Commit 121839be authored by Yaniv Rosner's avatar Yaniv Rosner Committed by David S. Miller

bnx2x: Do not enable CL37 BAM unless it is explicitly enabled

Enabling CL37 BAM on BCM8073 by default may lead to link issues since
not all switches support it. So enable CL37 BAM only if explicitly
selected.
Signed-off-by: default avatarYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 650154bf
......@@ -244,7 +244,14 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */
u16 xgxs_config_tx[4]; /* 0x1A0 */
u32 Reserved1[57]; /* 0x1A8 */
u32 Reserved1[56]; /* 0x1A8 */
u32 default_cfg; /* 0x288 */
/* Enable BAM on KR */
#define PORT_HW_CFG_ENABLE_BAM_ON_KR_MASK 0x00100000
#define PORT_HW_CFG_ENABLE_BAM_ON_KR_SHIFT 20
#define PORT_HW_CFG_ENABLE_BAM_ON_KR_DISABLED 0x00000000
#define PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED 0x00100000
u32 speed_capability_mask2; /* 0x28C */
#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_MASK 0x0000FFFF
#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_SHIFT 0
......
......@@ -3525,13 +3525,19 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy,
DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1): 0x%x\n", tmp1);
/* Enable CL37 BAM */
if (REG_RD(bp, params->shmem_base +
offsetof(struct shmem_region, dev_info.
port_hw_config[params->port].default_cfg)) &
PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED) {
bnx2x_cl45_read(bp, phy,
MDIO_AN_DEVAD,
MDIO_AN_REG_8073_BAM, &val);
bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD,
MDIO_AN_REG_8073_BAM, val | 1);
DP(NETIF_MSG_LINK, "Enable CL37 BAM on KR\n");
}
if (params->loopback_mode == LOOPBACK_EXT) {
bnx2x_807x_force_10G(bp, phy);
DP(NETIF_MSG_LINK, "Forced speed 10G on 807X\n");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment