Commit 11162747 authored by Leonard Crestez's avatar Leonard Crestez Committed by Greg Kroah-Hartman

ARM: dts: imx6sx-sdb: Remove OPP override

commit d8581c7c upstream.

The board file for imx6sx-sdb overrides cpufreq operating points to use
higher voltages. This is done because the board has a shared rail for
VDD_ARM_IN and VDD_SOC_IN and when using LDO bypass the shared voltage
needs to be a value suitable for both ARM and SOC.

This only applies to LDO bypass mode, a feature not present in upstream.
When LDOs are enabled the effect is to use higher voltages than necessary
for no good reason.

Setting these higher voltages can make some boards fail to boot with ugly
semi-random crashes reminiscent of memory corruption. These failures only
happen on board rev. C, rev. B is reported to still work.
Signed-off-by: default avatarLeonard Crestez <leonard.crestez@nxp.com>
Fixes: 54183bd7 ("ARM: imx6sx-sdb: add revb board and make it default")
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 8539c6b5
......@@ -12,23 +12,6 @@ / {
model = "Freescale i.MX6 SoloX SDB RevB Board";
};
&cpu0 {
operating-points = <
/* kHz uV */
996000 1250000
792000 1175000
396000 1175000
198000 1175000
>;
fsl,soc-operating-points = <
/* ARM kHz SOC uV */
996000 1250000
792000 1175000
396000 1175000
198000 1175000
>;
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment