Skip to content

L
linux
Commit 117102b0 authored by Bill Pemberton's avatar Bill Pemberton Committed by Greg Kroah-Hartman
Browse files
Options

Staging: comedi: Remove UINT and *PUINT typedefs in addi-data 

Signed-off-by: default avatarBill Pemberton <wfp5p@virginia.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 74b894e5
Hide whitespace changes
Inline Side-by-side
Showing with 311 additions and 312 deletions
drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c
View file @ 117102b0
......@@ -1107,7 +1107,7 @@ int i_APCI1710_InsnReadChrono(struct comedi_device * dev, struct comedi_subdevic
case APCI1710_CHRONO_READVALUE:
i_ReturnValue = i_APCI1710_ReadChronoValue(dev,
(unsigned char) CR_AREF(insn->chanspec),
(UINT) insn->unused[0],
(unsigned int) insn->unused[0],
(unsigned char *) & data[0], (PULONG) & data[1]);
break;
......@@ -1118,8 +1118,8 @@ int i_APCI1710_InsnReadChrono(struct comedi_device * dev, struct comedi_subdevic
(PULONG) & data[0],
(unsigned char *) & data[1],
(unsigned char *) & data[2],
(PUINT) & data[3],
(PUINT) & data[4], (PUINT) & data[5]);
(unsigned int *) & data[3],
(unsigned int *) & data[4], (unsigned int *) & data[5]);
break;
case APCI1710_CHRONO_READINTERRUPT:
......@@ -1297,7 +1297,7 @@ int i_APCI1710_GetChronoProgressStatus(struct comedi_device * dev,
| Function Name : _INT_ i_APCI1710_ReadChronoValue |
| (unsigned char_ b_BoardHandle, |
| unsigned char_ b_ModulNbr, |
| UINT_ ui_TimeOut, |
| unsigned int_ ui_TimeOut, |
| unsigned char *_ pb_ChronoStatus, |
| PULONG_ pul_ChronoValue) |
+----------------------------------------------------------------------------+
......@@ -1357,7 +1357,7 @@ int i_APCI1710_GetChronoProgressStatus(struct comedi_device * dev,
int i_APCI1710_ReadChronoValue(struct comedi_device * dev,
unsigned char b_ModulNbr,
UINT ui_TimeOut, unsigned char * pb_ChronoStatus, PULONG pul_ChronoValue)
unsigned int ui_TimeOut, unsigned char * pb_ChronoStatus, PULONG pul_ChronoValue)
{
int i_ReturnValue = 0;
DWORD dw_Status;
......@@ -1587,9 +1587,9 @@ int i_APCI1710_ReadChronoValue(struct comedi_device * dev,
| PULONG_ pul_Hour, |
| unsigned char *_ pb_Minute, |
| unsigned char *_ pb_Second, |
| PUINT_ pui_MilliSecond, |
| PUINT_ pui_MicroSecond, |
| PUINT_ pui_NanoSecond) |
| unsigned int *_ pui_MilliSecond, |
| unsigned int *_ pui_MicroSecond, |
| unsigned int *_ pui_NanoSecond) |
+----------------------------------------------------------------------------+
| Task : Convert the chronometer measured timing |
| (ul_ChronoValue) in to h, mn, s, ms, µs, ns. |
......@@ -1603,11 +1603,11 @@ int i_APCI1710_ReadChronoValue(struct comedi_device * dev,
| Output Parameters : PULONG_ pul_Hour : Chronometer timing hour |
| unsigned char *_ pb_Minute : Chronometer timing minute |
| unsigned char *_ pb_Second : Chronometer timing second |
| PUINT_ pui_MilliSecond : Chronometer timing mini |
| unsigned int *_ pui_MilliSecond : Chronometer timing mini |
| second |
| PUINT_ pui_MicroSecond : Chronometer timing micro |
| unsigned int *_ pui_MicroSecond : Chronometer timing micro |
| second |
| PUINT_ pui_NanoSecond : Chronometer timing nano |
| unsigned int *_ pui_NanoSecond : Chronometer timing nano |
| second |
+----------------------------------------------------------------------------+
| Return Value : 0: No error |
......@@ -1625,7 +1625,7 @@ int i_APCI1710_ConvertChronoValue(struct comedi_device * dev,
PULONG pul_Hour,
unsigned char * pb_Minute,
unsigned char * pb_Second,
PUINT pui_MilliSecond, PUINT pui_MicroSecond, PUINT pui_NanoSecond)
unsigned int * pui_MilliSecond, unsigned int * pui_MicroSecond, unsigned int * pui_NanoSecond)
{
int i_ReturnValue = 0;
double d_Hour;
......@@ -1705,7 +1705,7 @@ int i_APCI1710_ConvertChronoValue(struct comedi_device * dev,
d_MilliSecond = d_Second - *pb_Second;
d_MilliSecond = d_MilliSecond * 1000;
*pui_MilliSecond = (UINT) d_MilliSecond;
*pui_MilliSecond = (unsigned int) d_MilliSecond;
/******************************/
/* Calculate the micro second */
......@@ -1715,7 +1715,7 @@ int i_APCI1710_ConvertChronoValue(struct comedi_device * dev,
d_MilliSecond -
*pui_MilliSecond;
d_MicroSecond = d_MicroSecond * 1000;
*pui_MicroSecond = (UINT) d_MicroSecond;
*pui_MicroSecond = (unsigned int) d_MicroSecond;
/******************************/
/* Calculate the micro second */
......@@ -1725,7 +1725,7 @@ int i_APCI1710_ConvertChronoValue(struct comedi_device * dev,
d_MicroSecond -
*pui_MicroSecond;
d_NanoSecond = d_NanoSecond * 1000;
*pui_NanoSecond = (UINT) d_NanoSecond;
*pui_NanoSecond = (unsigned int) d_NanoSecond;
break;
}
......
drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.h
View file @ 117102b0
......@@ -54,7 +54,7 @@ int i_APCI1710_GetChronoProgressStatus(struct comedi_device *dev,
int i_APCI1710_ReadChronoValue(struct comedi_device *dev,
unsigned char b_ModulNbr,
UINT ui_TimeOut, unsigned char * pb_ChronoStatus,
unsigned int ui_TimeOut, unsigned char * pb_ChronoStatus,
PULONG pul_ChronoValue);
int i_APCI1710_ConvertChronoValue(struct comedi_device *dev,
......@@ -63,8 +63,8 @@ int i_APCI1710_ConvertChronoValue(struct comedi_device *dev,
PULONG pul_Hour,
unsigned char * pb_Minute,
unsigned char * pb_Second,
PUINT pui_MilliSecond, PUINT pui_MicroSecond,
PUINT pui_NanoSecond);
unsigned int * pui_MilliSecond, unsigned int * pui_MicroSecond,
unsigned int * pui_NanoSecond);
/*
* CHRONOMETER DIGITAL INPUT OUTPUT FUNCTION
......
drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.c
View file @ 117102b0
......@@ -78,7 +78,7 @@ struct comedi_insn *insn,unsigned int *data)
int i_APCI1710_InsnConfigINCCPT(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_ConfigType;
unsigned int ui_ConfigType;
int i_ReturnValue = 0;
ui_ConfigType = CR_CHAN(insn->chanspec);
......@@ -119,7 +119,7 @@ int i_APCI1710_InsnConfigINCCPT(struct comedi_device * dev, struct comedi_subdev
case APCI1710_INCCPT_INITCOMPARELOGIC:
i_ReturnValue = i_APCI1710_InitCompareLogic(dev,
CR_AREF(insn->chanspec), (UINT) data[0]);
CR_AREF(insn->chanspec), (unsigned int) data[0]);
break;
case APCI1710_INCCPT_INITFREQUENCYMEASUREMENT:
......@@ -1370,7 +1370,7 @@ int i_APCI1710_InitExternalStrobe(struct comedi_device * dev,
| Function Name : _INT_ i_APCI1710_InitCompareLogic |
| (unsigned char_ b_BoardHandle, |
| unsigned char_ b_ModulNbr, |
| UINT_ ui_CompareValue) |
| unsigned int_ ui_CompareValue) |
+----------------------------------------------------------------------------+
| Task : Set the 32-Bit compare value. At that moment that the |
| incremental counter arrive to the compare value |
......@@ -1379,7 +1379,7 @@ int i_APCI1710_InitExternalStrobe(struct comedi_device * dev,
| Input Parameters : unsigned char_ b_BoardHandle : Handle of board APCI-1710 |
| unsigned char_ b_ModulNbr : Module number to configure |
| (0 to 3) |
| UINT_ ui_CompareValue : 32-Bit compare value |
| unsigned int_ ui_CompareValue : 32-Bit compare value |
+----------------------------------------------------------------------------+
| Output Parameters : -
+----------------------------------------------------------------------------+
......@@ -1392,7 +1392,7 @@ int i_APCI1710_InitExternalStrobe(struct comedi_device * dev,
*/
int i_APCI1710_InitCompareLogic(struct comedi_device * dev,
unsigned char b_ModulNbr, UINT ui_CompareValue)
unsigned char b_ModulNbr, unsigned int ui_CompareValue)
{
int i_ReturnValue = 0;
......@@ -2018,7 +2018,7 @@ struct comedi_insn *insn,unsigned int *data) |
int i_APCI1710_InsnBitsINCCPT(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_BitsType;
unsigned int ui_BitsType;
int i_ReturnValue = 0;
ui_BitsType = CR_CHAN(insn->chanspec);
devpriv->tsk_Current = current; // Save the current process task structure
......@@ -2954,7 +2954,7 @@ struct comedi_insn *insn,unsigned int *data) |
int i_APCI1710_InsnWriteINCCPT(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_WriteType;
unsigned int ui_WriteType;
int i_ReturnValue = 0;
ui_WriteType = CR_CHAN(insn->chanspec);
......@@ -2974,7 +2974,7 @@ int i_APCI1710_InsnWriteINCCPT(struct comedi_device * dev, struct comedi_subdevi
case APCI1710_INCCPT_WRITE16BITCOUNTERVALUE:
i_ReturnValue = i_APCI1710_Write16BitCounterValue(dev,
(unsigned char) CR_AREF(insn->chanspec),
(unsigned char) data[0], (UINT) data[1]);
(unsigned char) data[0], (unsigned int) data[1]);
break;
case APCI1710_INCCPT_WRITE32BITCOUNTERVALUE:
......@@ -3207,7 +3207,7 @@ int i_APCI1710_DisableLatchInterrupt(struct comedi_device * dev, unsigned char b
| (unsigned char_ b_BoardHandle |
| unsigned char_ b_ModulNbr, |
| unsigned char_ b_SelectedCounter, |
| UINT_ ui_WriteValue) |
| unsigned int_ ui_WriteValue) |
+----------------------------------------------------------------------------+
| Task : Write a 16-Bit value (ui_WriteValue) in to the selected|
| 16-Bit counter (b_SelectedCounter) from selected module|
......@@ -3218,7 +3218,7 @@ int i_APCI1710_DisableLatchInterrupt(struct comedi_device * dev, unsigned char b
| (0 to 3) |
| unsigned char_ b_SelectedCounter : Selected 16-Bit counter |
| (0 or 1) |
| UINT_ ui_WriteValue : 16-Bit write value |
| unsigned int_ ui_WriteValue : 16-Bit write value |
+----------------------------------------------------------------------------+
| Output Parameters : - |
+----------------------------------------------------------------------------+
......@@ -3232,7 +3232,7 @@ int i_APCI1710_DisableLatchInterrupt(struct comedi_device * dev, unsigned char b
*/
int i_APCI1710_Write16BitCounterValue(struct comedi_device * dev,
unsigned char b_ModulNbr, unsigned char b_SelectedCounter, UINT ui_WriteValue)
unsigned char b_ModulNbr, unsigned char b_SelectedCounter, unsigned int ui_WriteValue)
{
int i_ReturnValue = 0;
......@@ -4052,7 +4052,7 @@ struct comedi_insn *insn,unsigned int *data) |
int i_APCI1710_InsnReadINCCPT(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_ReadType;
unsigned int ui_ReadType;
int i_ReturnValue = 0;
ui_ReadType = CR_CHAN(insn->chanspec);
......@@ -4075,7 +4075,7 @@ int i_APCI1710_InsnReadINCCPT(struct comedi_device * dev, struct comedi_subdevic
case APCI1710_INCCPT_READ16BITCOUNTERVALUE:
i_ReturnValue = i_APCI1710_Read16BitCounterValue(dev,
(unsigned char) CR_AREF(insn->chanspec),
(unsigned char) CR_RANGE(insn->chanspec), (PUINT) & data[0]);
(unsigned char) CR_RANGE(insn->chanspec), (unsigned int *) & data[0]);
break;
case APCI1710_INCCPT_READ32BITCOUNTERVALUE:
......@@ -4341,7 +4341,7 @@ int i_APCI1710_ReadLatchRegisterValue(struct comedi_device * dev,
| (unsigned char_ b_BoardHandle, |
| unsigned char_ b_ModulNbr, |
| unsigned char_ b_SelectedCounter, |
| PUINT_ pui_CounterValue) |
| unsigned int *_ pui_CounterValue) |
+----------------------------------------------------------------------------+
| Task : Latch the selected 16-Bit counter (b_SelectedCounter) |
| from selected module (b_ModulNbr) in to the first |
......@@ -4353,7 +4353,7 @@ int i_APCI1710_ReadLatchRegisterValue(struct comedi_device * dev,
| unsigned char_ b_SelectedCounter : Selected 16-Bit counter |
| (0 or 1) |
+----------------------------------------------------------------------------+
| Output Parameters : PUINT_ pui_CounterValue : 16-Bit counter value |
| Output Parameters : unsigned int *_ pui_CounterValue : 16-Bit counter value |
+----------------------------------------------------------------------------+
| Return Value : 0: No error |
| -1: The handle parameter of the board is wrong |
......@@ -4365,7 +4365,7 @@ int i_APCI1710_ReadLatchRegisterValue(struct comedi_device * dev,
*/
int i_APCI1710_Read16BitCounterValue(struct comedi_device * dev,
unsigned char b_ModulNbr, unsigned char b_SelectedCounter, PUINT pui_CounterValue)
unsigned char b_ModulNbr, unsigned char b_SelectedCounter, unsigned int * pui_CounterValue)
{
int i_ReturnValue = 0;
DWORD dw_LathchValue = 0;
......@@ -4402,7 +4402,7 @@ int i_APCI1710_Read16BitCounterValue(struct comedi_device * dev,
ui_Address + 4 + (64 * b_ModulNbr));
*pui_CounterValue =
(UINT) ((dw_LathchValue >> (16 *
(unsigned int) ((dw_LathchValue >> (16 *
b_SelectedCounter)) &
0xFFFFU);
} else {
......@@ -5150,7 +5150,7 @@ int i_APCI1710_ReadFrequencyMeasurement(struct comedi_device * dev,
unsigned char * pb_Status, unsigned char * pb_UDStatus, PULONG pul_ReadValue)
{
int i_ReturnValue = 0;
UINT ui_16BitValue;
unsigned int ui_16BitValue;
DWORD dw_StatusReg;
/**************************/
......@@ -5224,7 +5224,7 @@ int i_APCI1710_ReadFrequencyMeasurement(struct comedi_device * dev,
if ((*pul_ReadValue & 0xFFFFU) != 0) {
ui_16BitValue
=
(UINT)
(unsigned int)
*
pul_ReadValue
&
......@@ -5247,7 +5247,7 @@ int i_APCI1710_ReadFrequencyMeasurement(struct comedi_device * dev,
if ((*pul_ReadValue & 0xFFFF0000UL) != 0) {
ui_16BitValue
=
(UINT)
(unsigned int)
(
(*pul_ReadValue
>>
......@@ -5281,7 +5281,7 @@ int i_APCI1710_ReadFrequencyMeasurement(struct comedi_device * dev,
if ((*pul_ReadValue & 0xFFFF0000UL) != 0) {
ui_16BitValue
=
(UINT)
(unsigned int)
(
(*pul_ReadValue
>>
......@@ -5307,7 +5307,7 @@ int i_APCI1710_ReadFrequencyMeasurement(struct comedi_device * dev,
if ((*pul_ReadValue & 0xFFFFU) != 0) {
ui_16BitValue
=
(UINT)
(unsigned int)
*
pul_ReadValue
&
......
drivers/staging/comedi/drivers/addi-data/APCI1710_INCCPT.h
View file @ 117102b0
......@@ -171,7 +171,7 @@ int i_APCI1710_InitExternalStrobe(struct comedi_device *dev,
unsigned char b_ExternalStrobeLevel);
int i_APCI1710_InitCompareLogic(struct comedi_device *dev,
unsigned char b_ModulNbr, UINT ui_CompareValue);
unsigned char b_ModulNbr, unsigned int ui_CompareValue);
int i_APCI1710_InitFrequencyMeasurement(struct comedi_device *dev,
unsigned char b_ModulNbr,
......@@ -207,7 +207,7 @@ int i_APCI1710_DisableLatchInterrupt(struct comedi_device *dev, unsigned char b_
int i_APCI1710_Write16BitCounterValue(struct comedi_device *dev,
unsigned char b_ModulNbr, unsigned char b_SelectedCounter,
UINT ui_WriteValue);
unsigned int ui_WriteValue);
int i_APCI1710_Write32BitCounterValue(struct comedi_device *dev,
unsigned char b_ModulNbr, ULONG ul_WriteValue);
......@@ -238,7 +238,7 @@ int i_APCI1710_ReadLatchRegisterValue(struct comedi_device *dev,
int i_APCI1710_Read16BitCounterValue(struct comedi_device *dev,
unsigned char b_ModulNbr, unsigned char b_SelectedCounter,
PUINT pui_CounterValue);
unsigned int * pui_CounterValue);
int i_APCI1710_Read32BitCounterValue(struct comedi_device *dev,
unsigned char b_ModulNbr, PULONG pul_CounterValue);
......
drivers/staging/comedi/drivers/addi-data/APCI1710_Ssi.c
View file @ 117102b0
......@@ -137,7 +137,7 @@ int i_APCI1710_InsnConfigInitSSI(struct comedi_device * dev, struct comedi_subde
struct comedi_insn * insn, unsigned int * data)
{
int i_ReturnValue = 0;
UINT ui_TimerValue;
unsigned int ui_TimerValue;
unsigned char b_ModulNbr, b_SSIProfile, b_PositionTurnLength, b_TurnCptLength,
b_PCIInputClock, b_SSICountingMode;
ULONG ul_SSIOutputClock;
......@@ -250,7 +250,7 @@ int i_APCI1710_InsnConfigInitSSI(struct comedi_device * dev, struct comedi_subde
ui_TimerValue
=
(UINT)
(unsigned int)
(
((ULONG) (b_PCIInputClock) * 500000UL) / ul_SSIOutputClock);
......
drivers/staging/comedi/drivers/addi-data/APCI1710_Tor.c
View file @ 117102b0
......@@ -857,7 +857,7 @@ int i_APCI1710_InsnConfigInitTorCounter(struct comedi_device * dev,
DPRINTK("Module number error\n");
i_ReturnValue = -2;
}
data[0] = (UINT) ul_RealTimingInterval;
data[0] = (unsigned int) ul_RealTimingInterval;
return (i_ReturnValue);
}
......@@ -1646,7 +1646,7 @@ int i_APCI1710_InsnReadGetTorCounterInitialisation(struct comedi_device * dev,
| (unsigned char_ b_BoardHandle, |
| unsigned char_ b_ModulNbr, |
| unsigned char_ b_TorCounter, |
| UINT_ ui_TimeOut, |
| unsigned int_ ui_TimeOut, |
| unsigned char *_ pb_TorCounterStatus, |
| PULONG_ pul_TorCounterValue) |
+----------------------------------------------------------------------------+
......@@ -1666,7 +1666,7 @@ int i_APCI1710_InsnReadGetTorCounterInitialisation(struct comedi_device * dev,
b_ModulNbr = CR_AREF(insn->chanspec);
b_ReadType = (unsigned char) data[0];
b_TorCounter = (unsigned char) data[1];
ui_TimeOut = (UINT) data[2]; |
ui_TimeOut = (unsigned int) data[2]; |
+----------------------------------------------------------------------------+
| Output Parameters : unsigned char *_ pb_TorCounterStatus : Return the tor counter |
| status. |
......@@ -1710,7 +1710,7 @@ int i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device
unsigned char b_ModulNbr;
unsigned char b_TorCounter;
unsigned char b_ReadType;
UINT ui_TimeOut;
unsigned int ui_TimeOut;
unsigned char * pb_TorCounterStatus;
PULONG pul_TorCounterValue;
......@@ -1718,7 +1718,7 @@ int i_APCI1710_InsnBitsGetTorCounterProgressStatusAndValue(struct comedi_device
b_ModulNbr = CR_AREF(insn->chanspec);
b_ReadType = (unsigned char) data[0];
b_TorCounter = (unsigned char) data[1];
ui_TimeOut = (UINT) data[2];
ui_TimeOut = (unsigned int) data[2];
pb_TorCounterStatus = (unsigned char *) & data[0];
pul_TorCounterValue = (PULONG) & data[1];
......
drivers/staging/comedi/drivers/addi-data/APCI1710_Ttl.c
View file @ 117102b0
......@@ -832,7 +832,7 @@ int i_APCI1710_InsnWriteSetTTLIOChlOnOff(struct comedi_device * dev,
DWORD dw_StatusReg = 0;
unsigned char b_ModulNbr;
unsigned char b_OutputChannel;
UINT ui_State;
unsigned int ui_State;
i_ReturnValue = insn->n;
b_ModulNbr = CR_AREF(insn->chanspec);
......
drivers/staging/comedi/drivers/addi-data/addi_common.h
View file @ 117102b0
......@@ -37,7 +37,6 @@
#define SUCCESS 1
/* variable type definition */
typedef unsigned int UINT, *PUINT;
typedef int LONG, *PLONG; /* 32-bit */
typedef unsigned int ULONG, *PULONG; /* 32-bit */
typedef unsigned int DWORD, *PDWORD; /* 32-bit */
......@@ -50,7 +49,7 @@ typedef const struct comedi_lrange *PCRANGE;
#define MAKEWORD(H, L) (unsigned short)((L) | ((H) << 8))
#define LOWORD(W) (unsigned short)((W) & 0xFFFF)
#define HIWORD(W) (unsigned short)(((W) >> 16) & 0xFFFF)
#define MAKEDWORD(H, L) (UINT)((L) | ((H) << 16))
#define MAKEDWORD(H, L) (unsigned int)((L) | ((H) << 16))
#define ADDI_ENABLE 1
#define ADDI_DISABLE 0
......@@ -99,8 +98,8 @@ typedef struct {
int i_Dma; // dma present or not
int i_Timer; // timer subdevice present or not
unsigned char b_AvailableConvertUnit;
UINT ui_MinAcquisitiontimeNs; // Minimum Acquisition in Nano secs
UINT ui_MinDelaytimeNs; // Minimum Delay in Nano secs
unsigned int ui_MinAcquisitiontimeNs; // Minimum Acquisition in Nano secs
unsigned int ui_MinDelaytimeNs; // Minimum Delay in Nano secs
/* interrupt and reset */
void (*v_hwdrv_Interrupt)(int irq, void *d);
......@@ -366,33 +365,33 @@ typedef struct {
unsigned char b_ValidDriver; // driver is ok
unsigned char b_AiContinuous; // we do unlimited AI
unsigned char b_AiInitialisation;
UINT ui_AiActualScan; //how many scans we finished
UINT ui_AiBufferPtr; // data buffer ptr in samples
UINT ui_AiNbrofChannels; // how many channels is measured
UINT ui_AiScanLength; // Length of actual scanlist
UINT ui_AiActualScanPosition; // position in actual scan
PUINT pui_AiChannelList; // actual chanlist
UINT ui_AiChannelList[32]; // actual chanlist
unsigned int ui_AiActualScan; //how many scans we finished
unsigned int ui_AiBufferPtr; // data buffer ptr in samples
unsigned int ui_AiNbrofChannels; // how many channels is measured
unsigned int ui_AiScanLength; // Length of actual scanlist
unsigned int ui_AiActualScanPosition; // position in actual scan
unsigned int * pui_AiChannelList; // actual chanlist
unsigned int ui_AiChannelList[32]; // actual chanlist
unsigned char b_AiChannelConfiguration[32]; // actual chanlist
UINT ui_AiReadData[32];
unsigned int ui_AiReadData[32];
DWORD dw_AiInitialised;
UINT ui_AiTimer0; //Timer Constant for Timer0
UINT ui_AiTimer1; //Timer constant for Timer1
UINT ui_AiFlags;
UINT ui_AiDataLength;
unsigned int ui_AiTimer0; //Timer Constant for Timer0
unsigned int ui_AiTimer1; //Timer constant for Timer1
unsigned int ui_AiFlags;
unsigned int ui_AiDataLength;
short *AiData; // Pointer to sample data
UINT ui_AiNbrofScans; // number of scans to do
unsigned int ui_AiNbrofScans; // number of scans to do
unsigned short us_UseDma; // To use Dma or not
unsigned char b_DmaDoubleBuffer; // we can use double buffering
UINT ui_DmaActualBuffer; // which buffer is used now
unsigned int ui_DmaActualBuffer; // which buffer is used now
//*UPDATE-0.7.57->0.7.68
//ULONG ul_DmaBufferVirtual[2];// pointers to begin of DMA buffer
short *ul_DmaBufferVirtual[2]; // pointers to begin of DMA buffer
ULONG ul_DmaBufferHw[2]; // hw address of DMA buff
UINT ui_DmaBufferSize[2]; // size of dma buffer in bytes
UINT ui_DmaBufferUsesize[2]; // which size we may now used for transfer
UINT ui_DmaBufferSamples[2]; // size in samples
UINT ui_DmaBufferPages[2]; // number of pages in buffer
unsigned int ui_DmaBufferSize[2]; // size of dma buffer in bytes
unsigned int ui_DmaBufferUsesize[2]; // which size we may now used for transfer
unsigned int ui_DmaBufferSamples[2]; // size in samples
unsigned int ui_DmaBufferPages[2]; // number of pages in buffer
unsigned char b_DigitalOutputRegister; // Digital Output Register
unsigned char b_OutputMemoryStatus;
unsigned char b_AnalogInputChannelNbr; // Analog input channel Nbr
......@@ -408,7 +407,7 @@ typedef struct {
unsigned char b_AiCyclicAcquisition; // indicate cyclic acquisition
unsigned char b_InterruptMode; // eoc eos or dma
unsigned char b_EocEosInterrupt; // Enable disable eoc eos interrupt
UINT ui_EocEosConversionTime;
unsigned int ui_EocEosConversionTime;
unsigned char b_EocEosConversionTimeBase;
unsigned char b_SingelDiff;
unsigned char b_ExttrigEnable; /* To enable or disable external trigger */
......@@ -419,8 +418,8 @@ typedef struct {
/* Hardware board infos for 1710 */
struct {
UINT ui_Address; /* Board address */
UINT ui_FlashAddress;
unsigned int ui_Address; /* Board address */
unsigned int ui_FlashAddress;
unsigned char b_InterruptNbr; /* Board interrupt number */
unsigned char b_SlotNumber; /* PCI slot number */
unsigned char b_BoardVersion;
......@@ -431,8 +430,8 @@ typedef struct {
struct {
ULONG ul_InterruptOccur; /* 0 : No interrupt occur */
/* > 0 : Interrupt occur */
UINT ui_Read; /* Read FIFO */
UINT ui_Write; /* Write FIFO */
unsigned int ui_Read; /* Read FIFO */
unsigned int ui_Write; /* Write FIFO */
struct {
unsigned char b_OldModuleMask;
ULONG ul_OldInterruptMask; /* Interrupt mask */
......
drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
View file @ 117102b0
......@@ -806,7 +806,7 @@ int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress,
char *pc_PCIChipInformation, struct comedi_device *dev)
{
unsigned short w_Temp, i, w_Count = 0;
UINT ui_Temp;
unsigned int ui_Temp;
str_MainHeader s_MainHeader;
str_DigitalInputHeader s_DigitalInputHeader;
str_DigitalOutputHeader s_DigitalOutputHeader;
......@@ -876,10 +876,10 @@ int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress,
s_AnalogInputHeader.w_Nchannel;
this_board->i_Dma = s_AnalogInputHeader.b_HasDma;
this_board->ui_MinAcquisitiontimeNs =
(UINT) s_AnalogInputHeader.w_MinConvertTiming *
(unsigned int) s_AnalogInputHeader.w_MinConvertTiming *
1000;
this_board->ui_MinDelaytimeNs =
(UINT) s_AnalogInputHeader.w_MinDelayTiming *
(unsigned int) s_AnalogInputHeader.w_MinDelayTiming *
1000;
ui_Temp = 0xffff;
this_board->i_AiMaxdata =
......
drivers/staging/comedi/drivers/addi-data/hwdrv_APCI1710.c
View file @ 117102b0
......@@ -255,7 +255,7 @@ void v_APCI1710_Interrupt(int irq, void *d)
unsigned char b_PWMCpt = 0;
unsigned char b_TorCounterCpt = 0;
unsigned char b_PulseIncoderCpt = 0;
UINT ui_16BitValue;
unsigned int ui_16BitValue;
ULONG ul_InterruptLatchReg = 0;
ULONG ul_LatchRegisterValue = 0;
ULONG ul_82X54InterruptStatus;
......@@ -675,7 +675,7 @@ void v_APCI1710_Interrupt(int irq, void *d)
if ((ul_LatchRegisterValue &
0xFFFFU) != 0) {
ui_16BitValue =
(UINT)
(unsigned int)
ul_LatchRegisterValue
& 0xFFFFU;
ul_LatchRegisterValue =
......@@ -693,7 +693,7 @@ void v_APCI1710_Interrupt(int irq, void *d)
0xFFFF0000UL) !=
0) {
ui_16BitValue =
(UINT) (
(unsigned int) (
(ul_LatchRegisterValue
>> 16) &
0xFFFFU);
......@@ -721,7 +721,7 @@ void v_APCI1710_Interrupt(int irq, void *d)
if ((ul_LatchRegisterValue &
0xFFFF0000UL) != 0) {
ui_16BitValue =
(UINT) (
(unsigned int) (
(ul_LatchRegisterValue
>> 16) &
0xFFFFU);
......@@ -741,7 +741,7 @@ void v_APCI1710_Interrupt(int irq, void *d)
if ((ul_LatchRegisterValue & 0xFFFFU) !=
0) {
ui_16BitValue =
(UINT)
(unsigned int)
ul_LatchRegisterValue &
0xFFFFU;
ul_LatchRegisterValue =
......
drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
View file @ 117102b0
......@@ -64,7 +64,7 @@ int i_Flag = 1;
| Task : Configures The Timer , Counter or Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT *data : Data Pointer contains |
| unsigned int *data : Data Pointer contains |
| configuration parameters as below |
| |
| data[0] : 0 Configure As Timer |
......@@ -112,9 +112,9 @@ int i_Flag = 1;
int i_APCI035_ConfigTimerWatchdog(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Status = 0;
UINT ui_Command = 0;
UINT ui_Mode = 0;
unsigned int ui_Status = 0;
unsigned int ui_Command = 0;
unsigned int ui_Mode = 0;
i_Temp = 0;
devpriv->tsk_Current = current;
devpriv->b_TimerSelectMode = data[0];
......@@ -260,7 +260,7 @@ int i_APCI035_ConfigTimerWatchdog(struct comedi_device * dev, struct comedi_subd
| Task : Start / Stop The Selected Timer , or Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT *data : Data Pointer contains |
| unsigned int *data : Data Pointer contains |
| configuration parameters as below |
| |
| data[0] : 0 - Stop Selected Timer/Watchdog |
......@@ -281,7 +281,7 @@ int i_APCI035_ConfigTimerWatchdog(struct comedi_device * dev, struct comedi_subd
int i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device * dev,
struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Command = 0;
unsigned int ui_Command = 0;
int i_Count = 0;
if (data[0] == 1) {
ui_Command =
......@@ -373,7 +373,7 @@ int i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device * dev,
| Task : Read The Selected Timer , Counter or Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT *data : Data Pointer contains |
| unsigned int *data : Data Pointer contains |
| configuration parameters as below |
| |
| |
......@@ -394,7 +394,7 @@ int i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device * dev,
int i_APCI035_ReadTimerWatchdog(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Status = 0; // Status register
unsigned int ui_Status = 0; // Status register
i_WatchdogNbr = insn->unused[0];
/******************/
/* Get the status */
......@@ -472,8 +472,8 @@ int i_APCI035_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subdev
| Task : Read value of the selected channel |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_NoOfChannels : No Of Channels To read |
| UINT *data : Data Pointer to read status |
| unsigned int ui_NoOfChannels : No Of Channels To read |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
| data[0] : Digital Value Of Input |
......@@ -487,7 +487,7 @@ int i_APCI035_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subdev
int i_APCI035_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_CommandRegister = 0;
unsigned int ui_CommandRegister = 0;
/******************/
/* Set the start */
/******************/
......@@ -551,11 +551,11 @@ int i_APCI035_Reset(struct comedi_device * dev)
static void v_APCI035_Interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
UINT ui_StatusRegister1 = 0;
UINT ui_StatusRegister2 = 0;
UINT ui_ReadCommand = 0;
UINT ui_ChannelNumber = 0;
UINT ui_DigitalTemperature = 0;
unsigned int ui_StatusRegister1 = 0;
unsigned int ui_StatusRegister2 = 0;
unsigned int ui_ReadCommand = 0;
unsigned int ui_ChannelNumber = 0;
unsigned int ui_DigitalTemperature = 0;
if (i_Temp == 1) {
i_WatchdogNbr = i_Flag;
i_Flag = i_Flag + 1;
......
drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.h
View file @ 117102b0
......@@ -27,8 +27,8 @@ struct {
int i_Coupling;
int i_SingleDiff;
int i_AutoCalibration;
UINT ui_ReloadValue;
UINT ui_TimeUnitReloadVal;
unsigned int ui_ReloadValue;
unsigned int ui_TimeUnitReloadVal;
int i_Interrupt;
int i_ModuleSelection;
} Config_Parameters_Main;
......
drivers/staging/comedi/drivers/addi-data/hwdrv_apci1032.c
View file @ 117102b0
......@@ -54,7 +54,7 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
#include "hwdrv_apci1032.h"
#include <linux/delay.h>
//Global variables
UINT ui_InterruptStatus = 0;
unsigned int ui_InterruptStatus = 0;
/*
+----------------------------------------------------------------------------+
......@@ -87,7 +87,7 @@ UINT ui_InterruptStatus = 0;
int i_APCI1032_ConfigDigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_TmpValue;
unsigned int ui_TmpValue;
ULONG ul_Command1 = 0;
ULONG ul_Command2 = 0;
......@@ -134,7 +134,7 @@ int i_APCI1032_ConfigDigitalInput(struct comedi_device * dev, struct comedi_subd
| Task : Return the status of the digital input |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_Channel : Channel number to read |
| unsigned int ui_Channel : Channel number to read |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
......@@ -147,11 +147,11 @@ int i_APCI1032_ConfigDigitalInput(struct comedi_device * dev, struct comedi_subd
int i_APCI1032_Read1DigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_TmpValue = 0;
UINT ui_Channel;
unsigned int ui_TmpValue = 0;
unsigned int ui_Channel;
ui_Channel = CR_CHAN(insn->chanspec);
if (ui_Channel >= 0 && ui_Channel <= 31) {
ui_TmpValue = (UINT) inl(devpriv->iobase + APCI1032_DIGITAL_IP);
ui_TmpValue = (unsigned int) inl(devpriv->iobase + APCI1032_DIGITAL_IP);
// since only 1 channel reqd to bring it to last bit it is rotated
// 8 +(chan - 1) times then ANDed with 1 for last bit.
*data = (ui_TmpValue >> ui_Channel) & 0x1;
......@@ -172,8 +172,8 @@ int i_APCI1032_Read1DigitalInput(struct comedi_device * dev, struct comedi_subde
| Task : Return the status of the Requested digital inputs |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_NoOfChannels : No Of Channels To be Read |
| UINT *data : Data Pointer to read status |
| unsigned int ui_NoOfChannels : No Of Channels To be Read |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
......@@ -186,13 +186,13 @@ int i_APCI1032_Read1DigitalInput(struct comedi_device * dev, struct comedi_subde
int i_APCI1032_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_PortValue = data[0];
UINT ui_Mask = 0;
UINT ui_NoOfChannels;
unsigned int ui_PortValue = data[0];
unsigned int ui_Mask = 0;
unsigned int ui_NoOfChannels;
ui_NoOfChannels = CR_CHAN(insn->chanspec);
if (data[1] == 0) {
*data = (UINT) inl(devpriv->iobase + APCI1032_DIGITAL_IP);
*data = (unsigned int) inl(devpriv->iobase + APCI1032_DIGITAL_IP);
switch (ui_NoOfChannels) {
case 2:
ui_Mask = 3;
......@@ -247,7 +247,7 @@ static void v_APCI1032_Interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
UINT ui_Temp;
unsigned int ui_Temp;
//disable the interrupt
ui_Temp = inl(devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);
outl(ui_Temp & APCI1032_DIGITAL_IP_INTERRUPT_DISABLE,
......
drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
View file @ 117102b0
......@@ -506,7 +506,7 @@ int i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
| Task : Allows or disallows a port event |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_Channel : Channel number to read |
| unsigned int ui_Channel : Channel number to read |
| unsigned int *data : Data Pointer to read status |
data[0] :0 Start input event
1 Stop input event
......@@ -774,7 +774,7 @@ int i_APCI1500_StartStopInputEvent(struct comedi_device * dev, struct comedi_sub
| Task : Return the status of the digital input |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_Channel : Channel number to read |
| unsigned int ui_Channel : Channel number to read |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
......@@ -943,8 +943,8 @@ int i_APCI1500_Initialisation(struct comedi_device * dev, struct comedi_subdevic
| Task : Return the status of the Requested digital inputs |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_NoOfChannels : No Of Channels To be Read |
| UINT *data : Data Pointer
| unsigned int ui_NoOfChannels : No Of Channels To be Read |
| unsigned int *data : Data Pointer
data[0] : 0 Read a single channel
1 read a port value
data[1] : port value
......@@ -960,17 +960,17 @@ int i_APCI1500_Initialisation(struct comedi_device * dev, struct comedi_subdevic
int i_APCI1500_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_PortValue = data[1];
UINT ui_Mask = 0;
UINT ui_Channel;
UINT ui_TmpValue = 0;
unsigned int ui_PortValue = data[1];
unsigned int ui_Mask = 0;
unsigned int ui_Channel;
unsigned int ui_TmpValue = 0;
ui_Channel = CR_CHAN(insn->chanspec);
switch (data[0]) {
case 0:
if (ui_Channel >= 0 && ui_Channel <= 15) {
ui_TmpValue =
(UINT) inw(devpriv->i_IobaseAddon +
(unsigned int) inw(devpriv->i_IobaseAddon +
APCI1500_DIGITAL_IP);
*data = (ui_TmpValue >> ui_Channel) & 0x1;
} //if(ui_Channel >= 0 && ui_Channel <=15)
......@@ -981,7 +981,7 @@ int i_APCI1500_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
break;
case 1:
*data = (UINT) inw(devpriv->i_IobaseAddon +
*data = (unsigned int) inw(devpriv->i_IobaseAddon +
APCI1500_DIGITAL_IP);
switch (ui_Channel) {
case 2:
......@@ -1056,8 +1056,8 @@ int i_APCI1500_ConfigDigitalOutputErrorInterrupt(struct comedi_device * dev,
| Task : Writes port value To the selected port |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_NoOfChannels : No Of Channels To Write |
| UINT *data : Data Pointer to read status |
| unsigned int ui_NoOfChannels : No Of Channels To Write |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
......@@ -1070,10 +1070,10 @@ int i_APCI1500_ConfigDigitalOutputErrorInterrupt(struct comedi_device * dev,
int i_APCI1500_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
static UINT ui_Temp = 0;
UINT ui_Temp1;
static unsigned int ui_Temp = 0;
unsigned int ui_Temp1;
UINT ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel
unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel
if (!devpriv->b_OutputMemoryStatus) {
ui_Temp = 0;
......@@ -2404,7 +2404,7 @@ int i_APCI1500_ReadInterruptMask(struct comedi_device * dev, struct comedi_subde
int i_APCI1500_ConfigureInterrupt(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Status;
unsigned int ui_Status;
int i_RegValue;
int i_Constant;
devpriv->tsk_Current = current;
......@@ -2580,7 +2580,7 @@ static void v_APCI1500_Interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
UINT ui_InterruptStatus = 0;
unsigned int ui_InterruptStatus = 0;
int i_RegValue = 0;
i_InterruptMask = 0;
......@@ -2679,7 +2679,7 @@ static void v_APCI1500_Interrupt(int irq, void *d)
/* Reads port B */
/****************/
i_RegValue =
inb((UINT) devpriv->iobase +
inb((unsigned int) devpriv->iobase +
APCI1500_Z8536_PORT_B);
i_RegValue = i_RegValue & 0xC0;
......
drivers/staging/comedi/drivers/addi-data/hwdrv_apci1516.c
View file @ 117102b0
......@@ -76,11 +76,11 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
int i_APCI1516_Read1DigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_TmpValue = 0;
UINT ui_Channel;
unsigned int ui_TmpValue = 0;
unsigned int ui_Channel;
ui_Channel = CR_CHAN(insn->chanspec);
if (ui_Channel >= 0 && ui_Channel <= 7) {
ui_TmpValue = (UINT) inw(devpriv->iobase + APCI1516_DIGITAL_IP);
ui_TmpValue = (unsigned int) inw(devpriv->iobase + APCI1516_DIGITAL_IP);
// since only 1 channel reqd to bring it to last bit it is rotated
// 8 +(chan - 1) times then ANDed with 1 for last bit.
*data = (ui_TmpValue >> ui_Channel) & 0x1;
......@@ -118,13 +118,13 @@ int i_APCI1516_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_PortValue = data[0];
UINT ui_Mask = 0;
UINT ui_NoOfChannels;
unsigned int ui_PortValue = data[0];
unsigned int ui_Mask = 0;
unsigned int ui_NoOfChannels;
ui_NoOfChannels = CR_CHAN(insn->chanspec);
*data = (UINT) inw(devpriv->iobase + APCI1516_DIGITAL_IP);
*data = (unsigned int) inw(devpriv->iobase + APCI1516_DIGITAL_IP);
switch (ui_NoOfChannels) {
case 2:
ui_Mask = 3;
......@@ -202,8 +202,8 @@ int i_APCI1516_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
int i_APCI1516_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Temp, ui_Temp1;
UINT ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel
unsigned int ui_Temp, ui_Temp1;
unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel
printk("EL311003 : @=%x\n", devpriv->iobase + APCI1516_DIGITAL_OP);
......@@ -363,8 +363,8 @@ int i_APCI1516_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Temp;
UINT ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel
unsigned int ui_Temp;
unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel
ui_Temp = data[0];
*data = inw(devpriv->iobase + APCI1516_DIGITAL_OP_RW);
if (ui_Temp == 0) {
......
drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
View file @ 117102b0
......@@ -56,8 +56,8 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
#include "hwdrv_apci1564.h"
//Global variables
UINT ui_InterruptStatus_1564 = 0;
UINT ui_InterruptData, ui_Type;
unsigned int ui_InterruptStatus_1564 = 0;
unsigned int ui_InterruptData, ui_Type;
/*
+----------------------------------------------------------------------------+
......@@ -137,7 +137,7 @@ int i_APCI1564_ConfigDigitalInput(struct comedi_device * dev, struct comedi_subd
| Task : Return the status of the digital input |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_Channel : Channel number to read |
| unsigned int ui_Channel : Channel number to read |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
......@@ -150,13 +150,13 @@ int i_APCI1564_ConfigDigitalInput(struct comedi_device * dev, struct comedi_subd
int i_APCI1564_Read1DigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_TmpValue = 0;
UINT ui_Channel;
unsigned int ui_TmpValue = 0;
unsigned int ui_Channel;
ui_Channel = CR_CHAN(insn->chanspec);
if (ui_Channel >= 0 && ui_Channel <= 31) {
ui_TmpValue =
(UINT) inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP);
(unsigned int) inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP);
// since only 1 channel reqd to bring it to last bit it is rotated
// 8 +(chan - 1) times then ANDed with 1 for last bit.
*data = (ui_TmpValue >> ui_Channel) & 0x1;
......@@ -177,8 +177,8 @@ int i_APCI1564_Read1DigitalInput(struct comedi_device * dev, struct comedi_subde
| Task : Return the status of the Requested digital inputs |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_NoOfChannels : No Of Channels To be Read |
| UINT *data : Data Pointer to read status |
| unsigned int ui_NoOfChannels : No Of Channels To be Read |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
......@@ -190,13 +190,13 @@ int i_APCI1564_Read1DigitalInput(struct comedi_device * dev, struct comedi_subde
int i_APCI1564_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_PortValue = data[0];
UINT ui_Mask = 0;
UINT ui_NoOfChannels;
unsigned int ui_PortValue = data[0];
unsigned int ui_Mask = 0;
unsigned int ui_NoOfChannels;
ui_NoOfChannels = CR_CHAN(insn->chanspec);
if (data[1] == 0) {
*data = (UINT) inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP);
*data = (unsigned int) inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP);
switch (ui_NoOfChannels) {
case 2:
ui_Mask = 3;
......@@ -239,7 +239,7 @@ int i_APCI1564_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
| Task : Configures The Digital Output Subdevice. |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT *data : Data Pointer contains |
| unsigned int *data : Data Pointer contains |
| configuration parameters as below |
| |
| data[1] : 1 Enable VCC Interrupt |
......@@ -302,8 +302,8 @@ int i_APCI1564_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
| Task : Writes port value To the selected port |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_NoOfChannels : No Of Channels To Write |
| UINT *data : Data Pointer to read status |
| unsigned int ui_NoOfChannels : No Of Channels To Write |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
......@@ -315,8 +315,8 @@ int i_APCI1564_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
int i_APCI1564_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Temp, ui_Temp1;
UINT ui_NoOfChannel;
unsigned int ui_Temp, ui_Temp1;
unsigned int ui_NoOfChannel;
ui_NoOfChannel = CR_CHAN(insn->chanspec);
if (devpriv->b_OutputMemoryStatus) {
......@@ -476,8 +476,8 @@ int i_APCI1564_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
| Task : Read value of the selected channel or port |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_NoOfChannels : No Of Channels To read |
| UINT *data : Data Pointer to read status |
| unsigned int ui_NoOfChannels : No Of Channels To read |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
......@@ -489,8 +489,8 @@ int i_APCI1564_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
int i_APCI1564_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Temp;
UINT ui_NoOfChannel;
unsigned int ui_Temp;
unsigned int ui_NoOfChannel;
ui_NoOfChannel = CR_CHAN(insn->chanspec);
ui_Temp = data[0];
......@@ -543,7 +543,7 @@ int i_APCI1564_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde
| Task : Configures The Timer , Counter or Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT *data : Data Pointer contains |
| unsigned int *data : Data Pointer contains |
| configuration parameters as below |
| |
| data[0] : 0 Configure As Timer |
......@@ -701,7 +701,7 @@ int i_APCI1564_ConfigTimerCounterWatchdog(struct comedi_device * dev,
| Task : Start / Stop The Selected Timer , Counter or Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT *data : Data Pointer contains |
| unsigned int *data : Data Pointer contains |
| configuration parameters as below |
| |
| data[0] : 0 Timer |
......@@ -801,7 +801,7 @@ int i_APCI1564_StartStopWriteTimerCounterWatchdog(struct comedi_device * dev,
| Task : Read The Selected Timer , Counter or Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT *data : Data Pointer contains |
| unsigned int *data : Data Pointer contains |
| configuration parameters as below |
| |
......@@ -919,9 +919,9 @@ int i_APCI1564_ReadInterruptStatus(struct comedi_device * dev, struct comedi_sub
static void v_APCI1564_Interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
UINT ui_DO, ui_DI;
UINT ui_Timer;
UINT ui_C1, ui_C2, ui_C3, ui_C4;
unsigned int ui_DO, ui_DI;
unsigned int ui_Timer;
unsigned int ui_C1, ui_C2, ui_C3, ui_C4;
ULONG ul_Command2 = 0;
ui_DI = inl(devpriv->i_IobaseAmcc + APCI1564_DIGITAL_IP +
APCI1564_DIGITAL_IP_IRQ) & 0x01;
......
drivers/staging/comedi/drivers/addi-data/hwdrv_apci2016.c
View file @ 117102b0
......@@ -62,7 +62,7 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
| Task : Configures The Digital Output Subdevice. |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT *data : Data Pointer contains |
| unsigned int *data : Data Pointer contains |
| configuration parameters as below |
| |
| data[0] : 1 Digital Memory On |
......@@ -101,8 +101,8 @@ int i_APCI2016_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
| Task : Writes port value To the selected port |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_NoOfChannels : No Of Channels To Write |
| UINT *data : Data Pointer to read status |
| unsigned int ui_NoOfChannels : No Of Channels To Write |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
......@@ -114,8 +114,8 @@ int i_APCI2016_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
int i_APCI2016_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_NoOfChannel;
UINT ui_Temp, ui_Temp1;
unsigned int ui_NoOfChannel;
unsigned int ui_Temp, ui_Temp1;
ui_NoOfChannel = CR_CHAN(insn->chanspec);
if ((ui_NoOfChannel < 0) || (ui_NoOfChannel > 15)) {
comedi_error(dev,
......@@ -256,8 +256,8 @@ int i_APCI2016_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
| Task : Read value of the selected channel or port |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_NoOfChannels : No Of Channels To read |
| UINT *data : Data Pointer to read status |
| unsigned int ui_NoOfChannels : No Of Channels To read |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
......@@ -269,8 +269,8 @@ int i_APCI2016_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
int i_APCI2016_BitsDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Temp;
UINT ui_NoOfChannel;
unsigned int ui_Temp;
unsigned int ui_NoOfChannel;
ui_NoOfChannel = CR_CHAN(insn->chanspec);
if ((ui_NoOfChannel < 0) || (ui_NoOfChannel > 15)) {
comedi_error(dev,
......
drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c
View file @ 117102b0
......@@ -53,7 +53,7 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
*/
#include "hwdrv_apci2032.h"
UINT ui_InterruptData, ui_Type;
unsigned int ui_InterruptData, ui_Type;
/*
+----------------------------------------------------------------------------+
| Function Name : int i_APCI2032_ConfigDigitalOutput |
......@@ -63,7 +63,7 @@ UINT ui_InterruptData, ui_Type;
| Task : Configures The Digital Output Subdevice. |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT *data : Data Pointer contains |
| unsigned int *data : Data Pointer contains |
| configuration parameters as below |
| |
| data[1] : 1 Enable VCC Interrupt |
......@@ -123,8 +123,8 @@ int i_APCI2032_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
| Task : Writes port value To the selected port |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_NoOfChannels : No Of Channels To Write |
| UINT *data : Data Pointer to read status |
| unsigned int ui_NoOfChannels : No Of Channels To Write |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
......@@ -137,8 +137,8 @@ int i_APCI2032_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
int i_APCI2032_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Temp, ui_Temp1;
UINT ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel
unsigned int ui_Temp, ui_Temp1;
unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel
if (devpriv->b_OutputMemoryStatus) {
ui_Temp = inl(devpriv->iobase + APCI2032_DIGITAL_OP);
......@@ -302,8 +302,8 @@ int i_APCI2032_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
| Task : Read value of the selected channel or port |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_NoOfChannels : No Of Channels To read |
| UINT *data : Data Pointer to read status |
| unsigned int ui_NoOfChannels : No Of Channels To read |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
......@@ -316,8 +316,8 @@ int i_APCI2032_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
int i_APCI2032_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Temp;
UINT ui_NoOfChannel;
unsigned int ui_Temp;
unsigned int ui_NoOfChannel;
ui_NoOfChannel = CR_CHAN(insn->chanspec);
ui_Temp = data[0];
*data = inl(devpriv->iobase + APCI2032_DIGITAL_OP_RW);
......
drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c
View file @ 117102b0
......@@ -76,11 +76,11 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
int i_APCI2200_Read1DigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_TmpValue = 0;
UINT ui_Channel;
unsigned int ui_TmpValue = 0;
unsigned int ui_Channel;
ui_Channel = CR_CHAN(insn->chanspec);
if (ui_Channel >= 0 && ui_Channel <= 7) {
ui_TmpValue = (UINT) inw(devpriv->iobase + APCI2200_DIGITAL_IP);
ui_TmpValue = (unsigned int) inw(devpriv->iobase + APCI2200_DIGITAL_IP);
*data = (ui_TmpValue >> ui_Channel) & 0x1;
} //if(ui_Channel >= 0 && ui_Channel <=7)
else {
......@@ -116,13 +116,13 @@ int i_APCI2200_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_PortValue = data[0];
UINT ui_Mask = 0;
UINT ui_NoOfChannels;
unsigned int ui_PortValue = data[0];
unsigned int ui_Mask = 0;
unsigned int ui_NoOfChannels;
ui_NoOfChannels = CR_CHAN(insn->chanspec);
*data = (UINT) inw(devpriv->iobase + APCI2200_DIGITAL_IP);
*data = (unsigned int) inw(devpriv->iobase + APCI2200_DIGITAL_IP);
switch (ui_NoOfChannels) {
case 2:
ui_Mask = 3;
......@@ -200,8 +200,8 @@ int i_APCI2200_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
int i_APCI2200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Temp, ui_Temp1;
UINT ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel
unsigned int ui_Temp, ui_Temp1;
unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel
if (devpriv->b_OutputMemoryStatus) {
ui_Temp = inw(devpriv->iobase + APCI2200_DIGITAL_OP);
......@@ -358,8 +358,8 @@ int i_APCI2200_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subde
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Temp;
UINT ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel
unsigned int ui_Temp;
unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel
ui_Temp = data[0];
*data = inw(devpriv->iobase + APCI2200_DIGITAL_OP);
if (ui_Temp == 0) {
......
drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
View file @ 117102b0
......@@ -45,7 +45,7 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
*/
#include "hwdrv_apci3120.h"
static UINT ui_Temp = 0;
static unsigned int ui_Temp = 0;
// FUNCTION DEFINITIONS
......@@ -77,7 +77,7 @@ static UINT ui_Temp = 0;
int i_APCI3120_InsnConfigAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT i;
unsigned int i;
if ((data[0] != APCI3120_EOC_MODE) && (data[0] != APCI3120_EOS_MODE))
return -1;
......@@ -373,7 +373,7 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device * dev, struct comedi_sub
i++) {
//Read the result in FIFO and write them in shared memory
us_TmpValue = inw(devpriv->iobase);
data[i] = (UINT) us_TmpValue;
data[i] = (unsigned int) us_TmpValue;
}
devpriv->b_InterruptMode = APCI3120_EOC_MODE; // Restore defaults.
......@@ -711,7 +711,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
struct comedi_subdevice * s)
{
unsigned char b_Tmp;
UINT ui_Tmp, ui_DelayTiming = 0, ui_TimerValue1 = 0, dmalen0 =
unsigned int ui_Tmp, ui_DelayTiming = 0, ui_TimerValue1 = 0, dmalen0 =
0, dmalen1 = 0, ui_TimerValue2 =
0, ui_TimerValue0, ui_ConvertTiming;
unsigned short us_TmpValue;
......@@ -800,21 +800,21 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device * dev,
if((us_TmpValue & 0x00B0)==0x00B0)
{
f_ConvertValue=(((float)ui_ConvertTiming * 0.002) - 2);
ui_TimerValue0=(UINT)f_ConvertValue;
ui_TimerValue0=(unsigned int)f_ConvertValue;
if (mode==2)
{
f_DelayValue = (((float)ui_DelayTiming * 0.00002) - 2);
ui_TimerValue1 = (UINT) f_DelayValue;
ui_TimerValue1 = (unsigned int) f_DelayValue;
}
}
else
{
f_ConvertValue=(((float)ui_ConvertTiming * 0.0012926) - 1);
ui_TimerValue0=(UINT)f_ConvertValue;
ui_TimerValue0=(unsigned int)f_ConvertValue;
if (mode == 2)
{
f_DelayValue = (((float)ui_DelayTiming * 0.000012926) - 1);
ui_TimerValue1 = (UINT) f_DelayValue;
ui_TimerValue1 = (unsigned int) f_DelayValue;
}
}
***********************************************************************************************/
......@@ -1464,7 +1464,7 @@ void v_APCI3120_Interrupt(int irq, void *d)
// Read the AI Value
devpriv->ui_AiReadData[0] =
(UINT) inw(devpriv->iobase + 0);
(unsigned int) inw(devpriv->iobase + 0);
devpriv->b_EocEosInterrupt = APCI3120_DISABLE;
send_sig(SIGIO, devpriv->tsk_Current, 0); // send signal to the sample
} else {
......@@ -1501,7 +1501,7 @@ void v_APCI3120_Interrupt(int irq, void *d)
i++) {
us_TmpValue = inw(devpriv->iobase + 0);
devpriv->ui_AiReadData[i] =
(UINT) us_TmpValue;
(unsigned int) us_TmpValue;
}
devpriv->b_EocEosInterrupt = APCI3120_DISABLE;
devpriv->b_InterruptMode = APCI3120_EOC_MODE;
......@@ -1704,7 +1704,7 @@ void v_APCI3120_InterruptDma(int irq, void *d)
unsigned int next_dma_buf, samplesinbuf;
unsigned long low_word, high_word, var;
UINT ui_Tmp;
unsigned int ui_Tmp;
samplesinbuf =
devpriv->ui_DmaBufferUsesize[devpriv->ui_DmaActualBuffer] -
inl(devpriv->i_IobaseAmcc + AMCC_OP_REG_MWTC);
......@@ -1972,7 +1972,7 @@ int i_APCI3120_InsnConfigTimer(struct comedi_device * dev, struct comedi_subdevi
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Timervalue2;
unsigned int ui_Timervalue2;
unsigned short us_TmpValue;
unsigned char b_Tmp;
......@@ -2123,7 +2123,7 @@ int i_APCI3120_InsnWriteTimer(struct comedi_device * dev, struct comedi_subdevic
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Timervalue2 = 0;
unsigned int ui_Timervalue2 = 0;
unsigned short us_TmpValue;
unsigned char b_Tmp;
......@@ -2336,7 +2336,7 @@ int i_APCI3120_InsnReadTimer(struct comedi_device * dev, struct comedi_subdevice
us_TmpValue_2 = inw(devpriv->iobase + APCI3120_TIMER_VALUE);
// combining both words
data[0] = (UINT) ((us_TmpValue) | ((us_TmpValue_2) << 16));
data[0] = (unsigned int) ((us_TmpValue) | ((us_TmpValue_2) << 16));
} else // Read watch dog status
{
......@@ -2384,13 +2384,13 @@ int i_APCI3120_InsnReadDigitalInput(struct comedi_device *dev,
struct comedi_insn *insn,
unsigned int *data)
{
UINT ui_Chan, ui_TmpValue;
unsigned int ui_Chan, ui_TmpValue;
ui_Chan = CR_CHAN(insn->chanspec); // channel specified
//this_board->i_hwdrv_InsnReadDigitalInput(dev,ui_Chan,data);
if (ui_Chan >= 0 && ui_Chan <= 3) {
ui_TmpValue = (UINT) inw(devpriv->iobase + APCI3120_RD_STATUS);
ui_TmpValue = (unsigned int) inw(devpriv->iobase + APCI3120_RD_STATUS);
// since only 1 channel reqd to bring it to last bit it is rotated
// 8 +(chan - 1) times then ANDed with 1 for last bit.
......@@ -2426,8 +2426,8 @@ int i_APCI3120_InsnReadDigitalInput(struct comedi_device *dev,
int i_APCI3120_InsnBitsDigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_TmpValue;
ui_TmpValue = (UINT) inw(devpriv->iobase + APCI3120_RD_STATUS);
unsigned int ui_TmpValue;
ui_TmpValue = (unsigned int) inw(devpriv->iobase + APCI3120_RD_STATUS);
/***** state of 4 channels in the 11, 10, 9, 8 bits of status reg
rotated right 8 times to bring them to last four bits
ANDed with oxf for value.
......@@ -2567,9 +2567,9 @@ int i_APCI3120_InsnWriteDigitalOutput(struct comedi_device *dev,
unsigned int *data)
{
UINT ui_Temp1;
unsigned int ui_Temp1;
UINT ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel
unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel
if ((data[0] != 0) && (data[0] != 1)) {
comedi_error(dev,
......@@ -2646,7 +2646,7 @@ int i_APCI3120_InsnWriteAnalogOutput(struct comedi_device *dev,
struct comedi_insn *insn,
unsigned int *data)
{
UINT ui_Range, ui_Channel;
unsigned int ui_Range, ui_Channel;
unsigned short us_TmpValue;
ui_Range = CR_RANGE(insn->chanspec);
......
drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h
View file @ 117102b0
......@@ -168,10 +168,10 @@ static const struct comedi_lrange range_apci3120_ao = { 2, {
typedef struct {
unsigned char b_Type; /* EOC or EOS */
unsigned char b_InterruptFlag; /* Interrupt use or not */
UINT ui_ConvertTiming; /* Selection of the convertion time */
unsigned int ui_ConvertTiming; /* Selection of the convertion time */
unsigned char b_NbrOfChannel; /* Number of channel to read */
UINT ui_ChannelList[MAX_ANALOGINPUT_CHANNELS]; /* Number of the channel to be read */
UINT ui_RangeList[MAX_ANALOGINPUT_CHANNELS]; /* Gain of each channel */
unsigned int ui_ChannelList[MAX_ANALOGINPUT_CHANNELS]; /* Number of the channel to be read */
unsigned int ui_RangeList[MAX_ANALOGINPUT_CHANNELS]; /* Gain of each channel */
} str_AnalogReadInformation;
......
drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
View file @ 117102b0
......@@ -82,10 +82,10 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
int i_LastChannel;
int i_Sum=0;
int i_Offset;
UINT ui_Channel_num=0;
unsigned int ui_Channel_num=0;
static int i_Count=0;
int i_Initialised=0;
UINT ui_InterruptChannelValue[96]; //Buffer
unsigned int ui_InterruptChannelValue[96]; //Buffer
*/
str_BoardInfos s_BoardInfos[100]; // 100 will be the max number of boards to be used
//END JK 06.07.04: Management of sevrals boards
......@@ -536,9 +536,9 @@ int i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev,
| Task : Read value of the selected channel or port |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_NoOfChannels : No Of Channels To read for Port
| unsigned int ui_NoOfChannels : No Of Channels To read for Port
Channel Numberfor single channel
| UINT data[0] : 0: Read single channel
| unsigned int data[0] : 0: Read single channel
1: Read port value
data[1] Port number
+----------------------------------------------------------------------------+
......@@ -553,8 +553,8 @@ int i_APCI3200_GetChannelCalibrationValue(struct comedi_device * dev,
int i_APCI3200_ReadDigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Temp = 0;
UINT ui_NoOfChannel = 0;
unsigned int ui_Temp = 0;
unsigned int ui_NoOfChannel = 0;
ui_NoOfChannel = CR_CHAN(insn->chanspec);
ui_Temp = data[0];
*data = inl(devpriv->i_IobaseReserved);
......@@ -656,8 +656,8 @@ int i_APCI3200_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
int i_APCI3200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Temp = 0, ui_Temp1 = 0;
UINT ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel
unsigned int ui_Temp = 0, ui_Temp1 = 0;
unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel
if (devpriv->b_OutputMemoryStatus) {
ui_Temp = inl(devpriv->i_IobaseAddon);
......@@ -752,8 +752,8 @@ int i_APCI3200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
| Task : Read value of the selected channel or port |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_NoOfChannels : No Of Channels To read |
| UINT *data : Data Pointer to read status |
| unsigned int ui_NoOfChannels : No Of Channels To read |
| unsigned int *data : Data Pointer to read status |
data[0] :0 read single channel
1 read port value
data[1] port no
......@@ -769,8 +769,8 @@ int i_APCI3200_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
int i_APCI3200_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Temp;
UINT ui_NoOfChannel;
unsigned int ui_Temp;
unsigned int ui_NoOfChannel;
ui_NoOfChannel = CR_CHAN(insn->chanspec);
ui_Temp = data[0];
*data = inl(devpriv->i_IobaseAddon);
......@@ -878,9 +878,9 @@ int i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde
struct comedi_insn * insn, unsigned int * data)
{
UINT ul_Config = 0, ul_Temp = 0;
UINT ui_ChannelNo = 0;
UINT ui_Dummy = 0;
unsigned int ul_Config = 0, ul_Temp = 0;
unsigned int ui_ChannelNo = 0;
unsigned int ui_Dummy = 0;
int i_err = 0;
//Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
......@@ -1340,8 +1340,8 @@ int i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde
| Task : Read value of the selected channel |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_NoOfChannels : No Of Channels To read |
| UINT *data : Data Pointer to read status |
| unsigned int ui_NoOfChannels : No Of Channels To read |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
| data[0] : Digital Value Of Input |
......@@ -1364,7 +1364,7 @@ int i_APCI3200_ConfigAnalogInput(struct comedi_device * dev, struct comedi_subde
int i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_DummyValue = 0;
unsigned int ui_DummyValue = 0;
int i_ConvertCJCCalibration;
int i = 0;
......@@ -1639,8 +1639,8 @@ int i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi
| Task : Read value of the selected channel |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_NoOfChannel : Channel No to read |
| UINT *data : Data Pointer to read status |
| unsigned int ui_NoOfChannel : Channel No to read |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
| data[0] : Digital Value read |
......@@ -1654,9 +1654,9 @@ int i_APCI3200_ReadAnalogInput(struct comedi_device * dev, struct comedi_subdevi
int i_APCI3200_Read1AnalogInputChannel(struct comedi_device * dev,
struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
{
UINT ui_EOC = 0;
UINT ui_ChannelNo = 0;
UINT ui_CommandRegister = 0;
unsigned int ui_EOC = 0;
unsigned int ui_ChannelNo = 0;
unsigned int ui_CommandRegister = 0;
//BEGIN JK 06.07.04: Management of sevrals boards
//ui_ChannelNo=i_ChannelNo;
......@@ -1765,7 +1765,7 @@ int i_APCI3200_Read1AnalogInputChannel(struct comedi_device * dev,
| Task : Read calibration offset value of the selected channel|
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT *data : Data Pointer to read status |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
| data[0] : Calibration offset Value |
......@@ -1776,10 +1776,10 @@ int i_APCI3200_Read1AnalogInputChannel(struct comedi_device * dev,
| |
+----------------------------------------------------------------------------+
*/
int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * data)
int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, unsigned int * data)
{
UINT ui_Temp = 0, ui_EOC = 0;
UINT ui_CommandRegister = 0;
unsigned int ui_Temp = 0, ui_EOC = 0;
unsigned int ui_CommandRegister = 0;
//BEGIN JK 06.07.04: Management of sevrals boards
//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
......@@ -1901,7 +1901,7 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * dat
| Task : Read calibration gain value of the selected channel |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT *data : Data Pointer to read status |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
| data[0] : Calibration gain Value Of Input |
......@@ -1912,9 +1912,9 @@ int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device * dev, UINT * dat
| |
+----------------------------------------------------------------------------+
*/
int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data)
int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, unsigned int * data)
{
UINT ui_EOC = 0;
unsigned int ui_EOC = 0;
int ui_CommandRegister = 0;
//while (((inl(devpriv->iobase+i_Offset+12)>>19) & 1) != 1);
......@@ -2036,7 +2036,7 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data)
| Task : Read CJC value of the selected channel |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT *data : Data Pointer to read status |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
| data[0] : CJC Value |
......@@ -2050,7 +2050,7 @@ int i_APCI3200_ReadCalibrationGainValue(struct comedi_device * dev, UINT * data)
int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data)
{
UINT ui_EOC = 0;
unsigned int ui_EOC = 0;
int ui_CommandRegister = 0;
/******************************/
......@@ -2156,7 +2156,7 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data)
| Task : Read CJC calibration offset value of the selected channel
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT *data : Data Pointer to read status |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
| data[0] : CJC calibration offset Value
......@@ -2169,7 +2169,7 @@ int i_APCI3200_ReadCJCValue(struct comedi_device * dev, unsigned int * data)
*/
int i_APCI3200_ReadCJCCalOffset(struct comedi_device * dev, unsigned int * data)
{
UINT ui_EOC = 0;
unsigned int ui_EOC = 0;
int ui_CommandRegister = 0;
/*******************************************/
/*Read calibration offset value for the CJC */
......@@ -2271,8 +2271,8 @@ int i_APCI3200_ReadCJCCalOffset(struct comedi_device * dev, unsigned int * data)
| Task : Read CJC calibration gain value
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_NoOfChannels : No Of Channels To read |
| UINT *data : Data Pointer to read status |
| unsigned int ui_NoOfChannels : No Of Channels To read |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
| data[0] : CJC calibration gain value
......@@ -2285,7 +2285,7 @@ int i_APCI3200_ReadCJCCalOffset(struct comedi_device * dev, unsigned int * data)
*/
int i_APCI3200_ReadCJCCalGain(struct comedi_device * dev, unsigned int * data)
{
UINT ui_EOC = 0;
unsigned int ui_EOC = 0;
int ui_CommandRegister = 0;
/*******************************/
/* Set the convert timing unit */
......@@ -2407,7 +2407,7 @@ int i_APCI3200_ReadCJCCalGain(struct comedi_device * dev, unsigned int * data)
int i_APCI3200_InsnBits_AnalogInput_Test(struct comedi_device * dev,
struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Configuration = 0;
unsigned int ui_Configuration = 0;
int i_Temp; //,i_TimeUnit;
//if(i_Initialised==0)
......@@ -2566,10 +2566,10 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
int err = 0;
int tmp; // divisor1,divisor2;
UINT ui_ConvertTime = 0;
UINT ui_ConvertTimeBase = 0;
UINT ui_DelayTime = 0;
UINT ui_DelayTimeBase = 0;
unsigned int ui_ConvertTime = 0;
unsigned int ui_ConvertTimeBase = 0;
unsigned int ui_DelayTime = 0;
unsigned int ui_DelayTimeBase = 0;
int i_Triggermode = 0;
int i_TriggerEdge = 0;
int i_NbrOfChannel = 0;
......@@ -2766,7 +2766,7 @@ int i_APCI3200_CommandTestAnalogInput(struct comedi_device * dev, struct comedi_
int i_APCI3200_StopCyclicAcquisition(struct comedi_device * dev, struct comedi_subdevice * s)
{
UINT ui_Configuration = 0;
unsigned int ui_Configuration = 0;
//i_InterruptFlag=0;
//i_Initialised=0;
//i_Count=0;
......@@ -2817,17 +2817,17 @@ int i_APCI3200_StopCyclicAcquisition(struct comedi_device * dev, struct comedi_s
int i_APCI3200_CommandAnalogInput(struct comedi_device * dev, struct comedi_subdevice * s)
{
struct comedi_cmd *cmd = &s->async->cmd;
UINT ui_Configuration = 0;
unsigned int ui_Configuration = 0;
//INT i_CurrentSource = 0;
UINT ui_Trigger = 0;
UINT ui_TriggerEdge = 0;
UINT ui_Triggermode = 0;
UINT ui_ScanMode = 0;
UINT ui_ConvertTime = 0;
UINT ui_ConvertTimeBase = 0;
UINT ui_DelayTime = 0;
UINT ui_DelayTimeBase = 0;
UINT ui_DelayMode = 0;
unsigned int ui_Trigger = 0;
unsigned int ui_TriggerEdge = 0;
unsigned int ui_Triggermode = 0;
unsigned int ui_ScanMode = 0;
unsigned int ui_ConvertTime = 0;
unsigned int ui_ConvertTimeBase = 0;
unsigned int ui_DelayTime = 0;
unsigned int ui_DelayTimeBase = 0;
unsigned int ui_DelayMode = 0;
//i_FirstChannel=cmd->chanlist[0];
//i_LastChannel=cmd->chanlist[1];
s_BoardInfos[dev->minor].i_FirstChannel = cmd->chanlist[0];
......@@ -3060,13 +3060,13 @@ int i_APCI3200_Reset(struct comedi_device * dev)
void v_APCI3200_Interrupt(int irq, void *d)
{
struct comedi_device *dev = d;
UINT ui_StatusRegister = 0;
UINT ui_ChannelNumber = 0;
unsigned int ui_StatusRegister = 0;
unsigned int ui_ChannelNumber = 0;
int i_CalibrationFlag = 0;
int i_CJCFlag = 0;
UINT ui_DummyValue = 0;
UINT ui_DigitalTemperature = 0;
UINT ui_DigitalInput = 0;
unsigned int ui_DummyValue = 0;
unsigned int ui_DigitalTemperature = 0;
unsigned int ui_DigitalInput = 0;
int i_ConvertCJCCalibration;
//BEGIN JK TEST
......@@ -3501,7 +3501,7 @@ void v_APCI3200_Interrupt(int irq, void *d)
*/
int i_APCI3200_InterruptHandleEos(struct comedi_device * dev)
{
UINT ui_StatusRegister = 0;
unsigned int ui_StatusRegister = 0;
struct comedi_subdevice *s = dev->subdevices + 0;
//BEGIN JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
......@@ -3588,13 +3588,13 @@ int i_APCI3200_InterruptHandleEos(struct comedi_device * dev)
s_BoardInfos[dev->minor].i_Count = -1;
//async->buf_int_count+=(i_LastChannel-i_FirstChannel+4)*sizeof(UINT);
//async->buf_int_count+=(i_LastChannel-i_FirstChannel+4)*sizeof(unsigned int);
//Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
//async->buf_int_count+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(UINT);
//async->buf_int_count+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(unsigned int);
//End JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
//async->buf_int_ptr+=(i_LastChannel-i_FirstChannel+4)*sizeof(UINT);
//async->buf_int_ptr+=(i_LastChannel-i_FirstChannel+4)*sizeof(unsigned int);
//Begin JK 18.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
//async->buf_int_ptr+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(UINT);
//async->buf_int_ptr+=(s_BoardInfos [dev->minor].i_LastChannel-s_BoardInfos [dev->minor].i_FirstChannel+4)*sizeof(unsigned int);
//comedi_eos(dev,s);
// Set the event type (Comedi Buffer End Of Scan)
......
drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.h
View file @ 117102b0
......@@ -27,8 +27,8 @@ struct {
int i_Coupling;
int i_SingleDiff;
int i_AutoCalibration;
UINT ui_ReloadValue;
UINT ui_TimeUnitReloadVal;
unsigned int ui_ReloadValue;
unsigned int ui_TimeUnitReloadVal;
int i_Interrupt;
int i_ModuleSelection;
} Config_Parameters_Module1, Config_Parameters_Module2,
......@@ -132,11 +132,11 @@ typedef struct {
int i_LastChannel;
int i_Sum;
int i_Offset;
UINT ui_Channel_num;
unsigned int ui_Channel_num;
int i_Count;
int i_Initialised;
//UINT ui_InterruptChannelValue[96]; //Buffer
UINT ui_InterruptChannelValue[144]; //Buffer
unsigned int ui_InterruptChannelValue[144]; //Buffer
unsigned char b_StructInitialized;
//Begin JK 19.10.2004: APCI-3200 Driver update 0.7.57 -> 0.7.68
unsigned int ui_ScanValueArray[7 + 12]; // 7 is the maximal number of channels
......@@ -179,8 +179,8 @@ int i_APCI3200_Reset(struct comedi_device *dev);
int i_APCI3200_ReadCJCCalOffset(struct comedi_device *dev, unsigned int *data);
int i_APCI3200_ReadCJCValue(struct comedi_device *dev, unsigned int *data);
int i_APCI3200_ReadCalibrationGainValue(struct comedi_device *dev, UINT *data);
int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device *dev, UINT *data);
int i_APCI3200_ReadCalibrationGainValue(struct comedi_device *dev, unsigned int *data);
int i_APCI3200_ReadCalibrationOffsetValue(struct comedi_device *dev, unsigned int *data);
int i_APCI3200_Read1AnalogInputChannel(struct comedi_device *dev,
struct comedi_subdevice *s, struct comedi_insn *insn,
unsigned int *data);
......
drivers/staging/comedi/drivers/addi-data/hwdrv_apci3501.c
View file @ 117102b0
......@@ -62,8 +62,8 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
| Task : Read value of the selected channel or port |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_NoOfChannels : No Of Channels To read |
| UINT *data : Data Pointer to read status |
| unsigned int ui_NoOfChannels : No Of Channels To read |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
......@@ -76,8 +76,8 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
int i_APCI3501_ReadDigitalInput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Temp;
UINT ui_NoOfChannel;
unsigned int ui_Temp;
unsigned int ui_NoOfChannel;
ui_NoOfChannel = CR_CHAN(insn->chanspec);
ui_Temp = data[0];
*data = inl(devpriv->iobase + APCI3501_DIGITAL_IP);
......@@ -105,7 +105,7 @@ int i_APCI3501_ReadDigitalInput(struct comedi_device * dev, struct comedi_subdev
| Task : Configures The Digital Output Subdevice. |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT *data : Data Pointer contains |
| unsigned int *data : Data Pointer contains |
| configuration parameters as below |
| |
| data[1] : 1 Enable VCC Interrupt |
......@@ -164,8 +164,8 @@ int i_APCI3501_ConfigDigitalOutput(struct comedi_device * dev, struct comedi_sub
int i_APCI3501_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Temp, ui_Temp1;
UINT ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel
unsigned int ui_Temp, ui_Temp1;
unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec); // get the channel
if (devpriv->b_OutputMemoryStatus) {
ui_Temp = inl(devpriv->iobase + APCI3501_DIGITAL_OP);
} //if(devpriv->b_OutputMemoryStatus )
......@@ -238,8 +238,8 @@ int i_APCI3501_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
| Task : Read value of the selected channel or port |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT ui_NoOfChannels : No Of Channels To read |
| UINT *data : Data Pointer to read status |
| unsigned int ui_NoOfChannels : No Of Channels To read |
| unsigned int *data : Data Pointer to read status |
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
......@@ -251,8 +251,8 @@ int i_APCI3501_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
int i_APCI3501_ReadDigitalOutput(struct comedi_device * dev, struct comedi_subdevice * s,
struct comedi_insn * insn, unsigned int * data)
{
UINT ui_Temp;
UINT ui_NoOfChannel;
unsigned int ui_Temp;
unsigned int ui_NoOfChannel;
ui_NoOfChannel = CR_CHAN(insn->chanspec);
ui_Temp = data[0];
......@@ -392,7 +392,7 @@ int i_APCI3501_WriteAnalogOutput(struct comedi_device * dev, struct comedi_subde
| Task : Configures The Timer , Counter or Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT *data : Data Pointer contains |
| unsigned int *data : Data Pointer contains |
| configuration parameters as below |
| |
| data[0] : 0 Configure As Timer |
......@@ -495,7 +495,7 @@ int i_APCI3501_ConfigTimerCounterWatchdog(struct comedi_device * dev,
| Task : Start / Stop The Selected Timer , Counter or Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT *data : Data Pointer contains |
| unsigned int *data : Data Pointer contains |
| configuration parameters as below |
| |
| data[0] : 0 Timer |
......@@ -598,7 +598,7 @@ int i_APCI3501_StartStopWriteTimerCounterWatchdog(struct comedi_device * dev,
| Task : Read The Selected Timer , Counter or Watchdog |
+----------------------------------------------------------------------------+
| Input Parameters : struct comedi_device *dev : Driver handle |
| UINT *data : Data Pointer contains |
| unsigned int *data : Data Pointer contains |
| configuration parameters as below |
| |
| data[0] : 0 Timer |
......
drivers/staging/comedi/drivers/addi-data/hwdrv_apci3xxx.c
View file @ 117102b0
......@@ -186,7 +186,7 @@ int i_APCI3XXX_AnalogInputConfigOperatingMode(struct comedi_device * dev,
devpriv->
ui_EocEosConversionTime
=
(UINT)
(unsigned int)
dw_ReloadValue;
devpriv->
b_EocEosConversionTimeBase
......@@ -635,7 +635,7 @@ void v_APCI3XXX_Interrupt(int irq, void *d)
b_CopyCpt < devpriv->ui_AiNbrofChannels;
b_CopyCpt++) {
devpriv->ui_AiReadData[b_CopyCpt] =
(UINT) readl((void *)(devpriv->
(unsigned int) readl((void *)(devpriv->
dw_AiBase + 28));
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7