net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8061

Following a similar reinstate for the KSZ8081 and KSZ9031.

Older kernels would use the genphy_soft_reset if the PHY did not implement
a .soft_reset.

The KSZ8061 errata described here:
https://ww1.microchip.com/downloads/en/DeviceDoc/KSZ8061-Errata-DS80000688B.pdf
and worked around with 232ba3a5 ("net: phy: Micrel KSZ8061: link failure after cable connect")
is back again without this soft reset.

Fixes: 6e2d85ec ("net: phy: Stop with excessive soft reset")
Tested-by: Karim Ben Houcine <karim.benhoucine@landisgyr.com>
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/micrel.c

@@ -5327,6 +5327,7 @@ static struct phy_driver ksphy_driver[] = {
 	/* PHY_BASIC_FEATURES */
 	.probe		= kszphy_probe,
 	.config_init	= ksz8061_config_init,
+	.soft_reset	= genphy_soft_reset,
 	.config_intr	= kszphy_config_intr,
 	.handle_interrupt = kszphy_handle_interrupt,
 	.suspend	= kszphy_suspend,