Merge tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips

Pull MIPS updates from James Hogan:
 "Here's the main MIPS pull request for 4.11.

  It contains a few new features such as IRQ stacks, cacheinfo support,
  and KASLR for Octeon CPUs, and a variety of smaller improvements and
  fixes including devicetree additions, kexec cleanups, microMIPS stack
  unwinding fixes, and a bunch of build fixes to clean up continuous
  integration builds.

  Its all been in linux-next for at least a couple of days, most of it
  far longer.

  Miscellaneous:
   - Add IRQ stacks
   - Add cacheinfo support
   - Add "uzImage.bin" zboot target
   - Unify performance counter definitions
   - Export various (mainly assembly) symbols alongside their
     definitions
   - Audit and remove unnecessary uses of module.h

  kexec & kdump:
   - Lots of improvements and fixes
   - Add correct copy_regs implementations
   - Add debug logging of new kernel information

  Security:
   - Use Makefile.postlink to insert relocations into vmlinux
   - Provide plat_post_relocation hook (used for Octeon KASLR)
   - Add support for tuning mmap randomisation
   - Relocate DTB

  microMIPS:
   - A load of unwind fixes
   - Add some missing .insn to fix link errors

  MIPSr6:
   - Fix MULTU/MADDU/MSUBU sign extension in r2 emulation
   - Remove r2_emul_return and use ERETNC unconditionally on MIPSr6
   - Allow pre-r6 emulation on SMP MIPSr6 kernels

  Cache management:
   - Treat physically indexed dcache as non-aliasing
   - Add return errors to protected cache ops for KVM
   - CM3: Ensure L1 & L2 cache ECC checking matches
   - CM3: Indicate inclusive caches
   - I6400: Treat dcache as physically indexed

  Memory management:
   - Ensure bootmem doesn't corrupt reserved memory
   - Export some TLB exception generation functions for KVM

  OF:
   - NULL check initial_boot_params before use in of_scan_flat_dt()
   - Fix unaligned access in of_alias_scan()

  SMP:
   - CPS: Don't BUG if a CPU fails to start

  Other fixes:
   - Fix longstanding 64-bit IP checksum carry bug
   - Fix KERN_CONT fallout in cpu-bugs64.c and sync-r4k.c
   - Update defconfigs for NF_CT_PROTO_DCCP, DPLITE,
     CPU_FREQ_STAT,SCSI_DH changes
   - Disable certain builtin compiler options, stack-check (whole
     kernel), asynchronous-unwind-tables (VDSO).
   - A bunch of build fixes from kernelci.org testing
   - Various other minor cleanups & corrections

  BMIPS:
   - Migrate interrupts during bmips_cpu_disable
   - BCM47xx: Add Luxul devices
   - BCM47xx: Fix Asus WL-500W button inversion
   - BCM7xxx: Add SPI device nodes

  Generic (multiplatform):
   - Add kexec DTB passing
   - Fix big endian
   - Add cpp_its_S in ksym_dep_filter to silence build warning

  IP22:
   - Reformat inline assembler code to modern standards
   - Fix binutils 2.25 build error

  IP27:
   - Fix duplicate CAC_BASE definition build error
   - Disable qlge driver to workaround broken compiler

  Lantiq:
   - Refresh defconfig and activate more drivers
   - Lock DMA register access
   - Fix cascading IRQ setup
   - Fix build of VPE loader
   - xway: Fix ethernet packet header corruption over reboot

  Loongson1
   - Add watchdog support
   - 1B: Reduce DEFAULT_MEMSIZE to 64MB
   - 1B: Change OSC clock name to match rest of kernel
   - 1C: Remove ARCH_WANT_OPTIONAL_GPIOLIB

  Octeon:
   - Add KASLR support
   - Support Octeon III USB controller
   - Fix large copy_from_user corner case
   - Enable devtmpfs in defconfig

  Netlogic:
   - Fix non-default XLR build error due to netlogic,xlp-pic code
   - Fix assembler warning from smpboot.S

  pic32mzda:
   - Fix linker error when early printk is disabled

  Pistachio:
   - Add base device tree
   - Add Ci40 "Marduk" device tree

  Ralink:
   - Support raw appended DTB
   - Add missing I2C & I2S clocks
   - Add missing pinmux and fix pinmux function name typo
   - Add missing clk_round_rate()
   - Clean up prom_init()
   - MT7621: Set SoC type
   - MT7621: Support highmem

  TXx9:
   - Modernize printing of kernel messages and resolve KERN_CONT fallout
   - 7segled: use permission-specific DEVICE_ATTR variants

  XilFPGA:
   - Add IRQ controller and UART IRQ
   - Add AXI I2C and emaclite to DT & defconfig"

* tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (148 commits)
  MIPS: VDSO: Explicitly use -fno-asynchronous-unwind-tables
  MIPS: BCM47XX: Fix button inversion for Asus WL-500W
  MIPS: DTS: Add img directory to Makefile
  MIPS: ip27: Disable qlge driver in defconfig
  MIPS: pic32mzda: Fix linker error for pic32_get_pbclk()
  MIPS: Lantiq: Keep ethernet enabled during boot
  MIPS: OCTEON: Fix copy_from_user fault handling for large buffers
  MIPS: Fix special case in 64 bit IP checksumming.
  MIPS: OCTEON: Enable DEVTMPFS
  MIPS: lantiq: Set physical_memsize
  MIPS: sysmips: Remove duplicated include from syscall.c
  Kbuild: Add cpp_its_S in ksym_dep_filter
  MIPS: Audit and remove any unnecessary uses of module.h
  MIPS: Unify perf counter register definitions
  MIPS: Disable stack checks on MIPS kernels
  MIPS: OCTEON: Platform support for OCTEON III USB controller
  MIPS: Lantiq: Fix cascaded IRQ setup
  MIPS: sync-r4k: Fix KERN_CONT fallout
  MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch
  MIPS: Fix distclean with Makefile.postlink
  ...

Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt

+Imagination Technologies' Pistachio SoC based Marduk Board
+==========================================================
+
+Compatible string must be "img,pistachio-marduk", "img,pistachio"
+
+Hardware and other related documentation is available at
+https://docs.creatordev.io/ci40/
+
+It is also known as Creator Ci40. Marduk is legacy name and will
+be there for decades.

MAINTAINERS

@@ -7707,6 +7707,12 @@ W:	http://www.kernel.org/doc/man-pages
 L:	linux-man@vger.kernel.org
 S:	Maintained
 
+MARDUK (CREATOR CI40) DEVICE TREE SUPPORT
+M:	Rahul Bedarkar <rahul.bedarkar@imgtec.com>
+L:	linux-mips@linux-mips.org
+S:	Maintained
+F:	arch/mips/boot/dts/img/pistachio_marduk.dts
+
 MARVELL 88E6XXX ETHERNET SWITCH FABRIC DRIVER
 M:	Andrew Lunn <andrew@lunn.ch>
 M:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
@@ -9795,7 +9801,7 @@ L:      linux-mips@linux-mips.org
 S:      Maintained
 F:      arch/mips/pistachio/
 F:      arch/mips/include/asm/mach-pistachio/
-F:      arch/mips/boot/dts/pistachio/
+F:      arch/mips/boot/dts/img/pistachio*
 F:      arch/mips/configs/pistachio*_defconfig
 
 PKTCDVD DRIVER

arch/mips/Kconfig

@@ -9,10 +9,13 @@ config MIPS
 	select HAVE_CONTEXT_TRACKING
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_IDE
+	select HAVE_IRQ_EXIT_ON_IRQ_STACK
 	select HAVE_OPROFILE
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
 	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_MMAP_RND_BITS if MMU
+	select HAVE_ARCH_MMAP_RND_COMPAT_BITS if MMU && COMPAT
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_CBPF_JIT if !CPU_MICROMIPS
@@ -94,6 +97,7 @@ config MIPS_GENERIC
 	select PCI_DRIVERS_GENERIC
 	select PINCTRL
 	select SMP_UP if SMP
+	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_HAS_CPU_MIPS32_R6
@@ -478,6 +482,7 @@ config MACH_XILFPGA
 	select SYS_SUPPORTS_ZBOOT_UART16550
 	select USE_OF
 	select USE_GENERIC_EARLY_PRINTK_8250
+	select XILINX_INTC
 	help
 	  This enables support for the IMG University Program MIPSfpga platform.
 
@@ -909,6 +914,7 @@ config CAVIUM_OCTEON_SOC
 	select NR_CPUS_DEFAULT_16
 	select BUILTIN_DTB
 	select MTD_COMPLEX_MAPPINGS
+	select SYS_SUPPORTS_RELOCATABLE
 	help
 	  This option supports all of the Octeon reference boards from Cavium
 	  Networks. It builds a kernel that dynamically determines the Octeon
@@ -1427,7 +1433,6 @@ config CPU_LOONGSON1C
 	bool "Loongson 1C"
 	depends on SYS_HAS_CPU_LOONGSON1C
 	select CPU_LOONGSON1
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select LEDS_GPIO_REGISTER
 	help
 	  The Loongson 1C is a 32-bit SoC, which implements the MIPS32
@@ -2288,7 +2293,7 @@ config MIPS_MT_FPAFF
 
 config MIPSR2_TO_R6_EMULATOR
 	bool "MIPS R2-to-R6 emulator"
-	depends on CPU_MIPSR6 && !SMP
+	depends on CPU_MIPSR6
 	default y
 	help
 	  Choose this option if you want to run non-R6 MIPS userland code.
@@ -2296,8 +2301,6 @@ config MIPSR2_TO_R6_EMULATOR
 	  default. You can enable it using the 'mipsr2emu' kernel option.
 	  The only reason this is a build-time option is to save ~14K from the
 	  final kernel image.
-comment "MIPS R2-to-R6 emulator is only available for UP kernels"
-	depends on SMP && CPU_MIPSR6
 
 config MIPS_VPE_LOADER
 	bool "VPE loader support."
@@ -2572,7 +2575,7 @@ config SYS_SUPPORTS_NUMA
 
 config RELOCATABLE
 	bool "Relocatable kernel"
-	depends on SYS_SUPPORTS_RELOCATABLE && (CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_MIPS32_R6 || CPU_MIPS64_R6)
+	depends on SYS_SUPPORTS_RELOCATABLE && (CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_MIPS32_R6 || CPU_MIPS64_R6 || CAVIUM_OCTEON_SOC)
 	help
 	  This builds a kernel image that retains relocation information
 	  so it can be loaded someplace besides the default 1MB.
@@ -3075,6 +3078,20 @@ config MMU
 	bool
 	default y
 
+config ARCH_MMAP_RND_BITS_MIN
+	default 12 if 64BIT
+	default 8
+
+config ARCH_MMAP_RND_BITS_MAX
+	default 18 if 64BIT
+	default 15
+
+config ARCH_MMAP_RND_COMPAT_BITS_MIN
+       default 8
+
+config ARCH_MMAP_RND_COMPAT_BITS_MAX
+       default 15
+
 config I8253
 	bool
 	select CLKSRC_I8253

arch/mips/Makefile

@@ -131,6 +131,21 @@ cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= $(shell $(CC) -dumpmachine |grep -q 'mips.
 
 cflags-$(CONFIG_SB1XXX_CORELIS)	+= $(call cc-option,-mno-sched-prolog) \
 				   -fno-omit-frame-pointer
+
+# Some distribution-specific toolchains might pass the -fstack-check
+# option during the build, which adds a simple stack-probe at the beginning
+# of every function.  This stack probe is to ensure that there is enough
+# stack space, else a SEGV is generated.  This is not desirable for MIPS
+# as kernel stacks are small, placed in unmapped virtual memory, and do not
+# grow when overflowed.  Especially on SGI IP27 platforms, this check will
+# lead to a NULL pointer dereference in _raw_spin_lock_irq.
+#
+# In disassembly, this stack probe appears at the top of a function as:
+#    sd		zero,<offset>(sp)
+# Where <offset> is a negative value.
+#
+cflags-y += -fno-stack-check
+
 #
 # CPU-dependent compiler/assembler options for optimization.
 #
@@ -320,6 +335,9 @@ bootz-y			:= vmlinuz
 bootz-y			+= vmlinuz.bin
 bootz-y			+= vmlinuz.ecoff
 bootz-y			+= vmlinuz.srec
+ifeq ($(shell expr $(zload-y) \< 0xffffffff80000000 2> /dev/null), 0)
+bootz-y			+= uzImage.bin
+endif
 
 ifdef CONFIG_LASAT
 rom.bin rom.sw: vmlinux
@@ -327,10 +345,6 @@ rom.bin rom.sw: vmlinux
 		$(bootvars-y) $@
 endif
 
-CMD_RELOCS = arch/mips/boot/tools/relocs
-quiet_cmd_relocs = RELOCS  $<
-      cmd_relocs = $(CMD_RELOCS) $<
-
 #
 # Some machines like the Indy need 32-bit ELF binaries for booting purposes.
 # Other need ECOFF, so we build a 32-bit ELF binary for them which we then
@@ -339,11 +353,6 @@ quiet_cmd_relocs = RELOCS  $<
 quiet_cmd_32 = OBJCOPY $@
 	cmd_32 = $(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
 vmlinux.32: vmlinux
-ifeq ($(CONFIG_RELOCATABLE)$(CONFIG_64BIT),yy)
-# Currently, objcopy fails to handle the relocations in the elf64
-# So the relocs tool must be run here to remove them first
-	$(call cmd,relocs)
-endif
 	$(call cmd,32)
 
 #
@@ -359,9 +368,6 @@ all:	$(all-y)
 
 # boot
 $(boot-y): $(vmlinux-32) FORCE
-ifeq ($(CONFIG_RELOCATABLE)$(CONFIG_32BIT),yy)
-	$(call cmd,relocs)
-endif
 	$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) \
 		$(bootvars-y) arch/mips/boot/$@
 
@@ -395,11 +401,11 @@ dtbs_install:
 
 archprepare:
 ifdef CONFIG_MIPS32_N32
-	@echo '  Checking missing-syscalls for N32'
+	@$(kecho) '  Checking missing-syscalls for N32'
 	$(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=n32"
 endif
 ifdef CONFIG_MIPS32_O32
-	@echo '  Checking missing-syscalls for O32'
+	@$(kecho) '  Checking missing-syscalls for O32'
 	$(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=32"
 endif
 
@@ -433,6 +439,7 @@ define archhelp
 	echo '  uImage.gz            - U-Boot image (gzip)'
 	echo '  uImage.lzma          - U-Boot image (lzma)'
 	echo '  uImage.lzo           - U-Boot image (lzo)'
+	echo '  uzImage.bin          - U-Boot image (self-extracting)'
 	echo '  dtbs                 - Device-tree blobs for enabled boards'
 	echo '  dtbs_install         - Install dtbs to $(INSTALL_DTBS_PATH)'
 	echo

arch/mips/Makefile.postlink

+# ===========================================================================
+# Post-link MIPS pass
+# ===========================================================================
+#
+# 1. Insert relocations into vmlinux
+
+PHONY := __archpost
+__archpost:
+
+-include include/config/auto.conf
+include scripts/Kbuild.include
+
+CMD_RELOCS = arch/mips/boot/tools/relocs
+quiet_cmd_relocs = RELOCS $@
+      cmd_relocs = $(CMD_RELOCS) $@
+
+# `@true` prevents complaint when there is nothing to be done
+
+vmlinux: FORCE
+	@true
+ifeq ($(CONFIG_RELOCATABLE),y)
+	$(call if_changed,relocs)
+endif
+
+%.ko: FORCE
+	@true
+
+clean:
+	@true
+
+PHONY += FORCE clean
+
+FORCE:
+
+.PHONY: $(PHONY)

arch/mips/alchemy/board-gpr.c

@@ -236,7 +236,6 @@ static struct platform_device gpr_i2c_device = {
 static struct i2c_board_info gpr_i2c_info[] __initdata = {
 	{
 		I2C_BOARD_INFO("lm83", 0x18),
-		.type = "lm83"
 	}
 };
 

arch/mips/alchemy/common/dbdma.c

@@ -35,7 +35,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/syscore_ops.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>

arch/mips/alchemy/common/dma.c

@@ -31,7 +31,7 @@
  */
 
 #include <linux/init.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/spinlock.h>

arch/mips/alchemy/common/gpiolib.c

@@ -32,7 +32,6 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/gpio.h>
 #include <asm/mach-au1x00/gpio-au1000.h>

arch/mips/alchemy/common/prom.c

@@ -33,7 +33,6 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/string.h>
 

arch/mips/alchemy/common/usb.c

@@ -10,9 +10,9 @@
  */
 
 #include <linux/clk.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/syscore_ops.h>
 #include <asm/cpu.h>

arch/mips/alchemy/common/vss.c

@@ -6,7 +6,7 @@
  * for various media blocks are enabled/disabled.
  */
 
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/spinlock.h>
 #include <asm/mach-au1x00/au1000.h>
 

arch/mips/alchemy/devboards/bcsr.c

@@ -9,7 +9,8 @@
 
 #include <linux/interrupt.h>
 #include <linux/irqchip/chained_irq.h>
-#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/export.h>
 #include <linux/spinlock.h>
 #include <linux/irq.h>
 #include <asm/addrspace.h>

arch/mips/ar7/clock.c

@@ -21,7 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/types.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/delay.h>
 #include <linux/gcd.h>
 #include <linux/io.h>

arch/mips/ar7/gpio.c

@@ -18,7 +18,8 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/export.h>
 #include <linux/gpio.h>
 
 #include <asm/mach-ar7/ar7.h>

arch/mips/ar7/memory.c

@@ -19,7 +19,6 @@
 #include <linux/bootmem.h>
 #include <linux/init.h>
 #include <linux/mm.h>
-#include <linux/module.h>
 #include <linux/pfn.h>
 #include <linux/proc_fs.h>
 #include <linux/string.h>

arch/mips/ar7/platform.c

@@ -19,7 +19,6 @@
 
 #include <linux/init.h>
 #include <linux/types.h>
-#include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>

arch/mips/ar7/prom.c

@@ -21,7 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/serial_reg.h>
 #include <linux/spinlock.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/string.h>
 #include <linux/io.h>
 #include <asm/bootinfo.h>

arch/mips/ath79/clock.c

@@ -12,7 +12,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/clk.h>
@@ -45,7 +44,7 @@ static struct clk *__init ath79_add_sys_clkdev(
 	int err;
 
 	clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate);
-	if (!clk)
+	if (IS_ERR(clk))
 		panic("failed to allocate %s clock structure", id);
 
 	err = clk_register_clkdev(clk, id, NULL);
@@ -508,16 +507,19 @@ static void __init ath79_clocks_init_dt_ng(struct device_node *np)
 		ar9330_clk_init(ref_clk, pll_base);
 	else {
 		pr_err("%s: could not find any appropriate clk_init()\n", dnfn);
-		goto err_clk;
+		goto err_iounmap;
 	}
 
 	if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
 		pr_err("%s: could not register clk provider\n", dnfn);
-		goto err_clk;
+		goto err_iounmap;
 	}
 
 	return;
 
+err_iounmap:
+	iounmap(pll_base);
+
 err_clk:
 	clk_put(ref_clk);
 

arch/mips/ath79/common.c

@@ -13,7 +13,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/spinlock.h>
 

arch/mips/bcm47xx/board.c

@@ -149,6 +149,15 @@ struct bcm47xx_board_type_list2 bcm47xx_board_list_boot_hw[] __initconst = {
 /* board_id */
 static const
 struct bcm47xx_board_type_list1 bcm47xx_board_list_board_id[] __initconst = {
+	{{BCM47XX_BOARD_LUXUL_ABR_4400_V1, "Luxul ABR-4400 V1"}, "luxul_abr4400_v1"},
+	{{BCM47XX_BOARD_LUXUL_XAP_310_V1, "Luxul XAP-310 V1"}, "luxul_xap310_v1"},
+	{{BCM47XX_BOARD_LUXUL_XAP_1210_V1, "Luxul XAP-1210 V1"}, "luxul_xap1210_v1"},
+	{{BCM47XX_BOARD_LUXUL_XAP_1230_V1, "Luxul XAP-1230 V1"}, "luxul_xap1230_v1"},
+	{{BCM47XX_BOARD_LUXUL_XAP_1240_V1, "Luxul XAP-1240 V1"}, "luxul_xap1240_v1"},
+	{{BCM47XX_BOARD_LUXUL_XAP_1500_V1, "Luxul XAP-1500 V1"}, "luxul_xap1500_v1"},
+	{{BCM47XX_BOARD_LUXUL_XBR_4400_V1, "Luxul XBR-4400 V1"}, "luxul_xbr4400_v1"},
+	{{BCM47XX_BOARD_LUXUL_XVW_P30_V1, "Luxul XVW-P30 V1"}, "luxul_xvwp30_v1"},
+	{{BCM47XX_BOARD_LUXUL_XWR_600_V1, "Luxul XWR-600 V1"}, "luxul_xwr600_v1"},
 	{{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"},
 	{{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
 	{{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},

arch/mips/bcm47xx/buttons.c

@@ -17,6 +17,12 @@
 		.active_low	= 1,					\
 	}
 
+#define BCM47XX_GPIO_KEY_H(_gpio, _code)				\
+	{								\
+		.code		= _code,				\
+		.gpio		= _gpio,				\
+	}
+
 /* Asus */
 
 static const struct gpio_keys_button
@@ -79,8 +85,8 @@ bcm47xx_buttons_asus_wl500gpv2[] __initconst = {
 
 static const struct gpio_keys_button
 bcm47xx_buttons_asus_wl500w[] __initconst = {
-	BCM47XX_GPIO_KEY(6, KEY_RESTART),
-	BCM47XX_GPIO_KEY(7, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY_H(6, KEY_RESTART),
+	BCM47XX_GPIO_KEY_H(7, KEY_WPS_BUTTON),
 };
 
 static const struct gpio_keys_button
@@ -301,6 +307,51 @@ bcm47xx_buttons_linksys_wrtsl54gs[] __initconst = {
 
 /* Luxul */
 
+static const struct gpio_keys_button
+bcm47xx_buttons_luxul_abr_4400_v1[] = {
+	BCM47XX_GPIO_KEY(14, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_luxul_xap_310_v1[] = {
+	BCM47XX_GPIO_KEY(20, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_luxul_xap_1210_v1[] = {
+	BCM47XX_GPIO_KEY(8, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_luxul_xap_1230_v1[] = {
+	BCM47XX_GPIO_KEY(8, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_luxul_xap_1240_v1[] = {
+	BCM47XX_GPIO_KEY(8, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_luxul_xap_1500_v1[] = {
+	BCM47XX_GPIO_KEY(14, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_luxul_xbr_4400_v1[] = {
+	BCM47XX_GPIO_KEY(14, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_luxul_xvw_p30_v1[] = {
+	BCM47XX_GPIO_KEY(20, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_luxul_xwr_600_v1[] = {
+	BCM47XX_GPIO_KEY(8, KEY_RESTART),
+};
+
 static const struct gpio_keys_button
 bcm47xx_buttons_luxul_xwr_1750_v1[] = {
 	BCM47XX_GPIO_KEY(14, BTN_TASK),
@@ -561,6 +612,33 @@ int __init bcm47xx_buttons_register(void)
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrtsl54gs);
 		break;
 
+	case BCM47XX_BOARD_LUXUL_ABR_4400_V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_abr_4400_v1);
+		break;
+	case BCM47XX_BOARD_LUXUL_XAP_310_V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xap_310_v1);
+		break;
+	case BCM47XX_BOARD_LUXUL_XAP_1210_V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xap_1210_v1);
+		break;
+	case BCM47XX_BOARD_LUXUL_XAP_1230_V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xap_1230_v1);
+		break;
+	case BCM47XX_BOARD_LUXUL_XAP_1240_V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xap_1240_v1);
+		break;
+	case BCM47XX_BOARD_LUXUL_XAP_1500_V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xap_1500_v1);
+		break;
+	case BCM47XX_BOARD_LUXUL_XBR_4400_V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xbr_4400_v1);
+		break;
+	case BCM47XX_BOARD_LUXUL_XVW_P30_V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xvw_p30_v1);
+		break;
+	case BCM47XX_BOARD_LUXUL_XWR_600_V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xwr_600_v1);
+		break;
 	case BCM47XX_BOARD_LUXUL_XWR_1750_V1:
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_luxul_xwr_1750_v1);
 		break;

arch/mips/bcm47xx/leds.c

@@ -372,6 +372,60 @@ bcm47xx_leds_linksys_wrtsl54gs[] __initconst = {
 
 /* Luxul */
 
+static const struct gpio_led
+bcm47xx_leds_luxul_abr_4400_v1[] __initconst = {
+	BCM47XX_GPIO_LED(12, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED_TRIGGER(15, "green", "status", 0, "timer"),
+};
+
+static const struct gpio_led
+bcm47xx_leds_luxul_xap_310_v1[] __initconst = {
+	BCM47XX_GPIO_LED_TRIGGER(6, "green", "status", 1, "timer"),
+};
+
+static const struct gpio_led
+bcm47xx_leds_luxul_xap_1210_v1[] __initconst = {
+	BCM47XX_GPIO_LED_TRIGGER(6, "green", "status", 1, "timer"),
+};
+
+static const struct gpio_led
+bcm47xx_leds_luxul_xap_1230_v1[] __initconst = {
+	BCM47XX_GPIO_LED(3, "blue", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(4, "green", "bridge", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED_TRIGGER(6, "green", "status", 1, "timer"),
+};
+
+static const struct gpio_led
+bcm47xx_leds_luxul_xap_1240_v1[] __initconst = {
+	BCM47XX_GPIO_LED(3, "blue", "2ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(4, "green", "bridge", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED_TRIGGER(6, "green", "status", 1, "timer"),
+};
+
+static const struct gpio_led
+bcm47xx_leds_luxul_xap_1500_v1[] __initconst = {
+	BCM47XX_GPIO_LED_TRIGGER(13, "green", "status", 1, "timer"),
+};
+
+static const struct gpio_led
+bcm47xx_leds_luxul_xbr_4400_v1[] __initconst = {
+	BCM47XX_GPIO_LED(12, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED_TRIGGER(15, "green", "status", 0, "timer"),
+};
+
+static const struct gpio_led
+bcm47xx_leds_luxul_xvw_p30_v1[] __initconst = {
+	BCM47XX_GPIO_LED_TRIGGER(0, "blue", "status", 1, "timer"),
+	BCM47XX_GPIO_LED(1, "green", "link", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_luxul_xwr_600_v1[] __initconst = {
+	BCM47XX_GPIO_LED(3, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED_TRIGGER(6, "green", "status", 1, "timer"),
+	BCM47XX_GPIO_LED(9, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
 static const struct gpio_led
 bcm47xx_leds_luxul_xwr_1750_v1[] __initconst = {
 	BCM47XX_GPIO_LED(5, "green", "5ghz", 0, LEDS_GPIO_DEFSTATE_OFF),
@@ -633,6 +687,33 @@ void __init bcm47xx_leds_register(void)
 		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrtsl54gs);
 		break;
 
+	case BCM47XX_BOARD_LUXUL_ABR_4400_V1:
+		bcm47xx_set_pdata(bcm47xx_leds_luxul_abr_4400_v1);
+		break;
+	case BCM47XX_BOARD_LUXUL_XAP_310_V1:
+		bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_310_v1);
+		break;
+	case BCM47XX_BOARD_LUXUL_XAP_1210_V1:
+		bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1210_v1);
+		break;
+	case BCM47XX_BOARD_LUXUL_XAP_1230_V1:
+		bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1230_v1);
+		break;
+	case BCM47XX_BOARD_LUXUL_XAP_1240_V1:
+		bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1240_v1);
+		break;
+	case BCM47XX_BOARD_LUXUL_XAP_1500_V1:
+		bcm47xx_set_pdata(bcm47xx_leds_luxul_xap_1500_v1);
+		break;
+	case BCM47XX_BOARD_LUXUL_XBR_4400_V1:
+		bcm47xx_set_pdata(bcm47xx_leds_luxul_xbr_4400_v1);
+		break;
+	case BCM47XX_BOARD_LUXUL_XVW_P30_V1:
+		bcm47xx_set_pdata(bcm47xx_leds_luxul_xvw_p30_v1);
+		break;
+	case BCM47XX_BOARD_LUXUL_XWR_600_V1:
+		bcm47xx_set_pdata(bcm47xx_leds_luxul_xwr_600_v1);
+		break;
 	case BCM47XX_BOARD_LUXUL_XWR_1750_V1:
 		bcm47xx_set_pdata(bcm47xx_leds_luxul_xwr_1750_v1);
 		break;

arch/mips/bcm63xx/clk.c

@@ -6,7 +6,8 @@
  * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
  */
 
-#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/export.h>
 #include <linux/mutex.h>
 #include <linux/err.h>
 #include <linux/clk.h>

arch/mips/bcm63xx/cpu.c

@@ -8,7 +8,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/cpu.h>
 #include <asm/cpu.h>
 #include <asm/cpu-info.h>

arch/mips/bcm63xx/cs.c

@@ -7,7 +7,8 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/export.h>
 #include <linux/spinlock.h>
 #include <linux/log2.h>
 #include <bcm63xx_cpu.h>

arch/mips/bcm63xx/gpio.c

@@ -8,7 +8,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
 #include <linux/gpio/driver.h>

arch/mips/bcm63xx/irq.c

@@ -10,7 +10,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/spinlock.h>
 #include <asm/irq_cpu.h>

arch/mips/bcm63xx/reset.c

@@ -6,7 +6,8 @@
  * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
  */
 
-#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/export.h>
 #include <linux/mutex.h>
 #include <linux/err.h>
 #include <linux/clk.h>

arch/mips/bcm63xx/timer.c

@@ -8,7 +8,8 @@
 
 #include <linux/kernel.h>
 #include <linux/err.h>
-#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/export.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/clk.h>

arch/mips/boot/compressed/Makefile

@@ -18,14 +18,14 @@ include $(srctree)/arch/mips/Kbuild.platforms
 BOOT_HEAP_SIZE := 0x400000
 
 # Disable Function Tracer
-KBUILD_CFLAGS := $(shell echo $(KBUILD_CFLAGS) | sed -e "s/-pg//")
+KBUILD_CFLAGS := $(filter-out -pg, $(KBUILD_CFLAGS))
 
 KBUILD_CFLAGS := $(filter-out -fstack-protector, $(KBUILD_CFLAGS))
 
-KBUILD_CFLAGS := $(LINUXINCLUDE) $(KBUILD_CFLAGS) -D__KERNEL__ \
+KBUILD_CFLAGS := $(KBUILD_CFLAGS) -D__KERNEL__ \
 	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull"
 
-KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
+KBUILD_AFLAGS := $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
 	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
 	-DKERNEL_ENTRY=$(VMLINUX_ENTRY_ADDRESS)
 
@@ -84,6 +84,7 @@ else
 VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \
 		$(obj)/vmlinux.bin $(VMLINUX_LOAD_ADDRESS))
 endif
+UIMAGE_LOADADDR = $(VMLINUZ_LOAD_ADDRESS)
 
 vmlinuzobjs-y += $(obj)/piggy.o
 
@@ -129,4 +130,7 @@ OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec
 vmlinuz.srec: vmlinuz
 	$(call cmd,objcopy)
 
+uzImage.bin: vmlinuz.bin FORCE
+	$(call if_changed,uimage,none)
+
 clean-files := $(objtree)/vmlinuz $(objtree)/vmlinuz.{32,ecoff,bin,srec}

arch/mips/boot/dts/Makefile

 dts-dirs	+= brcm
 dts-dirs	+= cavium-octeon
+dts-dirs	+= img
 dts-dirs	+= ingenic
 dts-dirs	+= lantiq
 dts-dirs	+= mti

arch/mips/boot/dts/brcm/bcm7125.dtsi

@@ -91,15 +91,15 @@ upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
-			brcm,int-map-mask = <0x44>, <0xf000000>;
+			brcm,int-map-mask = <0x44>, <0xf000000>, <0x100000>;
 			brcm,int-fwd-mask = <0x70000>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <18>, <19>;
-			interrupt-names = "upg_main", "upg_bsc";
+			interrupts = <18>, <19>, <20>;
+			interrupt-names = "upg_main", "upg_bsc", "upg_spi";
 		};
 
 		sun_top_ctrl: syscon@404000 {
@@ -226,5 +226,48 @@ ohci0: usb@488400 {
 			interrupts = <61>;
 			status = "disabled";
 		};
+
+		spi_l2_intc: interrupt-controller@411d00 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411d00 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <79>;
+		};
+
+		qspi: spi@443000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-qspi";
+			clocks = <&upg_clk>;
+			reg = <0x440920 0x4 0x443200 0x188 0x443000 0x50>;
+			reg-names = "cs_reg", "hif_mspi", "bspi";
+			interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+			interrupt-parent = <&spi_l2_intc>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overread",
+					  "mspi_done",
+					  "mspi_halted";
+			status = "disabled";
+		};
+
+		mspi: spi@406400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-mspi";
+			clocks = <&upg_clk>;
+			reg = <0x406400 0x180>;
+			reg-names = "mspi";
+			interrupts = <0x14>;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupt-names = "mspi_done";
+			status = "disabled";
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm7346.dtsi

@@ -439,5 +439,48 @@ sdhci0: sdhci@413500 {
 			interrupts = <85>;
 			status = "disabled";
 		};
+
+		spi_l2_intc: interrupt-controller@411d00 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411d00 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <31>;
+		};
+
+		qspi: spi@413000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-qspi";
+			clocks = <&upg_clk>;
+			reg = <0x410920 0x4 0x413200 0x188 0x413000 0x50>;
+			reg-names = "cs_reg", "hif_mspi", "bspi";
+			interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+			interrupt-parent = <&spi_l2_intc>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overread",
+					  "mspi_done",
+					  "mspi_halted";
+			status = "disabled";
+		};
+
+		mspi: spi@408a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-mspi";
+			clocks = <&upg_clk>;
+			reg = <0x408a00 0x180>;
+			reg-names = "mspi";
+			interrupts = <0x14>;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupt-names = "mspi_done";
+			status = "disabled";
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm7358.dtsi

@@ -318,5 +318,48 @@ nand: nand@412800 {
 			interrupts = <24>;
 			status = "disabled";
 		};
+
+		spi_l2_intc: interrupt-controller@411d00 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411d00 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <31>;
+		};
+
+		qspi: spi@413000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-qspi";
+			clocks = <&upg_clk>;
+			reg = <0x410920 0x4 0x413200 0x188 0x413000 0x50>;
+			reg-names = "cs_reg", "hif_mspi", "bspi";
+			interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+			interrupt-parent = <&spi_l2_intc>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overread",
+					  "mspi_done",
+					  "mspi_halted";
+			status = "disabled";
+		};
+
+		mspi: spi@408a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-mspi";
+			clocks = <&upg_clk>;
+			reg = <0x408a00 0x180>;
+			reg-names = "mspi";
+			interrupts = <0x14>;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupt-names = "mspi_done";
+			status = "disabled";
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm7360.dtsi

@@ -358,5 +358,48 @@ sdhci0: sdhci@410000 {
 			interrupts = <82>;
 			status = "disabled";
 		};
+
+		spi_l2_intc: interrupt-controller@411d00 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411d00 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <31>;
+		};
+
+		qspi: spi@413000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-qspi";
+			clocks = <&upg_clk>;
+			reg = <0x410920 0x4 0x413200 0x188 0x413000 0x50>;
+			reg-names = "cs_reg", "hif_mspi", "bspi";
+			interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+			interrupt-parent = <&spi_l2_intc>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overread",
+					  "mspi_done",
+					  "mspi_halted";
+			status = "disabled";
+		};
+
+		mspi: spi@408a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-mspi";
+			clocks = <&upg_clk>;
+			reg = <0x408a00 0x180>;
+			reg-names = "mspi";
+			interrupts = <0x14>;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupt-names = "mspi_done";
+			status = "disabled";
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm7362.dtsi

@@ -354,5 +354,48 @@ sdhci0: sdhci@410000 {
 			interrupts = <82>;
 			status = "disabled";
 		};
+
+		spi_l2_intc: interrupt-controller@411d00 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411d00 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <31>;
+		};
+
+		qspi: spi@413000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-qspi";
+			clocks = <&upg_clk>;
+			reg = <0x410920 0x4 0x413200 0x188 0x413000 0x50>;
+			reg-names = "cs_reg", "hif_mspi", "bspi";
+			interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+			interrupt-parent = <&spi_l2_intc>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overread",
+					  "mspi_done",
+					  "mspi_halted";
+			status = "disabled";
+		};
+
+		mspi: spi@408a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-mspi";
+			clocks = <&upg_clk>;
+			reg = <0x408a00 0x180>;
+			reg-names = "mspi";
+			interrupts = <0x14>;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupt-names = "mspi_done";
+			status = "disabled";
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm7420.dtsi

@@ -92,15 +92,15 @@ upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
-			brcm,int-map-mask = <0x44>, <0x1f000000>;
+			brcm,int-map-mask = <0x44>, <0x1f000000>, <0x100000>;
 			brcm,int-fwd-mask = <0x70000>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <18>, <19>;
-			interrupt-names = "upg_main", "upg_bsc";
+			interrupts = <18>, <19>, <20>;
+			interrupt-names = "upg_main", "upg_bsc", "upg_spi";
 		};
 
 		sun_top_ctrl: syscon@404000 {
@@ -287,5 +287,48 @@ ohci1: usb@488600 {
 			interrupts = <62>;
 			status = "disabled";
 		};
+
+		spi_l2_intc: interrupt-controller@411d00 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411d00 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <78>;
+		};
+
+		qspi: spi@443000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-qspi";
+			clocks = <&upg_clk>;
+			reg = <0x440920 0x4 0x443200 0x188 0x443000 0x50>;
+			reg-names = "cs_reg", "hif_mspi", "bspi";
+			interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+			interrupt-parent = <&spi_l2_intc>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overread",
+					  "mspi_done",
+					  "mspi_halted";
+			status = "disabled";
+		};
+
+		mspi: spi@406400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-mspi";
+			clocks = <&upg_clk>;
+			reg = <0x406400 0x180>;
+			reg-names = "mspi";
+			interrupts = <0x14>;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupt-names = "mspi_done";
+			status = "disabled";
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm7425.dtsi

@@ -450,5 +450,48 @@ sdhci1: sdhci@419200 {
 			mmc-hs200-1_8v;
 			status = "disabled";
 		};
+
+		spi_l2_intc: interrupt-controller@41ad00 {
+			compatible = "brcm,l2-intc";
+			reg = <0x41ad00 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <25>;
+		};
+
+		qspi: spi@41c000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-qspi";
+			clocks = <&upg_clk>;
+			reg = <0x419920 0x4 0x41c200 0x188 0x41c000 0x50>;
+			reg-names = "cs_reg", "hif_mspi", "bspi";
+			interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+			interrupt-parent = <&spi_l2_intc>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overread",
+					  "mspi_done",
+					  "mspi_halted";
+			status = "disabled";
+		};
+
+		mspi: spi@409200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-mspi";
+			clocks = <&upg_clk>;
+			reg = <0x409200 0x180>;
+			reg-names = "mspi";
+			interrupts = <0x14>;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupt-names = "mspi_done";
+			status = "disabled";
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm7435.dtsi

@@ -465,5 +465,48 @@ sdhci1: sdhci@41a200 {
 			mmc-hs200-1_8v;
 			status = "disabled";
 		};
+
+		spi_l2_intc: interrupt-controller@41bd00 {
+			compatible = "brcm,l2-intc";
+			reg = <0x41bd00 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <25>;
+		};
+
+		qspi: spi@41d200 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-qspi";
+			clocks = <&upg_clk>;
+			reg = <0x41a920 0x4 0x41d400 0x188 0x41d200 0x50>;
+			reg-names = "cs_reg", "hif_mspi", "bspi";
+			interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+			interrupt-parent = <&spi_l2_intc>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overread",
+					  "mspi_done",
+					  "mspi_halted";
+			status = "disabled";
+		};
+
+		mspi: spi@409200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-mspi";
+			clocks = <&upg_clk>;
+			reg = <0x409200 0x180>;
+			reg-names = "mspi";
+			interrupts = <0x14>;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupt-names = "mspi_done";
+			status = "disabled";
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm97125cbmb.dts

@@ -57,3 +57,7 @@ &ehci0 {
 &ohci0 {
 	status = "disabled";
 };
+
+&mspi {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm97346dbsmb.dts

@@ -109,3 +109,7 @@ &sata_phy {
 &sdhci0 {
 	status = "okay";
 };
+
+&mspi {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm97358svmb.dts

@@ -69,3 +69,39 @@ &ohci0 {
 &nand {
 	status = "okay";
 };
+
+&qspi {
+	status = "okay";
+
+	m25p80@0 {
+		compatible = "m25p80";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-cpol;
+		spi-cpha;
+		use-bspi;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash0.cfe@0 {
+				reg = <0x0 0x200000>;
+			};
+
+			flash0.mac@200000 {
+				reg = <0x200000 0x40000>;
+			};
+
+			flash0.nvram@240000 {
+				reg = <0x240000 0x10000>;
+			};
+		};
+	};
+};
+
+&mspi {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm97360svmb.dts

@@ -72,3 +72,39 @@ &sata_phy {
 &sdhci0 {
 	status = "okay";
 };
+
+&qspi {
+	status = "okay";
+
+	m25p80@0 {
+		compatible = "m25p80";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-cpol;
+		spi-cpha;
+		use-bspi;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash0.cfe@0 {
+				reg = <0x0 0x200000>;
+			};
+
+			flash0.mac@200000 {
+				reg = <0x200000 0x40000>;
+			};
+
+			flash0.nvram@240000 {
+				reg = <0x240000 0x10000>;
+			};
+		};
+	};
+};
+
+&mspi {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm97362svmb.dts

@@ -73,3 +73,7 @@ &sata_phy {
 &sdhci0 {
 	status = "okay";
 };
+
+&mspi {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm97420c.dts

@@ -79,3 +79,7 @@ &ehci1 {
 &ohci1 {
 	status = "okay";
 };
+
+&mspi {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm97425svmb.dts

@@ -107,3 +107,39 @@ &sdhci0 {
 &sdhci1 {
 	status = "okay";
 };
+
+&qspi {
+	status = "okay";
+
+	m25p80@0 {
+		compatible = "m25p80";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-cpol;
+		spi-cpha;
+		use-bspi;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash0.cfe@0 {
+				reg = <0x0 0x200000>;
+			};
+
+			flash0.mac@200000 {
+				reg = <0x200000 0x40000>;
+			};
+
+			flash0.nvram@240000 {
+				reg = <0x240000 0x10000>;
+			};
+		};
+	};
+};
+
+&mspi {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm97435svmb.dts

@@ -115,3 +115,7 @@ &sdhci0 {
 &sdhci1 {
 	status = "okay";
 };
+
+&mspi {
+	status = "okay";
+};

arch/mips/boot/dts/img/Makefile

+dtb-$(CONFIG_MACH_PISTACHIO)	+= pistachio_marduk.dtb
+
+obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj-				+= dummy.o
+
+always				:= $(dtb-y)
+clean-files			:= *.dtb *.dtb.S

arch/mips/boot/dts/img/pistachio_marduk.dts

+/*
+ * Copyright (C) 2015, 2016 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * IMG Marduk board is also known as Creator Ci40.
+ */
+
+/dts-v1/;
+
+#include "pistachio.dtsi"
+
+/ {
+	model = "IMG Marduk (Creator Ci40)";
+	compatible = "img,pistachio-marduk", "img,pistachio";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		ethernet0 = &enet;
+		spi0 = &spfi0;
+		spi1 = &spfi1;
+	};
+
+	chosen {
+		bootargs = "root=/dev/sda1 rootwait ro lpj=723968";
+		stdout-path = "serial1:115200";
+	};
+
+	memory {
+		device_type = "memory";
+		reg =  <0x00000000 0x10000000>;
+	};
+
+	reg_1v8: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "aux_adc_vref";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+	};
+
+	internal_dac_supply: internal-dac-supply {
+		compatible = "regulator-fixed";
+		regulator-name = "internal_dac_supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	leds {
+		compatible = "pwm-leds";
+		heartbeat {
+			label = "marduk:red:heartbeat";
+			pwms = <&pwm 3 300000>;
+			max-brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		button@1 {
+			label = "Button 1";
+			linux,code = <0x101>; /* BTN_1 */
+			gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			label = "Button 2";
+			linux,code = <0x102>; /* BTN_2 */
+			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&internal_dac {
+	VDD-supply = <&internal_dac_supply>;
+};
+
+&spfi1 {
+	status = "okay";
+
+	pinctrl-0 = <&spim1_pins>, <&spim1_quad_pins>, <&spim1_cs0_pin>,
+		    <&spim1_cs1_pin>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>, <&gpio0 1 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		compatible = "spansion,s25fl016k", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+	assigned-clock-rates = <114278400>, <1843200>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&enet {
+	status = "okay";
+};
+
+&pin_enet {
+	drive-strength = <2>;
+};
+
+&pin_enet_phy_clk {
+	drive-strength = <2>;
+};
+
+&sdhost {
+	status = "okay";
+	bus-width = <4>;
+	disable-wp;
+};
+
+&pin_sdhost_cmd {
+	drive-strength = <2>;
+};
+
+&pin_sdhost_data {
+	drive-strength = <2>;
+};
+
+&pwm {
+	status = "okay";
+
+	pinctrl-0 = <&pwmpdm0_pin>, <&pwmpdm1_pin>, <&pwmpdm2_pin>,
+		    <&pwmpdm3_pin>;
+	pinctrl-names = "default";
+};
+
+&adc {
+	status = "okay";
+	vref-supply = <&reg_1v8>;
+	adc-reserved-channels = <0x10>;
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+
+};
+
+&i2c3 {
+	status = "okay";
+	clock-frequency = <400000>;
+};

arch/mips/boot/dts/xilfpga/nexys4ddr.dts

@@ -17,6 +17,18 @@ cpuintc: interrupt-controller {
 		compatible = "mti,cpu-interrupt-controller";
 	};
 
+	axi_intc: interrupt-controller@10200000 {
+		#interrupt-cells = <1>;
+		compatible = "xlnx,xps-intc-1.00.a";
+		interrupt-controller;
+		reg = <0x10200000 0x10000>;
+		xlnx,kind-of-intr = <0x0>;
+		xlnx,num-intr-inputs = <0x6>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <6>;
+	};
+
 	axi_gpio: gpio@10600000 {
 		#gpio-cells = <1>;
 		compatible = "xlnx,xps-gpio-1.00.a";
@@ -30,6 +42,32 @@ axi_gpio: gpio@10600000 {
 		xlnx,tri-default = <0xffffffff>;
 	} ;
 
+	axi_ethernetlite: ethernet@10e00000 {
+		compatible = "xlnx,xps-ethernetlite-3.00.a";
+		device_type = "network";
+		interrupt-parent = <&axi_intc>;
+		interrupts = <1>;
+		phy-handle = <&phy0>;
+		reg = <0x10e00000 0x10000>;
+		xlnx,duplex = <0x1>;
+		xlnx,include-global-buffers = <0x1>;
+		xlnx,include-internal-loopback = <0x0>;
+		xlnx,include-mdio = <0x1>;
+		xlnx,instance = "axi_ethernetlite_inst";
+		xlnx,rx-ping-pong = <0x1>;
+		xlnx,s-axi-id-width = <0x1>;
+		xlnx,tx-ping-pong = <0x1>;
+		xlnx,use-internal = <0x0>;
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy0: phy@1 {
+				device_type = "ethernet-phy";
+				reg = <1>;
+			};
+		};
+	};
+
 	axi_uart16550: serial@10400000 {
 		compatible = "ns16550a";
 		reg = <0x10400000 0x10000>;
@@ -38,7 +76,32 @@ axi_uart16550: serial@10400000 {
 		reg-offset = <0x1000>;
 
 		clocks	= <&ext>;
+
+		interrupt-parent = <&axi_intc>;
+		interrupts = <0>;
 	};
+
+	axi_i2c: i2c@10A00000 {
+	    compatible = "xlnx,xps-iic-2.00.a";
+	    interrupt-parent = <&axi_intc>;
+	    interrupts = <4>;
+	    reg = < 0x10A00000 0x10000 >;
+	    clocks = <&ext>;
+	    xlnx,clk-freq = <0x5f5e100>;
+	    xlnx,family = "Artix7";
+	    xlnx,gpo-width = <0x1>;
+	    xlnx,iic-freq = <0x186a0>;
+	    xlnx,scl-inertial-delay = <0x0>;
+	    xlnx,sda-inertial-delay = <0x0>;
+	    xlnx,ten-bit-adr = <0x0>;
+	    #address-cells = <1>;
+	    #size-cells = <0>;
+
+	    ad7420@4B {
+		compatible = "adi,adt7420";
+		reg = <0x4B>;
+	    };
+	} ;
 };
 
 &ext {

arch/mips/cavium-octeon/Makefile

@@ -18,3 +18,4 @@ obj-y += crypto/
 obj-$(CONFIG_MTD)		      += flash_setup.o
 obj-$(CONFIG_SMP)		      += smp.o
 obj-$(CONFIG_OCTEON_ILM)	      += oct_ilm.o
+obj-$(CONFIG_USB)		      += octeon-usb.o

arch/mips/cavium-octeon/crypto/octeon-crypto.c

@@ -7,7 +7,7 @@
  */
 
 #include <asm/cop2.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/interrupt.h>
 
 #include "octeon-crypto.h"

arch/mips/cavium-octeon/dma-octeon.c

@@ -164,19 +164,14 @@ static void *octeon_dma_alloc_coherent(struct device *dev, size_t size,
 	/* ignore region specifiers */
 	gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
 
-#ifdef CONFIG_ZONE_DMA
-	if (dev == NULL)
+	if (IS_ENABLED(CONFIG_ZONE_DMA) && dev == NULL)
 		gfp |= __GFP_DMA;
-	else if (dev->coherent_dma_mask <= DMA_BIT_MASK(24))
+	else if (IS_ENABLED(CONFIG_ZONE_DMA) &&
+		 dev->coherent_dma_mask <= DMA_BIT_MASK(24))
 		gfp |= __GFP_DMA;
-	else
-#endif
-#ifdef CONFIG_ZONE_DMA32
-	     if (dev->coherent_dma_mask <= DMA_BIT_MASK(32))
+	else if (IS_ENABLED(CONFIG_ZONE_DMA32) &&
+		 dev->coherent_dma_mask <= DMA_BIT_MASK(32))
 		gfp |= __GFP_DMA32;
-	else
-#endif
-		;
 
 	/* Don't invoke OOM killer */
 	gfp |= __GFP_NORETRY;

arch/mips/cavium-octeon/executive/cvmx-bootmem.c

@@ -30,8 +30,8 @@
  * application start time.
  */
 
+#include <linux/export.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
 
 #include <asm/octeon/cvmx.h>
 #include <asm/octeon/cvmx-spinlock.h>

arch/mips/cavium-octeon/executive/cvmx-helper-errata.c

@@ -33,7 +33,7 @@
  * these functions directly.
  *
  */
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <asm/octeon/octeon.h>
 

arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c

@@ -287,8 +287,7 @@ cvmx_helper_link_info_t __cvmx_helper_rgmii_link_get(int ipd_port)
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state

arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c

@@ -500,8 +500,7 @@ cvmx_helper_link_info_t __cvmx_helper_sgmii_link_get(int ipd_port)
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state

arch/mips/cavium-octeon/executive/cvmx-helper-spi.c

@@ -188,8 +188,7 @@ cvmx_helper_link_info_t __cvmx_helper_spi_link_get(int ipd_port)
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state

arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c

@@ -295,8 +295,7 @@ cvmx_helper_link_info_t __cvmx_helper_xaui_link_get(int ipd_port)
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state

arch/mips/cavium-octeon/executive/cvmx-helper.c

@@ -69,10 +69,6 @@ void (*cvmx_override_ipd_port_setup) (int ipd_port);
 /* Port count per interface */
 static int interface_port_count[5];
 
-/* Port last configured link info index by IPD/PKO port */
-static cvmx_helper_link_info_t
-    port_link_info[CVMX_PIP_NUM_INPUT_PORTS];
-
 /**
  * Return the number of interfaces the chip has. Each interface
  * may have multiple ports. Most chips support two interfaces,
@@ -1135,41 +1131,6 @@ int cvmx_helper_initialize_packet_io_local(void)
 	return cvmx_pko_initialize_local();
 }
 
-/**
- * Auto configure an IPD/PKO port link state and speed. This
- * function basically does the equivalent of:
- * cvmx_helper_link_set(ipd_port, cvmx_helper_link_get(ipd_port));
- *
- * @ipd_port: IPD/PKO port to auto configure
- *
- * Returns Link state after configure
- */
-cvmx_helper_link_info_t cvmx_helper_link_autoconf(int ipd_port)
-{
-	cvmx_helper_link_info_t link_info;
-	int interface = cvmx_helper_get_interface_num(ipd_port);
-	int index = cvmx_helper_get_interface_index_num(ipd_port);
-
-	if (index >= cvmx_helper_ports_on_interface(interface)) {
-		link_info.u64 = 0;
-		return link_info;
-	}
-
-	link_info = cvmx_helper_link_get(ipd_port);
-	if (link_info.u64 == port_link_info[ipd_port].u64)
-		return link_info;
-
-	/* If we fail to set the link speed, port_link_info will not change */
-	cvmx_helper_link_set(ipd_port, link_info);
-
-	/*
-	 * port_link_info should be the current value, which will be
-	 * different than expect if cvmx_helper_link_set() failed.
-	 */
-	return port_link_info[ipd_port];
-}
-EXPORT_SYMBOL_GPL(cvmx_helper_link_autoconf);
-
 /**
  * Return the link state of an IPD/PKO port as returned by
  * auto negotiation. The result of this function may not match
@@ -1233,8 +1194,7 @@ EXPORT_SYMBOL_GPL(cvmx_helper_link_get);
  * Configure an IPD/PKO port for the specified link state. This
  * function does not influence auto negotiation at the PHY level.
  * The passed link state must always match the link state returned
- * by cvmx_helper_link_get(). It is normally best to use
- * cvmx_helper_link_autoconf() instead.
+ * by cvmx_helper_link_get().
  *
  * @ipd_port:  IPD/PKO port to configure
  * @link_info: The new link state
@@ -1276,11 +1236,6 @@ int cvmx_helper_link_set(int ipd_port, cvmx_helper_link_info_t link_info)
 	case CVMX_HELPER_INTERFACE_MODE_LOOP:
 		break;
 	}
-	/* Set the port_link_info here so that the link status is updated
-	   no matter how cvmx_helper_link_set is called. We don't change
-	   the value if link_set failed */
-	if (result == 0)
-		port_link_info[ipd_port].u64 = link_info.u64;
 	return result;
 }
 EXPORT_SYMBOL_GPL(cvmx_helper_link_set);

arch/mips/cavium-octeon/executive/cvmx-sysinfo.c

@@ -29,7 +29,7 @@
  * This module provides system/board/application information obtained
  * by the bootloader.
  */
-#include <linux/module.h>
+#include <linux/export.h>
 
 #include <asm/octeon/cvmx.h>
 #include <asm/octeon/cvmx-sysinfo.h>

arch/mips/cavium-octeon/octeon-memcpy.S

@@ -15,6 +15,7 @@
 
 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
+#include <asm/export.h>
 #include <asm/regdef.h>
 
 #define dst a0
@@ -142,6 +143,7 @@
  * t7 is used as a flag to note inatomic mode.
  */
 LEAF(__copy_user_inatomic)
+EXPORT_SYMBOL(__copy_user_inatomic)
 	b	__copy_user_common
 	 li	t7, 1
 	END(__copy_user_inatomic)
@@ -154,9 +156,11 @@ LEAF(__copy_user_inatomic)
  */
 	.align	5
 LEAF(memcpy)					/* a0=dst a1=src a2=len */
+EXPORT_SYMBOL(memcpy)
 	move	v0, dst				/* return value */
 __memcpy:
 FEXPORT(__copy_user)
+EXPORT_SYMBOL(__copy_user)
 	li	t7, 0				/* not inatomic */
 __copy_user_common:
 	/*
@@ -208,18 +212,18 @@ EXC(	STORE	t2, UNIT(6)(dst),	s_exc_p10u)
 	ADD	src, src, 16*NBYTES
 EXC(	STORE	t3, UNIT(7)(dst),	s_exc_p9u)
 	ADD	dst, dst, 16*NBYTES
-EXC(	LOAD	t0, UNIT(-8)(src),	l_exc_copy)
-EXC(	LOAD	t1, UNIT(-7)(src),	l_exc_copy)
-EXC(	LOAD	t2, UNIT(-6)(src),	l_exc_copy)
-EXC(	LOAD	t3, UNIT(-5)(src),	l_exc_copy)
+EXC(	LOAD	t0, UNIT(-8)(src),	l_exc_copy_rewind16)
+EXC(	LOAD	t1, UNIT(-7)(src),	l_exc_copy_rewind16)
+EXC(	LOAD	t2, UNIT(-6)(src),	l_exc_copy_rewind16)
+EXC(	LOAD	t3, UNIT(-5)(src),	l_exc_copy_rewind16)
 EXC(	STORE	t0, UNIT(-8)(dst),	s_exc_p8u)
 EXC(	STORE	t1, UNIT(-7)(dst),	s_exc_p7u)
 EXC(	STORE	t2, UNIT(-6)(dst),	s_exc_p6u)
 EXC(	STORE	t3, UNIT(-5)(dst),	s_exc_p5u)
-EXC(	LOAD	t0, UNIT(-4)(src),	l_exc_copy)
-EXC(	LOAD	t1, UNIT(-3)(src),	l_exc_copy)
-EXC(	LOAD	t2, UNIT(-2)(src),	l_exc_copy)
-EXC(	LOAD	t3, UNIT(-1)(src),	l_exc_copy)
+EXC(	LOAD	t0, UNIT(-4)(src),	l_exc_copy_rewind16)
+EXC(	LOAD	t1, UNIT(-3)(src),	l_exc_copy_rewind16)
+EXC(	LOAD	t2, UNIT(-2)(src),	l_exc_copy_rewind16)
+EXC(	LOAD	t3, UNIT(-1)(src),	l_exc_copy_rewind16)
 EXC(	STORE	t0, UNIT(-4)(dst),	s_exc_p4u)
 EXC(	STORE	t1, UNIT(-3)(dst),	s_exc_p3u)
 EXC(	STORE	t2, UNIT(-2)(dst),	s_exc_p2u)
@@ -383,6 +387,10 @@ done:
 	 nop
 	END(memcpy)
 
+l_exc_copy_rewind16:
+	/* Rewind src and dst by 16*NBYTES for l_exc_copy */
+	SUB	src, src, 16*NBYTES
+	SUB	dst, dst, 16*NBYTES
 l_exc_copy:
 	/*
 	 * Copy bytes from src until faulting load address (or until a
@@ -459,6 +467,7 @@ s_exc:
 
 	.align	5
 LEAF(memmove)
+EXPORT_SYMBOL(memmove)
 	ADD	t0, a0, a2
 	ADD	t1, a1, a2
 	sltu	t0, a1, t0			# dst + len <= src -> memcpy

arch/mips/cavium-octeon/octeon-platform.c

@@ -448,6 +448,7 @@ static struct of_device_id __initdata octeon_ids[] = {
 	{ .compatible = "cavium,octeon-3860-bootbus", },
 	{ .compatible = "cavium,mdio-mux", },
 	{ .compatible = "gpio-leds", },
+	{ .compatible = "cavium,octeon-7130-usb-uctl", },
 	{},
 };
 

arch/mips/cavium-octeon/setup.c

@@ -949,6 +949,29 @@ static __init void memory_exclude_page(u64 addr, u64 *mem, u64 *size)
 }
 #endif /* CONFIG_CRASH_DUMP */
 
+void __init fw_init_cmdline(void)
+{
+	int i;
+
+	octeon_boot_desc_ptr = (struct octeon_boot_descriptor *)fw_arg3;
+	for (i = 0; i < octeon_boot_desc_ptr->argc; i++) {
+		const char *arg =
+			cvmx_phys_to_ptr(octeon_boot_desc_ptr->argv[i]);
+		if (strlen(arcs_cmdline) + strlen(arg) + 1 <
+			   sizeof(arcs_cmdline) - 1) {
+			strcat(arcs_cmdline, " ");
+			strcat(arcs_cmdline, arg);
+		}
+	}
+}
+
+void __init *plat_get_fdt(void)
+{
+	octeon_bootinfo =
+		cvmx_phys_to_ptr(octeon_boot_desc_ptr->cvmx_desc_vaddr);
+	return phys_to_virt(octeon_bootinfo->fdt_addr);
+}
+
 void __init plat_mem_setup(void)
 {
 	uint64_t mem_alloc_size;

arch/mips/cavium-octeon/smp.c

@@ -11,7 +11,8 @@
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
 #include <linux/sched.h>
-#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/export.h>
 
 #include <asm/mmu_context.h>
 #include <asm/time.h>
@@ -24,12 +25,17 @@
 volatile unsigned long octeon_processor_boot = 0xff;
 volatile unsigned long octeon_processor_sp;
 volatile unsigned long octeon_processor_gp;
+#ifdef CONFIG_RELOCATABLE
+volatile unsigned long octeon_processor_relocated_kernel_entry;
+#endif /* CONFIG_RELOCATABLE */
 
 #ifdef CONFIG_HOTPLUG_CPU
 uint64_t octeon_bootloader_entry_addr;
 EXPORT_SYMBOL(octeon_bootloader_entry_addr);
 #endif
 
+extern void kernel_entry(unsigned long arg1, ...);
+
 static void octeon_icache_flush(void)
 {
 	asm volatile ("synci 0($0)\n");
@@ -180,6 +186,19 @@ static void __init octeon_smp_setup(void)
 	octeon_smp_hotplug_setup();
 }
 
+
+#ifdef CONFIG_RELOCATABLE
+int plat_post_relocation(long offset)
+{
+	unsigned long entry = (unsigned long)kernel_entry;
+
+	/* Send secondaries into relocated kernel */
+	octeon_processor_relocated_kernel_entry = entry + offset;
+
+	return 0;
+}
+#endif /* CONFIG_RELOCATABLE */
+
 /**
  * Firmware CPU startup hook
  *
@@ -272,7 +291,6 @@ static int octeon_cpu_disable(void)
 
 	set_cpu_online(cpu, false);
 	calculate_cpu_foreign_map();
-	cpumask_clear_cpu(cpu, &cpu_callin_map);
 	octeon_fixup_irqs();
 
 	__flush_cache_all();
@@ -333,8 +351,6 @@ void play_dead(void)
 		;
 }
 
-extern void kernel_entry(unsigned long arg1, ...);
-
 static void start_after_reset(void)
 {
 	kernel_entry(0, 0, 0);	/* set a2 = 0 for secondary core */

arch/mips/configs/cavium_octeon_defconfig

@@ -45,6 +45,7 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_LRO is not set
 CONFIG_IPV6=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
 # CONFIG_MTD_OF_PARTS is not set

arch/mips/configs/ip22_defconfig

@@ -67,8 +67,8 @@ CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m

arch/mips/configs/ip27_defconfig

@@ -133,7 +133,7 @@ CONFIG_LIBFC=m
 CONFIG_SCSI_QLOGIC_1280=y
 CONFIG_SCSI_PMCRAID=m
 CONFIG_SCSI_BFA_FC=m
-CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH=y
 CONFIG_SCSI_DH_RDAC=m
 CONFIG_SCSI_DH_HP_SW=m
 CONFIG_SCSI_DH_EMC=m
@@ -205,7 +205,6 @@ CONFIG_MLX4_EN=m
 # CONFIG_MLX4_DEBUG is not set
 CONFIG_TEHUTI=m
 CONFIG_BNX2X=m
-CONFIG_QLGE=m
 CONFIG_SFC=m
 CONFIG_BE2NET=m
 CONFIG_LIBERTAS_THINFIRM=m

arch/mips/configs/lemote2f_defconfig

@@ -39,7 +39,7 @@ CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION="/dev/hda3"
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m

arch/mips/configs/loongson1b_defconfig

@@ -74,6 +74,10 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_LOONGSON1=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_WATCHDOG_SYSFS=y
+CONFIG_LOONGSON1_WDT=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_HID_GENERIC=m
 CONFIG_USB_HID=m

arch/mips/configs/loongson1c_defconfig

@@ -75,6 +75,10 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_LOONGSON1=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_WATCHDOG_SYSFS=y
+CONFIG_LOONGSON1_WDT=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_HID_GENERIC=m
 CONFIG_USB_HID=m

arch/mips/configs/malta_defconfig

@@ -59,8 +59,8 @@ CONFIG_NETFILTER=y
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m

arch/mips/configs/malta_kvm_defconfig

@@ -60,8 +60,8 @@ CONFIG_NETFILTER=y
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m

arch/mips/configs/malta_kvm_guest_defconfig

@@ -59,8 +59,8 @@ CONFIG_NETFILTER=y
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m

arch/mips/configs/maltaup_xpa_defconfig

@@ -61,8 +61,8 @@ CONFIG_NETFILTER=y
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m

arch/mips/configs/nlm_xlp_defconfig

@@ -110,7 +110,7 @@ CONFIG_NETFILTER=y
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m

arch/mips/configs/nlm_xlr_defconfig

@@ -90,7 +90,7 @@ CONFIG_NETFILTER=y
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m

arch/mips/configs/xilfpga_defconfig

@@ -7,6 +7,12 @@ CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
 # CONFIG_BLOCK is not set
 # CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -14,6 +20,30 @@ CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 # CONFIG_ALLOW_DEV_COREDUMP is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_CORE is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_EZCHIP is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_RENESAS is not set
+# CONFIG_NET_VENDOR_ROCKER is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_XILINX_EMACLITE=y
+CONFIG_SMSC_PHY=y
+# CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
@@ -25,13 +55,18 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_XILINX=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_XILINX=y
-# CONFIG_HWMON is not set
+CONFIG_SENSORS_ADT7410=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MIPS_PLATFORM_DEVICES is not set
 # CONFIG_IOMMU_SUPPORT is not set
 # CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_PANIC_ON_OOPS=y
 # CONFIG_SCHED_DEBUG is not set

arch/mips/configs/xway_defconfig

 CONFIG_LANTIQ=y
+CONFIG_PCI_LANTIQ=y
 CONFIG_XRX200_PHY_FW=y
 CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_MIPS_VPE_LOADER=y
 # CONFIG_COMPACTION is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NR_CPUS=2
 CONFIG_HZ_100=y
 # CONFIG_SECCOMP is not set
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_GZIP is not set
@@ -22,8 +26,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_IOSCHED_CFQ is not set
+CONFIG_PCI=y
 # CONFIG_COREDUMP is not set
-# CONFIG_SUSPEND is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -35,12 +39,10 @@ CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_ARPD=y
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 CONFIG_TCP_CONG_ADVANCED=y
 # CONFIG_TCP_CONG_BIC is not set
@@ -62,7 +64,6 @@ CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NF_CONNTRACK_IPV4=m
-# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
@@ -84,6 +85,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_LANTIQ=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_XWAY=y
 CONFIG_EEPROM_93CX6=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
@@ -91,6 +94,7 @@ CONFIG_NETDEVICES=y
 CONFIG_LANTIQ_ETOP=y
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PHYLIB=y
+CONFIG_INTEL_XWAY_PHY=y
 CONFIG_PPP=m
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_MULTILINK=y
@@ -111,17 +115,21 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_LANTIQ=y
 CONFIG_SPI=y
 CONFIG_GPIO_MM_LANTIQ=y
 CONFIG_GPIO_STP_XWAY=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
+CONFIG_LANTIQ_WDT=y
 # CONFIG_HID is not set
 # CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_DWC2_PCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
@@ -151,9 +159,6 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_FTRACE is not set
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CRYPTO_MANAGER=m
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32_SARWATE=y
-CONFIG_AVERAGE=y

arch/mips/dec/prom/identify.c

@@ -7,7 +7,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/mc146818rtc.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/string.h>
 #include <linux/types.h>
 

arch/mips/dec/setup.c

@@ -9,12 +9,12 @@
  * Copyright (C) 2000, 2001, 2002, 2003, 2005  Maciej W. Rozycki
  */
 #include <linux/console.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/irq.h>
 #include <linux/irqnr.h>
-#include <linux/module.h>
 #include <linux/param.h>
 #include <linux/percpu-defs.h>
 #include <linux/sched.h>

arch/mips/dec/wbflush.c

@@ -14,6 +14,7 @@
  * Copyright (C) 2002 Maciej W. Rozycki
  */
 
+#include <linux/export.h>
 #include <linux/init.h>
 
 #include <asm/bootinfo.h>
@@ -88,7 +89,4 @@ static void wbflush_mips(void)
 {
 	__fast_iob();
 }
-
-#include <linux/module.h>
-
 EXPORT_SYMBOL(__wbflush);

arch/mips/emma/markeins/setup.c

@@ -90,7 +90,7 @@ void __init plat_time_init(void)
 static void markeins_board_init(void);
 extern void markeins_irq_setup(void);
 
-static void inline __init markeins_sio_setup(void)
+static inline void __init markeins_sio_setup(void)
 {
 }
 

arch/mips/generic/Makefile

@@ -13,3 +13,4 @@ obj-y += irq.o
 obj-y += proc.o
 
 obj-$(CONFIG_LEGACY_BOARD_SEAD3)	+= board-sead3.o
+obj-$(CONFIG_KEXEC)			+= kexec.o

arch/mips/generic/init.c

@@ -88,6 +88,19 @@ void __init *plat_get_fdt(void)
 	return (void *)fdt;
 }
 
+void __init plat_fdt_relocated(void *new_location)
+{
+	/*
+	 * reset fdt as the cached value would point to the location
+	 * before relocations happened and update the location argument
+	 * if it was passed using UHI
+	 */
+	fdt = NULL;
+
+	if (fw_arg0 == -2)
+		fw_arg1 = (unsigned long)new_location;
+}
+
 void __init plat_mem_setup(void)
 {
 	if (mach && mach->fixup_fdt)

arch/mips/generic/kexec.c

+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kexec.h>
+#include <linux/libfdt.h>
+#include <linux/uaccess.h>
+
+static int generic_kexec_prepare(struct kimage *image)
+{
+	int i;
+
+	for (i = 0; i < image->nr_segments; i++) {
+		struct fdt_header fdt;
+
+		if (image->segment[i].memsz <= sizeof(fdt))
+			continue;
+
+		if (copy_from_user(&fdt, image->segment[i].buf, sizeof(fdt)))
+			continue;
+
+		if (fdt_check_header(&fdt))
+			continue;
+
+		kexec_args[0] = -2;
+		kexec_args[1] = (unsigned long)
+			phys_to_virt((unsigned long)image->segment[i].mem);
+		break;
+	}
+	return 0;
+}
+
+static int __init register_generic_kexec(void)
+{
+	_machine_kexec_prepare = generic_kexec_prepare;
+	return 0;
+}
+arch_initcall(register_generic_kexec);

arch/mips/include/asm/Kbuild

@@ -4,6 +4,7 @@ generic-y += clkdev.h
 generic-y += current.h
 generic-y += dma-contiguous.h
 generic-y += emergency-restart.h
+generic-y += export.h
 generic-y += irq_work.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
@@ -15,6 +16,7 @@ generic-y += sections.h
 generic-y += segment.h
 generic-y += serial.h
 generic-y += trace_clock.h
+generic-y += unaligned.h
 generic-y += user.h
 generic-y += word-at-a-time.h
 generic-y += xor.h

arch/mips/include/asm/asm-prototypes.h

+#include <asm/checksum.h>
+#include <asm/page.h>
+#include <asm/fpu.h>
+#include <asm-generic/asm-prototypes.h>
+#include <asm/uaccess.h>

arch/mips/include/asm/asm.h

@@ -54,7 +54,8 @@
 		.align	2;				\
 		.type	symbol, @function;		\
 		.ent	symbol, 0;			\
-symbol:		.frame	sp, 0, ra
+symbol:		.frame	sp, 0, ra;			\
+		.insn
 
 /*
  * NESTED - declare nested routine entry point
@@ -64,7 +65,8 @@ symbol:		.frame	sp, 0, ra
 		.align	2;				\
 		.type	symbol, @function;		\
 		.ent	symbol, 0;			\
-symbol:		.frame	sp, framesize, rpc
+symbol:		.frame	sp, framesize, rpc;		\
+		.insn
 
 /*
  * END - mark end of function
@@ -86,7 +88,7 @@ symbol:		.frame	sp, framesize, rpc
 #define FEXPORT(symbol)					\
 		.globl	symbol;				\
 		.type	symbol, @function;		\
-symbol:
+symbol:		.insn
 
 /*
  * ABS - export absolute symbol

arch/mips/include/asm/bootinfo.h

@@ -164,6 +164,19 @@ static inline void plat_swiotlb_setup(void) {}
  * Return: Pointer to the flattened device tree blob.
  */
 extern void *plat_get_fdt(void);
+
+#ifdef CONFIG_RELOCATABLE
+
+/**
+ * plat_fdt_relocated() - Update platform's information about relocated dtb
+ *
+ * This function provides a platform-independent API to set platform's
+ * information about relocated DTB if it needs to be moved due to kernel
+ * relocation occurring at boot.
+ */
+void plat_fdt_relocated(void *new_location);
+
+#endif /* CONFIG_RELOCATABLE */
 #endif /* CONFIG_USE_OF */
 
 #endif /* _ASM_BOOTINFO_H */

arch/mips/include/asm/checksum.h

@@ -186,7 +186,9 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
 	"	daddu	%0, %4		\n"
 	"	dsll32	$1, %0, 0	\n"
 	"	daddu	%0, $1		\n"
+	"	sltu	$1, %0, $1	\n"
 	"	dsra32	%0, %0, 0	\n"
+	"	addu	%0, $1		\n"
 #endif
 	"	.set	pop"
 	: "=r" (sum)

arch/mips/include/asm/elf.h

@@ -210,6 +210,9 @@ typedef elf_greg_t elf_gregset_t[ELF_NGREG];
 typedef double elf_fpreg_t;
 typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 
+void mips_dump_regs32(u32 *uregs, const struct pt_regs *regs);
+void mips_dump_regs64(u64 *uregs, const struct pt_regs *regs);
+
 #ifdef CONFIG_32BIT
 /*
  * This is used to ensure we don't load something for the wrong architecture.
@@ -221,6 +224,9 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
  */
 #define ELF_CLASS	ELFCLASS32
 
+#define ELF_CORE_COPY_REGS(dest, regs) \
+	mips_dump_regs32((u32 *)&(dest), (regs));
+
 #endif /* CONFIG_32BIT */
 
 #ifdef CONFIG_64BIT
@@ -234,6 +240,9 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
  */
 #define ELF_CLASS	ELFCLASS64
 
+#define ELF_CORE_COPY_REGS(dest, regs) \
+	mips_dump_regs64((u64 *)&(dest), (regs));
+
 #endif /* CONFIG_64BIT */
 
 /*

arch/mips/include/asm/highmem.h

@@ -25,9 +25,6 @@
 #include <asm/cpu-features.h>
 #include <asm/kmap_types.h>
 
-/* undef for production */
-#define HIGHMEM_DEBUG 1
-
 /* declarations for highmem.c */
 extern unsigned long highstart_pfn, highend_pfn;
 

arch/mips/include/asm/i8259.h

@@ -40,7 +40,6 @@ extern raw_spinlock_t i8259A_lock;
 extern void make_8259A_irq(unsigned int irq);
 
 extern void init_i8259_irqs(void);
-extern int i8259_of_init(struct device_node *node, struct device_node *parent);
 
 /**
  * i8159_set_poll() - Override the i8259 polling function

arch/mips/include/asm/irq.h

@@ -17,6 +17,18 @@
 
 #include <irq.h>
 
+#define IRQ_STACK_SIZE			THREAD_SIZE
+
+extern void *irq_stack[NR_CPUS];
+
+static inline bool on_irq_stack(int cpu, unsigned long sp)
+{
+	unsigned long low = (unsigned long)irq_stack[cpu];
+	unsigned long high = low + IRQ_STACK_SIZE;
+
+	return (low <= sp && sp <= high);
+}
+
 #ifdef CONFIG_I8259
 static inline int irq_canonicalize(int irq)
 {

arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h

@@ -80,6 +80,15 @@ enum bcm47xx_board {
 	BCM47XX_BOARD_LINKSYS_WRT610NV2,
 	BCM47XX_BOARD_LINKSYS_WRTSL54GS,
 
+	BCM47XX_BOARD_LUXUL_ABR_4400_V1,
+	BCM47XX_BOARD_LUXUL_XAP_310_V1,
+	BCM47XX_BOARD_LUXUL_XAP_1210_V1,
+	BCM47XX_BOARD_LUXUL_XAP_1230_V1,
+	BCM47XX_BOARD_LUXUL_XAP_1240_V1,
+	BCM47XX_BOARD_LUXUL_XAP_1500_V1,
+	BCM47XX_BOARD_LUXUL_XBR_4400_V1,
+	BCM47XX_BOARD_LUXUL_XVW_P30_V1,
+	BCM47XX_BOARD_LUXUL_XWR_600_V1,
 	BCM47XX_BOARD_LUXUL_XWR_1750_V1,
 
 	BCM47XX_BOARD_MICROSOFT_MN700,

arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h

@@ -99,9 +99,20 @@
 	# to begin
 	#
 
-	# This is the variable where the next core to boot os stored
-	PTR_LA	t0, octeon_processor_boot
 octeon_spin_wait_boot:
+#ifdef CONFIG_RELOCATABLE
+	PTR_LA	t0, octeon_processor_relocated_kernel_entry
+	LONG_L	t0, (t0)
+	beq	zero, t0, 1f
+	nop
+
+	jr	t0
+	nop
+1:
+#endif /* CONFIG_RELOCATABLE */
+
+	# This is the variable where the next core to boot is stored
+	PTR_LA	t0, octeon_processor_boot
 	# Get the core id of the next to be booted
 	LONG_L	t1, (t0)
 	# Keep looping if it isn't me