Commit 10b97f38 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "By far most of the fixes here are updates to DTS files to deal with
  some mostly minor bugs.

  There's also a fix to deal with non-PM kernel configs on i.MX, a
  regression fix for ethernet on PXA platforms and a dependency fix for
  OMAP"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: keystone: dts: rename pcie nodes to help override status
  ARM: keystone: dts: fix dt bindings for PCIe
  ARM: pxa: fix dm9000 platform data regression
  ARM: dts: Correct audio input route & set mic bias for am335x-pepper
  ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XX
  MAINTAINERS: digicolor: add dts files
  ARM: ux500: fix MMC/SD card regression
  ARM: ux500: define serial port aliases
  ARM: dts: OMAP5: Add #iommu-cells property to IOMMUs
  ARM: dts: OMAP4: Add #iommu-cells property to IOMMUs
  ARM: dts: Fix frequency scaling on Gumstix Pepper
  ARM: dts: configure regulators for Gumstix Pepper
  ARM: dts: omap3: overo: Update LCD panel names
  ARM: dts: cros-ec-keyboard: Add support for some Japanese keys
  ARM: imx6: gpc: always enable PU domain if CONFIG_PM is not set
  ARM: dts: imx53-qsb: fix TVE entry
  ARM: dts: mx23: fix iio-hwmon support
  ARM: dts: imx27: Adjust the GPT compatible string
  ARM: socfpga: dts: Fix entries order
  ARM: socfpga: dts: Fix adxl34x formating and compatible string
parents 9d37e667 3eae03da
......@@ -1001,6 +1001,7 @@ ARM/CONEXANT DIGICOLOR MACHINE SUPPORT
M: Baruch Siach <baruch@tkos.co.il>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/boot/dts/cx92755*
N: digicolor
ARM/EBSA110 MACHINE SUPPORT
......
......@@ -74,6 +74,7 @@ eeprom: eeprom@50 {
audio_codec: tlv320aic3106@1b {
compatible = "ti,tlv320aic3106";
reg = <0x1b>;
ai3x-micbias-vg = <0x2>;
};
accel: lis331dlh@1d {
......@@ -153,7 +154,7 @@ &sound {
ti,audio-routing =
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT",
"LINE1L", "Line In";
"MIC3L", "Mic3L Switch";
};
&mcasp0 {
......@@ -438,41 +439,50 @@ backlight {
regulators {
dcdc1_reg: regulator@0 {
/* VDD_1V8 system supply */
regulator-always-on;
};
dcdc2_reg: regulator@1 {
/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <1325000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-always-on;
};
dcdc3_reg: regulator@2 {
/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <1150000>;
regulator-max-microvolt = <1325000>;
regulator-boot-on;
regulator-always-on;
};
ldo1_reg: regulator@3 {
/* VRTC 1.8V always-on supply */
regulator-name = "vrtc,vdds";
regulator-always-on;
};
ldo2_reg: regulator@4 {
/* 3.3V rail */
regulator-name = "vdd_3v3aux";
regulator-always-on;
};
ldo3_reg: regulator@5 {
/* VDD_3V3A 3.3V rail */
regulator-name = "vdd_3v3a";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo4_reg: regulator@6 {
/* VDD_3V3B 3.3V rail */
regulator-name = "vdd_3v3b";
regulator-always-on;
};
};
};
......
......@@ -22,6 +22,7 @@ MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
MATRIX_KEY(0x00, 0x02, KEY_F1)
MATRIX_KEY(0x00, 0x03, KEY_B)
MATRIX_KEY(0x00, 0x04, KEY_F10)
MATRIX_KEY(0x00, 0x05, KEY_RO)
MATRIX_KEY(0x00, 0x06, KEY_N)
MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
......@@ -34,6 +35,7 @@ MATRIX_KEY(0x01, 0x06, KEY_H)
MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
MATRIX_KEY(0x01, 0x09, KEY_F9)
MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
MATRIX_KEY(0x01, 0x0c, KEY_HENKAN)
MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
MATRIX_KEY(0x02, 0x01, KEY_TAB)
......@@ -45,6 +47,7 @@ MATRIX_KEY(0x02, 0x06, KEY_Y)
MATRIX_KEY(0x02, 0x07, KEY_102ND)
MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
MATRIX_KEY(0x02, 0x09, KEY_F8)
MATRIX_KEY(0x02, 0x0a, KEY_YEN)
MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
MATRIX_KEY(0x03, 0x02, KEY_F2)
......@@ -53,6 +56,7 @@ MATRIX_KEY(0x03, 0x04, KEY_F5)
MATRIX_KEY(0x03, 0x06, KEY_6)
MATRIX_KEY(0x03, 0x08, KEY_MINUS)
MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN)
MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
MATRIX_KEY(0x04, 0x01, KEY_A)
......
......@@ -468,6 +468,7 @@ lradc: lradc@80050000 {
interrupts = <36 37 38 39 40 41 42 43 44>;
status = "disabled";
clocks = <&clks 26>;
#io-channel-cells = <1>;
};
spdif@80054000 {
......
......@@ -108,7 +108,7 @@ wdog: wdog@10002000 {
};
gpt1: timer@10003000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10003000 0x1000>;
interrupts = <26>;
clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
......@@ -117,7 +117,7 @@ gpt1: timer@10003000 {
};
gpt2: timer@10004000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10004000 0x1000>;
interrupts = <25>;
clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
......@@ -126,7 +126,7 @@ gpt2: timer@10004000 {
};
gpt3: timer@10005000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10005000 0x1000>;
interrupts = <24>;
clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
......@@ -376,7 +376,7 @@ cspi3: cspi@10017000 {
};
gpt4: timer@10019000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10019000 0x1000>;
interrupts = <4>;
clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
......@@ -385,7 +385,7 @@ gpt4: timer@10019000 {
};
gpt5: timer@1001a000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x1001a000 0x1000>;
interrupts = <3>;
clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
......@@ -436,7 +436,7 @@ sdhci3: sdhci@1001e000 {
};
gpt6: timer@1001f000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x1001f000 0x1000>;
interrupts = <2>;
clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,
......
......@@ -295,9 +295,10 @@ MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
&tve {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_vga_sync>;
ddc-i2c-bus = <&i2c2>;
fsl,tve-mode = "vga";
fsl,hsync-pin = <4>;
fsl,vsync-pin = <6>;
fsl,hsync-pin = <7>; /* IPU DI1 PIN7 via EIM_OE */
fsl,vsync-pin = <8>; /* IPU DI1 PIN8 via EIM_RW */
status = "okay";
};
......
......@@ -86,7 +86,7 @@ dspgpio0: keystone_dsp_gpio@02620240 {
gpio,syscon-dev = <&devctrl 0x240>;
};
pcie@21020000 {
pcie1: pcie@21020000 {
compatible = "ti,keystone-pcie","snps,dw-pcie";
clocks = <&clkpcie1>;
clock-names = "pcie";
......@@ -96,6 +96,7 @@ pcie@21020000 {
ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000
0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
status = "disabled";
device_type = "pci";
num-lanes = <2>;
......
......@@ -286,7 +286,7 @@ kirq0: keystone_irq@26202a0 {
ti,syscon-dev = <&devctrl 0x2a0>;
};
pcie@21800000 {
pcie0: pcie@21800000 {
compatible = "ti,keystone-pcie", "snps,dw-pcie";
clocks = <&clkpcie>;
clock-names = "pcie";
......@@ -296,6 +296,7 @@ pcie@21800000 {
ranges = <0x81000000 0 0 0x23250000 0 0x4000
0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
status = "disabled";
device_type = "pci";
num-lanes = <2>;
......
......@@ -120,7 +120,7 @@ &mcspi1 {
lcd0: display@0 {
compatible = "lgphilips,lb035q02";
label = "lcd";
label = "lcd35";
reg = <1>; /* CS1 */
spi-max-frequency = <10000000>;
......
......@@ -98,7 +98,7 @@ aliases {
lcd0: display@0 {
compatible = "samsung,lte430wq-f0c", "panel-dpi";
label = "lcd";
label = "lcd43";
pinctrl-names = "default";
pinctrl-0 = <&lte430_pins>;
......
......@@ -551,6 +551,7 @@ mmu_dsp: mmu@4a066000 {
reg = <0x4a066000 0x100>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu_dsp";
#iommu-cells = <0>;
};
mmu_ipu: mmu@55082000 {
......@@ -558,6 +559,7 @@ mmu_ipu: mmu@55082000 {
reg = <0x55082000 0x100>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu_ipu";
#iommu-cells = <0>;
ti,iommu-bus-err-back;
};
......
......@@ -612,6 +612,7 @@ mmu_dsp: mmu@4a066000 {
reg = <0x4a066000 0x100>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu_dsp";
#iommu-cells = <0>;
};
mmu_ipu: mmu@55082000 {
......@@ -619,6 +620,7 @@ mmu_ipu: mmu@55082000 {
reg = <0x55082000 0x100>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu_ipu";
#iommu-cells = <0>;
ti,iommu-bus-err-back;
};
......
......@@ -60,27 +60,27 @@ &gmac1 {
rxc-skew-ps = <2000>;
};
&mmc0 {
vmmc-supply = <&regulator_3_3v>;
vqmmc-supply = <&regulator_3_3v>;
};
&usb1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&i2c1{
&i2c1 {
status = "okay";
accel1: accel1@53{
compatible = "adxl34x";
accel1: accelerometer@53 {
compatible = "adi,adxl345";
reg = <0x53>;
interrupt-parent = < &portc >;
interrupt-parent = <&portc>;
interrupts = <3 2>;
};
};
&mmc0 {
vmmc-supply = <&regulator_3_3v>;
vqmmc-supply = <&regulator_3_3v>;
};
&usb1 {
status = "okay";
};
......@@ -17,6 +17,13 @@ / {
model = "ST-Ericsson U8540 platform with Device Tree";
compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
/* This stablilizes the serial port enumeration */
aliases {
serial0 = &ux500_serial0;
serial1 = &ux500_serial1;
serial2 = &ux500_serial2;
};
memory@0 {
device_type = "memory";
reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
......
......@@ -16,6 +16,13 @@ / {
model = "ST-Ericsson CCU9540 platform with Device Tree";
compatible = "st-ericsson,ccu9540", "st-ericsson,u9540";
/* This stablilizes the serial port enumeration */
aliases {
serial0 = &ux500_serial0;
serial1 = &ux500_serial1;
serial2 = &ux500_serial2;
};
memory {
reg = <0x00000000 0x20000000>;
};
......
......@@ -971,7 +971,7 @@ spi@80129000 {
power-domains = <&pm_domains DOMAIN_VAPE>;
};
uart@80120000 {
ux500_serial0: uart@80120000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80120000 0x1000>;
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
......@@ -986,7 +986,7 @@ uart@80120000 {
status = "disabled";
};
uart@80121000 {
ux500_serial1: uart@80121000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80121000 0x1000>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
......@@ -1001,7 +1001,7 @@ uart@80121000 {
status = "disabled";
};
uart@80007000 {
ux500_serial2: uart@80007000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80007000 0x1000>;
interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
......
......@@ -32,11 +32,11 @@ uart@80120000 {
status = "okay";
};
/* This UART is unused and thus left disabled */
uart@80121000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart1_default_mode>;
pinctrl-1 = <&uart1_sleep_mode>;
status = "okay";
};
uart@80007000 {
......
......@@ -17,6 +17,13 @@ / {
model = "ST-Ericsson HREF (pre-v60) and ST UIB";
compatible = "st-ericsson,mop500", "st-ericsson,u8500";
/* This stablilizes the serial port enumeration */
aliases {
serial0 = &ux500_serial0;
serial1 = &ux500_serial1;
serial2 = &ux500_serial2;
};
soc {
/* Reset line for the BU21013 touchscreen */
i2c@80110000 {
......
......@@ -16,4 +16,11 @@
/ {
model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
compatible = "st-ericsson,mop500", "st-ericsson,u8500";
/* This stablilizes the serial port enumeration */
aliases {
serial0 = &ux500_serial0;
serial1 = &ux500_serial1;
serial2 = &ux500_serial2;
};
};
......@@ -23,6 +23,11 @@ button@1 {
};
soc {
/* Enable UART1 on this board */
uart@80121000 {
status = "okay";
};
i2c@80004000 {
tps61052@33 {
compatible = "tps61052";
......
......@@ -19,6 +19,13 @@ / {
model = "ST-Ericsson HREF (v60+) and ST UIB";
compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
/* This stablilizes the serial port enumeration */
aliases {
serial0 = &ux500_serial0;
serial1 = &ux500_serial1;
serial2 = &ux500_serial2;
};
soc {
/* Reset line for the BU21013 touchscreen */
i2c@80110000 {
......
......@@ -18,4 +18,11 @@
/ {
model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
/* This stablilizes the serial port enumeration */
aliases {
serial0 = &ux500_serial0;
serial1 = &ux500_serial1;
serial2 = &ux500_serial2;
};
};
......@@ -43,15 +43,26 @@ pinctrl {
<&vaudio_hf_hrefv60_mode>,
<&gbf_hrefv60_mode>,
<&hdtv_hrefv60_mode>,
<&touch_hrefv60_mode>;
<&touch_hrefv60_mode>,
<&gpios_hrefv60_mode>;
sdi0 {
/* SD card detect GPIO pin, extend default state */
sdi0_default_mode: sdi0_default {
/* SD card detect GPIO pin, extend default state */
default_hrefv60_cfg1 {
pins = "GPIO95_E8";
ste,config = <&gpio_in_pu>;
};
/* VMMCI level-shifter enable */
default_hrefv60_cfg2 {
pins = "GPIO169_D22";
ste,config = <&gpio_out_lo>;
};
/* VMMCI level-shifter voltage select */
default_hrefv60_cfg3 {
pins = "GPIO5_AG6";
ste,config = <&gpio_out_hi>;
};
};
};
ipgpio {
......@@ -213,6 +224,16 @@ hrefv60_cfg2 {
};
};
};
gpios {
/* Dangling GPIO pins */
gpios_hrefv60_mode: gpios_hrefv60 {
default_cfg1 {
/* Normally UART1 RXD, now dangling */
pins = "GPIO4_AH6";
ste,config = <&in_pu>;
};
};
};
};
};
};
......@@ -18,6 +18,13 @@ / {
model = "Calao Systems Snowball platform with device tree";
compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
/* This stablilizes the serial port enumeration */
aliases {
serial0 = &ux500_serial0;
serial1 = &ux500_serial1;
serial2 = &ux500_serial2;
};
memory {
reg = <0x00000000 0x20000000>;
};
......@@ -223,11 +230,11 @@ uart@80120000 {
status = "okay";
};
/* This UART is unused and thus left disabled */
uart@80121000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart1_default_mode>;
pinctrl-1 = <&uart1_sleep_mode>;
status = "okay";
};
uart@80007000 {
......@@ -452,7 +459,21 @@ snowball_cfg1 {
pins = "GPIO21_AB3"; /* DAT31DIR */
ste,config = <&out_hi>;
};
/* SD card detect GPIO pin, extend default state */
snowball_cfg2 {
pins = "GPIO218_AH11";
ste,config = <&gpio_in_pu>;
};
/* VMMCI level-shifter enable */
snowball_cfg3 {
pins = "GPIO217_AH12";
ste,config = <&gpio_out_lo>;
};
/* VMMCI level-shifter voltage select */
snowball_cfg4 {
pins = "GPIO228_AJ6";
ste,config = <&gpio_out_hi>;
};
};
};
ssp0 {
......
......@@ -291,8 +291,6 @@ void __init imx_gpc_check_dt(void)
}
}
#ifdef CONFIG_PM_GENERIC_DOMAINS
static void _imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
{
int iso, iso2sw;
......@@ -399,7 +397,6 @@ static struct genpd_onecell_data imx_gpc_onecell_data = {
static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
{
struct clk *clk;
bool is_off;
int i;
imx6q_pu_domain.reg = pu_reg;
......@@ -416,18 +413,13 @@ static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
}
imx6q_pu_domain.num_clks = i;
is_off = IS_ENABLED(CONFIG_PM);
if (is_off) {
_imx6q_pm_pu_power_off(&imx6q_pu_domain.base);
} else {
/*
* Enable power if compiled without CONFIG_PM in case the
* bootloader disabled it.
*/
/* Enable power always in case bootloader disabled it. */
imx6q_pm_pu_power_on(&imx6q_pu_domain.base);
}
pm_genpd_init(&imx6q_pu_domain.base, NULL, is_off);
if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS))
return 0;
pm_genpd_init(&imx6q_pu_domain.base, NULL, false);
return of_genpd_add_provider_onecell(dev->of_node,
&imx_gpc_onecell_data);
......@@ -437,13 +429,6 @@ static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
return -EINVAL;
}
#else
static inline int imx_gpc_genpd_init(struct device *dev, struct regulator *reg)
{
return 0;
}
#endif /* CONFIG_PM_GENERIC_DOMAINS */
static int imx_gpc_probe(struct platform_device *pdev)
{
struct regulator *pu_reg;
......
......@@ -60,6 +60,7 @@ config SOC_AM43XX
select ARM_GIC
select MACH_OMAP_GENERIC
select MIGHT_HAVE_CACHE_L2X0
select HAVE_ARM_SCU
config SOC_DRA7XX
bool "TI DRA7XX"
......
......@@ -24,6 +24,7 @@
#include <linux/ata_platform.h>
#include <linux/serial_8250.h>
#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -144,6 +145,8 @@ static void __init capc7117_init(void)
capc7117_uarts_init();
capc7117_ide_init();
regulator_has_full_constraints();
}
MACHINE_START(CAPC7117,
......
......@@ -13,6 +13,7 @@
#include <linux/syscore_ops.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <linux/dm9000.h>
#include <linux/leds.h>
......@@ -466,6 +467,8 @@ static void __init cmx2xx_init(void)
cmx2xx_init_ac97();
cmx2xx_init_touchscreen();
cmx2xx_init_leds();
regulator_has_full_constraints();
}
static void __init cmx2xx_init_irq(void)
......
......@@ -835,6 +835,8 @@ static void __init cm_x300_init(void)
cm_x300_init_ac97();
cm_x300_init_wi2wi();
cm_x300_init_bl();
regulator_has_full_constraints();
}
static void __init cm_x300_fixup(struct tag *tags, char **cmdline)
......
......@@ -18,6 +18,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/regulator/machine.h>
#include <linux/ucb1400.h>
#include <asm/mach/arch.h>
......@@ -294,6 +295,8 @@ static void __init colibri_pxa270_init(void)
printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
colibri_pxa270_baseboard);
}
regulator_has_full_constraints();
}
/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
......
......@@ -1306,6 +1306,8 @@ static void __init em_x270_init(void)
em_x270_init_i2c();
em_x270_init_camera();
em_x270_userspace_consumers_init();
regulator_has_full_constraints();
}
MACHINE_START(EM_X270, "Compulab EM-X270")
......
......@@ -26,6 +26,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/can/platform/mcp251x.h>
#include <linux/regulator/machine.h>
#include "generic.h"
......@@ -185,6 +186,8 @@ static void __init icontrol_init(void)
mxm_8x10_mmc_init();
icontrol_can_init();
regulator_has_full_constraints();
}
MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
......
......@@ -26,6 +26,7 @@
#include <linux/dm9000.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/pxa-i2c.h>
#include <asm/types.h>
......@@ -534,6 +535,8 @@ static void __init trizeps4_init(void)
BCR_writew(trizeps_conxs_bcr);
board_backlight_power(1);
regulator_has_full_constraints();
}
static void __init trizeps4_map_io(void)
......
......@@ -24,6 +24,7 @@
#include <linux/dm9000.h>
#include <linux/ucb1400.h>
#include <linux/ata_platform.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/max1586.h>
#include <linux/i2c/pxa-i2c.h>
......@@ -711,6 +712,8 @@ static void __init vpac270_init(void)
vpac270_ts_init();
vpac270_rtc_init();
vpac270_ide_init();
regulator_has_full_constraints();
}
MACHINE_START(VPAC270, "Voipac PXA270")
......
......@@ -868,6 +868,8 @@ static void __init zeus_init(void)
i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info);
spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info));
regulator_has_full_constraints();
}
static struct map_desc zeus_io_desc[] __initdata = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment