Commit 100bc3e2 authored by Peter Shih's avatar Peter Shih Committed by Greg Kroah-Hartman

tty: serial: 8250_mtk: always resume the device in probe.

serial8250_register_8250_port calls uart_config_port, which calls
config_port on the port before it tries to power on the port. So we need
the port to be on before calling serial8250_register_8250_port. Change
the code to always do a runtime resume in probe before registering port,
and always do a runtime suspend in remove.

This basically reverts the change in commit 68e5fc4a ("tty: serial:
8250_mtk: use pm_runtime callbacks for enabling"), but still use
pm_runtime callbacks.

Fixes: 68e5fc4a ("tty: serial: 8250_mtk: use pm_runtime callbacks for enabling")
Signed-off-by: default avatarPeter Shih <pihsun@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 2a486026
......@@ -213,17 +213,17 @@ static int mtk8250_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, data);
pm_runtime_enable(&pdev->dev);
if (!pm_runtime_enabled(&pdev->dev)) {
err = mtk8250_runtime_resume(&pdev->dev);
if (err)
return err;
}
data->line = serial8250_register_8250_port(&uart);
if (data->line < 0)
return data->line;
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
return 0;
}
......@@ -234,13 +234,11 @@ static int mtk8250_remove(struct platform_device *pdev)
pm_runtime_get_sync(&pdev->dev);
serial8250_unregister_port(data->line);
mtk8250_runtime_suspend(&pdev->dev);
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
if (!pm_runtime_status_suspended(&pdev->dev))
mtk8250_runtime_suspend(&pdev->dev);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment