 @@ void exit_rcu(void)
#ifdef CONFIG_RCU_BOOST
#include "rtmutex_common.h"
#include "../rtmutex_common.h"
#ifdef CONFIG_RCU_TRACE
......@@ -1332,7 +1337,7 @@ static void invoke_rcu_callbacks_kthread(void)
*/
static bool rcu_is_callbacks_kthread(void)
{
return __get_cpu_var(rcu_cpu_kthread_task) == current;
return __this_cpu_read(rcu_cpu_kthread_task) == current;
}
#define RCU_BOOST_DELAY_JIFFIES DIV_ROUND_UP(CONFIG_RCU_BOOST_DELAY * HZ, 1000)
......@@ -1382,8 +1387,8 @@ static int rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
static void rcu_kthread_do_work(void)
{
rcu_do_batch(&rcu_sched_state, &__get_cpu_var(rcu_sched_data));
rcu_do_batch(&rcu_bh_state, &__get_cpu_var(rcu_bh_data));
rcu_do_batch(&rcu_sched_state, this_cpu_ptr(&rcu_sched_data));
rcu_do_batch(&rcu_bh_state, this_cpu_ptr(&rcu_bh_data));
rcu_preempt_do_callbacks();
}
......@@ -1402,7 +1407,7 @@ static void rcu_cpu_kthread_park(unsigned int cpu)
static int rcu_cpu_kthread_should_run(unsigned int cpu)
{
return __get_cpu_var(rcu_cpu_has_work);
return __this_cpu_read(rcu_cpu_has_work);
}
/*
......@@ -1412,8 +1417,8 @@ static int rcu_cpu_kthread_should_run(unsigned int cpu)
*/
static void rcu_cpu_kthread(unsigned int cpu)
{
unsigned int *statusp = &__get_cpu_var(rcu_cpu_kthread_status);
char work, *workp = &__get_cpu_var(rcu_cpu_has_work);
unsigned int *statusp = this_cpu_ptr(&rcu_cpu_kthread_status);
char work, *workp = this_cpu_ptr(&rcu_cpu_has_work);
int spincnt;
for (spincnt = 0; spincnt < 10; spincnt++) {
......@@ -1630,17 +1635,23 @@ module_param(rcu_idle_lazy_gp_delay, int, 0644);
extern int tick_nohz_enabled;
/*
* Try to advance callbacks for all flavors of RCU on the current CPU.
* Afterwards, if there are any callbacks ready for immediate invocation,
* return true.
* Try to advance callbacks for all flavors of RCU on the current CPU, but
* only if it has been awhile since the last time we did so. Afterwards,
* if there are any callbacks ready for immediate invocation, return true.
*/
static bool rcu_try_advance_all_cbs(void)
{
bool cbs_ready = false;
struct rcu_data *rdp;
struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
struct rcu_node *rnp;
struct rcu_state *rsp;
/* Exit early if we advanced recently. */
if (jiffies == rdtp->last_advance_all)
return 0;
rdtp->last_advance_all = jiffies;
for_each_rcu_flavor(rsp) {
rdp = this_cpu_ptr(rsp->rda);
rnp = rdp->mynode;
......@@ -1739,6 +1750,8 @@ static void rcu_prepare_for_idle(int cpu)
*/
if (rdtp->all_lazy &&
rdtp->nonlazy_posted != rdtp->nonlazy_posted_snap) {
rdtp->all_lazy = false;
rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted;
invoke_rcu_core();
return;
}
......@@ -1768,17 +1781,11 @@ static void rcu_prepare_for_idle(int cpu)
*/
static void rcu_cleanup_after_idle(int cpu)
{
struct rcu_data *rdp;
struct rcu_state *rsp;
if (rcu_is_nocb_cpu(cpu))
return;
rcu_try_advance_all_cbs();
for_each_rcu_flavor(rsp) {
rdp = per_cpu_ptr(rsp->rda, cpu);
if (cpu_has_callbacks_ready_to_invoke(rdp))
if (rcu_try_advance_all_cbs())
invoke_rcu_core();
}
}
/*
......@@ -2108,15 +2115,22 @@ static void __call_rcu_nocb_enqueue(struct rcu_data *rdp,
/* If we are not being polled and there is a kthread, awaken it ... */
t = ACCESS_ONCE(rdp->nocb_kthread);
if (rcu_nocb_poll | !t)
if (rcu_nocb_poll || !t) {
trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu,
TPS("WakeNotPoll"));
return;
}
len = atomic_long_read(&rdp->nocb_q_count);
if (old_rhpp == &rdp->nocb_head) {
wake_up(&rdp->nocb_wq); /* ... only if queue was empty ... */
rdp->qlen_last_fqs_check = 0;
trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu, TPS("WakeEmpty"));
} else if (len > rdp->qlen_last_fqs_check + qhimark) {
wake_up_process(t); /* ... or if many callbacks queued. */
rdp->qlen_last_fqs_check = LONG_MAX / 2;
trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu, TPS("WakeOvf"));
} else {
trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu, TPS("WakeNot"));
}
return;
}
......@@ -2140,10 +2154,12 @@ static bool __call_rcu_nocb(struct rcu_data *rdp, struct rcu_head *rhp,
if (__is_kfree_rcu_offset((unsigned long)rhp->func))
trace_rcu_kfree_callback(rdp->rsp->name, rhp,
(unsigned long)rhp->func,
rdp->qlen_lazy, rdp->qlen);
-atomic_long_read(&rdp->nocb_q_count_lazy),
-atomic_long_read(&rdp->nocb_q_count));
else
trace_rcu_callback(rdp->rsp->name, rhp,
rdp->qlen_lazy, rdp->qlen);
-atomic_long_read(&rdp->nocb_q_count_lazy),
-atomic_long_read(&rdp->nocb_q_count));
return 1;
}
......@@ -2221,6 +2237,7 @@ static void rcu_nocb_wait_gp(struct rcu_data *rdp)
static int rcu_nocb_kthread(void *arg)
{
int c, cl;
bool firsttime = 1;
struct rcu_head *list;
struct rcu_head *next;
struct rcu_head **tail;
......@@ -2229,14 +2246,27 @@ static int rcu_nocb_kthread(void *arg)
/* Each pass through this loop invokes one batch of callbacks */
for (;;) {
/* If not polling, wait for next batch of callbacks. */
if (!rcu_nocb_poll)
if (!rcu_nocb_poll) {
trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu,
TPS("Sleep"));
wait_event_interruptible(rdp->nocb_wq, rdp->nocb_head);
} else if (firsttime) {
firsttime = 0;
trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu,
TPS("Poll"));
}
list = ACCESS_ONCE(rdp->nocb_head);
if (!list) {
if (!rcu_nocb_poll)
trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu,
TPS("WokeEmpty"));
schedule_timeout_interruptible(1);
flush_signals(current);
continue;
}
firsttime = 1;
trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu,
TPS("WokeNonEmpty"));
/*
* Extract queued callbacks, update counts, and wait
......@@ -2257,7 +2287,11 @@ static int rcu_nocb_kthread(void *arg)
next = list->next;
/* Wait for enqueuing to complete, if needed. */
while (next == NULL && &list->next != tail) {
trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu,
TPS("WaitQueue"));
schedule_timeout_interruptible(1);
trace_rcu_nocb_wake(rdp->rsp->name, rdp->cpu,
TPS("WokeQueue"));
next = list->next;
}
debug_rcu_head_unqueue(list);
......
......@@ -44,7 +44,7 @@
#include <linux/seq_file.h>
#define RCU_TREE_NONCORE
#include "rcutree.h"
#include "tree.h"
static int r_open(struct inode *inode, struct file *file,
const struct seq_operations *op)
......
......@@ -53,6 +53,12 @@
#include "rcu.h"
MODULE_ALIAS("rcupdate");
#ifdef MODULE_PARAM_PREFIX
#undef MODULE_PARAM_PREFIX
#endif
#define MODULE_PARAM_PREFIX "rcupdate."
module_param(rcu_expedited, int, 0);
#ifdef CONFIG_PREEMPT_RCU
......@@ -148,7 +154,7 @@ int rcu_read_lock_bh_held(void)
{
if (!debug_lockdep_rcu_enabled())
return 1;
if (rcu_is_cpu_idle())
if (!rcu_is_watching())
return 0;
if (!rcu_lockdep_current_cpu_online())
return 0;
......@@ -298,7 +304,7 @@ EXPORT_SYMBOL_GPL(do_trace_rcu_torture_read);
#endif
int rcu_cpu_stall_suppress __read_mostly; /* 1 = suppress stall warnings. */
int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT;
static int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT;
module_param(rcu_cpu_stall_suppress, int, 0644);
module_param(rcu_cpu_stall_timeout, int, 0644);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment