Commit 12f022d2 authored by Milo(Woogyom) Kim's avatar Milo(Woogyom) Kim Committed by Bryan Wu

leds-lp55xx: clean up definitions

 Remove unused definitions and change hex values to capital letters
Signed-off-by: default avatarMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: default avatarBryan Wu <cooloney@gmail.com>
parent 93ca4093
......@@ -39,18 +39,9 @@
#include "leds-lp55xx-common.h"
#define LP5521_PROGRAM_LENGTH 32 /* in bytes */
#define LP5521_MAX_LEDS 3 /* Maximum number of LEDs */
#define LP5521_MAX_ENGINES 3 /* Maximum number of engines */
#define LP5521_ENG_MASK_BASE 0x30 /* 00110000 */
#define LP5521_ENG_STATUS_MASK 0x07 /* 00000111 */
#define LP5521_CMD_LOAD 0x15 /* 00010101 */
#define LP5521_CMD_RUN 0x2a /* 00101010 */
#define LP5521_CMD_DIRECT 0x3f /* 00111111 */
#define LP5521_CMD_DISABLED 0x00 /* 00000000 */
#define LP5521_PROGRAM_LENGTH 32
#define LP5521_MAX_LEDS 3
#define LP5521_CMD_DIRECT 0x3F
/* Registers */
#define LP5521_REG_ENABLE 0x00
......@@ -62,22 +53,14 @@
#define LP5521_REG_G_CURRENT 0x06
#define LP5521_REG_B_CURRENT 0x07
#define LP5521_REG_CONFIG 0x08
#define LP5521_REG_R_CHANNEL_PC 0x09
#define LP5521_REG_G_CHANNEL_PC 0x0A
#define LP5521_REG_B_CHANNEL_PC 0x0B
#define LP5521_REG_STATUS 0x0C
#define LP5521_REG_RESET 0x0D
#define LP5521_REG_GPO 0x0E
#define LP5521_REG_R_PROG_MEM 0x10
#define LP5521_REG_G_PROG_MEM 0x30
#define LP5521_REG_B_PROG_MEM 0x50
#define LP5521_PROG_MEM_BASE LP5521_REG_R_PROG_MEM
#define LP5521_PROG_MEM_SIZE 0x20
/* Base register to set LED current */
#define LP5521_REG_LED_CURRENT_BASE LP5521_REG_R_CURRENT
/* Base register to set the brightness */
#define LP5521_REG_LED_PWM_BASE LP5521_REG_R_PWM
......@@ -96,9 +79,6 @@
/* default R channel current register value */
#define LP5521_REG_R_CURR_DEFAULT 0xAF
/* Pattern Mode */
#define PATTERN_OFF 0
/* Reset register value */
#define LP5521_RESET 0xFF
......
......@@ -39,76 +39,38 @@
#include "leds-lp55xx-common.h"
#define LP5523_PROGRAM_LENGTH 32
#define LP5523_MAX_LEDS 9
/* Registers */
#define LP5523_REG_ENABLE 0x00
#define LP5523_REG_OP_MODE 0x01
#define LP5523_REG_RATIOMETRIC_MSB 0x02
#define LP5523_REG_RATIOMETRIC_LSB 0x03
#define LP5523_REG_ENABLE_LEDS_MSB 0x04
#define LP5523_REG_ENABLE_LEDS_LSB 0x05
#define LP5523_REG_LED_CNTRL_BASE 0x06
#define LP5523_REG_LED_PWM_BASE 0x16
#define LP5523_REG_LED_CURRENT_BASE 0x26
#define LP5523_REG_CONFIG 0x36
#define LP5523_REG_CHANNEL1_PC 0x37
#define LP5523_REG_CHANNEL2_PC 0x38
#define LP5523_REG_CHANNEL3_PC 0x39
#define LP5523_REG_STATUS 0x3a
#define LP5523_REG_GPO 0x3b
#define LP5523_REG_VARIABLE 0x3c
#define LP5523_REG_RESET 0x3d
#define LP5523_REG_TEMP_CTRL 0x3e
#define LP5523_REG_TEMP_READ 0x3f
#define LP5523_REG_TEMP_WRITE 0x40
#define LP5523_REG_STATUS 0x3A
#define LP5523_REG_RESET 0x3D
#define LP5523_REG_LED_TEST_CTRL 0x41
#define LP5523_REG_LED_TEST_ADC 0x42
#define LP5523_REG_ENG1_VARIABLE 0x45
#define LP5523_REG_ENG2_VARIABLE 0x46
#define LP5523_REG_ENG3_VARIABLE 0x47
#define LP5523_REG_MASTER_FADER1 0x48
#define LP5523_REG_MASTER_FADER2 0x49
#define LP5523_REG_MASTER_FADER3 0x4a
#define LP5523_REG_CH1_PROG_START 0x4c
#define LP5523_REG_CH2_PROG_START 0x4d
#define LP5523_REG_CH3_PROG_START 0x4e
#define LP5523_REG_PROG_PAGE_SEL 0x4f
#define LP5523_REG_PROG_PAGE_SEL 0x4F
#define LP5523_REG_PROG_MEM 0x50
#define LP5523_CMD_LOAD 0x15 /* 00010101 */
#define LP5523_CMD_RUN 0x2a /* 00101010 */
#define LP5523_CMD_DISABLED 0x00 /* 00000000 */
/* Bit description in registers */
#define LP5523_ENABLE 0x40
#define LP5523_AUTO_INC 0x40
#define LP5523_PWR_SAVE 0x20
#define LP5523_PWM_PWR_SAVE 0x04
#define LP5523_CP_1 0x08
#define LP5523_CP_1_5 0x10
#define LP5523_CP_AUTO 0x18
#define LP5523_INT_CLK 0x01
#define LP5523_AUTO_CLK 0x02
#define LP5523_EN_LEDTEST 0x80
#define LP5523_LEDTEST_DONE 0x80
#define LP5523_RESET 0xFF
#define LP5523_DEFAULT_CURRENT 50 /* microAmps */
#define LP5523_PROGRAM_LENGTH 32 /* in bytes */
#define LP5523_PROGRAM_PAGES 6
#define LP5523_ADC_SHORTCIRC_LIM 80
#define LP5523_MAX_LEDS 9
#define LP5523_ENGINES 3
#define LP5523_ENG_MASK_BASE 0x30 /* 00110000 */
#define LP5523_ENG_STATUS_MASK 0x07 /* 00000111 */
#define LP5523_IRQ_FLAGS IRQF_TRIGGER_FALLING
#define LP5523_EXT_CLK_USED 0x08
#define LED_ACTIVE(mux, led) (!!(mux & (0x0001 << led)))
#define SHIFT_MASK(id) (((id) - 1) * 2)
/* Memory Page Selection */
#define LP5523_PAGE_ENG1 0
#define LP5523_PAGE_ENG2 1
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment