Commit 127302bb authored by Yaniv Rosner's avatar Yaniv Rosner Committed by David S. Miller

bnx2x: Fix PFC setting on BCM57840

This patch handles the second port of a path in a 4-port device of
BCM57840.
Signed-off-by: default avatarYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 11b2ec6b
......@@ -2502,7 +2502,7 @@ static void bnx2x_update_pfc_nig(struct link_params *params,
struct bnx2x_nig_brb_pfc_port_params *nig_params)
{
u32 xcm_mask = 0, ppp_enable = 0, pause_enable = 0, llfc_out_en = 0;
u32 llfc_enable = 0, xcm0_out_en = 0, p0_hwpfc_enable = 0;
u32 llfc_enable = 0, xcm_out_en = 0, hwpfc_enable = 0;
u32 pkt_priority_to_cos = 0;
struct bnx2x *bp = params->bp;
u8 port = params->port;
......@@ -2516,8 +2516,7 @@ static void bnx2x_update_pfc_nig(struct link_params *params,
* MAC control frames (that are not pause packets)
* will be forwarded to the XCM.
*/
xcm_mask = REG_RD(bp,
port ? NIG_REG_LLH1_XCM_MASK :
xcm_mask = REG_RD(bp, port ? NIG_REG_LLH1_XCM_MASK :
NIG_REG_LLH0_XCM_MASK);
/*
* nig params will override non PFC params, since it's possible to
......@@ -2533,8 +2532,8 @@ static void bnx2x_update_pfc_nig(struct link_params *params,
ppp_enable = 1;
xcm_mask &= ~(port ? NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN :
NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN);
xcm0_out_en = 0;
p0_hwpfc_enable = 1;
xcm_out_en = 0;
hwpfc_enable = 1;
} else {
if (nig_params) {
llfc_out_en = nig_params->llfc_out_en;
......@@ -2545,7 +2544,7 @@ static void bnx2x_update_pfc_nig(struct link_params *params,
xcm_mask |= (port ? NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN :
NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN);
xcm0_out_en = 1;
xcm_out_en = 1;
}
if (CHIP_IS_E3(bp))
......@@ -2564,13 +2563,16 @@ static void bnx2x_update_pfc_nig(struct link_params *params,
REG_WR(bp, port ? NIG_REG_LLH1_XCM_MASK :
NIG_REG_LLH0_XCM_MASK, xcm_mask);
REG_WR(bp, NIG_REG_LLFC_EGRESS_SRC_ENABLE_0, 0x7);
REG_WR(bp, port ? NIG_REG_LLFC_EGRESS_SRC_ENABLE_1 :
NIG_REG_LLFC_EGRESS_SRC_ENABLE_0, 0x7);
/* output enable for RX_XCM # IF */
REG_WR(bp, NIG_REG_XCM0_OUT_EN, xcm0_out_en);
REG_WR(bp, port ? NIG_REG_XCM1_OUT_EN :
NIG_REG_XCM0_OUT_EN, xcm_out_en);
/* HW PFC TX enable */
REG_WR(bp, NIG_REG_P0_HWPFC_ENABLE, p0_hwpfc_enable);
REG_WR(bp, port ? NIG_REG_P1_HWPFC_ENABLE :
NIG_REG_P0_HWPFC_ENABLE, hwpfc_enable);
if (nig_params) {
u8 i = 0;
......
......@@ -2176,6 +2176,7 @@
* set to 0x345678021. This is a new register (with 2_) added in E3 B0 to
* accommodate the 9 input clients to ETS arbiter. */
#define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB 0x18684
#define NIG_REG_P1_HWPFC_ENABLE 0x181d0
#define NIG_REG_P1_MAC_IN_EN 0x185c0
/* [RW 1] Output enable for TX MAC interface */
#define NIG_REG_P1_MAC_OUT_EN 0x185c4
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment