Merge branch 'topic/mv_xor' into for-linus

Documentation/devicetree/bindings/dma/mv-xor.txt

 * Marvell XOR engines
 
 Required properties:
-- compatible: Should be "marvell,orion-xor" or "marvell,armada-380-xor"
+- compatible: Should be one of the following:
+  - "marvell,orion-xor"
+  - "marvell,armada-380-xor"
+  - "marvell,armada-3700-xor".
 - reg: Should contain registers location and length (two sets)
     the first set is the low registers, the second set the high
     registers for the XOR engine.

drivers/dma/Kconfig

@@ -332,7 +332,7 @@ config MPC512X_DMA
 
 config MV_XOR
 	bool "Marvell XOR engine support"
-	depends on PLAT_ORION
+	depends on PLAT_ORION || ARCH_MVEBU || COMPILE_TEST
 	select DMA_ENGINE
 	select DMA_ENGINE_RAID
 	select ASYNC_TX_ENABLE_CHANNEL_SWITCH

drivers/dma/mv_xor.c

@@ -31,6 +31,12 @@
 #include "dmaengine.h"
 #include "mv_xor.h"
 
+enum mv_xor_type {
+	XOR_ORION,
+	XOR_ARMADA_38X,
+	XOR_ARMADA_37XX,
+};
+
 enum mv_xor_mode {
 	XOR_MODE_IN_REG,
 	XOR_MODE_IN_DESC,
@@ -477,7 +483,7 @@ mv_xor_prep_dma_xor(struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src,
 	BUG_ON(len > MV_XOR_MAX_BYTE_COUNT);
 
 	dev_dbg(mv_chan_to_devp(mv_chan),
-		"%s src_cnt: %d len: %u dest %pad flags: %ld\n",
+		"%s src_cnt: %d len: %zu dest %pad flags: %ld\n",
 		__func__, src_cnt, len, &dest, flags);
 
 	sw_desc = mv_chan_alloc_slot(mv_chan);
@@ -933,7 +939,7 @@ static int mv_xor_channel_remove(struct mv_xor_chan *mv_chan)
 static struct mv_xor_chan *
 mv_xor_channel_add(struct mv_xor_device *xordev,
 		   struct platform_device *pdev,
-		   int idx, dma_cap_mask_t cap_mask, int irq, int op_in_desc)
+		   int idx, dma_cap_mask_t cap_mask, int irq)
 {
 	int ret = 0;
 	struct mv_xor_chan *mv_chan;
@@ -945,7 +951,10 @@ mv_xor_channel_add(struct mv_xor_device *xordev,
 
 	mv_chan->idx = idx;
 	mv_chan->irq = irq;
-	mv_chan->op_in_desc = op_in_desc;
+	if (xordev->xor_type == XOR_ORION)
+		mv_chan->op_in_desc = XOR_MODE_IN_REG;
+	else
+		mv_chan->op_in_desc = XOR_MODE_IN_DESC;
 
 	dma_dev = &mv_chan->dmadev;
 
@@ -1085,6 +1094,33 @@ mv_xor_conf_mbus_windows(struct mv_xor_device *xordev,
 	writel(0, base + WINDOW_OVERRIDE_CTRL(1));
 }
 
+static void
+mv_xor_conf_mbus_windows_a3700(struct mv_xor_device *xordev)
+{
+	void __iomem *base = xordev->xor_high_base;
+	u32 win_enable = 0;
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		writel(0, base + WINDOW_BASE(i));
+		writel(0, base + WINDOW_SIZE(i));
+		if (i < 4)
+			writel(0, base + WINDOW_REMAP_HIGH(i));
+	}
+	/*
+	 * For Armada3700 open default 4GB Mbus window. The dram
+	 * related configuration are done at AXIS level.
+	 */
+	writel(0xffff0000, base + WINDOW_SIZE(0));
+	win_enable |= 1;
+	win_enable |= 3 << 16;
+
+	writel(win_enable, base + WINDOW_BAR_ENABLE(0));
+	writel(win_enable, base + WINDOW_BAR_ENABLE(1));
+	writel(0, base + WINDOW_OVERRIDE_CTRL(0));
+	writel(0, base + WINDOW_OVERRIDE_CTRL(1));
+}
+
 /*
  * Since this XOR driver is basically used only for RAID5, we don't
  * need to care about synchronizing ->suspend with DMA activity,
@@ -1129,6 +1165,11 @@ static int mv_xor_resume(struct platform_device *dev)
 			       XOR_INTR_MASK(mv_chan));
 	}
 
+	if (xordev->xor_type == XOR_ARMADA_37XX) {
+		mv_xor_conf_mbus_windows_a3700(xordev);
+		return 0;
+	}
+
 	dram = mv_mbus_dram_info();
 	if (dram)
 		mv_xor_conf_mbus_windows(xordev, dram);
@@ -1137,8 +1178,9 @@ static int mv_xor_resume(struct platform_device *dev)
 }
 
 static const struct of_device_id mv_xor_dt_ids[] = {
-	{ .compatible = "marvell,orion-xor", .data = (void *)XOR_MODE_IN_REG },
-	{ .compatible = "marvell,armada-380-xor", .data = (void *)XOR_MODE_IN_DESC },
+	{ .compatible = "marvell,orion-xor", .data = (void *)XOR_ORION },
+	{ .compatible = "marvell,armada-380-xor", .data = (void *)XOR_ARMADA_38X },
+	{ .compatible = "marvell,armada-3700-xor", .data = (void *)XOR_ARMADA_37XX },
 	{},
 };
 
@@ -1152,7 +1194,6 @@ static int mv_xor_probe(struct platform_device *pdev)
 	struct resource *res;
 	unsigned int max_engines, max_channels;
 	int i, ret;
-	int op_in_desc;
 
 	dev_notice(&pdev->dev, "Marvell shared XOR driver\n");
 
@@ -1180,12 +1221,30 @@ static int mv_xor_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, xordev);
 
+
+	/*
+	 * We need to know which type of XOR device we use before
+	 * setting up. In non-dt case it can only be the legacy one.
+	 */
+	xordev->xor_type = XOR_ORION;
+	if (pdev->dev.of_node) {
+		const struct of_device_id *of_id =
+			of_match_device(mv_xor_dt_ids,
+					&pdev->dev);
+
+		xordev->xor_type = (uintptr_t)of_id->data;
+	}
+
 	/*
 	 * (Re-)program MBUS remapping windows if we are asked to.
 	 */
+	if (xordev->xor_type == XOR_ARMADA_37XX) {
+		mv_xor_conf_mbus_windows_a3700(xordev);
+	} else {
 		dram = mv_mbus_dram_info();
 		if (dram)
 			mv_xor_conf_mbus_windows(xordev, dram);
+	}
 
 	/* Not all platforms can gate the clock, so it is not
 	 * an error if the clock does not exists.
@@ -1199,9 +1258,13 @@ static int mv_xor_probe(struct platform_device *pdev)
 	 * order for async_tx to perform well. So we limit the number
 	 * of engines and channels so that we take into account this
 	 * constraint. Note that we also want to use channels from
-	 * separate engines when possible.
+	 * separate engines when possible.  For dual-CPU Armada 3700
+	 * SoC with single XOR engine allow using its both channels.
 	 */
 	max_engines = num_present_cpus();
+	if (xordev->xor_type == XOR_ARMADA_37XX)
+		max_channels =	num_present_cpus();
+	else
 		max_channels = min_t(unsigned int,
 				     MV_XOR_MAX_CHANNELS,
 				     DIV_ROUND_UP(num_present_cpus(), 2));
@@ -1212,15 +1275,11 @@ static int mv_xor_probe(struct platform_device *pdev)
 	if (pdev->dev.of_node) {
 		struct device_node *np;
 		int i = 0;
-		const struct of_device_id *of_id =
-			of_match_device(mv_xor_dt_ids,
-					&pdev->dev);
 
 		for_each_child_of_node(pdev->dev.of_node, np) {
 			struct mv_xor_chan *chan;
 			dma_cap_mask_t cap_mask;
 			int irq;
-			op_in_desc = (int)of_id->data;
 
 			if (i >= max_channels)
 				continue;
@@ -1237,7 +1296,7 @@ static int mv_xor_probe(struct platform_device *pdev)
 			}
 
 			chan = mv_xor_channel_add(xordev, pdev, i,
-						  cap_mask, irq, op_in_desc);
+						  cap_mask, irq);
 			if (IS_ERR(chan)) {
 				ret = PTR_ERR(chan);
 				irq_dispose_mapping(irq);
@@ -1266,8 +1325,7 @@ static int mv_xor_probe(struct platform_device *pdev)
 			}
 
 			chan = mv_xor_channel_add(xordev, pdev, i,
-						  cd->cap_mask, irq,
-						  XOR_MODE_IN_REG);
+						  cd->cap_mask, irq);
 			if (IS_ERR(chan)) {
 				ret = PTR_ERR(chan);
 				goto err_channel_add;

drivers/dma/mv_xor.h

@@ -85,6 +85,7 @@ struct mv_xor_device {
 	void __iomem	     *xor_high_base;
 	struct clk	     *clk;
 	struct mv_xor_chan   *channels[MV_XOR_MAX_CHANNELS];
+	int		     xor_type;
 };
 
 /**