Commit 0fbeae70 authored by Cristian Marussi's avatar Cristian Marussi Committed by Mark Brown

regulator: add SCMI driver

Add a simple regulator based on SCMI Voltage Domain Protocol.
Signed-off-by: default avatarCristian Marussi <cristian.marussi@arm.com>
----
v6 --> v7
- add proper blank lines between semantic blocks
- fix return value on error path of scmi_reg_is_enabled()
- use generic Failure message on err path of info_get()
- fix comment containing apostrophe

v3 --> v4
- using of_match_full_name core regulator flag
- avoid coccinelle falde complaints about pointer-sized allocations

v2 --> v3
- remove multiple linear mappings support
- removed duplicated voltage name printout
- added a few comments
- simplified return path in scmi_reg_set_voltage_sel()

v1 --> v2
- removed duplicate regulator naming
- removed redundant .get/set_voltage ops: only _sel variants implemented
- removed condexpr on fail path to increase readability

v0 --> v1
- fixed init_data constraint parsing
- fixes for v5.8 (linear_range.h)
- fixed commit message content and subject line format
- factored out SCMI core specific changes to distinct patch
- reworked Kconfig and Makefile to keep proper alphabetic order
- fixed SPDX comment style
- removed unneeded inline functions
- reworked conditionals for legibility
- fixed some return paths to properly report SCMI original errors codes
- added some more descriptive error messages when fw returns invalid ranges
- removed unneeded explicit devm_regulator_unregister from .remove()
Link: https://lore.kernel.org/r/20201123202336.46701-4-cristian.marussi@arm.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent e8056bf0
......@@ -155,6 +155,15 @@ config REGULATOR_ARIZONA_MICSUPP
and Wolfson Microelectronic Arizona codecs
devices.
config REGULATOR_ARM_SCMI
tristate "SCMI based regulator driver"
depends on ARM_SCMI_PROTOCOL && OF
help
This adds the regulator driver support for ARM platforms using SCMI
protocol for device voltage management.
This driver uses SCMI Message Protocol driver to interact with the
firmware providing the device Voltage functionality.
config REGULATOR_AS3711
tristate "AS3711 PMIC"
depends on MFD_AS3711
......
......@@ -24,6 +24,7 @@ obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
obj-$(CONFIG_REGULATOR_ARIZONA_LDO1) += arizona-ldo1.o
obj-$(CONFIG_REGULATOR_ARIZONA_MICSUPP) += arizona-micsupp.o
obj-$(CONFIG_REGULATOR_ARM_SCMI) += scmi-regulator.o
obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
......
// SPDX-License-Identifier: GPL-2.0
//
// System Control and Management Interface (SCMI) based regulator driver
//
// Copyright (C) 2020 ARM Ltd.
//
// Implements a regulator driver on top of the SCMI Voltage Protocol.
//
// The ARM SCMI Protocol aims in general to hide as much as possible all the
// underlying operational details while providing an abstracted interface for
// its users to operate upon: as a consequence the resulting operational
// capabilities and configurability of this regulator device are much more
// limited than the ones usually available on a standard physical regulator.
//
// The supported SCMI regulator ops are restricted to the bare minimum:
//
// - 'status_ops': enable/disable/is_enabled
// - 'voltage_ops': get_voltage_sel/set_voltage_sel
// list_voltage/map_voltage
//
// Each SCMI regulator instance is associated, through the means of a proper DT
// entry description, to a specific SCMI Voltage Domain.
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/linear_range.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/scmi_protocol.h>
#include <linux/slab.h>
#include <linux/types.h>
struct scmi_regulator {
u32 id;
struct scmi_device *sdev;
struct regulator_dev *rdev;
struct device_node *of_node;
struct regulator_desc desc;
struct regulator_config conf;
};
struct scmi_regulator_info {
int num_doms;
struct scmi_regulator **sregv;
};
static int scmi_reg_enable(struct regulator_dev *rdev)
{
struct scmi_regulator *sreg = rdev_get_drvdata(rdev);
const struct scmi_handle *handle = sreg->sdev->handle;
return handle->voltage_ops->config_set(handle, sreg->id,
SCMI_VOLTAGE_ARCH_STATE_ON);
}
static int scmi_reg_disable(struct regulator_dev *rdev)
{
struct scmi_regulator *sreg = rdev_get_drvdata(rdev);
const struct scmi_handle *handle = sreg->sdev->handle;
return handle->voltage_ops->config_set(handle, sreg->id,
SCMI_VOLTAGE_ARCH_STATE_OFF);
}
static int scmi_reg_is_enabled(struct regulator_dev *rdev)
{
int ret;
u32 config;
struct scmi_regulator *sreg = rdev_get_drvdata(rdev);
const struct scmi_handle *handle = sreg->sdev->handle;
ret = handle->voltage_ops->config_get(handle, sreg->id,
&config);
if (ret) {
dev_err(&sreg->sdev->dev,
"Error %d reading regulator %s status.\n",
ret, sreg->desc.name);
return ret;
}
return config & SCMI_VOLTAGE_ARCH_STATE_ON;
}
static int scmi_reg_get_voltage_sel(struct regulator_dev *rdev)
{
int ret;
s32 volt_uV;
struct scmi_regulator *sreg = rdev_get_drvdata(rdev);
const struct scmi_handle *handle = sreg->sdev->handle;
ret = handle->voltage_ops->level_get(handle, sreg->id, &volt_uV);
if (ret)
return ret;
return sreg->desc.ops->map_voltage(rdev, volt_uV, volt_uV);
}
static int scmi_reg_set_voltage_sel(struct regulator_dev *rdev,
unsigned int selector)
{
s32 volt_uV;
struct scmi_regulator *sreg = rdev_get_drvdata(rdev);
const struct scmi_handle *handle = sreg->sdev->handle;
volt_uV = sreg->desc.ops->list_voltage(rdev, selector);
if (volt_uV <= 0)
return -EINVAL;
return handle->voltage_ops->level_set(handle, sreg->id, 0x0, volt_uV);
}
static const struct regulator_ops scmi_reg_fixed_ops = {
.enable = scmi_reg_enable,
.disable = scmi_reg_disable,
.is_enabled = scmi_reg_is_enabled,
};
static const struct regulator_ops scmi_reg_linear_ops = {
.enable = scmi_reg_enable,
.disable = scmi_reg_disable,
.is_enabled = scmi_reg_is_enabled,
.get_voltage_sel = scmi_reg_get_voltage_sel,
.set_voltage_sel = scmi_reg_set_voltage_sel,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
};
static const struct regulator_ops scmi_reg_discrete_ops = {
.enable = scmi_reg_enable,
.disable = scmi_reg_disable,
.is_enabled = scmi_reg_is_enabled,
.get_voltage_sel = scmi_reg_get_voltage_sel,
.set_voltage_sel = scmi_reg_set_voltage_sel,
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_iterate,
};
static int
scmi_config_linear_regulator_mappings(struct scmi_regulator *sreg,
const struct scmi_voltage_info *vinfo)
{
s32 delta_uV;
/*
* Note that SCMI voltage domains describable by linear ranges
* (segments) {low, high, step} are guaranteed to come in one single
* triplet by the SCMI Voltage Domain protocol support itself.
*/
delta_uV = (vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_HIGH] -
vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_LOW]);
/* Rule out buggy negative-intervals answers from fw */
if (delta_uV < 0) {
dev_err(&sreg->sdev->dev,
"Invalid volt-range %d-%duV for domain %d\n",
vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_LOW],
vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_HIGH],
sreg->id);
return -EINVAL;
}
if (!delta_uV) {
/* Just one fixed voltage exposed by SCMI */
sreg->desc.fixed_uV =
vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_LOW];
sreg->desc.n_voltages = 1;
sreg->desc.ops = &scmi_reg_fixed_ops;
} else {
/* One simple linear mapping. */
sreg->desc.min_uV =
vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_LOW];
sreg->desc.uV_step =
vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_STEP];
sreg->desc.linear_min_sel = 0;
sreg->desc.n_voltages = delta_uV / sreg->desc.uV_step;
sreg->desc.ops = &scmi_reg_linear_ops;
}
return 0;
}
static int
scmi_config_discrete_regulator_mappings(struct scmi_regulator *sreg,
const struct scmi_voltage_info *vinfo)
{
/* Discrete non linear levels are mapped to volt_table */
sreg->desc.n_voltages = vinfo->num_levels;
if (sreg->desc.n_voltages > 1) {
sreg->desc.volt_table = (const unsigned int *)vinfo->levels_uv;
sreg->desc.ops = &scmi_reg_discrete_ops;
} else {
sreg->desc.fixed_uV = vinfo->levels_uv[0];
sreg->desc.ops = &scmi_reg_fixed_ops;
}
return 0;
}
static int scmi_regulator_common_init(struct scmi_regulator *sreg)
{
int ret;
const struct scmi_handle *handle = sreg->sdev->handle;
struct device *dev = &sreg->sdev->dev;
const struct scmi_voltage_info *vinfo;
vinfo = handle->voltage_ops->info_get(handle, sreg->id);
if (!vinfo) {
dev_warn(dev, "Failure to get voltage domain %d\n",
sreg->id);
return -ENODEV;
}
/*
* Regulator framework does not fully support negative voltages
* so we discard any voltage domain reported as supporting negative
* voltages: as a consequence each levels_uv entry is guaranteed to
* be non-negative from here on.
*/
if (vinfo->negative_volts_allowed) {
dev_warn(dev, "Negative voltages NOT supported...skip %s\n",
sreg->of_node->full_name);
return -EOPNOTSUPP;
}
sreg->desc.name = devm_kasprintf(dev, GFP_KERNEL, "%s", vinfo->name);
if (!sreg->desc.name)
return -ENOMEM;
sreg->desc.id = sreg->id;
sreg->desc.type = REGULATOR_VOLTAGE;
sreg->desc.owner = THIS_MODULE;
sreg->desc.of_match_full_name = true;
sreg->desc.of_match = sreg->of_node->full_name;
sreg->desc.regulators_node = "regulators";
if (vinfo->segmented)
ret = scmi_config_linear_regulator_mappings(sreg, vinfo);
else
ret = scmi_config_discrete_regulator_mappings(sreg, vinfo);
if (ret)
return ret;
/*
* Using the scmi device here to have DT searched from Voltage
* protocol node down.
*/
sreg->conf.dev = dev;
/* Store for later retrieval via rdev_get_drvdata() */
sreg->conf.driver_data = sreg;
return 0;
}
static int process_scmi_regulator_of_node(struct scmi_device *sdev,
struct device_node *np,
struct scmi_regulator_info *rinfo)
{
u32 dom, ret;
ret = of_property_read_u32(np, "reg", &dom);
if (ret)
return ret;
if (dom >= rinfo->num_doms)
return -ENODEV;
if (rinfo->sregv[dom]) {
dev_err(&sdev->dev,
"SCMI Voltage Domain %d already in use. Skipping: %s\n",
dom, np->full_name);
return -EINVAL;
}
rinfo->sregv[dom] = devm_kzalloc(&sdev->dev,
sizeof(struct scmi_regulator),
GFP_KERNEL);
if (!rinfo->sregv[dom])
return -ENOMEM;
rinfo->sregv[dom]->id = dom;
rinfo->sregv[dom]->sdev = sdev;
/* get hold of good nodes */
of_node_get(np);
rinfo->sregv[dom]->of_node = np;
dev_dbg(&sdev->dev,
"Found SCMI Regulator entry -- OF node [%d] -> %s\n",
dom, np->full_name);
return 0;
}
static int scmi_regulator_probe(struct scmi_device *sdev)
{
int d, ret, num_doms;
struct device_node *np, *child;
const struct scmi_handle *handle = sdev->handle;
struct scmi_regulator_info *rinfo;
if (!handle || !handle->voltage_ops)
return -ENODEV;
num_doms = handle->voltage_ops->num_domains_get(handle);
if (num_doms <= 0) {
if (!num_doms) {
dev_err(&sdev->dev,
"number of voltage domains invalid\n");
num_doms = -EINVAL;
} else {
dev_err(&sdev->dev,
"failed to get voltage domains - err:%d\n",
num_doms);
}
return num_doms;
}
rinfo = devm_kzalloc(&sdev->dev, sizeof(*rinfo), GFP_KERNEL);
if (!rinfo)
return -ENOMEM;
/* Allocate pointers array for all possible domains */
rinfo->sregv = devm_kcalloc(&sdev->dev, num_doms,
sizeof(void *), GFP_KERNEL);
if (!rinfo->sregv)
return -ENOMEM;
rinfo->num_doms = num_doms;
/*
* Start collecting into rinfo->sregv possibly good SCMI Regulators as
* described by a well-formed DT entry and associated with an existing
* plausible SCMI Voltage Domain number, all belonging to this SCMI
* platform instance node (handle->dev->of_node).
*/
np = of_find_node_by_name(handle->dev->of_node, "regulators");
for_each_child_of_node(np, child) {
ret = process_scmi_regulator_of_node(sdev, child, rinfo);
/* abort on any mem issue */
if (ret == -ENOMEM)
return ret;
}
/*
* Register a regulator for each valid regulator-DT-entry that we
* can successfully reach via SCMI and has a valid associated voltage
* domain.
*/
for (d = 0; d < num_doms; d++) {
struct scmi_regulator *sreg = rinfo->sregv[d];
/* Skip empty slots */
if (!sreg)
continue;
ret = scmi_regulator_common_init(sreg);
/* Skip invalid voltage domains */
if (ret)
continue;
sreg->rdev = devm_regulator_register(&sdev->dev, &sreg->desc,
&sreg->conf);
if (IS_ERR(sreg->rdev)) {
sreg->rdev = NULL;
continue;
}
dev_info(&sdev->dev,
"Regulator %s registered for domain [%d]\n",
sreg->desc.name, sreg->id);
}
dev_set_drvdata(&sdev->dev, rinfo);
return 0;
}
static void scmi_regulator_remove(struct scmi_device *sdev)
{
int d;
struct scmi_regulator_info *rinfo;
rinfo = dev_get_drvdata(&sdev->dev);
if (!rinfo)
return;
for (d = 0; d < rinfo->num_doms; d++) {
if (!rinfo->sregv[d])
continue;
of_node_put(rinfo->sregv[d]->of_node);
}
}
static const struct scmi_device_id scmi_regulator_id_table[] = {
{ SCMI_PROTOCOL_VOLTAGE, "regulator" },
{ },
};
MODULE_DEVICE_TABLE(scmi, scmi_regulator_id_table);
static struct scmi_driver scmi_drv = {
.name = "scmi-regulator",
.probe = scmi_regulator_probe,
.remove = scmi_regulator_remove,
.id_table = scmi_regulator_id_table,
};
module_scmi_driver(scmi_drv);
MODULE_AUTHOR("Cristian Marussi <cristian.marussi@arm.com>");
MODULE_DESCRIPTION("ARM SCMI regulator driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment