NET: PHY: adds driver for Intel XWAY PHY

This adds support for the Intel (former Lantiq) XWAY 11G and 22E PHYs.
These PHYs are also named PEF 7061, PEF 7071, PEF 7072.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/Kconfig

@@ -271,6 +271,14 @@ config MDIO_BCM_IPROC
 	  This module provides a driver for the MDIO busses found in the
 	  Broadcom iProc SoC's.
 
+config INTEL_XWAY_PHY
+	tristate "Driver for Intel XWAY PHYs"
+	---help---
+	  Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.
+	  These PHYs are marked as standalone chips under the names
+	  PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
+	  SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.
+
 endif # PHYLIB
 
 config MICREL_KS8995MA

drivers/net/phy/Makefile

@@ -44,3 +44,4 @@ obj-$(CONFIG_MDIO_MOXART)	+= mdio-moxart.o
 obj-$(CONFIG_MDIO_BCM_UNIMAC)	+= mdio-bcm-unimac.o
 obj-$(CONFIG_MICROCHIP_PHY)	+= microchip.o
 obj-$(CONFIG_MDIO_BCM_IPROC)	+= mdio-bcm-iproc.o
+obj-$(CONFIG_INTEL_XWAY_PHY)	+= intel-xway.o

drivers/net/phy/intel-xway.c

+/*
+ * Copyright (C) 2012 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
+ * Copyright (C) 2016 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mdio.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/of.h>
+
+#define XWAY_MDIO_IMASK			0x19	/* interrupt mask */
+#define XWAY_MDIO_ISTAT			0x1A	/* interrupt status */
+
+#define XWAY_MDIO_INIT_WOL		BIT(15)	/* Wake-On-LAN */
+#define XWAY_MDIO_INIT_MSRE		BIT(14)
+#define XWAY_MDIO_INIT_NPRX		BIT(13)
+#define XWAY_MDIO_INIT_NPTX		BIT(12)
+#define XWAY_MDIO_INIT_ANE		BIT(11)	/* Auto-Neg error */
+#define XWAY_MDIO_INIT_ANC		BIT(10)	/* Auto-Neg complete */
+#define XWAY_MDIO_INIT_ADSC		BIT(5)	/* Link auto-downspeed detect */
+#define XWAY_MDIO_INIT_MPIPC		BIT(4)
+#define XWAY_MDIO_INIT_MDIXC		BIT(3)
+#define XWAY_MDIO_INIT_DXMC		BIT(2)	/* Duplex mode change */
+#define XWAY_MDIO_INIT_LSPC		BIT(1)	/* Link speed change */
+#define XWAY_MDIO_INIT_LSTC		BIT(0)	/* Link state change */
+#define XWAY_MDIO_INIT_MASK		(XWAY_MDIO_INIT_LSTC | \
+					 XWAY_MDIO_INIT_ADSC)
+
+#define ADVERTISED_MPD			BIT(10)	/* Multi-port device */
+
+/* LED Configuration */
+#define XWAY_MMD_LEDCH			0x01E0
+/* Inverse of SCAN Function */
+#define  XWAY_MMD_LEDCH_NACS_NONE	0x0000
+#define  XWAY_MMD_LEDCH_NACS_LINK	0x0001
+#define  XWAY_MMD_LEDCH_NACS_PDOWN	0x0002
+#define  XWAY_MMD_LEDCH_NACS_EEE	0x0003
+#define  XWAY_MMD_LEDCH_NACS_ANEG	0x0004
+#define  XWAY_MMD_LEDCH_NACS_ABIST	0x0005
+#define  XWAY_MMD_LEDCH_NACS_CDIAG	0x0006
+#define  XWAY_MMD_LEDCH_NACS_TEST	0x0007
+/* Slow Blink Frequency */
+#define  XWAY_MMD_LEDCH_SBF_F02HZ	0x0000
+#define  XWAY_MMD_LEDCH_SBF_F04HZ	0x0010
+#define  XWAY_MMD_LEDCH_SBF_F08HZ	0x0020
+#define  XWAY_MMD_LEDCH_SBF_F16HZ	0x0030
+/* Fast Blink Frequency */
+#define  XWAY_MMD_LEDCH_FBF_F02HZ	0x0000
+#define  XWAY_MMD_LEDCH_FBF_F04HZ	0x0040
+#define  XWAY_MMD_LEDCH_FBF_F08HZ	0x0080
+#define  XWAY_MMD_LEDCH_FBF_F16HZ	0x00C0
+/* LED Configuration */
+#define XWAY_MMD_LEDCL			0x01E1
+/* Complex Blinking Configuration */
+#define  XWAY_MMD_LEDCH_CBLINK_NONE	0x0000
+#define  XWAY_MMD_LEDCH_CBLINK_LINK	0x0001
+#define  XWAY_MMD_LEDCH_CBLINK_PDOWN	0x0002
+#define  XWAY_MMD_LEDCH_CBLINK_EEE	0x0003
+#define  XWAY_MMD_LEDCH_CBLINK_ANEG	0x0004
+#define  XWAY_MMD_LEDCH_CBLINK_ABIST	0x0005
+#define  XWAY_MMD_LEDCH_CBLINK_CDIAG	0x0006
+#define  XWAY_MMD_LEDCH_CBLINK_TEST	0x0007
+/* Complex SCAN Configuration */
+#define  XWAY_MMD_LEDCH_SCAN_NONE	0x0000
+#define  XWAY_MMD_LEDCH_SCAN_LINK	0x0010
+#define  XWAY_MMD_LEDCH_SCAN_PDOWN	0x0020
+#define  XWAY_MMD_LEDCH_SCAN_EEE	0x0030
+#define  XWAY_MMD_LEDCH_SCAN_ANEG	0x0040
+#define  XWAY_MMD_LEDCH_SCAN_ABIST	0x0050
+#define  XWAY_MMD_LEDCH_SCAN_CDIAG	0x0060
+#define  XWAY_MMD_LEDCH_SCAN_TEST	0x0070
+/* Configuration for LED Pin x */
+#define XWAY_MMD_LED0H			0x01E2
+/* Fast Blinking Configuration */
+#define  XWAY_MMD_LEDxH_BLINKF_MASK	0x000F
+#define  XWAY_MMD_LEDxH_BLINKF_NONE	0x0000
+#define  XWAY_MMD_LEDxH_BLINKF_LINK10	0x0001
+#define  XWAY_MMD_LEDxH_BLINKF_LINK100	0x0002
+#define  XWAY_MMD_LEDxH_BLINKF_LINK10X	0x0003
+#define  XWAY_MMD_LEDxH_BLINKF_LINK1000	0x0004
+#define  XWAY_MMD_LEDxH_BLINKF_LINK10_0	0x0005
+#define  XWAY_MMD_LEDxH_BLINKF_LINK100X	0x0006
+#define  XWAY_MMD_LEDxH_BLINKF_LINK10XX	0x0007
+#define  XWAY_MMD_LEDxH_BLINKF_PDOWN	0x0008
+#define  XWAY_MMD_LEDxH_BLINKF_EEE	0x0009
+#define  XWAY_MMD_LEDxH_BLINKF_ANEG	0x000A
+#define  XWAY_MMD_LEDxH_BLINKF_ABIST	0x000B
+#define  XWAY_MMD_LEDxH_BLINKF_CDIAG	0x000C
+/* Constant On Configuration */
+#define  XWAY_MMD_LEDxH_CON_MASK	0x00F0
+#define  XWAY_MMD_LEDxH_CON_NONE	0x0000
+#define  XWAY_MMD_LEDxH_CON_LINK10	0x0010
+#define  XWAY_MMD_LEDxH_CON_LINK100	0x0020
+#define  XWAY_MMD_LEDxH_CON_LINK10X	0x0030
+#define  XWAY_MMD_LEDxH_CON_LINK1000	0x0040
+#define  XWAY_MMD_LEDxH_CON_LINK10_0	0x0050
+#define  XWAY_MMD_LEDxH_CON_LINK100X	0x0060
+#define  XWAY_MMD_LEDxH_CON_LINK10XX	0x0070
+#define  XWAY_MMD_LEDxH_CON_PDOWN	0x0080
+#define  XWAY_MMD_LEDxH_CON_EEE		0x0090
+#define  XWAY_MMD_LEDxH_CON_ANEG	0x00A0
+#define  XWAY_MMD_LEDxH_CON_ABIST	0x00B0
+#define  XWAY_MMD_LEDxH_CON_CDIAG	0x00C0
+#define  XWAY_MMD_LEDxH_CON_COPPER	0x00D0
+#define  XWAY_MMD_LEDxH_CON_FIBER	0x00E0
+/* Configuration for LED Pin x */
+#define XWAY_MMD_LED0L			0x01E3
+/* Pulsing Configuration */
+#define  XWAY_MMD_LEDxL_PULSE_MASK	0x000F
+#define  XWAY_MMD_LEDxL_PULSE_NONE	0x0000
+#define  XWAY_MMD_LEDxL_PULSE_TXACT	0x0001
+#define  XWAY_MMD_LEDxL_PULSE_RXACT	0x0002
+#define  XWAY_MMD_LEDxL_PULSE_COL	0x0004
+/* Slow Blinking Configuration */
+#define  XWAY_MMD_LEDxL_BLINKS_MASK	0x00F0
+#define  XWAY_MMD_LEDxL_BLINKS_NONE	0x0000
+#define  XWAY_MMD_LEDxL_BLINKS_LINK10	0x0010
+#define  XWAY_MMD_LEDxL_BLINKS_LINK100	0x0020
+#define  XWAY_MMD_LEDxL_BLINKS_LINK10X	0x0030
+#define  XWAY_MMD_LEDxL_BLINKS_LINK1000	0x0040
+#define  XWAY_MMD_LEDxL_BLINKS_LINK10_0	0x0050
+#define  XWAY_MMD_LEDxL_BLINKS_LINK100X	0x0060
+#define  XWAY_MMD_LEDxL_BLINKS_LINK10XX	0x0070
+#define  XWAY_MMD_LEDxL_BLINKS_PDOWN	0x0080
+#define  XWAY_MMD_LEDxL_BLINKS_EEE	0x0090
+#define  XWAY_MMD_LEDxL_BLINKS_ANEG	0x00A0
+#define  XWAY_MMD_LEDxL_BLINKS_ABIST	0x00B0
+#define  XWAY_MMD_LEDxL_BLINKS_CDIAG	0x00C0
+#define XWAY_MMD_LED1H			0x01E4
+#define XWAY_MMD_LED1L			0x01E5
+#define XWAY_MMD_LED2H			0x01E6
+#define XWAY_MMD_LED2L			0x01E7
+#define XWAY_MMD_LED3H			0x01E8
+#define XWAY_MMD_LED3L			0x01E9
+
+#define PHY_ID_PHY11G_1_3		0x030260D1
+#define PHY_ID_PHY22F_1_3		0x030260E1
+#define PHY_ID_PHY11G_1_4		0xD565A400
+#define PHY_ID_PHY22F_1_4		0xD565A410
+#define PHY_ID_PHY11G_1_5		0xD565A401
+#define PHY_ID_PHY22F_1_5		0xD565A411
+#define PHY_ID_PHY11G_VR9		0xD565A409
+#define PHY_ID_PHY22F_VR9		0xD565A419
+
+static int xway_gphy_config_init(struct phy_device *phydev)
+{
+	int err;
+	u32 ledxh;
+	u32 ledxl;
+
+	/* Mask all interrupts */
+	err = phy_write(phydev, XWAY_MDIO_IMASK, 0);
+	if (err)
+		return err;
+
+	/* Clear all pending interrupts */
+	phy_read(phydev, XWAY_MDIO_ISTAT);
+
+	phy_write_mmd_indirect(phydev, XWAY_MMD_LEDCH, MDIO_MMD_VEND2,
+			       XWAY_MMD_LEDCH_NACS_NONE |
+			       XWAY_MMD_LEDCH_SBF_F02HZ |
+			       XWAY_MMD_LEDCH_FBF_F16HZ);
+	phy_write_mmd_indirect(phydev, XWAY_MMD_LEDCL, MDIO_MMD_VEND2,
+			       XWAY_MMD_LEDCH_CBLINK_NONE |
+			       XWAY_MMD_LEDCH_SCAN_NONE);
+
+	/**
+	 * In most cases only one LED is connected to this phy, so
+	 * configure them all to constant on and pulse mode. LED3 is
+	 * only available in some packages, leave it in its reset
+	 * configuration.
+	 */
+	ledxh = XWAY_MMD_LEDxH_BLINKF_NONE | XWAY_MMD_LEDxH_CON_LINK10XX;
+	ledxl = XWAY_MMD_LEDxL_PULSE_TXACT | XWAY_MMD_LEDxL_PULSE_RXACT |
+		XWAY_MMD_LEDxL_BLINKS_NONE;
+	phy_write_mmd_indirect(phydev, XWAY_MMD_LED0H, MDIO_MMD_VEND2, ledxh);
+	phy_write_mmd_indirect(phydev, XWAY_MMD_LED0L, MDIO_MMD_VEND2, ledxl);
+	phy_write_mmd_indirect(phydev, XWAY_MMD_LED1H, MDIO_MMD_VEND2, ledxh);
+	phy_write_mmd_indirect(phydev, XWAY_MMD_LED1L, MDIO_MMD_VEND2, ledxl);
+	phy_write_mmd_indirect(phydev, XWAY_MMD_LED2H, MDIO_MMD_VEND2, ledxh);
+	phy_write_mmd_indirect(phydev, XWAY_MMD_LED2L, MDIO_MMD_VEND2, ledxl);
+
+	return 0;
+}
+
+static int xway_gphy14_config_aneg(struct phy_device *phydev)
+{
+	int reg, err;
+
+	/* Advertise as multi-port device, see IEEE802.3-2002 40.5.1.1 */
+	/* This is a workaround for an errata in rev < 1.5 devices */
+	reg = phy_read(phydev, MII_CTRL1000);
+	reg |= ADVERTISED_MPD;
+	err = phy_write(phydev, MII_CTRL1000, reg);
+	if (err)
+		return err;
+
+	return genphy_config_aneg(phydev);
+}
+
+static int xway_gphy_ack_interrupt(struct phy_device *phydev)
+{
+	int reg;
+
+	reg = phy_read(phydev, XWAY_MDIO_ISTAT);
+	return (reg < 0) ? reg : 0;
+}
+
+static int xway_gphy_did_interrupt(struct phy_device *phydev)
+{
+	int reg;
+
+	reg = phy_read(phydev, XWAY_MDIO_ISTAT);
+	return reg & XWAY_MDIO_INIT_MASK;
+}
+
+static int xway_gphy_config_intr(struct phy_device *phydev)
+{
+	u16 mask = 0;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		mask = XWAY_MDIO_INIT_MASK;
+
+	return phy_write(phydev, XWAY_MDIO_IMASK, mask);
+}
+
+static struct phy_driver xway_gphy[] = {
+	{
+		.phy_id		= PHY_ID_PHY11G_1_3,
+		.phy_id_mask	= 0xffffffff,
+		.name		= "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.3",
+		.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause |
+				   SUPPORTED_Asym_Pause),
+		.flags		= PHY_HAS_INTERRUPT,
+		.config_init	= xway_gphy_config_init,
+		.config_aneg	= xway_gphy14_config_aneg,
+		.read_status	= genphy_read_status,
+		.ack_interrupt	= xway_gphy_ack_interrupt,
+		.did_interrupt	= xway_gphy_did_interrupt,
+		.config_intr	= xway_gphy_config_intr,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+	}, {
+		.phy_id		= PHY_ID_PHY22F_1_3,
+		.phy_id_mask	= 0xffffffff,
+		.name		= "Intel XWAY PHY22F (PEF 7061) v1.3",
+		.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
+				   SUPPORTED_Asym_Pause),
+		.flags		= PHY_HAS_INTERRUPT,
+		.config_init	= xway_gphy_config_init,
+		.config_aneg	= xway_gphy14_config_aneg,
+		.read_status	= genphy_read_status,
+		.ack_interrupt	= xway_gphy_ack_interrupt,
+		.did_interrupt	= xway_gphy_did_interrupt,
+		.config_intr	= xway_gphy_config_intr,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+	}, {
+		.phy_id		= PHY_ID_PHY11G_1_4,
+		.phy_id_mask	= 0xffffffff,
+		.name		= "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4",
+		.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause |
+				   SUPPORTED_Asym_Pause),
+		.flags		= PHY_HAS_INTERRUPT,
+		.config_init	= xway_gphy_config_init,
+		.config_aneg	= xway_gphy14_config_aneg,
+		.read_status	= genphy_read_status,
+		.ack_interrupt	= xway_gphy_ack_interrupt,
+		.did_interrupt	= xway_gphy_did_interrupt,
+		.config_intr	= xway_gphy_config_intr,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+	}, {
+		.phy_id		= PHY_ID_PHY22F_1_4,
+		.phy_id_mask	= 0xffffffff,
+		.name		= "Intel XWAY PHY22F (PEF 7061) v1.4",
+		.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
+				   SUPPORTED_Asym_Pause),
+		.flags		= PHY_HAS_INTERRUPT,
+		.config_init	= xway_gphy_config_init,
+		.config_aneg	= xway_gphy14_config_aneg,
+		.read_status	= genphy_read_status,
+		.ack_interrupt	= xway_gphy_ack_interrupt,
+		.did_interrupt	= xway_gphy_did_interrupt,
+		.config_intr	= xway_gphy_config_intr,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+	}, {
+		.phy_id		= PHY_ID_PHY11G_1_5,
+		.phy_id_mask	= 0xffffffff,
+		.name		= "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6",
+		.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause |
+				   SUPPORTED_Asym_Pause),
+		.flags		= PHY_HAS_INTERRUPT,
+		.config_init	= xway_gphy_config_init,
+		.config_aneg	= genphy_config_aneg,
+		.read_status	= genphy_read_status,
+		.ack_interrupt	= xway_gphy_ack_interrupt,
+		.did_interrupt	= xway_gphy_did_interrupt,
+		.config_intr	= xway_gphy_config_intr,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+	}, {
+		.phy_id		= PHY_ID_PHY22F_1_5,
+		.phy_id_mask	= 0xffffffff,
+		.name		= "Intel XWAY PHY22F (PEF 7061) v1.5 / v1.6",
+		.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
+				   SUPPORTED_Asym_Pause),
+		.flags		= PHY_HAS_INTERRUPT,
+		.config_init	= xway_gphy_config_init,
+		.config_aneg	= genphy_config_aneg,
+		.read_status	= genphy_read_status,
+		.ack_interrupt	= xway_gphy_ack_interrupt,
+		.did_interrupt	= xway_gphy_did_interrupt,
+		.config_intr	= xway_gphy_config_intr,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+	}, {
+		.phy_id		= PHY_ID_PHY11G_VR9,
+		.phy_id_mask	= 0xffffffff,
+		.name		= "Intel XWAY PHY11G (xRX integrated)",
+		.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause |
+				   SUPPORTED_Asym_Pause),
+		.flags		= PHY_HAS_INTERRUPT,
+		.config_init	= xway_gphy_config_init,
+		.config_aneg	= genphy_config_aneg,
+		.read_status	= genphy_read_status,
+		.ack_interrupt	= xway_gphy_ack_interrupt,
+		.did_interrupt	= xway_gphy_did_interrupt,
+		.config_intr	= xway_gphy_config_intr,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+	}, {
+		.phy_id		= PHY_ID_PHY22F_VR9,
+		.phy_id_mask	= 0xffffffff,
+		.name		= "Intel XWAY PHY22F (xRX integrated)",
+		.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
+				   SUPPORTED_Asym_Pause),
+		.flags		= PHY_HAS_INTERRUPT,
+		.config_init	= xway_gphy_config_init,
+		.config_aneg	= genphy_config_aneg,
+		.read_status	= genphy_read_status,
+		.ack_interrupt	= xway_gphy_ack_interrupt,
+		.did_interrupt	= xway_gphy_did_interrupt,
+		.config_intr	= xway_gphy_config_intr,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+	},
+};
+module_phy_driver(xway_gphy);
+
+static struct mdio_device_id __maybe_unused xway_gphy_tbl[] = {
+	{ PHY_ID_PHY11G_1_3, 0xffffffff },
+	{ PHY_ID_PHY22F_1_3, 0xffffffff },
+	{ PHY_ID_PHY11G_1_4, 0xffffffff },
+	{ PHY_ID_PHY22F_1_4, 0xffffffff },
+	{ PHY_ID_PHY11G_1_5, 0xffffffff },
+	{ PHY_ID_PHY22F_1_5, 0xffffffff },
+	{ PHY_ID_PHY11G_VR9, 0xffffffff },
+	{ PHY_ID_PHY22F_VR9, 0xffffffff },
+	{ }
+};
+MODULE_DEVICE_TABLE(mdio, xway_gphy_tbl);
+
+MODULE_DESCRIPTION("Intel XWAY PHY driver");
+MODULE_LICENSE("GPL");