b43: split upload of init values into 2 functions

There are two groups of init values. The first one has to be uploaded
once per wireless core reset but the second one on every band switch.
To implement band switching in an optimal way allow uploading band
init values only (by using a separated function).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/b43/main.c

@@ -2711,27 +2711,30 @@ static int b43_upload_initvals(struct b43_wldev *dev)
 	struct b43_firmware *fw = &dev->fw;
 	const struct b43_iv *ivals;
 	size_t count;
-	int err;
 
 	hdr = (const struct b43_fw_header *)(fw->initvals.data->data);
 	ivals = (const struct b43_iv *)(fw->initvals.data->data + hdr_len);
 	count = be32_to_cpu(hdr->size);
-	err = b43_write_initvals(dev, ivals, count,
+	return b43_write_initvals(dev, ivals, count,
 				 fw->initvals.data->size - hdr_len);
-	if (err)
-		goto out;
-	if (fw->initvals_band.data) {
+}
+
+static int b43_upload_initvals_band(struct b43_wldev *dev)
+{
+	const size_t hdr_len = sizeof(struct b43_fw_header);
+	const struct b43_fw_header *hdr;
+	struct b43_firmware *fw = &dev->fw;
+	const struct b43_iv *ivals;
+	size_t count;
+
+	if (!fw->initvals_band.data)
+		return 0;
+
 	hdr = (const struct b43_fw_header *)(fw->initvals_band.data->data);
 	ivals = (const struct b43_iv *)(fw->initvals_band.data->data + hdr_len);
 	count = be32_to_cpu(hdr->size);
-		err = b43_write_initvals(dev, ivals, count,
+	return b43_write_initvals(dev, ivals, count,
 				  fw->initvals_band.data->size - hdr_len);
-		if (err)
-			goto out;
-	}
-out:
-
-	return err;
 }
 
 /* Initialize the GPIOs
@@ -3100,6 +3103,10 @@ static int b43_chip_init(struct b43_wldev *dev)
 	if (err)
 		goto err_gpio_clean;
 
+	err = b43_upload_initvals_band(dev);
+	if (err)
+		goto err_gpio_clean;
+
 	/* Turn the Analog on and initialize the PHY. */
 	phy->ops->switch_analog(dev, 1);
 	err = b43_phy_init(dev);