Commit 11801e9d authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc-specific updates from Olof Johansson:
 "Most notable here is probably the addition of basic support for the
  BCM2835, an SoC used in some of the Roku 2 players as well as the
  much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren.
  It's still early days on mainline support, with just the basics
  working.  But it has to start somewhere!

  Beyond that there's some conversions of clock infrastructure on tegra
  to common clock, misc updates for several other platforms, and OMAP
  now has its own bus (under drivers/bus) to manage its devices through.

  This branch adds two new directories outside of arch/arm:
  drivers/irqchip for new irq controllers, and drivers/bus for the above
  OMAP bus.  It's expected that some of the other platforms will migrate
  parts of their platforms to those directories over time as well."

Fix up trivial conflicts with the clk infrastructure changes.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits)
  ARM: shmobile: add new __iomem annotation for new code
  ARM: LPC32xx: Support GPI 28
  ARM: LPC32xx: Platform update for devicetree completion of spi-pl022
  ARM: LPC32xx: Board cleanup
  irqchip: fill in empty Kconfig
  ARM: SAMSUNG: Add check for NULL in clock interface
  ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state
  ARM: EXYNOS: Add bus clock for FIMD
  ARM: SAMSUNG: Fix HDMI related warnings
  ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock
  ARM: EXYNOS: Fix incorrect help text
  ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers
  ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move
  MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture
  ARM: bcm2835: instantiate console UART
  ARM: bcm2835: add stub clock driver
  ARM: bcm2835: add system timer
  ARM: bcm2835: add interrupt controller driver
  ARM: add infra-structure for BCM2835 and Raspberry Pi
  ARM: tegra20: add CPU hotplug support
  ...
parents 1a58ddfc b6e3b5c2
Broadcom BCM2835 device tree bindings
-------------------------------------------
Boards with the BCM2835 SoC shall have the following properties:
Required root node property:
compatible = "brcm,bcm2835";
BCM2835 Top-Level ("ARMCTRL") Interrupt Controller
The BCM2835 contains a custom top-level interrupt controller, which supports
72 interrupt sources using a 2-level register scheme. The interrupt
controller, or the HW block containing it, is referred to occasionally
as "armctrl" in the SoC documentation, hence naming of this binding.
Required properties:
- compatible : should be "brcm,bcm2835-armctrl-ic.txt"
- reg : Specifies base physical address and size of the registers.
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value shall be 2.
The 1st cell is the interrupt bank; 0 for interrupts in the "IRQ basic
pending" register, or 1/2 respectively for interrupts in the "IRQ pending
1/2" register.
The 2nd cell contains the interrupt number within the bank. Valid values
are 0..7 for bank 0, and 0..31 for bank 1.
The interrupt sources are as follows:
Bank 0:
0: ARM_TIMER
1: ARM_MAILBOX
2: ARM_DOORBELL_0
3: ARM_DOORBELL_1
4: VPU0_HALTED
5: VPU1_HALTED
6: ILLEGAL_TYPE0
7: ILLEGAL_TYPE1
Bank 1:
0: TIMER0
1: TIMER1
2: TIMER2
3: TIMER3
4: CODEC0
5: CODEC1
6: CODEC2
7: VC_JPEG
8: ISP
9: VC_USB
10: VC_3D
11: TRANSPOSER
12: MULTICORESYNC0
13: MULTICORESYNC1
14: MULTICORESYNC2
15: MULTICORESYNC3
16: DMA0
17: DMA1
18: VC_DMA2
19: VC_DMA3
20: DMA4
21: DMA5
22: DMA6
23: DMA7
24: DMA8
25: DMA9
26: DMA10
27: DMA11
28: DMA12
29: AUX
30: ARM
31: VPUDMA
Bank 2:
0: HOSTPORT
1: VIDEOSCALER
2: CCP2TX
3: SDC
4: DSI0
5: AVE
6: CAM0
7: CAM1
8: HDMI0
9: HDMI1
10: PIXELVALVE1
11: I2CSPISLV
12: DSI1
13: PWA0
14: PWA1
15: CPR
16: SMI
17: GPIO0
18: GPIO1
19: GPIO2
20: GPIO3
21: VC_I2C
22: VC_SPI
23: VC_I2SPCM
24: VC_SDIO
25: VC_UART
26: SLIMBUS
27: VEC
28: CPG
29: RNG
30: VC_ARASANSDIO
31: AVSPMON
Example:
intc: interrupt-controller {
compatible = "brcm,bcm2835-armctrl-ic";
reg = <0x7e00b200 0x200>;
interrupt-controller;
#interrupt-cells = <2>;
};
BCM2835 System Timer
The System Timer peripheral provides four 32-bit timer channels and a
single 64-bit free running counter. Each channel has an output compare
register, which is compared against the 32 least significant bits of the
free running counter values, and generates an interrupt.
Required properties:
- compatible : should be "brcm,bcm2835-system-timer.txt"
- reg : Specifies base physical address and size of the registers.
- interrupts : A list of 4 interrupt sinks; one per timer channel.
- clock-frequency : The frequency of the clock that drives the counter, in Hz.
Example:
timer {
compatible = "brcm,bcm2835-system-timer";
reg = <0x7e003000 0x1000>;
interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
clock-frequency = <1000000>;
};
......@@ -10,6 +10,7 @@ apm Applied Micro Circuits Corporation (APM)
arm ARM Ltd.
atmel Atmel Corporation
bosch Bosch Sensortec GmbH
brcm Broadcom Corporation
cavium Cavium, Inc.
chrp Common Hardware Reference Platform
cortina Cortina Systems, Inc.
......
......@@ -1624,6 +1624,16 @@ L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/broadcom/bnx2x/
BROADCOM BCM2835 ARM ARCHICTURE
M: Stephen Warren <swarren@wwwdotorg.org>
L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git
S: Maintained
F: arch/arm/mach-bcm2835/
F: arch/arm/boot/dts/bcm2835*
F: arch/arm/configs/bcm2835_defconfig
F: drivers/*/*bcm2835*
BROADCOM TG3 GIGABIT ETHERNET DRIVER
M: Matt Carlson <mcarlson@broadcom.com>
M: Michael Chan <mchan@broadcom.com>
......
......@@ -347,6 +347,23 @@ config ARCH_AT91
This enables support for systems based on Atmel
AT91RM9200 and AT91SAM9* processors.
config ARCH_BCM2835
bool "Broadcom BCM2835 family"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
select ARM_ERRATA_411920
select ARM_TIMER_SP804
select CLKDEV_LOOKUP
select COMMON_CLK
select CPU_V6
select GENERIC_CLOCKEVENTS
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select USE_OF
help
This enables support for the Broadcom BCM2835 SoC. This SoC is
use in the Raspberry Pi, and Roku 2 devices.
config ARCH_BCMRING
bool "Broadcom BCMRING"
depends on MMU
......@@ -674,6 +691,7 @@ config ARCH_TEGRA
select MIGHT_HAVE_CACHE_L2X0
select ARCH_HAS_CPUFREQ
select USE_OF
select COMMON_CLK
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series).
......
......@@ -136,6 +136,7 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_AT91) := at91
machine-$(CONFIG_ARCH_BCM2835) := bcm2835
machine-$(CONFIG_ARCH_BCMRING) := bcmring
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
machine-$(CONFIG_ARCH_CNS3XXX) := cns3xxx
......
/dts-v1/;
/memreserve/ 0x0c000000 0x04000000;
/include/ "bcm2835.dtsi"
/ {
compatible = "raspberrypi,model-b", "brcm,bcm2835";
model = "Raspberry Pi Model B";
memory {
reg = <0 0x10000000>;
};
};
/include/ "skeleton.dtsi"
/ {
compatible = "brcm,bcm2835";
model = "BCM2835";
interrupt-parent = <&intc>;
chosen {
bootargs = "earlyprintk console=ttyAMA0";
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x7e000000 0x20000000 0x02000000>;
timer {
compatible = "brcm,bcm2835-system-timer";
reg = <0x7e003000 0x1000>;
interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
clock-frequency = <1000000>;
};
intc: interrupt-controller {
compatible = "brcm,bcm2835-armctrl-ic";
reg = <0x7e00b200 0x200>;
interrupt-controller;
#interrupt-cells = <2>;
};
uart@20201000 {
compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
reg = <0x7e201000 0x1000>;
interrupts = <2 25>;
clock-frequency = <3000000>;
};
};
};
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_PERF=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_NAMESPACES=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_JUMP_LABEL=y
# CONFIG_BLOCK is not set
CONFIG_ARCH_BCM2835=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
CONFIG_COMPACTION=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_CLEANCACHE=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SUSPEND is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_TTY_PRINTK=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_FILE_LOCKING is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_PROC_FS is not set
# CONFIG_SYSFS is not set
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_SCHED_TRACER=y
CONFIG_STACK_TRACER=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_KGDB=y
CONFIG_KGDB_KDB=y
CONFIG_TEST_KSTRTOX=y
CONFIG_STRICT_DEVMEM=y
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
......@@ -8,6 +8,7 @@ CONFIG_LOG_BUF_SHIFT=16
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
......
......@@ -14,6 +14,7 @@ CONFIG_NAMESPACES=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
......
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
dtb-y += bcm2835-rpi-b.dtb
/*
* Copyright (C) 2010 Broadcom
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/init.h>
#include <linux/irqchip/bcm2835.h>
#include <linux/of_platform.h>
#include <linux/bcm2835_timer.h>
#include <linux/clk/bcm2835.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/bcm2835_soc.h>
static struct map_desc io_map __initdata = {
.virtual = BCM2835_PERIPH_VIRT,
.pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS),
.length = BCM2835_PERIPH_SIZE,
.type = MT_DEVICE
};
void __init bcm2835_map_io(void)
{
iotable_init(&io_map, 1);
}
void __init bcm2835_init(void)
{
int ret;
bcm2835_init_clocks();
ret = of_platform_populate(NULL, of_default_bus_match_table, NULL,
NULL);
if (ret) {
pr_err("of_platform_populate failed: %d\n", ret);
BUG();
}
}
static const char * const bcm2835_compat[] = {
"brcm,bcm2835",
NULL
};
DT_MACHINE_START(BCM2835, "BCM2835")
.map_io = bcm2835_map_io,
.init_irq = bcm2835_init_irq,
.handle_irq = bcm2835_handle_irq,
.init_machine = bcm2835_init,
.timer = &bcm2835_timer,
.dt_compat = bcm2835_compat
MACHINE_END
/*
* Copyright (C) 2012 Stephen Warren
*
* Derived from code:
* Copyright (C) 2010 Broadcom
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_BCM2835_BCM2835_SOC_H__
#define __MACH_BCM2835_BCM2835_SOC_H__
#include <asm/sizes.h>
#define BCM2835_PERIPH_PHYS 0x20000000
#define BCM2835_PERIPH_VIRT 0xf0000000
#define BCM2835_PERIPH_SIZE SZ_16M
#define BCM2835_DEBUG_PHYS 0x20201000
#define BCM2835_DEBUG_VIRT 0xf0201000
#endif
/*
* Debugging macro include header
*
* Copyright (C) 2010 Broadcom
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <mach/bcm2835_soc.h>
.macro addruart, rp, rv, tmp
ldr \rp, =BCM2835_DEBUG_PHYS
ldr \rv, =BCM2835_DEBUG_VIRT
.endm
#include <asm/hardware/debug-pl01x.S>
/*
* BCM2835 system clock frequency
*
* Copyright (C) 2010 Broadcom
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_TIMEX_H
#define __ASM_ARCH_TIMEX_H
#define CLOCK_TICK_RATE (1000000)
#endif
/*
* Copyright (C) 2010 Broadcom
* Copyright (C) 2003 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/io.h>
#include <linux/amba/serial.h>
#include <mach/bcm2835_soc.h>
#define UART0_BASE BCM2835_DEBUG_PHYS
#define BCM2835_UART_DR IOMEM(UART0_BASE + UART01x_DR)
#define BCM2835_UART_FR IOMEM(UART0_BASE + UART01x_FR)
#define BCM2835_UART_CR IOMEM(UART0_BASE + UART011_CR)
static inline void putc(int c)
{
while (__raw_readl(BCM2835_UART_FR) & UART01x_FR_TXFF)
barrier();
__raw_writel(c, BCM2835_UART_DR);
}
static inline void flush(void)
{
int fr;
do {
fr = __raw_readl(BCM2835_UART_FR);
barrier();
} while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE);
}
#define arch_decomp_setup()
#define arch_decomp_wdog()
......@@ -418,8 +418,8 @@ config MACH_EXYNOS5_DT
select USE_OF
select ARM_AMBA
help
Machine support for Samsung Exynos4 machine with device tree enabled.
Select this if a fdt blob is available for the EXYNOS4 SoC based board.
Machine support for Samsung EXYNOS5 machine with device tree enabled.
Select this if a fdt blob is available for the EXYNOS5 SoC based board.
if ARCH_EXYNOS4
......
......@@ -500,6 +500,10 @@ static struct clk exynos4_init_clocks_off[] = {
.devname = "exynos4-fimc.3",
.enable = exynos4_clk_ip_cam_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "tsi",
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 4),
}, {
.name = "hsmmc",
.devname = "exynos4-sdhci.0",
......@@ -529,6 +533,14 @@ static struct clk exynos4_init_clocks_off[] = {
.parent = &exynos4_clk_aclk_133.clk,
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 9),
}, {
.name = "onenand",
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 15),
}, {
.name = "nfcon",
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 16),
}, {
.name = "dac",
.devname = "s5p-sdo",
......@@ -614,6 +626,25 @@ static struct clk exynos4_init_clocks_off[] = {
.devname = "samsung-i2s.2",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 21),
}, {
.name = "pcm",
.devname = "samsung-pcm.1",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 22),
}, {
.name = "pcm",
.devname = "samsung-pcm.2",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 23),
}, {
.name = "slimbus",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 25),
}, {
.name = "spdif",
.devname = "samsung-spdif",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 26),
}, {
.name = "ac97",
.devname = "samsung-ac97",
......
......@@ -882,6 +882,13 @@ static struct clk exynos5_clk_mdma1 = {
.ctrlbit = (1 << 4),
};
static struct clk exynos5_clk_fimd1 = {
.name = "fimd",
.devname = "exynos5-fb.1",
.enable = exynos5_clk_ip_disp1_ctrl,
.ctrlbit = (1 << 0),
};
struct clk *exynos5_clkset_group_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = NULL,
......@@ -1111,6 +1118,18 @@ static struct clksrc_clk exynos5_clk_sclk_spi2 = {
.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 },
};
struct clksrc_clk exynos5_clk_sclk_fimd1 = {
.clk = {
.name = "sclk_fimd",
.devname = "exynos5-fb.1",
.enable = exynos5_clksrc_mask_disp1_0_ctrl,
.ctrlbit = (1 << 0),
},
.sources = &exynos5_clkset_group,
.reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 },
.reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 },
};
static struct clksrc_clk exynos5_clksrcs[] = {
{
.clk = {
......@@ -1120,16 +1139,6 @@ static struct clksrc_clk exynos5_clksrcs[] = {
.ctrlbit = (1 << 16),
},
.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 8, .size = 8 },
}, {
.clk = {
.name = "sclk_fimd",
.devname = "s3cfb.1",
.enable = exynos5_clksrc_mask_disp1_0_ctrl,
.ctrlbit = (1 << 0),
},
.sources = &exynos5_clkset_group,
.reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 },
.reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 },
}, {
.clk = {
.name = "aclk_266_gscl",
......@@ -1231,12 +1240,14 @@ static struct clksrc_clk *exynos5_sysclks[] = {
&exynos5_clk_mdout_spi0,
&exynos5_clk_mdout_spi1,
&exynos5_clk_mdout_spi2,
&exynos5_clk_sclk_fimd1,
};
static struct clk *exynos5_clk_cdev[] = {
&exynos5_clk_pdma0,
&exynos5_clk_pdma1,
&exynos5_clk_mdma1,
&exynos5_clk_fimd1,
};
static struct clksrc_clk *exynos5_clksrc_cdev[] = {
......@@ -1265,6 +1276,7 @@ static struct clk_lookup exynos5_clk_lookup[] = {
CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),
CLKDEV_INIT("exynos5-fb.1", "lcd", &exynos5_clk_fimd1),
};
static unsigned long exynos5_epll_get_rate(struct clk *clk)
......
......@@ -62,8 +62,8 @@ enum mx35_clks {
kpp_gate, mlb_gate, mshc_gate, owire_gate, pwm_gate, rngc_gate,
rtc_gate, rtic_gate, scc_gate, sdma_gate, spba_gate, spdif_gate,
ssi1_gate, ssi2_gate, uart1_gate, uart2_gate, uart3_gate, usbotg_gate,
wdog_gate, max_gate, admux_gate, csi_gate, iim_gate, gpu2d_gate,
clk_max
wdog_gate, max_gate, admux_gate, csi_gate, csi_div, csi_sel, iim_gate,
gpu2d_gate, clk_max
};
static struct clk *clk[clk_max];
......@@ -142,6 +142,9 @@ int __init mx35_clocks_init()
clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", base + MX35_CCM_PDR4, 28, 4);
clk[csi_sel] = imx_clk_mux("csi_sel", base + MX35_CCM_PDR2, 7, 1, std_sel, ARRAY_SIZE(std_sel));
clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MX35_CCM_PDR2, 16, 6);
clk[asrc_gate] = imx_clk_gate2("asrc_gate", "ipg", base + MX35_CCM_CGR0, 0);
clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", base + MX35_CCM_CGR0, 2);
clk[audmux_gate] = imx_clk_gate2("audmux_gate", "ipg", base + MX35_CCM_CGR0, 4);
......@@ -192,7 +195,7 @@ int __init mx35_clocks_init()
clk[max_gate] = imx_clk_gate2("max_gate", "dummy", base + MX35_CCM_CGR2, 26);
clk[admux_gate] = imx_clk_gate2("admux_gate", "ipg", base + MX35_CCM_CGR2, 30);
clk[csi_gate] = imx_clk_gate2("csi_gate", "ipg", base + MX35_CCM_CGR3, 0);
clk[csi_gate] = imx_clk_gate2("csi_gate", "csi_div", base + MX35_CCM_CGR3, 0);
clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3, 2);
clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3, 4);
......@@ -228,6 +231,7 @@ int __init mx35_clocks_init()
clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1");
clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
......@@ -253,6 +257,7 @@ int __init mx35_clocks_init()
clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[nfc_div], NULL, "mxc_nand.0");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
clk_prepare_enable(clk[spba_gate]);
clk_prepare_enable(clk[gpio1_gate]);
......
......@@ -49,6 +49,7 @@ static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", };
static const char *tve_sel[] = { "tve_pred", "tve_ext_sel", };
static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
static const char *mx53_can_sel[] = { "ipg", "ckih1", "ckih2", "lp_apm", };
enum imx5_clks {
dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred,
......@@ -82,6 +83,7 @@ enum imx5_clks {
ssi_ext1_podf, ssi_ext2_pred, ssi_ext2_podf, ssi1_root_gate,
ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate,
epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate,
can_sel, can1_serial_gate, can1_ipg_gate,
clk_max
};
......@@ -421,8 +423,12 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
clk[esdhc4_per_gate] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14);
clk[usb_phy1_gate] = imx_clk_gate2("usb_phy1_gate", "usb_phy_sel", MXC_CCM_CCGR4, 10);
clk[usb_phy2_gate] = imx_clk_gate2("usb_phy2_gate", "usb_phy_sel", MXC_CCM_CCGR4, 12);
clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "ipg", MXC_CCM_CCGR4, 6);
clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 8);
clk[can_sel] = imx_clk_mux("can_sel", MXC_CCM_CSCMR2, 6, 2,
mx53_can_sel, ARRAY_SIZE(mx53_can_sel));
clk[can1_serial_gate] = imx_clk_gate2("can1_serial_gate", "can_sel", MXC_CCM_CCGR6, 22);
clk[can1_ipg_gate] = imx_clk_gate2("can1_ipg_gate", "ipg", MXC_CCM_CCGR6, 20);
clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "can_sel", MXC_CCM_CCGR4, 8);
clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6);
clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
for (i = 0; i < ARRAY_SIZE(clk); i++)
......@@ -455,6 +461,10 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi");
clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi");
clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi");
clk_register_clkdev(clk[can1_ipg_gate], "ipg", "53fc8000.can");
clk_register_clkdev(clk[can1_serial_gate], "per", "53fc8000.can");
clk_register_clkdev(clk[can2_ipg_gate], "ipg", "53fcc000.can");
clk_register_clkdev(clk[can2_serial_gate], "per", "53fcc000.can");
/* set SDHC root clock to 200MHZ*/
clk_set_rate(clk[esdhc_a_podf], 200000000);
......
......@@ -30,7 +30,7 @@
#define LPC32XX_GPIO_P1_MAX 24
#define LPC32XX_GPIO_P2_MAX 13
#define LPC32XX_GPIO_P3_MAX 6
#define LPC32XX_GPI_P3_MAX 28
#define LPC32XX_GPI_P3_MAX 29
#define LPC32XX_GPO_P3_MAX 24
#define LPC32XX_GPIO_P0_GRP 0
......
......@@ -283,21 +283,25 @@ static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type)
case IRQ_TYPE_EDGE_RISING:
/* Rising edge sensitive */
__lpc32xx_set_irq_type(d->hwirq, 1, 1);
__irq_set_handler_locked(d->hwirq, handle_edge_irq);
break;
case IRQ_TYPE_EDGE_FALLING:
/* Falling edge sensitive */
__lpc32xx_set_irq_type(d->hwirq, 0, 1);
__irq_set_handler_locked(d->hwirq, handle_edge_irq);
break;
case IRQ_TYPE_LEVEL_LOW:
/* Low level sensitive */
__lpc32xx_set_irq_type(d->hwirq, 0, 0);
__irq_set_handler_locked(d->hwirq, handle_level_irq);
break;
case IRQ_TYPE_LEVEL_HIGH:
/* High level sensitive */
__lpc32xx_set_irq_type(d->hwirq, 1, 0);
__irq_set_handler_locked(d->hwirq, handle_level_irq);
break;
/* Other modes are not supported */
......@@ -305,9 +309,6 @@ static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type)
return -EINVAL;
}
/* Ok to use the level handler for all types */
irq_set_handler(d->hwirq, handle_level_irq);
return 0;
}
......
......@@ -24,12 +24,9 @@
#include <linux/irq.h>
#include <linux/dma-mapping.h>
#include <linux/device.h>
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <linux/gpio.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/amba/pl022.h>
#include <linux/amba/pl08x.h>
#include <linux/amba/mmci.h>
#include <linux/of.h>
......@@ -37,6 +34,8 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
#include <linux/mtd/lpc32xx_slc.h>
#include <linux/mtd/lpc32xx_mlc.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
......@@ -156,21 +155,6 @@ static struct clcd_board lpc32xx_clcd_data = {
.remove = lpc32xx_clcd_remove,
};
/*
* AMBA SSP (SPI)
*/
static struct pl022_ssp_controller lpc32xx_ssp0_data = {
.bus_id = 0,
.num_chipselect = 1,
.enable_dma = 0,
};
static struct pl022_ssp_controller lpc32xx_ssp1_data = {
.bus_id = 1,
.num_chipselect = 1,
.enable_dma = 0,
};
static struct pl08x_channel_data pl08x_slave_channels[] = {
{
.bus_id = "nand-slc",
......@@ -223,13 +207,25 @@ static struct mmci_platform_data lpc32xx_mmci_data = {
* gather, and the MMCI driver doesn't do it this way */
};
static struct lpc32xx_slc_platform_data lpc32xx_slc_data = {
.dma_filter = pl08x_filter_id,
};
static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = {
.dma_filter = pl08x_filter_id,
};
static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", &lpc32xx_ssp0_data),
OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", &lpc32xx_ssp1_data),
OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", NULL),
OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", NULL),
OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data),
OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
OF_DEV_AUXDATA("arm,pl18x", 0x20098000, "20098000.sd",
&lpc32xx_mmci_data),
OF_DEV_AUXDATA("nxp,lpc3220-slc", 0x20020000, "20020000.flash",
&lpc32xx_slc_data),
OF_DEV_AUXDATA("nxp,lpc3220-mlc", 0x200a8000, "200a8000.flash",
&lpc32xx_mlc_data),
{ }
};
......@@ -253,12 +249,6 @@ static void __init lpc3250_machine_init(void)
of_platform_populate(NULL, of_default_bus_match_table,
lpc32xx_auxdata_lookup, NULL);
/* Register GPIOs used on this board */
if (gpio_request(MMC_PWR_ENABLE_GPIO, "mmc_power_en"))
pr_err("Error requesting gpio %u", MMC_PWR_ENABLE_GPIO);
else if (gpio_direction_output(MMC_PWR_ENABLE_GPIO, 1))
pr_err("Error setting gpio %u to output", MMC_PWR_ENABLE_GPIO);
}
static char const *lpc32xx_dt_compat[] __initdata = {
......
......@@ -174,6 +174,7 @@ obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_interconnect_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
# EMU peripherals
......
......@@ -211,7 +211,7 @@ void omap2_init_dpll_parent(struct clk *clk)
if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
v == OMAP3XXX_EN_DPLL_FRBYPASS)
clk_reparent(clk, dd->clk_bypass);
} else if (cpu_is_omap44xx()) {
} else if (soc_is_am33xx() || cpu_is_omap44xx()) {
if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
v == OMAP4XXX_EN_DPLL_FRBYPASS ||
v == OMAP4XXX_EN_DPLL_MNBYPASS)
......@@ -257,7 +257,7 @@ u32 omap2_get_dpll_rate(struct clk *clk)
if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
v == OMAP3XXX_EN_DPLL_FRBYPASS)
return dd->clk_bypass->rate;
} else if (cpu_is_omap44xx()) {
} else if (soc_is_am33xx() || cpu_is_omap44xx()) {
if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
v == OMAP4XXX_EN_DPLL_FRBYPASS ||
v == OMAP4XXX_EN_DPLL_MNBYPASS)
......
......@@ -1027,7 +1027,9 @@ static struct omap_clk am33xx_clks[] = {
CLK(NULL, "cefuse_fck", &cefuse_fck, CK_AM33XX),
CLK(NULL, "clkdiv32k_ick", &clkdiv32k_ick, CK_AM33XX),
CLK(NULL, "dcan0_fck", &dcan0_fck, CK_AM33XX),
CLK("481cc000.d_can", NULL, &dcan0_fck, CK_AM33XX),
CLK(NULL, "dcan1_fck", &dcan1_fck, CK_AM33XX),
CLK("481d0000.d_can", NULL, &dcan1_fck, CK_AM33XX),
CLK(NULL, "debugss_ick", &debugss_ick, CK_AM33XX),
CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk, CK_AM33XX),
CLK("davinci-mcasp.0", NULL, &mcasp0_fck, CK_AM33XX),
......
......@@ -311,7 +311,7 @@ static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
* Set jitter correction. No jitter correction for OMAP4 and 3630
* since freqsel field is no longer present
*/
if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) {
v = __raw_readl(dd->control_reg);
v &= ~dd->freqsel_mask;
v |= freqsel << __ffs(dd->freqsel_mask);
......@@ -471,7 +471,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
return -EINVAL;
/* No freqsel on OMAP4 and OMAP3630 */
if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) {
freqsel = _omap3_dpll_compute_freqsel(clk,
dd->last_rounded_n);
if (!freqsel)
......
......@@ -524,6 +524,8 @@ void __init am33xx_init_early(void)
am33xx_voltagedomains_init();
am33xx_powerdomains_init();
am33xx_clockdomains_init();
am33xx_hwmod_init();
omap_hwmod_init_postsetup();
am33xx_clk_init();
}
#endif
......
......@@ -149,8 +149,10 @@
#include "powerdomain.h"
#include "cm2xxx_3xxx.h"
#include "cminst44xx.h"
#include "cm33xx.h"
#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
#include "prm33xx.h"
#include "prminst44xx.h"
#include "mux.h"
#include "pm.h"
......@@ -867,6 +869,26 @@ static void _omap4_enable_module(struct omap_hwmod *oh)
oh->prcm.omap4.clkctrl_offs);
}
/**
* _am33xx_enable_module - enable CLKCTRL modulemode on AM33XX
* @oh: struct omap_hwmod *
*
* Enables the PRCM module mode related to the hwmod @oh.
* No return value.
*/
static void _am33xx_enable_module(struct omap_hwmod *oh)
{
if (!oh->clkdm || !oh->prcm.omap4.modulemode)
return;
pr_debug("omap_hwmod: %s: %s: %d\n",
oh->name, __func__, oh->prcm.omap4.modulemode);
am33xx_cm_module_enable(oh->prcm.omap4.modulemode, oh->clkdm->cm_inst,
oh->clkdm->clkdm_offs,
oh->prcm.omap4.clkctrl_offs);
}
/**
* _omap4_wait_target_disable - wait for a module to be disabled on OMAP4
* @oh: struct omap_hwmod *
......@@ -893,6 +915,31 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh)
oh->prcm.omap4.clkctrl_offs);
}
/**
* _am33xx_wait_target_disable - wait for a module to be disabled on AM33XX
* @oh: struct omap_hwmod *
*
* Wait for a module @oh to enter slave idle. Returns 0 if the module
* does not have an IDLEST bit or if the module successfully enters
* slave idle; otherwise, pass along the return value of the
* appropriate *_cm*_wait_module_idle() function.
*/
static int _am33xx_wait_target_disable(struct omap_hwmod *oh)
{
if (!oh)
return -EINVAL;
if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
return 0;
if (oh->flags & HWMOD_NO_IDLEST)
return 0;
return am33xx_cm_wait_module_idle(oh->clkdm->cm_inst,
oh->clkdm->clkdm_offs,
oh->prcm.omap4.clkctrl_offs);
}
/**
* _count_mpu_irqs - count the number of MPU IRQ lines associated with @oh
* @oh: struct omap_hwmod *oh
......@@ -1613,6 +1660,36 @@ static int _omap4_disable_module(struct omap_hwmod *oh)
return 0;
}
/**
* _am33xx_disable_module - enable CLKCTRL modulemode on AM33XX
* @oh: struct omap_hwmod *
*
* Disable the PRCM module mode related to the hwmod @oh.
* Return EINVAL if the modulemode is not supported and 0 in case of success.
*/
static int _am33xx_disable_module(struct omap_hwmod *oh)
{
int v;
if (!oh->clkdm || !oh->prcm.omap4.modulemode)
return -EINVAL;
pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
am33xx_cm_module_disable(oh->clkdm->cm_inst, oh->clkdm->clkdm_offs,
oh->prcm.omap4.clkctrl_offs);
if (_are_any_hardreset_lines_asserted(oh))
return 0;
v = _am33xx_wait_target_disable(oh);
if (v)
pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
oh->name);
return 0;
}
/**
* _ocp_softreset - reset an omap_hwmod via the OCP_SYSCONFIG bit
* @oh: struct omap_hwmod *
......@@ -2548,6 +2625,33 @@ static int _omap4_wait_target_ready(struct omap_hwmod *oh)
oh->prcm.omap4.clkctrl_offs);
}
/**
* _am33xx_wait_target_ready - wait for a module to leave slave idle
* @oh: struct omap_hwmod *
*
* Wait for a module @oh to leave slave idle. Returns 0 if the module
* does not have an IDLEST bit or if the module successfully leaves
* slave idle; otherwise, pass along the return value of the
* appropriate *_cm*_wait_module_ready() function.
*/
static int _am33xx_wait_target_ready(struct omap_hwmod *oh)
{
if (!oh || !oh->clkdm)
return -EINVAL;
if (oh->flags & HWMOD_NO_IDLEST)
return 0;
if (!_find_mpu_rt_port(oh))
return 0;
/* XXX check module SIDLEMODE, hardreset status */
return am33xx_cm_wait_module_ready(oh->clkdm->cm_inst,
oh->clkdm->clkdm_offs,
oh->prcm.omap4.clkctrl_offs);
}
/**
* _omap2_assert_hardreset - call OMAP2 PRM hardreset fn with hwmod args
* @oh: struct omap_hwmod * to assert hardreset
......@@ -2679,6 +2783,72 @@ static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh,
oh->prcm.omap4.rstctrl_offs);
}
/**
* _am33xx_assert_hardreset - call AM33XX PRM hardreset fn with hwmod args
* @oh: struct omap_hwmod * to assert hardreset
* @ohri: hardreset line data
*
* Call am33xx_prminst_assert_hardreset() with parameters extracted
* from the hwmod @oh and the hardreset line data @ohri. Only
* intended for use as an soc_ops function pointer. Passes along the
* return value from am33xx_prminst_assert_hardreset(). XXX This
* function is scheduled for removal when the PRM code is moved into
* drivers/.
*/
static int _am33xx_assert_hardreset(struct omap_hwmod *oh,
struct omap_hwmod_rst_info *ohri)
{
return am33xx_prm_assert_hardreset(ohri->rst_shift,
oh->clkdm->pwrdm.ptr->prcm_offs,
oh->prcm.omap4.rstctrl_offs);
}
/**
* _am33xx_deassert_hardreset - call AM33XX PRM hardreset fn with hwmod args
* @oh: struct omap_hwmod * to deassert hardreset
* @ohri: hardreset line data
*
* Call am33xx_prminst_deassert_hardreset() with parameters extracted
* from the hwmod @oh and the hardreset line data @ohri. Only
* intended for use as an soc_ops function pointer. Passes along the
* return value from am33xx_prminst_deassert_hardreset(). XXX This
* function is scheduled for removal when the PRM code is moved into
* drivers/.
*/
static int _am33xx_deassert_hardreset(struct omap_hwmod *oh,
struct omap_hwmod_rst_info *ohri)
{
if (ohri->st_shift)
pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
oh->name, ohri->name);
return am33xx_prm_deassert_hardreset(ohri->rst_shift,
oh->clkdm->pwrdm.ptr->prcm_offs,
oh->prcm.omap4.rstctrl_offs,
oh->prcm.omap4.rstst_offs);
}
/**
* _am33xx_is_hardreset_asserted - call AM33XX PRM hardreset fn with hwmod args
* @oh: struct omap_hwmod * to test hardreset
* @ohri: hardreset line data
*
* Call am33xx_prminst_is_hardreset_asserted() with parameters
* extracted from the hwmod @oh and the hardreset line data @ohri.
* Only intended for use as an soc_ops function pointer. Passes along
* the return value from am33xx_prminst_is_hardreset_asserted(). XXX
* This function is scheduled for removal when the PRM code is moved
* into drivers/.
*/
static int _am33xx_is_hardreset_asserted(struct omap_hwmod *oh,
struct omap_hwmod_rst_info *ohri)
{
return am33xx_prm_is_hardreset_asserted(ohri->rst_shift,
oh->clkdm->pwrdm.ptr->prcm_offs,
oh->prcm.omap4.rstctrl_offs);
}
/* Public functions */
u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs)
......@@ -3678,6 +3848,14 @@ void __init omap_hwmod_init(void)
soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
soc_ops.init_clkdm = _init_clkdm;
} else if (soc_is_am33xx()) {
soc_ops.enable_module = _am33xx_enable_module;
soc_ops.disable_module = _am33xx_disable_module;
soc_ops.wait_target_ready = _am33xx_wait_target_ready;
soc_ops.assert_hardreset = _am33xx_assert_hardreset;
soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted;
soc_ops.init_clkdm = _init_clkdm;
} else {
WARN(1, "omap_hwmod: unknown SoC type\n");
}
......
This diff is collapsed.
......@@ -87,6 +87,19 @@ static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
return 0;
}
static unsigned long s3c2440_camif_upll_getrate(struct clk *clk)
{
unsigned long parent_rate = clk_get_rate(clk->parent);
unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
if (!(camdivn & S3C2440_CAMDIVN_CAMCLK_SEL))
return parent_rate;
camdivn &= S3C2440_CAMDIVN_CAMCLK_MASK;
return parent_rate / (camdivn + 1) / 2;
}
/* Extra S3C2440 clocks */
static struct clk s3c2440_clk_cam = {
......@@ -99,6 +112,7 @@ static struct clk s3c2440_clk_cam_upll = {
.name = "camif-upll",
.ops = &(struct clk_ops) {
.set_rate = s3c2440_camif_upll_setrate,
.get_rate = s3c2440_camif_upll_getrate,
.round_rate = s3c2440_camif_upll_round,
},
};
......
......@@ -763,6 +763,13 @@ static void __init kzm_init(void)
platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices));
}
static void kzm9g_restart(char mode, const char *cmd)
{
#define RESCNT2 IOMEM(0xe6188020)
/* Do soft power on reset */
writel((1 << 31), RESCNT2);
}
static const char *kzm9g_boards_compat_dt[] __initdata = {
"renesas,kzm9g",
NULL,
......@@ -777,5 +784,6 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g")
.init_machine = kzm_init,
.init_late = shmobile_init_late,
.timer = &shmobile_timer,
.restart = kzm9g_restart,
.dt_compat = kzm9g_boards_compat_dt,
MACHINE_END
......@@ -86,11 +86,16 @@ static struct clk div4_clks[DIV4_NR] = {
0x0300, CLK_ENABLE_ON_INIT),
};
enum { MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
enum { MSTP323, MSTP322, MSTP321, MSTP320,
MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
MSTP016, MSTP015, MSTP014,
MSTP_NR };
static struct clk mstp_clks[MSTP_NR] = {
[MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 23, 0), /* SDHI0 */
[MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0), /* SDHI1 */
[MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0), /* SDHI2 */
[MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0), /* SDHI3 */
[MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0), /* SCIF0 */
[MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0), /* SCIF1 */
[MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0), /* SCIF2 */
......@@ -149,6 +154,10 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP320]), /* SDHI3 */
};
void __init r8a7779_clock_init(void)
......
......@@ -356,6 +356,26 @@ static struct platform_device gio4_device = {
},
};
static struct resource pmu_resources[] = {
[0] = {
.start = 152,
.end = 152,
.flags = IORESOURCE_IRQ,
},
[1] = {
.start = 153,
.end = 153,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device pmu_device = {
.name = "arm-pmu",
.id = -1,
.num_resources = ARRAY_SIZE(pmu_resources),
.resource = pmu_resources,
};
static struct platform_device *emev2_early_devices[] __initdata = {
&uart0_device,
&uart1_device,
......@@ -370,6 +390,7 @@ static struct platform_device *emev2_late_devices[] __initdata = {
&gio2_device,
&gio3_device,
&gio4_device,
&pmu_device,
};
void __init emev2_add_standard_devices(void)
......
......@@ -734,6 +734,26 @@ static struct platform_device mpdma0_device = {
},
};
static struct resource pmu_resources[] = {
[0] = {
.start = gic_spi(55),
.end = gic_spi(55),
.flags = IORESOURCE_IRQ,
},
[1] = {
.start = gic_spi(56),
.end = gic_spi(56),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device pmu_device = {
.name = "arm-pmu",
.id = -1,
.num_resources = ARRAY_SIZE(pmu_resources),
.resource = pmu_resources,
};
static struct platform_device *sh73a0_early_devices[] __initdata = {
&scif0_device,
&scif1_device,
......@@ -757,6 +777,7 @@ static struct platform_device *sh73a0_late_devices[] __initdata = {
&i2c4_device,
&dma0_device,
&mpdma0_device,
&pmu_device,
};
#define SRCR2 IOMEM(0xe61580b0)
......
......@@ -12,9 +12,13 @@ obj-y += powergate.o
obj-y += apbio.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_CPU_IDLE) += sleep.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks_data.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-t20.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks_data.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-t30.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_SMP) += reset.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
......
......@@ -70,6 +70,7 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
/* name parent rate enabled */
{ "uarta", "pll_p", 216000000, true },
{ "uartd", "pll_p", 216000000, true },
{ "usbd", "clk_m", 12000000, false },
{ "usb2", "clk_m", 12000000, false },
......
This diff is collapsed.
......@@ -2,6 +2,7 @@
* arch/arm/mach-tegra/include/mach/clock.h
*
* Copyright (C) 2010 Google, Inc.
* Copyright (c) 2012 NVIDIA CORPORATION. All rights reserved.
*
* Author:
* Colin Cross <ccross@google.com>
......@@ -20,9 +21,9 @@
#ifndef __MACH_TEGRA_CLOCK_H
#define __MACH_TEGRA_CLOCK_H
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include <mach/clk.h>
......@@ -52,7 +53,8 @@
#define ENABLE_ON_INIT (1 << 28)
#define PERIPH_ON_APB (1 << 29)
struct clk;
struct clk_tegra;
#define to_clk_tegra(_hw) container_of(_hw, struct clk_tegra, hw)
struct clk_mux_sel {
struct clk *input;
......@@ -68,47 +70,29 @@ struct clk_pll_freq_table {
u8 cpcon;
};
struct clk_ops {
void (*init)(struct clk *);
int (*enable)(struct clk *);
void (*disable)(struct clk *);
int (*set_parent)(struct clk *, struct clk *);
int (*set_rate)(struct clk *, unsigned long);
long (*round_rate)(struct clk *, unsigned long);
void (*reset)(struct clk *, bool);
int (*clk_cfg_ex)(struct clk *,
enum tegra_clk_ex_param, u32);
};
enum clk_state {
UNINITIALIZED = 0,
ON,
OFF,
};
struct clk {
struct clk_tegra {
/* node for master clocks list */
struct list_head node; /* node for list of all clocks */
struct clk_lookup lookup;
struct clk_hw hw;
#ifdef CONFIG_DEBUG_FS
struct dentry *dent;
#endif
bool set;
struct clk_ops *ops;
unsigned long rate;
unsigned long fixed_rate;
unsigned long max_rate;
unsigned long min_rate;
u32 flags;
const char *name;
u32 refcnt;
enum clk_state state;
struct clk *parent;
u32 div;
u32 mul;
const struct clk_mux_sel *inputs;
u32 reg;
u32 reg_shift;
......@@ -144,7 +128,8 @@ struct clk {
} shared_bus_user;
} u;
spinlock_t spinlock;
void (*reset)(struct clk_hw *, bool);
int (*clk_cfg_ex)(struct clk_hw *, enum tegra_clk_ex_param, u32);
};
struct clk_duplicate {
......@@ -159,13 +144,10 @@ struct tegra_clk_init_table {
bool enabled;
};
void tegra_clk_add(struct clk *c);
void tegra2_init_clocks(void);
void tegra30_init_clocks(void);
void clk_init(struct clk *clk);
struct clk *tegra_get_clock_by_name(const char *name);
int clk_reparent(struct clk *c, struct clk *parent);
void tegra_clk_init_from_table(struct tegra_clk_init_table *table);
unsigned long clk_get_rate_locked(struct clk *c);
int clk_set_rate_locked(struct clk *c, unsigned long rate);
#endif
......@@ -34,6 +34,7 @@
#include "fuse.h"
#include "pmc.h"
#include "apbio.h"
#include "sleep.h"
/*
* Storage for debug-macro.S's state.
......@@ -135,6 +136,7 @@ void __init tegra20_init_early(void)
tegra_init_cache(0x331, 0x441);
tegra_pmc_init();
tegra_powergate_init();
tegra20_hotplug_init();
}
#endif
#ifdef CONFIG_ARCH_TEGRA_3x_SOC
......@@ -147,11 +149,11 @@ void __init tegra30_init_early(void)
tegra_init_cache(0x441, 0x551);
tegra_pmc_init();
tegra_powergate_init();
tegra30_hotplug_init();
}
#endif
void __init tegra_init_late(void)
{
tegra_clk_debugfs_init();
tegra_powergate_debugfs_init();
}
......@@ -49,6 +49,8 @@ static struct cpufreq_frequency_table freq_table[] = {
#define NUM_CPUS 2
static struct clk *cpu_clk;
static struct clk *pll_x_clk;
static struct clk *pll_p_clk;
static struct clk *emc_clk;
static unsigned long target_cpu_speed[NUM_CPUS];
......@@ -71,6 +73,42 @@ static unsigned int tegra_getspeed(unsigned int cpu)
return rate;
}
static int tegra_cpu_clk_set_rate(unsigned long rate)
{
int ret;
/*
* Take an extra reference to the main pll so it doesn't turn
* off when we move the cpu off of it
*/
clk_prepare_enable(pll_x_clk);
ret = clk_set_parent(cpu_clk, pll_p_clk);
if (ret) {
pr_err("Failed to switch cpu to clock pll_p\n");
goto out;
}
if (rate == clk_get_rate(pll_p_clk))
goto out;
ret = clk_set_rate(pll_x_clk, rate);
if (ret) {
pr_err("Failed to change pll_x to %lu\n", rate);
goto out;
}
ret = clk_set_parent(cpu_clk, pll_x_clk);
if (ret) {
pr_err("Failed to switch cpu to clock pll_x\n");
goto out;
}
out:
clk_disable_unprepare(pll_x_clk);
return ret;
}
static int tegra_update_cpu_speed(unsigned long rate)
{
int ret = 0;
......@@ -101,7 +139,7 @@ static int tegra_update_cpu_speed(unsigned long rate)
freqs.old, freqs.new);
#endif
ret = clk_set_rate(cpu_clk, freqs.new * 1000);
ret = tegra_cpu_clk_set_rate(freqs.new * 1000);
if (ret) {
pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n",
freqs.new);
......@@ -183,6 +221,14 @@ static int tegra_cpu_init(struct cpufreq_policy *policy)
if (IS_ERR(cpu_clk))
return PTR_ERR(cpu_clk);
pll_x_clk = clk_get_sys(NULL, "pll_x");
if (IS_ERR(pll_x_clk))
return PTR_ERR(pll_x_clk);
pll_p_clk = clk_get_sys(NULL, "pll_p");
if (IS_ERR(pll_p_clk))
return PTR_ERR(pll_p_clk);
emc_clk = clk_get_sys("cpu", "emc");
if (IS_ERR(emc_clk)) {
clk_put(cpu_clk);
......
......@@ -7,17 +7,13 @@
#include "flowctrl.h"
#include "reset.h"
#include "sleep.h"
#define APB_MISC_GP_HIDREV 0x804
#define PMC_SCRATCH41 0x140
#define RESET_DATA(x) ((TEGRA_RESET_##x)*4)
.macro mov32, reg, val
movw \reg, #:lower16:\val
movt \reg, #:upper16:\val
.endm
.section ".text.head", "ax"
__CPUINIT
......
This diff is collapsed.
......@@ -34,7 +34,10 @@ enum tegra_clk_ex_param {
void tegra_periph_reset_deassert(struct clk *c);
void tegra_periph_reset_assert(struct clk *c);
#ifndef CONFIG_COMMON_CLK
unsigned long clk_get_rate_all_locked(struct clk *c);
#endif
void tegra2_sdmmc_tap_delay(struct clk *c, int delay);
int tegra_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting);
......
......@@ -31,6 +31,7 @@
#include "fuse.h"
#include "flowctrl.h"
#include "reset.h"
#include "tegra_cpu_car.h"
extern void tegra_secondary_startup(void);
......@@ -38,17 +39,6 @@ static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
#define EVP_CPU_RESET_VECTOR \
(IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX \
(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x4c)
#define CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET \
(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x340)
#define CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR \
(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x344)
#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR \
(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x34c)
#define CPU_CLOCK(cpu) (0x1<<(8+cpu))
#define CPU_RESET(cpu) (0x1111ul<<(cpu))
void __cpuinit platform_secondary_init(unsigned int cpu)
{
......@@ -63,13 +53,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
static int tegra20_power_up_cpu(unsigned int cpu)
{
u32 reg;
/* Enable the CPU clock. */
reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
writel(reg & ~CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
barrier();
reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
tegra_enable_cpu_clock(cpu);
/* Clear flow controller CSR. */
flowctrl_write_cpu_csr(cpu, 0);
......@@ -79,7 +64,6 @@ static int tegra20_power_up_cpu(unsigned int cpu)
static int tegra30_power_up_cpu(unsigned int cpu)
{
u32 reg;
int ret, pwrgateid;
unsigned long timeout;
......@@ -103,8 +87,7 @@ static int tegra30_power_up_cpu(unsigned int cpu)
}
/* CPU partition is powered. Enable the CPU clock. */
writel(CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
tegra_enable_cpu_clock(cpu);
udelay(10);
/* Remove I/O clamps. */
......@@ -128,8 +111,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* via the flow controller). This will have no effect on first boot
* of the CPU since it should already be in reset.
*/
writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET);
dmb();
tegra_put_cpu_in_reset(cpu);
/*
* Unhalt the CPU. If the flow controller was used to power-gate the
......@@ -155,8 +137,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
goto done;
/* Take the CPU out of reset. */
writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR);
wmb();
tegra_cpu_out_of_reset(cpu);
done:
return status;
}
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
......@@ -152,4 +152,6 @@ source "drivers/vme/Kconfig"
source "drivers/pwm/Kconfig"
source "drivers/irqchip/Kconfig"
endmenu
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment