Merge tag 'for-v3.20' of git://git.infradead.org/battery-2.6

Pull power supply and reset changes from Sebastian Reichel:
 "New drivers:
   - charger driver for Maxim 77693
   - battery gauge driver for LTC 2941/2943
   - battery gauge driver for RT5033
   - reset driver for R-Mobile platforms

  Convert drivers to restart handler framework:
   - arm-versatile
   - at91
   - st-poweroff

  Misc:
   - remove deprecated sun6i reboot driver
   - use alarmtimer instead of rtc in charger-manager
   - misc fixes"

* tag 'for-v3.20' of git://git.infradead.org/battery-2.6: (48 commits)
  power_supply: 88pm860x: Fix leaked power supply on probe fail
  power/reset: restart-poweroff: Remove arm dependencies
  power/reset: st-poweroff: Fix misleading Kconfig description
  power/reset: st-poweroff: Register with kernel restart handler
  power/reset: Remove sun6i reboot driver
  power/reset: at91: Register with kernel restart handler
  power/reset: arm-versatile: Register with kernel restart handler
  power: test_power: Use enum as index for array of supplies
  Add devicetree binding documentation for the LTC2941/LTC2943 driver
  Add LTC2941/LTC2943 Battery Gauge Driver
  power/reset: brcmstb: Add support for old 65nm chips
  power/reset: brcmstb: Use the DT "compatible" string to indicate bit positions
  power/reset: brcmstb: Make the driver buildable on MIPS
  power: charger-manager: Use alarmtimer for battery monitoring in suspend.
  power/reset: at91-poweroff: Fix error handling and other compiler warnings
  bq27x00_battery: Call power_supply_changed only when capacity changed
  bq27x00_battery: fix register offset for bq27425
  power: max14577: Remove SYSFS dependency from Kconfig
  power: bq24190_charger: suppress build warning
  power: reset: Add reset driver for R-Mobile platforms
  ...

Documentation/ABI/testing/sysfs-class-power

@@ -32,3 +32,45 @@ Description:
 		Valid values:
 		- 5, 6 or 7 (hours),
 		- 0: disabled.
+
+What:		/sys/class/power_supply/max77693-charger/device/fast_charge_timer
+Date:		January 2015
+KernelVersion:	3.19.0
+Contact:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+Description:
+		This entry shows and sets the maximum time the max77693
+		charger operates in fast-charge mode. When the timer expires
+		the device will terminate fast-charge mode (charging current
+		will drop to 0 A) and will trigger interrupt.
+
+		Valid values:
+		- 4 - 16 (hours), step by 2 (rounded down)
+		- 0: disabled.
+
+What:		/sys/class/power_supply/max77693-charger/device/top_off_threshold_current
+Date:		January 2015
+KernelVersion:	3.19.0
+Contact:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+Description:
+		This entry shows and sets the charging current threshold for
+		entering top-off charging mode. When charging current in fast
+		charge mode drops below this value, the charger will trigger
+		interrupt and start top-off charging mode.
+
+		Valid values:
+		- 100000 - 200000 (microamps), step by 25000 (rounded down)
+		- 200000 - 350000 (microamps), step by 50000 (rounded down)
+		- 0: disabled.
+
+What:		/sys/class/power_supply/max77693-charger/device/top_off_timer
+Date:		January 2015
+KernelVersion:	3.19.0
+Contact:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+Description:
+		This entry shows and sets the maximum time the max77693
+		charger operates in top-off charge mode. When the timer expires
+		the device will terminate top-off charge mode (charging current
+		will drop to 0 A) and will trigger interrupt.
+
+		Valid values:
+		- 0 - 70 (minutes), step by 10 (rounded down)

Documentation/devicetree/bindings/arm/brcm-brcmstb.txt

@@ -79,7 +79,9 @@ reboot
 Required properties
 
     - compatible
-        The string property "brcm,brcmstb-reboot".
+        The string property "brcm,brcmstb-reboot" for 40nm/28nm chips with
+        the new SYS_CTRL interface, or "brcm,bcm7038-reboot" for 65nm
+        chips with the old SUN_TOP_CTRL interface.
 
     - syscon
         A phandle / integer array that points to the syscon node which describes

Documentation/devicetree/bindings/mfd/max77693.txt

@@ -41,6 +41,41 @@ Optional properties:
 	 To get more informations, please refer to documentaion.
 	[*] refer Documentation/devicetree/bindings/pwm/pwm.txt
 
+- charger : Node configuring the charger driver.
+  If present, required properties:
+  - compatible : Must be "maxim,max77693-charger".
+
+  Optional properties (if not set, defaults will be used):
+  - maxim,constant-microvolt : Battery constant voltage in uV. The charger
+    will operate in fast charge constant current mode till battery voltage
+    reaches this level. Then the charger will switch to fast charge constant
+    voltage mode. Also vsys (system voltage) will be set to this value when
+    DC power is supplied but charger is not enabled.
+    Valid values: 3650000 - 4400000, step by 25000 (rounded down)
+    Default: 4200000
+
+  - maxim,min-system-microvolt : Minimal system voltage in uV.
+    Valid values: 3000000 - 3700000, step by 100000 (rounded down)
+    Default: 3600000
+
+  - maxim,thermal-regulation-celsius : Temperature in Celsius for entering
+    high temperature charging mode. If die temperature exceeds this value
+    the charging current will be reduced by 105 mA/Celsius.
+    Valid values: 70, 85, 100, 115
+    Default: 100
+
+  - maxim,battery-overcurrent-microamp : Overcurrent protection threshold
+    in uA (current from battery to system).
+    Valid values: 2000000 - 3500000, step by 250000 (rounded down)
+    Default: 3500000
+
+  - maxim,charge-input-threshold-microvolt : Threshold voltage in uV for
+    triggering input voltage regulation loop. If input voltage decreases
+    below this value, the input current will be reduced to reach the
+    threshold voltage.
+    Valid values: 4300000, 4700000, 4800000, 4900000
+    Default: 4300000
+
 Example:
 	max77693@66 {
 		compatible = "maxim,max77693";
@@ -73,4 +108,14 @@ Example:
 			pwms = <&pwm 0 40000 0>;
 			pwm-names = "haptic";
 		};
+
+		charger {
+			compatible = "maxim,max77693-charger";
+
+			maxim,constant-microvolt = <4200000>;
+			maxim,min-system-microvolt = <3600000>;
+			maxim,thermal-regulation-celsius = <75>;
+			maxim,battery-overcurrent-microamp = <3000000>;
+			maxim,charge-input-threshold-microvolt = <4300000>;
+		};
 	};

Documentation/devicetree/bindings/power/ltc2941.txt

+binding for LTC2941 and LTC2943 battery gauges
+
+Both the LTC2941 and LTC2943 measure battery capacity.
+The LTC2943 is compatible with the LTC2941, it adds voltage and
+temperature monitoring, and uses a slightly different conversion
+formula for the charge counter.
+
+Required properties:
+- compatible: Should contain "ltc2941" or "ltc2943" which also indicates the
+    type of I2C chip attached.
+- reg: The 7-bit I2C address.
+- lltc,resistor-sense: The sense resistor value in milli-ohms. Can be a 32-bit
+    negative value when the battery has been connected to the wrong end of the
+    resistor.
+- lltc,prescaler-exponent: The prescaler exponent as explained in the datasheet.
+    This determines the range and accuracy of the gauge. The value is programmed
+    into the chip only if it differs from the current setting. The setting is
+    lost when the battery is disconnected.
+
+Example from the Topic Miami Florida board:
+
+	fuelgauge: ltc2943@64 {
+		compatible = "ltc2943";
+		reg = <0x64>;
+		lltc,resistor-sense = <15>;
+		lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */
+	};

Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt

 Binding for the LTC2952 PowerPath controller
 
 This chip is used to externally trigger a system shut down. Once the trigger has
-been sent, the chips' watchdog has to be reset to gracefully shut down.
-If the Linux systems decides to shut down it powers off the platform via the
-kill signal.
+been sent, the chip's watchdog has to be reset to gracefully shut down.
+A full powerdown can be triggered via the kill signal.
 
 Required properties:
 
 - compatible:		Must contain: "lltc,ltc2952"
-- trigger-gpios:	phandle + gpio-specifier for the GPIO connected to the
-			chip's trigger line
 - watchdog-gpios:	phandle + gpio-specifier for the GPIO connected to the
 			chip's watchdog line
 - kill-gpios:		phandle + gpio-specifier for the GPIO connected to the
 			chip's kill line
 
+Optional properties:
+- trigger-gpios:	phandle + gpio-specifier for the GPIO connected to the
+			chip's trigger line. If this property is not set, the
+			trigger function is ignored and the chip is kept alive
+			until an explicit kill signal is received
+
 Example:
 
 ltc2952 {

MAINTAINERS

@@ -6165,6 +6165,13 @@ F:	Documentation/devicetree/bindings/i2c/max6697.txt
 F:	drivers/hwmon/max6697.c
 F:	include/linux/platform_data/max6697.h
 
+MAXIM MUIC CHARGER DRIVERS FOR EXYNOS BASED BOARDS
+M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+L:	linux-pm@vger.kernel.org
+S:	Supported
+F:	drivers/power/max14577_charger.c
+F:	drivers/power/max77693_charger.c
+
 MAXIRADIO FM RADIO RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org

drivers/power/88pm860x_charger.c

@@ -711,6 +711,7 @@ static int pm860x_charger_probe(struct platform_device *pdev)
 	return 0;
 
 out_irq:
+	power_supply_unregister(&info->usb);
 	while (--i >= 0)
 		free_irq(info->irq[i], info);
 out:

drivers/power/Kconfig

@@ -315,7 +315,7 @@ config CHARGER_GPIO
 
 config CHARGER_MANAGER
 	bool "Battery charger manager for multiple chargers"
-	depends on REGULATOR && RTC_CLASS
+	depends on REGULATOR
 	select EXTCON
 	help
           Say Y to enable charger-manager support, which allows multiple
@@ -327,11 +327,16 @@ config CHARGER_MANAGER
 config CHARGER_MAX14577
 	tristate "Maxim MAX14577/77836 battery charger driver"
 	depends on MFD_MAX14577
-	depends on SYSFS
 	help
 	  Say Y to enable support for the battery charger control sysfs and
 	  platform data of MAX14577/77836 MUICs.
 
+config CHARGER_MAX77693
+	tristate "Maxim MAX77693 battery charger driver"
+	depends on MFD_MAX77693
+	help
+	  Say Y to enable support for the Maxim MAX77693 battery charger.
+
 config CHARGER_MAX8997
 	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
 	depends on MFD_MAX8997 && REGULATOR_MAX8997
@@ -383,6 +388,14 @@ config CHARGER_TPS65090
 	 Say Y here to enable support for battery charging with TPS65090
 	 PMIC chips.
 
+config BATTERY_GAUGE_LTC2941
+	tristate "LTC2941/LTC2943 Battery Gauge Driver"
+	depends on I2C
+	help
+	  Say Y here to include support for LTC2941 and LTC2943 Battery
+	  Gauge IC. The driver reports the charge count continuously, and
+	  measures the voltage and temperature every 10 seconds.
+
 config AB8500_BM
 	bool "AB8500 Battery Management Driver"
 	depends on AB8500_CORE && AB8500_GPADC
@@ -397,6 +410,14 @@ config BATTERY_GOLDFISH
 	  Say Y to enable support for the battery and AC power in the
 	  Goldfish emulator.
 
+config BATTERY_RT5033
+	tristate "RT5033 fuel gauge support"
+	depends on MFD_RT5033
+	help
+	  This adds support for battery fuel gauge in Richtek RT5033 PMIC.
+	  The fuelgauge calculates and determines the battery state of charge
+	  according to battery open circuit voltage.
+
 source "drivers/power/reset/Kconfig"
 
 endif # POWER_SUPPLY

drivers/power/Makefile

@@ -20,6 +20,7 @@ obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
 obj-$(CONFIG_BATTERY_DS2780)	+= ds2780_battery.o
 obj-$(CONFIG_BATTERY_DS2781)	+= ds2781_battery.o
 obj-$(CONFIG_BATTERY_DS2782)	+= ds2782_battery.o
+obj-$(CONFIG_BATTERY_GAUGE_LTC2941)	+= ltc2941-battery-gauge.o
 obj-$(CONFIG_BATTERY_GOLDFISH)	+= goldfish_battery.o
 obj-$(CONFIG_BATTERY_PMU)	+= pmu_battery.o
 obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
@@ -34,6 +35,7 @@ obj-$(CONFIG_BATTERY_DA9052)	+= da9052-battery.o
 obj-$(CONFIG_BATTERY_MAX17040)	+= max17040_battery.o
 obj-$(CONFIG_BATTERY_MAX17042)	+= max17042_battery.o
 obj-$(CONFIG_BATTERY_Z2)	+= z2_battery.o
+obj-$(CONFIG_BATTERY_RT5033)	+= rt5033_battery.o
 obj-$(CONFIG_BATTERY_S3C_ADC)	+= s3c_adc_battery.o
 obj-$(CONFIG_BATTERY_TWL4030_MADC)	+= twl4030_madc_battery.o
 obj-$(CONFIG_CHARGER_88PM860X)	+= 88pm860x_charger.o
@@ -50,6 +52,7 @@ obj-$(CONFIG_CHARGER_LP8788)	+= lp8788-charger.o
 obj-$(CONFIG_CHARGER_GPIO)	+= gpio-charger.o
 obj-$(CONFIG_CHARGER_MANAGER)	+= charger-manager.o
 obj-$(CONFIG_CHARGER_MAX14577)	+= max14577_charger.o
+obj-$(CONFIG_CHARGER_MAX77693)	+= max77693_charger.o
 obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
 obj-$(CONFIG_CHARGER_MAX8998)	+= max8998_charger.o
 obj-$(CONFIG_CHARGER_BQ2415X)	+= bq2415x_charger.o

drivers/power/ab8500_fg.c

@@ -2435,20 +2435,6 @@ static void ab8500_fg_reinit_work(struct work_struct *work)
 	}
 }
 
-/**
- * ab8500_fg_reinit() - forces FG algorithm to reinitialize with current values
- *
- * This function can be used to force the FG algorithm to recalculate a new
- * voltage based battery capacity.
- */
-void ab8500_fg_reinit(void)
-{
-	struct ab8500_fg *di = ab8500_fg_get();
-	/* User won't be notified if a null pointer returned. */
-	if (di != NULL)
-		queue_delayed_work(di->fg_wq, &di->fg_reinit_work, 0);
-}
-
 /* Exposure to the sysfs interface */
 
 struct ab8500_fg_sysfs_entry {

drivers/power/bq24190_charger.c

@@ -929,7 +929,7 @@ static void bq24190_charger_init(struct power_supply *charger)
 	charger->properties = bq24190_charger_properties;
 	charger->num_properties = ARRAY_SIZE(bq24190_charger_properties);
 	charger->supplied_to = bq24190_charger_supplied_to;
-	charger->num_supplies = ARRAY_SIZE(bq24190_charger_supplied_to);
+	charger->num_supplicants = ARRAY_SIZE(bq24190_charger_supplied_to);
 	charger->get_property = bq24190_charger_get_property;
 	charger->set_property = bq24190_charger_set_property;
 	charger->property_is_writeable = bq24190_charger_property_is_writeable;
@@ -1208,7 +1208,7 @@ static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
 {
 	struct bq24190_dev_info *bdi = data;
 	bool alert_userspace = false;
-	u8 ss_reg, f_reg;
+	u8 ss_reg = 0, f_reg = 0;
 	int ret;
 
 	pm_runtime_get_sync(bdi->dev);

drivers/power/bq27x00_battery.c

@@ -76,7 +76,8 @@
 
 /* bq27425 register addresses are same as bq27x00 addresses minus 4 */
 #define BQ27425_REG_OFFSET		0x04
-#define BQ27425_REG_SOC			0x18 /* Register address plus offset */
+#define BQ27425_REG_SOC		(0x1C + BQ27425_REG_OFFSET)
+#define BQ27425_REG_DCAP		(0x3C + BQ27425_REG_OFFSET)
 
 #define BQ27000_RS			20 /* Resistor sense */
 #define BQ27x00_POWER_CONSTANT		(256 * 29200 / 1000)
@@ -282,9 +283,12 @@ static int bq27x00_battery_read_ilmd(struct bq27x00_device_info *di)
 {
 	int ilmd;
 
-	if (bq27xxx_is_chip_version_higher(di))
-		ilmd = bq27x00_read(di, BQ27500_REG_DCAP, false);
-	else
+	if (bq27xxx_is_chip_version_higher(di)) {
+		if (di->chip == BQ27425)
+			ilmd = bq27x00_read(di, BQ27425_REG_DCAP, false);
+		else
+			ilmd = bq27x00_read(di, BQ27500_REG_DCAP, false);
+	} else
 		ilmd = bq27x00_read(di, BQ27000_REG_ILMD, true);
 
 	if (ilmd < 0) {
@@ -493,10 +497,11 @@ static void bq27x00_update(struct bq27x00_device_info *di)
 			di->charge_design_full = bq27x00_battery_read_ilmd(di);
 	}
 
-	if (memcmp(&di->cache, &cache, sizeof(cache)) != 0) {
-		di->cache = cache;
+	if (di->cache.capacity != cache.capacity)
 		power_supply_changed(&di->bat);
-	}
+
+	if (memcmp(&di->cache, &cache, sizeof(cache)) != 0)
+		di->cache = cache;
 
 	di->last_update = jiffies;
 }

drivers/power/charger-manager.c

@@ -69,16 +69,10 @@ static LIST_HEAD(cm_list);
 static DEFINE_MUTEX(cm_list_mtx);
 
 /* About in-suspend (suspend-again) monitoring */
-static struct rtc_device *rtc_dev;
-/*
- * Backup RTC alarm
- * Save the wakeup alarm before entering suspend-to-RAM
- */
-static struct rtc_wkalrm rtc_wkalarm_save;
-/* Backup RTC alarm time in terms of seconds since 01-01-1970 00:00:00 */
-static unsigned long rtc_wkalarm_save_time;
+static struct alarm *cm_timer;
+
 static bool cm_suspended;
-static bool cm_rtc_set;
+static bool cm_timer_set;
 static unsigned long cm_suspend_duration_ms;
 
 /* About normal (not suspended) monitoring */
@@ -87,9 +81,6 @@ static unsigned long next_polling; /* Next appointed polling time */
 static struct workqueue_struct *cm_wq; /* init at driver add */
 static struct delayed_work cm_monitor_work; /* init at driver add */
 
-/* Global charger-manager description */
-static struct charger_global_desc *g_desc; /* init with setup_charger_manager */
-
 /**
  * is_batt_present - See if the battery presents in place.
  * @cm: the Charger Manager representing the battery.
@@ -1047,10 +1038,13 @@ static bool cm_setup_timer(void)
 {
 	struct charger_manager *cm;
 	unsigned int wakeup_ms = UINT_MAX;
-	bool ret = false;
+	int timer_req = 0;
 
-	mutex_lock(&cm_list_mtx);
+	if (time_after(next_polling, jiffies))
+		CM_MIN_VALID(wakeup_ms,
+			jiffies_to_msecs(next_polling - jiffies));
 
+	mutex_lock(&cm_list_mtx);
 	list_for_each_entry(cm, &cm_list, entry) {
 		unsigned int fbchk_ms = 0;
 
@@ -1070,162 +1064,38 @@ static bool cm_setup_timer(void)
 		/* Skip if polling is not required for this CM */
 		if (!is_polling_required(cm) && !cm->emergency_stop)
 			continue;
+		timer_req++;
 		if (cm->desc->polling_interval_ms == 0)
 			continue;
 		CM_MIN_VALID(wakeup_ms, cm->desc->polling_interval_ms);
 	}
-
 	mutex_unlock(&cm_list_mtx);
 
-	if (wakeup_ms < UINT_MAX && wakeup_ms > 0) {
-		pr_info("Charger Manager wakeup timer: %u ms\n", wakeup_ms);
-		if (rtc_dev) {
-			struct rtc_wkalrm tmp;
-			unsigned long time, now;
-			unsigned long add = DIV_ROUND_UP(wakeup_ms, 1000);
-
-			/*
-			 * Set alarm with the polling interval (wakeup_ms)
-			 * except when rtc_wkalarm_save comes first.
-			 * However, the alarm time should be NOW +
-			 * CM_RTC_SMALL or later.
-			 */
-			tmp.enabled = 1;
-			rtc_read_time(rtc_dev, &tmp.time);
-			rtc_tm_to_time(&tmp.time, &now);
-			if (add < CM_RTC_SMALL)
-				add = CM_RTC_SMALL;
-			time = now + add;
+	if (timer_req && cm_timer) {
+		ktime_t now, add;
 
-			ret = true;
+		/*
+		 * Set alarm with the polling interval (wakeup_ms)
+		 * The alarm time should be NOW + CM_RTC_SMALL or later.
+		 */
+		if (wakeup_ms == UINT_MAX ||
+			wakeup_ms < CM_RTC_SMALL * MSEC_PER_SEC)
+			wakeup_ms = 2 * CM_RTC_SMALL * MSEC_PER_SEC;
 
-			if (rtc_wkalarm_save.enabled &&
-			    rtc_wkalarm_save_time &&
-			    rtc_wkalarm_save_time < time) {
-				if (rtc_wkalarm_save_time < now + CM_RTC_SMALL)
-					time = now + CM_RTC_SMALL;
-				else
-					time = rtc_wkalarm_save_time;
+		pr_info("Charger Manager wakeup timer: %u ms\n", wakeup_ms);
 
-				/* The timer is not appointed by CM */
-				ret = false;
-			}
+		now = ktime_get_boottime();
+		add = ktime_set(wakeup_ms / MSEC_PER_SEC,
+				(wakeup_ms % MSEC_PER_SEC) * NSEC_PER_MSEC);
+		alarm_start(cm_timer, ktime_add(now, add));
 
-			pr_info("Waking up after %lu secs\n", time - now);
+		cm_suspend_duration_ms = wakeup_ms;
 
-			rtc_time_to_tm(time, &tmp.time);
-			rtc_set_alarm(rtc_dev, &tmp);
-			cm_suspend_duration_ms += wakeup_ms;
-			return ret;
-		}
+		return true;
 	}
-
-	if (rtc_dev)
-		rtc_set_alarm(rtc_dev, &rtc_wkalarm_save);
 	return false;
 }
 
-static void _cm_fbchk_in_suspend(struct charger_manager *cm)
-{
-	unsigned long jiffy_now = jiffies;
-
-	if (!cm->fullbatt_vchk_jiffies_at)
-		return;
-
-	if (g_desc && g_desc->assume_timer_stops_in_suspend)
-		jiffy_now += msecs_to_jiffies(cm_suspend_duration_ms);
-
-	/* Execute now if it's going to be executed not too long after */
-	jiffy_now += CM_JIFFIES_SMALL;
-
-	if (time_after_eq(jiffy_now, cm->fullbatt_vchk_jiffies_at))
-		fullbatt_vchk(&cm->fullbatt_vchk_work.work);
-}
-
-/**
- * cm_suspend_again - Determine whether suspend again or not
- *
- * Returns true if the system should be suspended again
- * Returns false if the system should be woken up
- */
-bool cm_suspend_again(void)
-{
-	struct charger_manager *cm;
-	bool ret = false;
-
-	if (!g_desc || !g_desc->rtc_only_wakeup || !g_desc->rtc_only_wakeup() ||
-	    !cm_rtc_set)
-		return false;
-
-	if (cm_monitor())
-		goto out;
-
-	ret = true;
-	mutex_lock(&cm_list_mtx);
-	list_for_each_entry(cm, &cm_list, entry) {
-		_cm_fbchk_in_suspend(cm);
-
-		if (cm->status_save_ext_pwr_inserted != is_ext_pwr_online(cm) ||
-		    cm->status_save_batt != is_batt_present(cm)) {
-			ret = false;
-			break;
-		}
-	}
-	mutex_unlock(&cm_list_mtx);
-
-	cm_rtc_set = cm_setup_timer();
-out:
-	/* It's about the time when the non-CM appointed timer goes off */
-	if (rtc_wkalarm_save.enabled) {
-		unsigned long now;
-		struct rtc_time tmp;
-
-		rtc_read_time(rtc_dev, &tmp);
-		rtc_tm_to_time(&tmp, &now);
-
-		if (rtc_wkalarm_save_time &&
-		    now + CM_RTC_SMALL >= rtc_wkalarm_save_time)
-			return false;
-	}
-	return ret;
-}
-EXPORT_SYMBOL_GPL(cm_suspend_again);
-
-/**
- * setup_charger_manager - initialize charger_global_desc data
- * @gd: pointer to instance of charger_global_desc
- */
-int setup_charger_manager(struct charger_global_desc *gd)
-{
-	if (!gd)
-		return -EINVAL;
-
-	if (rtc_dev)
-		rtc_class_close(rtc_dev);
-	rtc_dev = NULL;
-	g_desc = NULL;
-
-	if (!gd->rtc_only_wakeup) {
-		pr_err("The callback rtc_only_wakeup is not given\n");
-		return -EINVAL;
-	}
-
-	if (gd->rtc_name) {
-		rtc_dev = rtc_class_open(gd->rtc_name);
-		if (IS_ERR_OR_NULL(rtc_dev)) {
-			rtc_dev = NULL;
-			/* Retry at probe. RTC may be not registered yet */
-		}
-	} else {
-		pr_warn("No wakeup timer is given for charger manager.  "
-			"In-suspend monitoring won't work.\n");
-	}
-
-	g_desc = gd;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(setup_charger_manager);
-
 /**
  * charger_extcon_work - enable/diable charger according to the state
  *			of charger cable
@@ -1719,6 +1589,12 @@ static inline struct charger_desc *cm_get_drv_data(struct platform_device *pdev)
 	return dev_get_platdata(&pdev->dev);
 }
 
+static enum alarmtimer_restart cm_timer_func(struct alarm *alarm, ktime_t now)
+{
+	cm_timer_set = false;
+	return ALARMTIMER_NORESTART;
+}
+
 static int charger_manager_probe(struct platform_device *pdev)
 {
 	struct charger_desc *desc = cm_get_drv_data(pdev);
@@ -1728,16 +1604,6 @@ static int charger_manager_probe(struct platform_device *pdev)
 	union power_supply_propval val;
 	struct power_supply *fuel_gauge;
 
-	if (g_desc && !rtc_dev && g_desc->rtc_name) {
-		rtc_dev = rtc_class_open(g_desc->rtc_name);
-		if (IS_ERR_OR_NULL(rtc_dev)) {
-			rtc_dev = NULL;
-			dev_err(&pdev->dev, "Cannot get RTC %s\n",
-				g_desc->rtc_name);
-			return -ENODEV;
-		}
-	}
-
 	if (IS_ERR(desc)) {
 		dev_err(&pdev->dev, "No platform data (desc) found\n");
 		return -ENODEV;
@@ -1752,6 +1618,12 @@ static int charger_manager_probe(struct platform_device *pdev)
 	cm->dev = &pdev->dev;
 	cm->desc = desc;
 
+	/* Initialize alarm timer */
+	if (alarmtimer_get_rtcdev()) {
+		cm_timer = devm_kzalloc(cm->dev, sizeof(*cm_timer), GFP_KERNEL);
+		alarm_init(cm_timer, ALARM_BOOTTIME, cm_timer_func);
+	}
+
 	/*
 	 * The following two do not need to be errors.
 	 * Users may intentionally ignore those two features.
@@ -1993,38 +1865,41 @@ static int cm_suspend_noirq(struct device *dev)
 	return ret;
 }
 
+static bool cm_need_to_awake(void)
+{
+	struct charger_manager *cm;
+
+	if (cm_timer)
+		return false;
+
+	mutex_lock(&cm_list_mtx);
+	list_for_each_entry(cm, &cm_list, entry) {
+		if (is_charging(cm)) {
+			mutex_unlock(&cm_list_mtx);
+			return true;
+		}
+	}
+	mutex_unlock(&cm_list_mtx);
+
+	return false;
+}
+
 static int cm_suspend_prepare(struct device *dev)
 {
 	struct charger_manager *cm = dev_get_drvdata(dev);
 
-	if (!cm_suspended) {
-		if (rtc_dev) {
-			struct rtc_time tmp;
-			unsigned long now;
-
-			rtc_read_alarm(rtc_dev, &rtc_wkalarm_save);
-			rtc_read_time(rtc_dev, &tmp);
+	if (cm_need_to_awake())
+		return -EBUSY;
 
-			if (rtc_wkalarm_save.enabled) {
-				rtc_tm_to_time(&rtc_wkalarm_save.time,
-					       &rtc_wkalarm_save_time);
-				rtc_tm_to_time(&tmp, &now);
-				if (now > rtc_wkalarm_save_time)
-					rtc_wkalarm_save_time = 0;
-			} else {
-				rtc_wkalarm_save_time = 0;
-			}
-		}
+	if (!cm_suspended)
 		cm_suspended = true;
-	}
 
-	cancel_delayed_work(&cm->fullbatt_vchk_work);
-	cm->status_save_ext_pwr_inserted = is_ext_pwr_online(cm);
-	cm->status_save_batt = is_batt_present(cm);
+	cm_timer_set = cm_setup_timer();
 
-	if (!cm_rtc_set) {
-		cm_suspend_duration_ms = 0;
-		cm_rtc_set = cm_setup_timer();
+	if (cm_timer_set) {
+		cancel_work_sync(&setup_polling);
+		cancel_delayed_work_sync(&cm_monitor_work);
+		cancel_delayed_work(&cm->fullbatt_vchk_work);
 	}
 
 	return 0;
@@ -2034,18 +1909,21 @@ static void cm_suspend_complete(struct device *dev)
 {
 	struct charger_manager *cm = dev_get_drvdata(dev);
 
-	if (cm_suspended) {
-		if (rtc_dev) {
-			struct rtc_wkalrm tmp;
-
-			rtc_read_alarm(rtc_dev, &tmp);
-			rtc_wkalarm_save.pending = tmp.pending;
-			rtc_set_alarm(rtc_dev, &rtc_wkalarm_save);
-		}
+	if (cm_suspended)
 		cm_suspended = false;
-		cm_rtc_set = false;
+
+	if (cm_timer_set) {
+		ktime_t remain;
+
+		alarm_cancel(cm_timer);
+		cm_timer_set = false;
+		remain = alarm_expires_remaining(cm_timer);
+		cm_suspend_duration_ms -= ktime_to_ms(remain);
+		schedule_work(&setup_polling);
 	}
 
+	_cm_monitor(cm);
+
 	/* Re-enqueue delayed work (fullbatt_vchk_work) */
 	if (cm->fullbatt_vchk_jiffies_at) {
 		unsigned long delay = 0;
@@ -2060,21 +1938,18 @@ static void cm_suspend_complete(struct device *dev)
 		}
 
 		/*
-		 * Account for cm_suspend_duration_ms if
-		 * assume_timer_stops_in_suspend is active
+		 * Account for cm_suspend_duration_ms with assuming that
+		 * timer stops in suspend.
 		 */
-		if (g_desc && g_desc->assume_timer_stops_in_suspend) {
-			if (delay > cm_suspend_duration_ms)
-				delay -= cm_suspend_duration_ms;
-			else
-				delay = 0;
-		}
+		if (delay > cm_suspend_duration_ms)
+			delay -= cm_suspend_duration_ms;
+		else
+			delay = 0;
 
 		queue_delayed_work(cm_wq, &cm->fullbatt_vchk_work,
 				   msecs_to_jiffies(delay));
 	}
 	device_set_wakeup_capable(cm->dev, false);
-	uevent_notify(cm, NULL);
 }
 
 static const struct dev_pm_ops charger_manager_pm = {

drivers/power/collie_battery.c

@@ -26,6 +26,7 @@
 static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
 static struct work_struct bat_work;
 static struct ucb1x00 *ucb;
+static int wakeup_enabled;
 
 struct collie_bat {
 	int status;
@@ -291,11 +292,21 @@ static int collie_bat_suspend(struct ucb1x00_dev *dev)
 {
 	/* flush all pending status updates */
 	flush_work(&bat_work);
+
+	if (device_may_wakeup(&dev->ucb->dev) &&
+	    collie_bat_main.status == POWER_SUPPLY_STATUS_CHARGING)
+		wakeup_enabled = !enable_irq_wake(gpio_to_irq(COLLIE_GPIO_CO));
+	else
+		wakeup_enabled = 0;
+
 	return 0;
 }
 
 static int collie_bat_resume(struct ucb1x00_dev *dev)
 {
+	if (wakeup_enabled)
+		disable_irq_wake(gpio_to_irq(COLLIE_GPIO_CO));
+
 	/* things may have changed while we were away */
 	schedule_work(&bat_work);
 	return 0;
@@ -334,10 +345,15 @@ static int collie_bat_probe(struct ucb1x00_dev *dev)
 				collie_bat_gpio_isr,
 				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				"main full", &collie_bat_main);
-	if (!ret) {
-		schedule_work(&bat_work);
-		return 0;
-	}
+	if (ret)
+		goto err_irq;
+
+	device_init_wakeup(&ucb->dev, 1);
+	schedule_work(&bat_work);
+
+	return 0;
+
+err_irq:
 	power_supply_unregister(&collie_bat_bu.psy);
 err_psy_reg_bu:
 	power_supply_unregister(&collie_bat_main.psy);

drivers/power/gpio-charger.c

@@ -229,7 +229,7 @@ static int gpio_charger_suspend(struct device *dev)
 
 	if (device_may_wakeup(dev))
 		gpio_charger->wakeup_enabled =
-			enable_irq_wake(gpio_charger->irq);
+			!enable_irq_wake(gpio_charger->irq);
 
 	return 0;
 }
@@ -239,7 +239,7 @@ static int gpio_charger_resume(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct gpio_charger *gpio_charger = platform_get_drvdata(pdev);
 
-	if (gpio_charger->wakeup_enabled)
+	if (device_may_wakeup(dev) && gpio_charger->wakeup_enabled)
 		disable_irq_wake(gpio_charger->irq);
 	power_supply_changed(&gpio_charger->charger);
 

drivers/power/ltc2941-battery-gauge.c

+/*
+ * I2C client/driver for the Linear Technology LTC2941 and LTC2943
+ * Battery Gas Gauge IC
+ *
+ * Copyright (C) 2014 Topic Embedded Systems
+ *
+ * Author: Auryn Verwegen
+ * Author: Mike Looijmans
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/swab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/idr.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+#define I16_MSB(x)			((x >> 8) & 0xFF)
+#define I16_LSB(x)			(x & 0xFF)
+
+#define LTC294X_WORK_DELAY		10	/* Update delay in seconds */
+
+#define LTC294X_MAX_VALUE		0xFFFF
+#define LTC294X_MID_SUPPLY		0x7FFF
+
+#define LTC2941_MAX_PRESCALER_EXP	7
+#define LTC2943_MAX_PRESCALER_EXP	6
+
+enum ltc294x_reg {
+	LTC294X_REG_STATUS		= 0x00,
+	LTC294X_REG_CONTROL		= 0x01,
+	LTC294X_REG_ACC_CHARGE_MSB	= 0x02,
+	LTC294X_REG_ACC_CHARGE_LSB	= 0x03,
+	LTC294X_REG_THRESH_HIGH_MSB	= 0x04,
+	LTC294X_REG_THRESH_HIGH_LSB	= 0x05,
+	LTC294X_REG_THRESH_LOW_MSB	= 0x06,
+	LTC294X_REG_THRESH_LOW_LSB	= 0x07,
+	LTC294X_REG_VOLTAGE_MSB	= 0x08,
+	LTC294X_REG_VOLTAGE_LSB	= 0x09,
+	LTC294X_REG_CURRENT_MSB	= 0x0E,
+	LTC294X_REG_CURRENT_LSB	= 0x0F,
+	LTC294X_REG_TEMPERATURE_MSB	= 0x14,
+	LTC294X_REG_TEMPERATURE_LSB	= 0x15,
+};
+
+#define LTC2943_REG_CONTROL_MODE_MASK (BIT(7) | BIT(6))
+#define LTC2943_REG_CONTROL_MODE_SCAN BIT(7)
+#define LTC294X_REG_CONTROL_PRESCALER_MASK	(BIT(5) | BIT(4) | BIT(3))
+#define LTC294X_REG_CONTROL_SHUTDOWN_MASK	(BIT(0))
+#define LTC294X_REG_CONTROL_PRESCALER_SET(x) \
+	((x << 3) & LTC294X_REG_CONTROL_PRESCALER_MASK)
+#define LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED	0
+
+#define LTC2941_NUM_REGS	0x08
+#define LTC2943_NUM_REGS	0x18
+
+struct ltc294x_info {
+	struct i2c_client *client;	/* I2C Client pointer */
+	struct power_supply supply;	/* Supply pointer */
+	struct delayed_work work;	/* Work scheduler */
+	int num_regs;	/* Number of registers (chip type) */
+	int id;		/* Identifier of ltc294x chip */
+	int charge;	/* Last charge register content */
+	int r_sense;	/* mOhm */
+	int Qlsb;	/* nAh */
+};
+
+static DEFINE_IDR(ltc294x_id);
+static DEFINE_MUTEX(ltc294x_lock);
+
+static inline int convert_bin_to_uAh(
+	const struct ltc294x_info *info, int Q)
+{
+	return ((Q * (info->Qlsb / 10))) / 100;
+}
+
+static inline int convert_uAh_to_bin(
+	const struct ltc294x_info *info, int uAh)
+{
+	int Q;
+
+	Q = (uAh * 100) / (info->Qlsb/10);
+	return (Q < LTC294X_MAX_VALUE) ? Q : LTC294X_MAX_VALUE;
+}
+
+static int ltc294x_read_regs(struct i2c_client *client,
+	enum ltc294x_reg reg, u8 *buf, int num_regs)
+{
+	int ret;
+	struct i2c_msg msgs[2] = { };
+	u8 reg_start = reg;
+
+	msgs[0].addr	= client->addr;
+	msgs[0].len	= 1;
+	msgs[0].buf	= &reg_start;
+
+	msgs[1].addr	= client->addr;
+	msgs[1].len	= num_regs;
+	msgs[1].buf	= buf;
+	msgs[1].flags	= I2C_M_RD;
+
+	ret = i2c_transfer(client->adapter, &msgs[0], 2);
+	if (ret < 0) {
+		dev_err(&client->dev, "ltc2941 read_reg failed!\n");
+		return ret;
+	}
+
+	dev_dbg(&client->dev, "%s (%#x, %d) -> %#x\n",
+		__func__, reg, num_regs, *buf);
+
+	return 0;
+}
+
+static int ltc294x_write_regs(struct i2c_client *client,
+	enum ltc294x_reg reg, const u8 *buf, int num_regs)
+{
+	int ret;
+	u8 reg_start = reg;
+
+	ret = i2c_smbus_write_i2c_block_data(client, reg_start, num_regs, buf);
+	if (ret < 0) {
+		dev_err(&client->dev, "ltc2941 write_reg failed!\n");
+		return ret;
+	}
+
+	dev_dbg(&client->dev, "%s (%#x, %d) -> %#x\n",
+		__func__, reg, num_regs, *buf);
+
+	return 0;
+}
+
+static int ltc294x_reset(const struct ltc294x_info *info, int prescaler_exp)
+{
+	int ret;
+	u8 value;
+	u8 control;
+
+	/* Read status and control registers */
+	ret = ltc294x_read_regs(info->client, LTC294X_REG_CONTROL, &value, 1);
+	if (ret < 0) {
+		dev_err(&info->client->dev,
+			"Could not read registers from device\n");
+		goto error_exit;
+	}
+
+	control = LTC294X_REG_CONTROL_PRESCALER_SET(prescaler_exp) |
+				LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED;
+	/* Put the 2943 into "monitor" mode, so it measures every 10 sec */
+	if (info->num_regs == LTC2943_NUM_REGS)
+		control |= LTC2943_REG_CONTROL_MODE_SCAN;
+
+	if (value != control) {
+		ret = ltc294x_write_regs(info->client,
+			LTC294X_REG_CONTROL, &control, 1);
+		if (ret < 0) {
+			dev_err(&info->client->dev,
+				"Could not write register\n");
+			goto error_exit;
+		}
+	}
+
+	return 0;
+
+error_exit:
+	return ret;
+}
+
+static int ltc294x_read_charge_register(const struct ltc294x_info *info)
+{
+	int ret;
+	u8 datar[2];
+
+	ret = ltc294x_read_regs(info->client,
+		LTC294X_REG_ACC_CHARGE_MSB, &datar[0], 2);
+	if (ret < 0)
+		return ret;
+	return (datar[0] << 8) + datar[1];
+}
+
+static int ltc294x_get_charge_now(const struct ltc294x_info *info, int *val)
+{
+	int value = ltc294x_read_charge_register(info);
+
+	if (value < 0)
+		return value;
+	/* When r_sense < 0, this counts up when the battery discharges */
+	if (info->Qlsb < 0)
+		value -= 0xFFFF;
+	*val = convert_bin_to_uAh(info, value);
+	return 0;
+}
+
+static int ltc294x_set_charge_now(const struct ltc294x_info *info, int val)
+{
+	int ret;
+	u8 dataw[2];
+	u8 ctrl_reg;
+	s32 value;
+
+	value = convert_uAh_to_bin(info, val);
+	/* Direction depends on how sense+/- were connected */
+	if (info->Qlsb < 0)
+		value += 0xFFFF;
+	if ((value < 0) || (value > 0xFFFF)) /* input validation */
+		return -EINVAL;
+
+	/* Read control register */
+	ret = ltc294x_read_regs(info->client,
+		LTC294X_REG_CONTROL, &ctrl_reg, 1);
+	if (ret < 0)
+		return ret;
+	/* Disable analog section */
+	ctrl_reg |= LTC294X_REG_CONTROL_SHUTDOWN_MASK;
+	ret = ltc294x_write_regs(info->client,
+		LTC294X_REG_CONTROL, &ctrl_reg, 1);
+	if (ret < 0)
+		return ret;
+	/* Set new charge value */
+	dataw[0] = I16_MSB(value);
+	dataw[1] = I16_LSB(value);
+	ret = ltc294x_write_regs(info->client,
+		LTC294X_REG_ACC_CHARGE_MSB, &dataw[0], 2);
+	if (ret < 0)
+		goto error_exit;
+	/* Enable analog section */
+error_exit:
+	ctrl_reg &= ~LTC294X_REG_CONTROL_SHUTDOWN_MASK;
+	ret = ltc294x_write_regs(info->client,
+		LTC294X_REG_CONTROL, &ctrl_reg, 1);
+
+	return ret < 0 ? ret : 0;
+}
+
+static int ltc294x_get_charge_counter(
+	const struct ltc294x_info *info, int *val)
+{
+	int value = ltc294x_read_charge_register(info);
+
+	if (value < 0)
+		return value;
+	value -= LTC294X_MID_SUPPLY;
+	*val = convert_bin_to_uAh(info, value);
+	return 0;
+}
+
+static int ltc294x_get_voltage(const struct ltc294x_info *info, int *val)
+{
+	int ret;
+	u8 datar[2];
+	u32 value;
+
+	ret = ltc294x_read_regs(info->client,
+		LTC294X_REG_VOLTAGE_MSB, &datar[0], 2);
+	value = (datar[0] << 8) | datar[1];
+	*val = ((value * 23600) / 0xFFFF) * 1000; /* in uV */
+	return ret;
+}
+
+static int ltc294x_get_current(const struct ltc294x_info *info, int *val)
+{
+	int ret;
+	u8 datar[2];
+	s32 value;
+
+	ret = ltc294x_read_regs(info->client,
+		LTC294X_REG_CURRENT_MSB, &datar[0], 2);
+	value = (datar[0] << 8) | datar[1];
+	value -= 0x7FFF;
+	/* Value is in range -32k..+32k, r_sense is usually 10..50 mOhm,
+	 * the formula below keeps everything in s32 range while preserving
+	 * enough digits */
+	*val = 1000 * ((60000 * value) / (info->r_sense * 0x7FFF)); /* in uA */
+	return ret;
+}
+
+static int ltc294x_get_temperature(const struct ltc294x_info *info, int *val)
+{
+	int ret;
+	u8 datar[2];
+	u32 value;
+
+	ret = ltc294x_read_regs(info->client,
+		LTC294X_REG_TEMPERATURE_MSB, &datar[0], 2);
+	value = (datar[0] << 8) | datar[1];
+	/* Full-scale is 510 Kelvin, convert to centidegrees  */
+	*val = (((51000 * value) / 0xFFFF) - 27215);
+	return ret;
+}
+
+static int ltc294x_get_property(struct power_supply *psy,
+				enum power_supply_property prop,
+				union power_supply_propval *val)
+{
+	struct ltc294x_info *info =
+		container_of(psy, struct ltc294x_info, supply);
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		return ltc294x_get_charge_now(info, &val->intval);
+	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+		return ltc294x_get_charge_counter(info, &val->intval);
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		return ltc294x_get_voltage(info, &val->intval);
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		return ltc294x_get_current(info, &val->intval);
+	case POWER_SUPPLY_PROP_TEMP:
+		return ltc294x_get_temperature(info, &val->intval);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ltc294x_set_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	const union power_supply_propval *val)
+{
+	struct ltc294x_info *info =
+		container_of(psy, struct ltc294x_info, supply);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		return ltc294x_set_charge_now(info, val->intval);
+	default:
+		return -EPERM;
+	}
+}
+
+static int ltc294x_property_is_writeable(
+	struct power_supply *psy, enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static void ltc294x_update(struct ltc294x_info *info)
+{
+	int charge = ltc294x_read_charge_register(info);
+
+	if (charge != info->charge) {
+		info->charge = charge;
+		power_supply_changed(&info->supply);
+	}
+}
+
+static void ltc294x_work(struct work_struct *work)
+{
+	struct ltc294x_info *info;
+
+	info = container_of(work, struct ltc294x_info, work.work);
+	ltc294x_update(info);
+	schedule_delayed_work(&info->work, LTC294X_WORK_DELAY * HZ);
+}
+
+static enum power_supply_property ltc294x_properties[] = {
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static int ltc294x_i2c_remove(struct i2c_client *client)
+{
+	struct ltc294x_info *info = i2c_get_clientdata(client);
+
+	cancel_delayed_work(&info->work);
+	power_supply_unregister(&info->supply);
+	kfree(info->supply.name);
+	mutex_lock(&ltc294x_lock);
+	idr_remove(&ltc294x_id, info->id);
+	mutex_unlock(&ltc294x_lock);
+	return 0;
+}
+
+static int ltc294x_i2c_probe(struct i2c_client *client,
+	const struct i2c_device_id *id)
+{
+	struct ltc294x_info *info;
+	int ret;
+	int num;
+	u32 prescaler_exp;
+	s32 r_sense;
+	struct device_node *np;
+
+	mutex_lock(&ltc294x_lock);
+	ret = idr_alloc(&ltc294x_id, client, 0, 0, GFP_KERNEL);
+	mutex_unlock(&ltc294x_lock);
+	if (ret < 0)
+		goto fail_id;
+
+	num = ret;
+
+	info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL);
+	if (info == NULL) {
+		ret = -ENOMEM;
+		goto fail_info;
+	}
+
+	i2c_set_clientdata(client, info);
+
+	info->num_regs = id->driver_data;
+	info->supply.name = kasprintf(GFP_KERNEL, "%s-%d", client->name, num);
+	if (!info->supply.name) {
+		ret = -ENOMEM;
+		goto fail_name;
+	}
+
+	np = of_node_get(client->dev.of_node);
+
+	/* r_sense can be negative, when sense+ is connected to the battery
+	 * instead of the sense-. This results in reversed measurements. */
+	ret = of_property_read_u32(np, "lltc,resistor-sense", &r_sense);
+	if (ret < 0) {
+		dev_err(&client->dev,
+			"Could not find lltc,resistor-sense in devicetree\n");
+		goto fail_name;
+	}
+	info->r_sense = r_sense;
+
+	ret = of_property_read_u32(np, "lltc,prescaler-exponent",
+		&prescaler_exp);
+	if (ret < 0) {
+		dev_warn(&client->dev,
+			"lltc,prescaler-exponent not in devicetree\n");
+		prescaler_exp = LTC2941_MAX_PRESCALER_EXP;
+	}
+
+	if (info->num_regs == LTC2943_NUM_REGS) {
+		if (prescaler_exp > LTC2943_MAX_PRESCALER_EXP)
+			prescaler_exp = LTC2943_MAX_PRESCALER_EXP;
+		info->Qlsb = ((340 * 50000) / r_sense) /
+				(4096 / (1 << (2*prescaler_exp)));
+	} else {
+		if (prescaler_exp > LTC2941_MAX_PRESCALER_EXP)
+			prescaler_exp = LTC2941_MAX_PRESCALER_EXP;
+		info->Qlsb = ((58 * 50000) / r_sense) /
+				(128 / (1 << prescaler_exp));
+	}
+
+	info->client = client;
+	info->id = num;
+	info->supply.type = POWER_SUPPLY_TYPE_BATTERY;
+	info->supply.properties = ltc294x_properties;
+	if (info->num_regs >= LTC294X_REG_TEMPERATURE_LSB)
+		info->supply.num_properties =
+			ARRAY_SIZE(ltc294x_properties);
+	else if (info->num_regs >= LTC294X_REG_CURRENT_LSB)
+		info->supply.num_properties =
+			ARRAY_SIZE(ltc294x_properties) - 1;
+	else if (info->num_regs >= LTC294X_REG_VOLTAGE_LSB)
+		info->supply.num_properties =
+			ARRAY_SIZE(ltc294x_properties) - 2;
+	else
+		info->supply.num_properties =
+			ARRAY_SIZE(ltc294x_properties) - 3;
+	info->supply.get_property = ltc294x_get_property;
+	info->supply.set_property = ltc294x_set_property;
+	info->supply.property_is_writeable = ltc294x_property_is_writeable;
+	info->supply.external_power_changed	= NULL;
+
+	INIT_DELAYED_WORK(&info->work, ltc294x_work);
+
+	ret = ltc294x_reset(info, prescaler_exp);
+	if (ret < 0) {
+		dev_err(&client->dev, "Communication with chip failed\n");
+		goto fail_comm;
+	}
+
+	ret = power_supply_register(&client->dev, &info->supply);
+	if (ret) {
+		dev_err(&client->dev, "failed to register ltc2941\n");
+		goto fail_register;
+	} else {
+		schedule_delayed_work(&info->work, LTC294X_WORK_DELAY * HZ);
+	}
+
+	return 0;
+
+fail_register:
+	kfree(info->supply.name);
+fail_comm:
+fail_name:
+fail_info:
+	mutex_lock(&ltc294x_lock);
+	idr_remove(&ltc294x_id, num);
+	mutex_unlock(&ltc294x_lock);
+fail_id:
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int ltc294x_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ltc294x_info *info = i2c_get_clientdata(client);
+
+	cancel_delayed_work(&info->work);
+	return 0;
+}
+
+static int ltc294x_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ltc294x_info *info = i2c_get_clientdata(client);
+
+	schedule_delayed_work(&info->work, LTC294X_WORK_DELAY * HZ);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ltc294x_pm_ops, ltc294x_suspend, ltc294x_resume);
+#define LTC294X_PM_OPS (&ltc294x_pm_ops)
+
+#else
+#define LTC294X_PM_OPS NULL
+#endif /* CONFIG_PM_SLEEP */
+
+
+static const struct i2c_device_id ltc294x_i2c_id[] = {
+	{"ltc2941", LTC2941_NUM_REGS},
+	{"ltc2943", LTC2943_NUM_REGS},
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, ltc294x_i2c_id);
+
+static struct i2c_driver ltc294x_driver = {
+	.driver = {
+		.name	= "LTC2941",
+		.pm	= LTC294X_PM_OPS,
+	},
+	.probe		= ltc294x_i2c_probe,
+	.remove		= ltc294x_i2c_remove,
+	.id_table	= ltc294x_i2c_id,
+};
+module_i2c_driver(ltc294x_driver);
+
+MODULE_AUTHOR("Auryn Verwegen, Topic Embedded Systems");
+MODULE_AUTHOR("Mike Looijmans, Topic Embedded Products");
+MODULE_DESCRIPTION("LTC2941/LTC2943 Battery Gas Gauge IC driver");
+MODULE_LICENSE("GPL");

drivers/power/max17042_battery.c

@@ -658,7 +658,7 @@ max17042_get_pdata(struct device *dev)
 }
 #endif
 
-static struct regmap_config max17042_regmap_config = {
+static const struct regmap_config max17042_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 16,
 	.val_format_endian = REGMAP_ENDIAN_NATIVE,

drivers/power/max77693_charger.c

+/*
+ * max77693_charger.c - Battery charger driver for the Maxim 77693
+ *
+ * Copyright (C) 2014 Samsung Electronics
+ * Krzysztof Kozlowski <k.kozlowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/mfd/max77693.h>
+#include <linux/mfd/max77693-private.h>
+
+static const char *max77693_charger_name		= "max77693-charger";
+static const char *max77693_charger_model		= "MAX77693";
+static const char *max77693_charger_manufacturer	= "Maxim Integrated";
+
+struct max77693_charger {
+	struct device		*dev;
+	struct max77693_dev	*max77693;
+	struct power_supply	charger;
+
+	u32 constant_volt;
+	u32 min_system_volt;
+	u32 thermal_regulation_temp;
+	u32 batttery_overcurrent;
+	u32 charge_input_threshold_volt;
+};
+
+static int max77693_get_charger_state(struct regmap *regmap)
+{
+	int state;
+	unsigned int data;
+
+	if (regmap_read(regmap, MAX77693_CHG_REG_CHG_DETAILS_01, &data) < 0)
+		return POWER_SUPPLY_STATUS_UNKNOWN;
+
+	data &= CHG_DETAILS_01_CHG_MASK;
+	data >>= CHG_DETAILS_01_CHG_SHIFT;
+
+	switch (data) {
+	case MAX77693_CHARGING_PREQUALIFICATION:
+	case MAX77693_CHARGING_FAST_CONST_CURRENT:
+	case MAX77693_CHARGING_FAST_CONST_VOLTAGE:
+	case MAX77693_CHARGING_TOP_OFF:
+	/* In high temp the charging current is reduced, but still charging */
+	case MAX77693_CHARGING_HIGH_TEMP:
+		state = POWER_SUPPLY_STATUS_CHARGING;
+		break;
+	case MAX77693_CHARGING_DONE:
+		state = POWER_SUPPLY_STATUS_FULL;
+		break;
+	case MAX77693_CHARGING_TIMER_EXPIRED:
+	case MAX77693_CHARGING_THERMISTOR_SUSPEND:
+		state = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	case MAX77693_CHARGING_OFF:
+	case MAX77693_CHARGING_OVER_TEMP:
+	case MAX77693_CHARGING_WATCHDOG_EXPIRED:
+		state = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	case MAX77693_CHARGING_RESERVED:
+	default:
+		state = POWER_SUPPLY_STATUS_UNKNOWN;
+	}
+
+	return state;
+}
+
+static int max77693_get_charge_type(struct regmap *regmap)
+{
+	int state;
+	unsigned int data;
+
+	if (regmap_read(regmap, MAX77693_CHG_REG_CHG_DETAILS_01, &data) < 0)
+		return POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+
+	data &= CHG_DETAILS_01_CHG_MASK;
+	data >>= CHG_DETAILS_01_CHG_SHIFT;
+
+	switch (data) {
+	case MAX77693_CHARGING_PREQUALIFICATION:
+	/*
+	 * Top-off: trickle or fast? In top-off the current varies between
+	 * 100 and 250 mA. It is higher than prequalification current.
+	 */
+	case MAX77693_CHARGING_TOP_OFF:
+		state = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+		break;
+	case MAX77693_CHARGING_FAST_CONST_CURRENT:
+	case MAX77693_CHARGING_FAST_CONST_VOLTAGE:
+	/* In high temp the charging current is reduced, but still charging */
+	case MAX77693_CHARGING_HIGH_TEMP:
+		state = POWER_SUPPLY_CHARGE_TYPE_FAST;
+		break;
+	case MAX77693_CHARGING_DONE:
+	case MAX77693_CHARGING_TIMER_EXPIRED:
+	case MAX77693_CHARGING_THERMISTOR_SUSPEND:
+	case MAX77693_CHARGING_OFF:
+	case MAX77693_CHARGING_OVER_TEMP:
+	case MAX77693_CHARGING_WATCHDOG_EXPIRED:
+		state = POWER_SUPPLY_CHARGE_TYPE_NONE;
+		break;
+	case MAX77693_CHARGING_RESERVED:
+	default:
+		state = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+	}
+
+	return state;
+}
+
+/*
+ * Supported health statuses:
+ *  - POWER_SUPPLY_HEALTH_DEAD
+ *  - POWER_SUPPLY_HEALTH_GOOD
+ *  - POWER_SUPPLY_HEALTH_OVERVOLTAGE
+ *  - POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE
+ *  - POWER_SUPPLY_HEALTH_UNKNOWN
+ *  - POWER_SUPPLY_HEALTH_UNSPEC_FAILURE
+ */
+static int max77693_get_battery_health(struct regmap *regmap)
+{
+	int state;
+	unsigned int data;
+
+	if (regmap_read(regmap, MAX77693_CHG_REG_CHG_DETAILS_01, &data) < 0)
+		return POWER_SUPPLY_HEALTH_UNKNOWN;
+
+	data &= CHG_DETAILS_01_BAT_MASK;
+	data >>= CHG_DETAILS_01_BAT_SHIFT;
+
+	switch (data) {
+	case MAX77693_BATTERY_NOBAT:
+		state = POWER_SUPPLY_HEALTH_DEAD;
+		break;
+	case MAX77693_BATTERY_PREQUALIFICATION:
+	case MAX77693_BATTERY_GOOD:
+	case MAX77693_BATTERY_LOWVOLTAGE:
+		state = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+	case MAX77693_BATTERY_TIMER_EXPIRED:
+		/*
+		 * Took longer to charge than expected, charging suspended.
+		 * Damaged battery?
+		 */
+		state = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+		break;
+	case MAX77693_BATTERY_OVERVOLTAGE:
+		state = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		break;
+	case MAX77693_BATTERY_OVERCURRENT:
+		state = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		break;
+	case MAX77693_BATTERY_RESERVED:
+	default:
+		state = POWER_SUPPLY_HEALTH_UNKNOWN;
+		break;
+	}
+
+	return state;
+}
+
+static int max77693_get_present(struct regmap *regmap)
+{
+	unsigned int data;
+
+	/*
+	 * Read CHG_INT_OK register. High DETBAT bit here should be
+	 * equal to value 0x0 in CHG_DETAILS_01/BAT field.
+	 */
+	regmap_read(regmap, MAX77693_CHG_REG_CHG_INT_OK, &data);
+	if (data & CHG_INT_OK_DETBAT_MASK)
+		return 0;
+	return 1;
+}
+
+static int max77693_get_online(struct regmap *regmap)
+{
+	unsigned int data;
+
+	regmap_read(regmap, MAX77693_CHG_REG_CHG_INT_OK, &data);
+	if (data & CHG_INT_OK_CHGIN_MASK)
+		return 1;
+	return 0;
+}
+
+static enum power_supply_property max77693_charger_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static int max77693_charger_get_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	struct max77693_charger *chg = container_of(psy,
+						  struct max77693_charger,
+						  charger);
+	struct regmap *regmap = chg->max77693->regmap;
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = max77693_get_charger_state(regmap);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		val->intval = max77693_get_charge_type(regmap);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		val->intval = max77693_get_battery_health(regmap);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = max77693_get_present(regmap);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = max77693_get_online(regmap);
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = max77693_charger_model;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = max77693_charger_manufacturer;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static ssize_t device_attr_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count,
+		int (*fn)(struct max77693_charger *, unsigned long))
+{
+	struct max77693_charger *chg = dev_get_drvdata(dev);
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	ret = fn(chg, val);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static ssize_t fast_charge_timer_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct max77693_charger *chg = dev_get_drvdata(dev);
+	unsigned int data, val;
+	int ret;
+
+	ret = regmap_read(chg->max77693->regmap, MAX77693_CHG_REG_CHG_CNFG_01,
+			&data);
+	if (ret < 0)
+		return ret;
+
+	data &= CHG_CNFG_01_FCHGTIME_MASK;
+	data >>= CHG_CNFG_01_FCHGTIME_SHIFT;
+	switch (data) {
+	case 0x1 ... 0x7:
+		/* Starting from 4 hours, step by 2 hours */
+		val = 4 + (data - 1) * 2;
+		break;
+	case 0x0:
+	default:
+		val = 0;
+		break;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static int max77693_set_fast_charge_timer(struct max77693_charger *chg,
+		unsigned long hours)
+{
+	unsigned int data;
+
+	/*
+	 * 0x00 - disable
+	 * 0x01 - 4h
+	 * 0x02 - 6h
+	 * ...
+	 * 0x07 - 16h
+	 * Round down odd values.
+	 */
+	switch (hours) {
+	case 4 ... 16:
+		data = (hours - 4) / 2 + 1;
+		break;
+	case 0:
+		/* Disable */
+		data = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+	data <<= CHG_CNFG_01_FCHGTIME_SHIFT;
+
+	return regmap_update_bits(chg->max77693->regmap,
+			MAX77693_CHG_REG_CHG_CNFG_01,
+			CHG_CNFG_01_FCHGTIME_MASK, data);
+}
+
+static ssize_t fast_charge_timer_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	return device_attr_store(dev, attr, buf, count,
+			max77693_set_fast_charge_timer);
+}
+
+static ssize_t top_off_threshold_current_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct max77693_charger *chg = dev_get_drvdata(dev);
+	unsigned int data, val;
+	int ret;
+
+	ret = regmap_read(chg->max77693->regmap, MAX77693_CHG_REG_CHG_CNFG_03,
+			&data);
+	if (ret < 0)
+		return ret;
+
+	data &= CHG_CNFG_03_TOITH_MASK;
+	data >>= CHG_CNFG_03_TOITH_SHIFT;
+
+	if (data <= 0x04)
+		val = 100000 + data * 25000;
+	else
+		val = data * 50000;
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static int max77693_set_top_off_threshold_current(struct max77693_charger *chg,
+		unsigned long uamp)
+{
+	unsigned int data;
+
+	if (uamp < 100000 || uamp > 350000)
+		return -EINVAL;
+
+	if (uamp <= 200000)
+		data = (uamp - 100000) / 25000;
+	else
+		/* (200000, 350000> */
+		data = uamp / 50000;
+
+	data <<= CHG_CNFG_03_TOITH_SHIFT;
+
+	return regmap_update_bits(chg->max77693->regmap,
+			MAX77693_CHG_REG_CHG_CNFG_03,
+			CHG_CNFG_03_TOITH_MASK, data);
+}
+
+static ssize_t top_off_threshold_current_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	return device_attr_store(dev, attr, buf, count,
+			max77693_set_top_off_threshold_current);
+}
+
+static ssize_t top_off_timer_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct max77693_charger *chg = dev_get_drvdata(dev);
+	unsigned int data, val;
+	int ret;
+
+	ret = regmap_read(chg->max77693->regmap, MAX77693_CHG_REG_CHG_CNFG_03,
+			&data);
+	if (ret < 0)
+		return ret;
+
+	data &= CHG_CNFG_03_TOTIME_MASK;
+	data >>= CHG_CNFG_03_TOTIME_SHIFT;
+
+	val = data * 10;
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static int max77693_set_top_off_timer(struct max77693_charger *chg,
+		unsigned long minutes)
+{
+	unsigned int data;
+
+	if (minutes > 70)
+		return -EINVAL;
+
+	data = minutes / 10;
+	data <<= CHG_CNFG_03_TOTIME_SHIFT;
+
+	return regmap_update_bits(chg->max77693->regmap,
+			MAX77693_CHG_REG_CHG_CNFG_03,
+			CHG_CNFG_03_TOTIME_MASK, data);
+}
+
+static ssize_t top_off_timer_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	return device_attr_store(dev, attr, buf, count,
+			max77693_set_top_off_timer);
+}
+
+static DEVICE_ATTR_RW(fast_charge_timer);
+static DEVICE_ATTR_RW(top_off_threshold_current);
+static DEVICE_ATTR_RW(top_off_timer);
+
+static int max77693_set_constant_volt(struct max77693_charger *chg,
+		unsigned int uvolt)
+{
+	unsigned int data;
+
+	/*
+	 * 0x00 - 3.650 V
+	 * 0x01 - 3.675 V
+	 * ...
+	 * 0x1b - 4.325 V
+	 * 0x1c - 4.340 V
+	 * 0x1d - 4.350 V
+	 * 0x1e - 4.375 V
+	 * 0x1f - 4.400 V
+	 */
+	if (uvolt >= 3650000 && uvolt < 4340000)
+		data = (uvolt - 3650000) / 25000;
+	else if (uvolt >= 4340000 && uvolt < 4350000)
+		data = 0x1c;
+	else if (uvolt >= 4350000 && uvolt <= 4400000)
+		data = 0x1d + (uvolt - 4350000) / 25000;
+	else {
+		dev_err(chg->dev, "Wrong value for charging constant voltage\n");
+		return -EINVAL;
+	}
+
+	data <<= CHG_CNFG_04_CHGCVPRM_SHIFT;
+
+	dev_dbg(chg->dev, "Charging constant voltage: %u (0x%x)\n", uvolt,
+			data);
+
+	return regmap_update_bits(chg->max77693->regmap,
+			MAX77693_CHG_REG_CHG_CNFG_04,
+			CHG_CNFG_04_CHGCVPRM_MASK, data);
+}
+
+static int max77693_set_min_system_volt(struct max77693_charger *chg,
+		unsigned int uvolt)
+{
+	unsigned int data;
+
+	if (uvolt < 3000000 || uvolt > 3700000) {
+		dev_err(chg->dev, "Wrong value for minimum system regulation voltage\n");
+		return -EINVAL;
+	}
+
+	data = (uvolt - 3000000) / 100000;
+
+	data <<= CHG_CNFG_04_MINVSYS_SHIFT;
+
+	dev_dbg(chg->dev, "Minimum system regulation voltage: %u (0x%x)\n",
+			uvolt, data);
+
+	return regmap_update_bits(chg->max77693->regmap,
+			MAX77693_CHG_REG_CHG_CNFG_04,
+			CHG_CNFG_04_MINVSYS_MASK, data);
+}
+
+static int max77693_set_thermal_regulation_temp(struct max77693_charger *chg,
+		unsigned int cels)
+{
+	unsigned int data;
+
+	switch (cels) {
+	case 70:
+	case 85:
+	case 100:
+	case 115:
+		data = (cels - 70) / 15;
+		break;
+	default:
+		dev_err(chg->dev, "Wrong value for thermal regulation loop temperature\n");
+		return -EINVAL;
+	}
+
+	data <<= CHG_CNFG_07_REGTEMP_SHIFT;
+
+	dev_dbg(chg->dev, "Thermal regulation loop temperature: %u (0x%x)\n",
+			cels, data);
+
+	return regmap_update_bits(chg->max77693->regmap,
+			MAX77693_CHG_REG_CHG_CNFG_07,
+			CHG_CNFG_07_REGTEMP_MASK, data);
+}
+
+static int max77693_set_batttery_overcurrent(struct max77693_charger *chg,
+		unsigned int uamp)
+{
+	unsigned int data;
+
+	if (uamp && (uamp < 2000000 || uamp > 3500000)) {
+		dev_err(chg->dev, "Wrong value for battery overcurrent\n");
+		return -EINVAL;
+	}
+
+	if (uamp)
+		data = ((uamp - 2000000) / 250000) + 1;
+	else
+		data = 0; /* disable */
+
+	data <<= CHG_CNFG_12_B2SOVRC_SHIFT;
+
+	dev_dbg(chg->dev, "Battery overcurrent: %u (0x%x)\n", uamp, data);
+
+	return regmap_update_bits(chg->max77693->regmap,
+			MAX77693_CHG_REG_CHG_CNFG_12,
+			CHG_CNFG_12_B2SOVRC_MASK, data);
+}
+
+static int max77693_set_charge_input_threshold_volt(struct max77693_charger *chg,
+		unsigned int uvolt)
+{
+	unsigned int data;
+
+	switch (uvolt) {
+	case 4300000:
+		data = 0x0;
+		break;
+	case 4700000:
+	case 4800000:
+	case 4900000:
+		data = (uvolt - 4700000) / 100000;
+	default:
+		dev_err(chg->dev, "Wrong value for charge input voltage regulation threshold\n");
+		return -EINVAL;
+	}
+
+	data <<= CHG_CNFG_12_VCHGINREG_SHIFT;
+
+	dev_dbg(chg->dev, "Charge input voltage regulation threshold: %u (0x%x)\n",
+			uvolt, data);
+
+	return regmap_update_bits(chg->max77693->regmap,
+			MAX77693_CHG_REG_CHG_CNFG_12,
+			CHG_CNFG_12_VCHGINREG_MASK, data);
+}
+
+/*
+ * Sets charger registers to proper and safe default values.
+ */
+static int max77693_reg_init(struct max77693_charger *chg)
+{
+	int ret;
+	unsigned int data;
+
+	/* Unlock charger register protection */
+	data = (0x3 << CHG_CNFG_06_CHGPROT_SHIFT);
+	ret = regmap_update_bits(chg->max77693->regmap,
+				MAX77693_CHG_REG_CHG_CNFG_06,
+				CHG_CNFG_06_CHGPROT_MASK, data);
+	if (ret) {
+		dev_err(chg->dev, "Error unlocking registers: %d\n", ret);
+		return ret;
+	}
+
+	ret = max77693_set_fast_charge_timer(chg, DEFAULT_FAST_CHARGE_TIMER);
+	if (ret)
+		return ret;
+
+	ret = max77693_set_top_off_threshold_current(chg,
+			DEFAULT_TOP_OFF_THRESHOLD_CURRENT);
+	if (ret)
+		return ret;
+
+	ret = max77693_set_top_off_timer(chg, DEFAULT_TOP_OFF_TIMER);
+	if (ret)
+		return ret;
+
+	ret = max77693_set_constant_volt(chg, chg->constant_volt);
+	if (ret)
+		return ret;
+
+	ret = max77693_set_min_system_volt(chg, chg->min_system_volt);
+	if (ret)
+		return ret;
+
+	ret = max77693_set_thermal_regulation_temp(chg,
+			chg->thermal_regulation_temp);
+	if (ret)
+		return ret;
+
+	ret = max77693_set_batttery_overcurrent(chg, chg->batttery_overcurrent);
+	if (ret)
+		return ret;
+
+	return max77693_set_charge_input_threshold_volt(chg,
+			chg->charge_input_threshold_volt);
+}
+
+#ifdef CONFIG_OF
+static int max77693_dt_init(struct device *dev, struct max77693_charger *chg)
+{
+	struct device_node *np = dev->of_node;
+
+	if (!np) {
+		dev_err(dev, "no charger OF node\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32(np, "maxim,constant-microvolt",
+			&chg->constant_volt))
+		chg->constant_volt = DEFAULT_CONSTANT_VOLT;
+
+	if (of_property_read_u32(np, "maxim,min-system-microvolt",
+			&chg->min_system_volt))
+		chg->min_system_volt = DEFAULT_MIN_SYSTEM_VOLT;
+
+	if (of_property_read_u32(np, "maxim,thermal-regulation-celsius",
+			&chg->thermal_regulation_temp))
+		chg->thermal_regulation_temp = DEFAULT_THERMAL_REGULATION_TEMP;
+
+	if (of_property_read_u32(np, "maxim,battery-overcurrent-microamp",
+			&chg->batttery_overcurrent))
+		chg->batttery_overcurrent = DEFAULT_BATTERY_OVERCURRENT;
+
+	if (of_property_read_u32(np, "maxim,charge-input-threshold-microvolt",
+			&chg->charge_input_threshold_volt))
+		chg->charge_input_threshold_volt =
+			DEFAULT_CHARGER_INPUT_THRESHOLD_VOLT;
+
+	return 0;
+}
+#else /* CONFIG_OF */
+static int max77693_dt_init(struct device *dev, struct max77693_charger *chg)
+{
+	return 0;
+}
+#endif /* CONFIG_OF */
+
+static int max77693_charger_probe(struct platform_device *pdev)
+{
+	struct max77693_charger *chg;
+	struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent);
+	int ret;
+
+	chg = devm_kzalloc(&pdev->dev, sizeof(*chg), GFP_KERNEL);
+	if (!chg)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, chg);
+	chg->dev = &pdev->dev;
+	chg->max77693 = max77693;
+
+	ret = max77693_dt_init(&pdev->dev, chg);
+	if (ret)
+		return ret;
+
+	ret = max77693_reg_init(chg);
+	if (ret)
+		return ret;
+
+	chg->charger.name = max77693_charger_name;
+	chg->charger.type = POWER_SUPPLY_TYPE_BATTERY;
+	chg->charger.properties = max77693_charger_props;
+	chg->charger.num_properties = ARRAY_SIZE(max77693_charger_props);
+	chg->charger.get_property = max77693_charger_get_property;
+
+	ret = device_create_file(&pdev->dev, &dev_attr_fast_charge_timer);
+	if (ret) {
+		dev_err(&pdev->dev, "failed: create fast charge timer sysfs entry\n");
+		goto err;
+	}
+
+	ret = device_create_file(&pdev->dev,
+			&dev_attr_top_off_threshold_current);
+	if (ret) {
+		dev_err(&pdev->dev, "failed: create top off current sysfs entry\n");
+		goto err;
+	}
+
+	ret = device_create_file(&pdev->dev, &dev_attr_top_off_timer);
+	if (ret) {
+		dev_err(&pdev->dev, "failed: create top off timer sysfs entry\n");
+		goto err;
+	}
+
+	ret = power_supply_register(&pdev->dev, &chg->charger);
+	if (ret) {
+		dev_err(&pdev->dev, "failed: power supply register\n");
+		goto err;
+	}
+
+	return 0;
+
+err:
+	device_remove_file(&pdev->dev, &dev_attr_top_off_timer);
+	device_remove_file(&pdev->dev, &dev_attr_top_off_threshold_current);
+	device_remove_file(&pdev->dev, &dev_attr_fast_charge_timer);
+
+	return ret;
+}
+
+static int max77693_charger_remove(struct platform_device *pdev)
+{
+	struct max77693_charger *chg = platform_get_drvdata(pdev);
+
+	device_remove_file(&pdev->dev, &dev_attr_top_off_timer);
+	device_remove_file(&pdev->dev, &dev_attr_top_off_threshold_current);
+	device_remove_file(&pdev->dev, &dev_attr_fast_charge_timer);
+
+	power_supply_unregister(&chg->charger);
+
+	return 0;
+}
+
+static const struct platform_device_id max77693_charger_id[] = {
+	{ "max77693-charger", 0, },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, max77693_charger_id);
+
+static struct platform_driver max77693_charger_driver = {
+	.driver = {
+		.name	= "max77693-charger",
+	},
+	.probe		= max77693_charger_probe,
+	.remove		= max77693_charger_remove,
+	.id_table	= max77693_charger_id,
+};
+module_platform_driver(max77693_charger_driver);
+
+MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski@samsung.com>");
+MODULE_DESCRIPTION("Maxim 77693 charger driver");
+MODULE_LICENSE("GPL");

drivers/power/reset/Kconfig

@@ -39,14 +39,13 @@ config POWER_RESET_AXXIA
 	  Say Y if you have an Axxia family SoC.
 
 config POWER_RESET_BRCMSTB
-	bool "Broadcom STB reset driver" if COMPILE_TEST
-	depends on ARM
+	bool "Broadcom STB reset driver"
+	depends on ARM || MIPS || COMPILE_TEST
 	default ARCH_BRCMSTB
 	help
-	  This driver provides restart support for ARM-based Broadcom STB
-	  boards.
+	  This driver provides restart support for Broadcom STB boards.
 
-	  Say Y here if you have an ARM-based Broadcom STB board and you wish
+	  Say Y here if you have a Broadcom STB board and you wish
 	  to have restart support.
 
 config POWER_RESET_GPIO
@@ -104,23 +103,16 @@ config POWER_RESET_QNAP
 
 config POWER_RESET_RESTART
 	bool "Restart power-off driver"
-	depends on ARM
 	help
 	  Some boards don't actually have the ability to power off.
 	  Instead they restart, and u-boot holds the SoC until the
 	  user presses a key. u-boot then boots into Linux.
 
-config POWER_RESET_SUN6I
-	bool "Allwinner A31 SoC reset driver"
-	depends on ARCH_SUNXI
-	help
-	  Reboot support for the Allwinner A31 SoCs.
-
 config POWER_RESET_ST
-	bool "ST restart power-off driver"
+	bool "ST restart driver"
 	depends on ARCH_STI
 	help
-	  Power off and reset support for STMicroelectronics boards.
+	  Reset support for STMicroelectronics boards.
 
 config POWER_RESET_VERSATILE
 	bool "ARM Versatile family reboot driver"
@@ -159,5 +151,11 @@ config POWER_RESET_SYSCON
 	help
 	  Reboot support for generic SYSCON mapped register reset.
 
+config POWER_RESET_RMOBILE
+	tristate "Renesas R-Mobile reset driver"
+	depends on ARCH_RMOBILE || COMPILE_TEST
+	help
+	  Reboot support for Renesas R-Mobile and SH-Mobile SoCs.
+
 endif
 

drivers/power/reset/Makefile

@@ -11,10 +11,10 @@ obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
 obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
 obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
 obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
-obj-$(CONFIG_POWER_RESET_SUN6I) += sun6i-reboot.o
 obj-$(CONFIG_POWER_RESET_ST) += st-poweroff.o
 obj-$(CONFIG_POWER_RESET_VERSATILE) += arm-versatile-reboot.o
 obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o
 obj-$(CONFIG_POWER_RESET_XGENE) += xgene-reboot.o
 obj-$(CONFIG_POWER_RESET_KEYSTONE) += keystone-reset.o
 obj-$(CONFIG_POWER_RESET_SYSCON) += syscon-reboot.o
+obj-$(CONFIG_POWER_RESET_RMOBILE) += rmobile-reset.o

drivers/power/reset/arm-versatile-reboot.c

@@ -13,16 +13,22 @@
 #include <linux/reboot.h>
 #include <linux/regmap.h>
 #include <linux/of.h>
-#include <asm/system_misc.h>
+
+#define INTEGRATOR_HDR_CTRL_OFFSET	0x0C
+#define INTEGRATOR_HDR_LOCK_OFFSET	0x14
+#define INTEGRATOR_CM_CTRL_RESET	(1 << 3)
 
 #define REALVIEW_SYS_LOCK_OFFSET	0x20
-#define REALVIEW_SYS_LOCK_VAL		0xA05F
 #define REALVIEW_SYS_RESETCTL_OFFSET	0x40
 
+/* Magic unlocking token used on all Versatile boards */
+#define VERSATILE_LOCK_VAL		0xA05F
+
 /*
  * We detect the different syscon types from the compatible strings.
  */
 enum versatile_reboot {
+	INTEGRATOR_REBOOT_CM,
 	REALVIEW_REBOOT_EB,
 	REALVIEW_REBOOT_PB1176,
 	REALVIEW_REBOOT_PB11MP,
@@ -35,6 +41,10 @@ static struct regmap *syscon_regmap;
 static enum versatile_reboot versatile_reboot_type;
 
 static const struct of_device_id versatile_reboot_of_match[] = {
+	{
+		.compatible = "arm,core-module-integrator",
+		.data = (void *)INTEGRATOR_REBOOT_CM
+	},
 	{
 		.compatible = "arm,realview-eb-syscon",
 		.data = (void *)REALVIEW_REBOOT_EB,
@@ -55,31 +65,47 @@ static const struct of_device_id versatile_reboot_of_match[] = {
 		.compatible = "arm,realview-pbx-syscon",
 		.data = (void *)REALVIEW_REBOOT_PBX,
 	},
+	{},
 };
 
-static void versatile_reboot(enum reboot_mode mode, const char *cmd)
+static int versatile_reboot(struct notifier_block *this, unsigned long mode,
+			    void *cmd)
 {
 	/* Unlock the reset register */
-	regmap_write(syscon_regmap, REALVIEW_SYS_LOCK_OFFSET,
-		     REALVIEW_SYS_LOCK_VAL);
 	/* Then hit reset on the different machines */
 	switch (versatile_reboot_type) {
+	case INTEGRATOR_REBOOT_CM:
+		regmap_write(syscon_regmap, INTEGRATOR_HDR_LOCK_OFFSET,
+			     VERSATILE_LOCK_VAL);
+		regmap_update_bits(syscon_regmap,
+				   INTEGRATOR_HDR_CTRL_OFFSET,
+				   INTEGRATOR_CM_CTRL_RESET,
+				   INTEGRATOR_CM_CTRL_RESET);
+		break;
 	case REALVIEW_REBOOT_EB:
+		regmap_write(syscon_regmap, REALVIEW_SYS_LOCK_OFFSET,
+			     VERSATILE_LOCK_VAL);
 		regmap_write(syscon_regmap,
 			     REALVIEW_SYS_RESETCTL_OFFSET, 0x0008);
 		break;
 	case REALVIEW_REBOOT_PB1176:
+		regmap_write(syscon_regmap, REALVIEW_SYS_LOCK_OFFSET,
+			     VERSATILE_LOCK_VAL);
 		regmap_write(syscon_regmap,
 			     REALVIEW_SYS_RESETCTL_OFFSET, 0x0100);
 		break;
 	case REALVIEW_REBOOT_PB11MP:
 	case REALVIEW_REBOOT_PBA8:
+		regmap_write(syscon_regmap, REALVIEW_SYS_LOCK_OFFSET,
+			     VERSATILE_LOCK_VAL);
 		regmap_write(syscon_regmap, REALVIEW_SYS_RESETCTL_OFFSET,
 			     0x0000);
 		regmap_write(syscon_regmap, REALVIEW_SYS_RESETCTL_OFFSET,
 			     0x0004);
 		break;
 	case REALVIEW_REBOOT_PBX:
+		regmap_write(syscon_regmap, REALVIEW_SYS_LOCK_OFFSET,
+			     VERSATILE_LOCK_VAL);
 		regmap_write(syscon_regmap, REALVIEW_SYS_RESETCTL_OFFSET,
 			     0x00f0);
 		regmap_write(syscon_regmap, REALVIEW_SYS_RESETCTL_OFFSET,
@@ -87,12 +113,20 @@ static void versatile_reboot(enum reboot_mode mode, const char *cmd)
 		break;
 	}
 	dsb();
+
+	return NOTIFY_DONE;
 }
 
+static struct notifier_block versatile_reboot_nb = {
+	.notifier_call = versatile_reboot,
+	.priority = 192,
+};
+
 static int __init versatile_reboot_probe(void)
 {
 	const struct of_device_id *reboot_id;
 	struct device_node *np;
+	int err;
 
 	np = of_find_matching_node_and_match(NULL, versatile_reboot_of_match,
 						 &reboot_id);
@@ -104,7 +138,10 @@ static int __init versatile_reboot_probe(void)
 	if (IS_ERR(syscon_regmap))
 		return PTR_ERR(syscon_regmap);
 
-	arm_pm_restart = versatile_reboot;
+	err = register_restart_handler(&versatile_reboot_nb);
+	if (err)
+		return err;
+
 	pr_info("versatile reboot driver registered\n");
 	return 0;
 }

drivers/power/reset/at91-poweroff.c

@@ -71,10 +71,11 @@ static void at91_poweroff(void)
 	writel(AT91_SHDW_KEY | AT91_SHDW_SHDW, at91_shdwc_base + AT91_SHDW_CR);
 }
 
-const enum wakeup_type at91_poweroff_get_wakeup_mode(struct device_node *np)
+static int at91_poweroff_get_wakeup_mode(struct device_node *np)
 {
 	const char *pm;
-	int err, i;
+	unsigned int i;
+	int err;
 
 	err = of_property_read_string(np, "atmel,wakeup-mode", &pm);
 	if (err < 0)
@@ -90,7 +91,7 @@ const enum wakeup_type at91_poweroff_get_wakeup_mode(struct device_node *np)
 static void at91_poweroff_dt_set_wakeup_mode(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
-	enum wakeup_type wakeup_mode;
+	int wakeup_mode;
 	u32 mode = 0, tmp;
 
 	wakeup_mode = at91_poweroff_get_wakeup_mode(np);

drivers/power/reset/at91-reset.c

@@ -17,8 +17,6 @@
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
 
-#include <asm/system_misc.h>
-
 #include <soc/at91/at91sam9_ddrsdr.h>
 #include <soc/at91/at91sam9_sdramc.h>
 
@@ -54,7 +52,8 @@ static void __iomem *at91_ramc_base[2], *at91_rstc_base;
 * reset register it can be left driving the data bus and
 * killing the chance of a subsequent boot from NAND
 */
-static void at91sam9260_restart(enum reboot_mode mode, const char *cmd)
+static int at91sam9260_restart(struct notifier_block *this, unsigned long mode,
+			       void *cmd)
 {
 	asm volatile(
 		/* Align to cache lines */
@@ -76,9 +75,12 @@ static void at91sam9260_restart(enum reboot_mode mode, const char *cmd)
 		  "r" (1),
 		  "r" (AT91_SDRAMC_LPCB_POWER_DOWN),
 		  "r" (AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST));
+
+	return NOTIFY_DONE;
 }
 
-static void at91sam9g45_restart(enum reboot_mode mode, const char *cmd)
+static int at91sam9g45_restart(struct notifier_block *this, unsigned long mode,
+			       void *cmd)
 {
 	asm volatile(
 		/*
@@ -117,6 +119,8 @@ static void at91sam9g45_restart(enum reboot_mode mode, const char *cmd)
 		  "r" (AT91_DDRSDRC_LPCB_POWER_DOWN),
 		  "r" (AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST)
 		: "r0");
+
+	return NOTIFY_DONE;
 }
 
 static void __init at91_reset_status(struct platform_device *pdev)
@@ -161,6 +165,10 @@ static struct of_device_id at91_reset_of_match[] = {
 	{ /* sentinel */ }
 };
 
+static struct notifier_block at91_restart_nb = {
+	.priority = 192,
+};
+
 static int at91_reset_of_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *match;
@@ -183,9 +191,8 @@ static int at91_reset_of_probe(struct platform_device *pdev)
 	}
 
 	match = of_match_node(at91_reset_of_match, pdev->dev.of_node);
-	arm_pm_restart = match->data;
-
-	return 0;
+	at91_restart_nb.notifier_call = match->data;
+	return register_restart_handler(&at91_restart_nb);
 }
 
 static int at91_reset_platform_probe(struct platform_device *pdev)
@@ -212,10 +219,11 @@ static int at91_reset_platform_probe(struct platform_device *pdev)
 	}
 
 	match = platform_get_device_id(pdev);
-	arm_pm_restart = (void (*)(enum reboot_mode, const char*))
-		match->driver_data;
+	at91_restart_nb.notifier_call =
+		(int (*)(struct notifier_block *,
+			 unsigned long, void *)) match->driver_data;
 
-	return 0;
+	return register_restart_handler(&at91_restart_nb);
 }
 
 static int at91_reset_probe(struct platform_device *pdev)

drivers/power/reset/brcmstb-reboot.c

@@ -11,6 +11,7 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/init.h>
@@ -34,13 +35,20 @@ static struct regmap *regmap;
 static u32 rst_src_en;
 static u32 sw_mstr_rst;
 
+struct reset_reg_mask {
+	u32 rst_src_en_mask;
+	u32 sw_mstr_rst_mask;
+};
+
+static const struct reset_reg_mask *reset_masks;
+
 static int brcmstb_restart_handler(struct notifier_block *this,
 				   unsigned long mode, void *cmd)
 {
 	int rc;
 	u32 tmp;
 
-	rc = regmap_write(regmap, rst_src_en, 1);
+	rc = regmap_write(regmap, rst_src_en, reset_masks->rst_src_en_mask);
 	if (rc) {
 		pr_err("failed to write rst_src_en (%d)\n", rc);
 		return NOTIFY_DONE;
@@ -52,7 +60,7 @@ static int brcmstb_restart_handler(struct notifier_block *this,
 		return NOTIFY_DONE;
 	}
 
-	rc = regmap_write(regmap, sw_mstr_rst, 1);
+	rc = regmap_write(regmap, sw_mstr_rst, reset_masks->sw_mstr_rst_mask);
 	if (rc) {
 		pr_err("failed to write sw_mstr_rst (%d)\n", rc);
 		return NOTIFY_DONE;
@@ -75,10 +83,34 @@ static struct notifier_block brcmstb_restart_nb = {
 	.priority = 128,
 };
 
+static const struct reset_reg_mask reset_bits_40nm = {
+	.rst_src_en_mask = BIT(0),
+	.sw_mstr_rst_mask = BIT(0),
+};
+
+static const struct reset_reg_mask reset_bits_65nm = {
+	.rst_src_en_mask = BIT(3),
+	.sw_mstr_rst_mask = BIT(31),
+};
+
+static const struct of_device_id of_match[] = {
+	{ .compatible = "brcm,brcmstb-reboot", .data = &reset_bits_40nm },
+	{ .compatible = "brcm,bcm7038-reboot", .data = &reset_bits_65nm },
+	{},
+};
+
 static int brcmstb_reboot_probe(struct platform_device *pdev)
 {
 	int rc;
 	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *of_id;
+
+	of_id = of_match_node(of_match, np);
+	if (!of_id) {
+		pr_err("failed to look up compatible string\n");
+		return -EINVAL;
+	}
+	reset_masks = of_id->data;
 
 	regmap = syscon_regmap_lookup_by_phandle(np, "syscon");
 	if (IS_ERR(regmap)) {
@@ -108,11 +140,6 @@ static int brcmstb_reboot_probe(struct platform_device *pdev)
 	return rc;
 }
 
-static const struct of_device_id of_match[] = {
-	{ .compatible = "brcm,brcmstb-reboot", },
-	{},
-};
-
 static struct platform_driver brcmstb_reboot_driver = {
 	.probe = brcmstb_reboot_probe,
 	.driver = {

drivers/power/reset/ltc2952-poweroff.c

@@ -32,7 +32,9 @@
  * - trigger (input)
  *     A level change indicates the shut-down trigger. If it's state reverts
  *     within the time-out defined by trigger_delay, the shut down is not
- *     executed.
+ *     executed. If no pin is assigned to this input, the driver will start the
+ *     watchdog toggle immediately. The chip will only power off the system if
+ *     it is requested to do so through the kill line.
  *
  * - watchdog (output)
  *     Once a shut down is triggered, the driver will toggle this signal,
@@ -63,7 +65,7 @@
 #include <linux/gpio/consumer.h>
 #include <linux/reboot.h>
 
-struct ltc2952_poweroff_data {
+struct ltc2952_poweroff {
 	struct hrtimer timer_trigger;
 	struct hrtimer timer_wde;
 
@@ -72,22 +74,21 @@ struct ltc2952_poweroff_data {
 
 	struct device *dev;
 
-	unsigned int virq;
+	struct gpio_desc *gpio_trigger;
+	struct gpio_desc *gpio_watchdog;
+	struct gpio_desc *gpio_kill;
 
-	/**
-	 * 0: trigger
-	 * 1: watchdog
-	 * 2: kill
-	 */
-	struct gpio_desc *gpio[3];
+	bool kernel_panic;
+	struct notifier_block panic_notifier;
 };
 
-static int ltc2952_poweroff_panic;
-static struct ltc2952_poweroff_data *ltc2952_data;
+#define to_ltc2952(p, m) container_of(p, struct ltc2952_poweroff, m)
 
-#define POWERPATH_IO_TRIGGER	0
-#define POWERPATH_IO_WATCHDOG	1
-#define POWERPATH_IO_KILL	2
+/*
+ * This global variable is only needed for pm_power_off. We should
+ * remove it entirely once we don't need the global state anymore.
+ */
+static struct ltc2952_poweroff *ltc2952_data;
 
 /**
  * ltc2952_poweroff_timer_wde - Timer callback
@@ -103,29 +104,24 @@ static enum hrtimer_restart ltc2952_poweroff_timer_wde(struct hrtimer *timer)
 	ktime_t now;
 	int state;
 	unsigned long overruns;
+	struct ltc2952_poweroff *data = to_ltc2952(timer, timer_wde);
 
-	if (ltc2952_poweroff_panic)
+	if (data->kernel_panic)
 		return HRTIMER_NORESTART;
 
-	state = gpiod_get_value(ltc2952_data->gpio[POWERPATH_IO_WATCHDOG]);
-	gpiod_set_value(ltc2952_data->gpio[POWERPATH_IO_WATCHDOG], !state);
+	state = gpiod_get_value(data->gpio_watchdog);
+	gpiod_set_value(data->gpio_watchdog, !state);
 
 	now = hrtimer_cb_get_time(timer);
-	overruns = hrtimer_forward(timer, now, ltc2952_data->wde_interval);
+	overruns = hrtimer_forward(timer, now, data->wde_interval);
 
 	return HRTIMER_RESTART;
 }
 
-static enum hrtimer_restart ltc2952_poweroff_timer_trigger(
-	struct hrtimer *timer)
+static void ltc2952_poweroff_start_wde(struct ltc2952_poweroff *data)
 {
-	int ret;
-
-	ret = hrtimer_start(&ltc2952_data->timer_wde,
-		ltc2952_data->wde_interval, HRTIMER_MODE_REL);
-
-	if (ret) {
-		dev_err(ltc2952_data->dev, "unable to start the timer\n");
+	if (hrtimer_start(&data->timer_wde, data->wde_interval,
+			  HRTIMER_MODE_REL)) {
 		/*
 		 * The device will not toggle the watchdog reset,
 		 * thus shut down is only safe if the PowerPath controller
@@ -134,10 +130,17 @@ static enum hrtimer_restart ltc2952_poweroff_timer_trigger(
 		 *
 		 * Only sending a warning as the system will power-off anyway
 		 */
+		dev_err(data->dev, "unable to start the timer\n");
 	}
+}
 
-	dev_info(ltc2952_data->dev, "executing shutdown\n");
+static enum hrtimer_restart
+ltc2952_poweroff_timer_trigger(struct hrtimer *timer)
+{
+	struct ltc2952_poweroff *data = to_ltc2952(timer, timer_trigger);
 
+	ltc2952_poweroff_start_wde(data);
+	dev_info(data->dev, "executing shutdown\n");
 	orderly_poweroff(true);
 
 	return HRTIMER_NORESTART;
@@ -154,180 +157,161 @@ static enum hrtimer_restart ltc2952_poweroff_timer_trigger(
  */
 static irqreturn_t ltc2952_poweroff_handler(int irq, void *dev_id)
 {
-	int ret;
-	struct ltc2952_poweroff_data *data = dev_id;
+	struct ltc2952_poweroff *data = dev_id;
 
-	if (ltc2952_poweroff_panic)
-		goto irq_ok;
-
-	if (hrtimer_active(&data->timer_wde)) {
+	if (data->kernel_panic || hrtimer_active(&data->timer_wde)) {
 		/* shutdown is already triggered, nothing to do any more */
-		goto irq_ok;
+		return IRQ_HANDLED;
 	}
 
-	if (!hrtimer_active(&data->timer_trigger)) {
-		ret = hrtimer_start(&data->timer_trigger, data->trigger_delay,
-			HRTIMER_MODE_REL);
-
-		if (ret)
+	if (gpiod_get_value(data->gpio_trigger)) {
+		if (hrtimer_start(&data->timer_trigger, data->trigger_delay,
+				  HRTIMER_MODE_REL))
 			dev_err(data->dev, "unable to start the wait timer\n");
 	} else {
-		ret = hrtimer_cancel(&data->timer_trigger);
+		hrtimer_cancel(&data->timer_trigger);
 		/* omitting return value check, timer should have been valid */
 	}
-
-irq_ok:
 	return IRQ_HANDLED;
 }
 
 static void ltc2952_poweroff_kill(void)
 {
-	gpiod_set_value(ltc2952_data->gpio[POWERPATH_IO_KILL], 1);
-}
-
-static int ltc2952_poweroff_suspend(struct platform_device *pdev,
-	pm_message_t state)
-{
-	return -ENOSYS;
-}
-
-static int ltc2952_poweroff_resume(struct platform_device *pdev)
-{
-	return -ENOSYS;
+	gpiod_set_value(ltc2952_data->gpio_kill, 1);
 }
 
-static void ltc2952_poweroff_default(struct ltc2952_poweroff_data *data)
+static void ltc2952_poweroff_default(struct ltc2952_poweroff *data)
 {
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(data->gpio); i++)
-		data->gpio[i] = NULL;
-
 	data->wde_interval = ktime_set(0, 300L*1E6L);
 	data->trigger_delay = ktime_set(2, 500L*1E6L);
 
 	hrtimer_init(&data->timer_trigger, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	data->timer_trigger.function = &ltc2952_poweroff_timer_trigger;
+	data->timer_trigger.function = ltc2952_poweroff_timer_trigger;
 
 	hrtimer_init(&data->timer_wde, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	data->timer_wde.function = &ltc2952_poweroff_timer_wde;
+	data->timer_wde.function = ltc2952_poweroff_timer_wde;
 }
 
 static int ltc2952_poweroff_init(struct platform_device *pdev)
 {
-	int ret, virq;
-	unsigned int i;
-	struct ltc2952_poweroff_data *data;
-
-	static char *name[] = {
-		"trigger",
-		"watchdog",
-		"kill",
-		NULL
-	};
-
-	data = ltc2952_data;
-	ltc2952_poweroff_default(ltc2952_data);
-
-	for (i = 0; i < ARRAY_SIZE(ltc2952_data->gpio); i++) {
-		ltc2952_data->gpio[i] = gpiod_get(&pdev->dev, name[i]);
+	int ret;
+	struct ltc2952_poweroff *data = platform_get_drvdata(pdev);
 
-		if (IS_ERR(ltc2952_data->gpio[i])) {
-			ret = PTR_ERR(ltc2952_data->gpio[i]);
-			dev_err(&pdev->dev,
-				"unable to claim the following gpio: %s\n",
-				name[i]);
-			goto err_io;
-		}
-	}
+	ltc2952_poweroff_default(data);
 
-	ret = gpiod_direction_output(
-		ltc2952_data->gpio[POWERPATH_IO_WATCHDOG], 0);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to use watchdog-gpio as output\n");
-		goto err_io;
+	data->gpio_watchdog = devm_gpiod_get(&pdev->dev, "watchdog",
+					     GPIOD_OUT_LOW);
+	if (IS_ERR(data->gpio_watchdog)) {
+		ret = PTR_ERR(data->gpio_watchdog);
+		dev_err(&pdev->dev, "unable to claim gpio \"watchdog\"\n");
+		return ret;
 	}
 
-	ret = gpiod_direction_output(ltc2952_data->gpio[POWERPATH_IO_KILL], 0);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to use kill-gpio as output\n");
-		goto err_io;
+	data->gpio_kill = devm_gpiod_get(&pdev->dev, "kill", GPIOD_OUT_LOW);
+	if (IS_ERR(data->gpio_kill)) {
+		ret = PTR_ERR(data->gpio_kill);
+		dev_err(&pdev->dev, "unable to claim gpio \"kill\"\n");
+		return ret;
 	}
 
-	virq = gpiod_to_irq(ltc2952_data->gpio[POWERPATH_IO_TRIGGER]);
-	if (virq < 0) {
-		dev_err(&pdev->dev, "cannot map GPIO as interrupt");
-		goto err_io;
+	data->gpio_trigger = devm_gpiod_get(&pdev->dev, "trigger", GPIOD_IN);
+	if (IS_ERR(data->gpio_trigger)) {
+		/*
+		 * It's not a problem if the trigger gpio isn't available, but
+		 * it is worth a warning if its use was defined in the device
+		 * tree.
+		 */
+		if (PTR_ERR(data->gpio_trigger) != -ENOENT)
+			dev_err(&pdev->dev,
+				"unable to claim gpio \"trigger\"\n");
+		data->gpio_trigger = NULL;
 	}
 
-	ltc2952_data->virq = virq;
-	ret = request_irq(virq,
-		ltc2952_poweroff_handler,
-		(IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING),
-		"ltc2952-poweroff",
-		ltc2952_data
-	);
-
-	if (ret) {
-		dev_err(&pdev->dev, "cannot configure an interrupt handler\n");
-		goto err_io;
+	if (devm_request_irq(&pdev->dev, gpiod_to_irq(data->gpio_trigger),
+			     ltc2952_poweroff_handler,
+			     (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING),
+			     "ltc2952-poweroff",
+			     data)) {
+		/*
+		 * Some things may have happened:
+		 * - No trigger input was defined
+		 * - Claiming the GPIO failed
+		 * - We could not map to an IRQ
+		 * - We couldn't register an interrupt handler
+		 *
+		 * None of these really are problems, but all of them
+		 * disqualify the push button from controlling the power.
+		 *
+		 * It is therefore important to note that if the ltc2952
+		 * detects a button press for long enough, it will still start
+		 * its own powerdown window and cut the power on us if we don't
+		 * start the watchdog trigger.
+		 */
+		if (data->gpio_trigger) {
+			dev_warn(&pdev->dev,
+				 "unable to configure the trigger interrupt\n");
+			devm_gpiod_put(&pdev->dev, data->gpio_trigger);
+			data->gpio_trigger = NULL;
+		}
+		dev_info(&pdev->dev,
+			 "power down trigger input will not be used\n");
+		ltc2952_poweroff_start_wde(data);
 	}
 
 	return 0;
+}
 
-err_io:
-	for (i = 0; i < ARRAY_SIZE(ltc2952_data->gpio); i++)
-		if (ltc2952_data->gpio[i])
-			gpiod_put(ltc2952_data->gpio[i]);
+static int ltc2952_poweroff_notify_panic(struct notifier_block *nb,
+					 unsigned long code, void *unused)
+{
+	struct ltc2952_poweroff *data = to_ltc2952(nb, panic_notifier);
 
-	return ret;
+	data->kernel_panic = true;
+	return NOTIFY_DONE;
 }
 
 static int ltc2952_poweroff_probe(struct platform_device *pdev)
 {
 	int ret;
+	struct ltc2952_poweroff *data;
 
 	if (pm_power_off) {
 		dev_err(&pdev->dev, "pm_power_off already registered");
 		return -EBUSY;
 	}
 
-	ltc2952_data = kzalloc(sizeof(*ltc2952_data), GFP_KERNEL);
-	if (!ltc2952_data)
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
 		return -ENOMEM;
 
-	ltc2952_data->dev = &pdev->dev;
+	data->dev = &pdev->dev;
+	platform_set_drvdata(pdev, data);
 
 	ret = ltc2952_poweroff_init(pdev);
 	if (ret)
-		goto err;
+		return ret;
 
-	pm_power_off = &ltc2952_poweroff_kill;
+	/* TODO: remove ltc2952_data */
+	ltc2952_data = data;
+	pm_power_off = ltc2952_poweroff_kill;
 
+	data->panic_notifier.notifier_call = ltc2952_poweroff_notify_panic;
+	atomic_notifier_chain_register(&panic_notifier_list,
+				       &data->panic_notifier);
 	dev_info(&pdev->dev, "probe successful\n");
 
 	return 0;
-
-err:
-	kfree(ltc2952_data);
-	return ret;
 }
 
 static int ltc2952_poweroff_remove(struct platform_device *pdev)
 {
-	unsigned int i;
+	struct ltc2952_poweroff *data = platform_get_drvdata(pdev);
 
 	pm_power_off = NULL;
-
-	if (ltc2952_data) {
-		free_irq(ltc2952_data->virq, ltc2952_data);
-
-		for (i = 0; i < ARRAY_SIZE(ltc2952_data->gpio); i++)
-			gpiod_put(ltc2952_data->gpio[i]);
-
-		kfree(ltc2952_data);
-	}
-
+	hrtimer_cancel(&data->timer_trigger);
+	hrtimer_cancel(&data->timer_wde);
+	atomic_notifier_chain_unregister(&panic_notifier_list,
+					 &data->panic_notifier);
 	return 0;
 }
 
@@ -344,41 +328,9 @@ static struct platform_driver ltc2952_poweroff_driver = {
 		.name = "ltc2952-poweroff",
 		.of_match_table = of_ltc2952_poweroff_match,
 	},
-	.suspend = ltc2952_poweroff_suspend,
-	.resume = ltc2952_poweroff_resume,
-};
-
-static int ltc2952_poweroff_notify_panic(struct notifier_block *nb,
-	unsigned long code, void *unused)
-{
-	ltc2952_poweroff_panic = 1;
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block ltc2952_poweroff_panic_nb = {
-	.notifier_call = ltc2952_poweroff_notify_panic,
 };
 
-static int __init ltc2952_poweroff_platform_init(void)
-{
-	ltc2952_poweroff_panic = 0;
-
-	atomic_notifier_chain_register(&panic_notifier_list,
-		&ltc2952_poweroff_panic_nb);
-
-	return platform_driver_register(&ltc2952_poweroff_driver);
-}
-
-static void __exit ltc2952_poweroff_platform_exit(void)
-{
-	atomic_notifier_chain_unregister(&panic_notifier_list,
-		&ltc2952_poweroff_panic_nb);
-
-	platform_driver_unregister(&ltc2952_poweroff_driver);
-}
-
-module_init(ltc2952_poweroff_platform_init);
-module_exit(ltc2952_poweroff_platform_exit);
+module_platform_driver(ltc2952_poweroff_driver);
 
 MODULE_AUTHOR("Ren Moll <rene.moll@xsens.com>");
 MODULE_DESCRIPTION("LTC PowerPath power-off driver");

drivers/power/reset/restart-poweroff.c

@@ -16,7 +16,6 @@
 #include <linux/of_platform.h>
 #include <linux/module.h>
 #include <linux/reboot.h>
-#include <asm/system_misc.h>
 
 static void restart_poweroff_do_poweroff(void)
 {

drivers/power/reset/rmobile-reset.c

+/*
+ * Renesas R-Mobile Reset Driver
+ *
+ * Copyright (C) 2014 Glider bvba
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+#include <linux/reboot.h>
+
+/* SYSC Register Bank 2 */
+#define RESCNT2		0x20		/* Reset Control Register 2 */
+
+/* Reset Control Register 2 */
+#define RESCNT2_PRES	0x80000000	/* Soft power-on reset */
+
+static void __iomem *sysc_base2;
+
+static int rmobile_reset_handler(struct notifier_block *this,
+				 unsigned long mode, void *cmd)
+{
+	pr_debug("%s %lu\n", __func__, mode);
+
+	/* Let's assume we have acquired the HPB semaphore */
+	writel(RESCNT2_PRES, sysc_base2 + RESCNT2);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block rmobile_reset_nb = {
+	.notifier_call = rmobile_reset_handler,
+	.priority = 192,
+};
+
+static int rmobile_reset_probe(struct platform_device *pdev)
+{
+	int error;
+
+	sysc_base2 = of_iomap(pdev->dev.of_node, 1);
+	if (!sysc_base2)
+		return -ENODEV;
+
+	error = register_restart_handler(&rmobile_reset_nb);
+	if (error) {
+		dev_err(&pdev->dev,
+			"cannot register restart handler (err=%d)\n", error);
+		goto fail_unmap;
+	}
+
+	return 0;
+
+fail_unmap:
+	iounmap(sysc_base2);
+	return error;
+}
+
+static int rmobile_reset_remove(struct platform_device *pdev)
+{
+	unregister_restart_handler(&rmobile_reset_nb);
+	iounmap(sysc_base2);
+	return 0;
+}
+
+static const struct of_device_id rmobile_reset_of_match[] = {
+	{ .compatible = "renesas,sysc-rmobile", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rmobile_reset_of_match);
+
+static struct platform_driver rmobile_reset_driver = {
+	.probe = rmobile_reset_probe,
+	.remove = rmobile_reset_remove,
+	.driver = {
+		.name = "rmobile_reset",
+		.of_match_table = rmobile_reset_of_match,
+	},
+};
+
+module_platform_driver(rmobile_reset_driver);
+
+MODULE_DESCRIPTION("Renesas R-Mobile Reset Driver");
+MODULE_AUTHOR("Geert Uytterhoeven <geert+renesas@glider.be>");
+MODULE_LICENSE("GPL v2");

drivers/power/reset/st-poweroff.c

@@ -15,10 +15,9 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/syscon.h>
+#include <linux/reboot.h>
 #include <linux/regmap.h>
 
-#include <asm/system_misc.h>
-
 struct reset_syscfg {
 	struct regmap *regmap;
 	/* syscfg used for reset */
@@ -75,7 +74,8 @@ static struct reset_syscfg stid127_reset = {
 
 static struct reset_syscfg *st_restart_syscfg;
 
-static void st_restart(enum reboot_mode reboot_mode, const char *cmd)
+static int st_restart(struct notifier_block *this, unsigned long mode,
+		      void *cmd)
 {
 	/* reset syscfg updated */
 	regmap_update_bits(st_restart_syscfg->regmap,
@@ -88,8 +88,15 @@ static void st_restart(enum reboot_mode reboot_mode, const char *cmd)
 			   st_restart_syscfg->offset_rst_msk,
 			   st_restart_syscfg->mask_rst_msk,
 			   0);
+
+	return NOTIFY_DONE;
 }
 
+static struct notifier_block st_restart_nb = {
+	.notifier_call = st_restart,
+	.priority = 192,
+};
+
 static struct of_device_id st_reset_of_match[] = {
 	{
 		.compatible = "st,stih415-restart",
@@ -126,9 +133,7 @@ static int st_reset_probe(struct platform_device *pdev)
 		return PTR_ERR(st_restart_syscfg->regmap);
 	}
 
-	arm_pm_restart = st_restart;
-
-	return 0;
+	return register_restart_handler(&st_restart_nb);
 }
 
 static struct platform_driver st_reset_driver = {

drivers/power/reset/sun6i-reboot.c

-/*
- * Allwinner A31 SoCs reset code
- *
- * Copyright (C) 2012-2014 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of_address.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-
-#include <asm/system_misc.h>
-
-#define SUN6I_WATCHDOG1_IRQ_REG		0x00
-#define SUN6I_WATCHDOG1_CTRL_REG	0x10
-#define SUN6I_WATCHDOG1_CTRL_RESTART		BIT(0)
-#define SUN6I_WATCHDOG1_CONFIG_REG	0x14
-#define SUN6I_WATCHDOG1_CONFIG_RESTART		BIT(0)
-#define SUN6I_WATCHDOG1_CONFIG_IRQ		BIT(1)
-#define SUN6I_WATCHDOG1_MODE_REG	0x18
-#define SUN6I_WATCHDOG1_MODE_ENABLE		BIT(0)
-
-static void __iomem *wdt_base;
-
-static void sun6i_wdt_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (!wdt_base)
-		return;
-
-	/* Disable interrupts */
-	writel(0, wdt_base + SUN6I_WATCHDOG1_IRQ_REG);
-
-	/* We want to disable the IRQ and just reset the whole system */
-	writel(SUN6I_WATCHDOG1_CONFIG_RESTART,
-		wdt_base + SUN6I_WATCHDOG1_CONFIG_REG);
-
-	/* Enable timer. The default and lowest interval value is 0.5s */
-	writel(SUN6I_WATCHDOG1_MODE_ENABLE,
-		wdt_base + SUN6I_WATCHDOG1_MODE_REG);
-
-	/* Restart the watchdog. */
-	writel(SUN6I_WATCHDOG1_CTRL_RESTART,
-		wdt_base + SUN6I_WATCHDOG1_CTRL_REG);
-
-	while (1) {
-		mdelay(5);
-		writel(SUN6I_WATCHDOG1_MODE_ENABLE,
-			wdt_base + SUN6I_WATCHDOG1_MODE_REG);
-	}
-}
-
-static int sun6i_reboot_probe(struct platform_device *pdev)
-{
-	wdt_base = of_iomap(pdev->dev.of_node, 0);
-	if (!wdt_base) {
-		WARN(1, "failed to map watchdog base address");
-		return -ENODEV;
-	}
-
-	arm_pm_restart = sun6i_wdt_restart;
-
-	return 0;
-}
-
-static struct of_device_id sun6i_reboot_of_match[] = {
-	{ .compatible = "allwinner,sun6i-a31-wdt" },
-	{}
-};
-
-static struct platform_driver sun6i_reboot_driver = {
-	.probe = sun6i_reboot_probe,
-	.driver = {
-		.name = "sun6i-reboot",
-		.of_match_table = sun6i_reboot_of_match,
-	},
-};
-module_platform_driver(sun6i_reboot_driver);

drivers/power/reset/vexpress-poweroff.c

@@ -111,23 +111,20 @@ static int _vexpress_register_restart_handler(struct device *dev)
 
 static int vexpress_reset_probe(struct platform_device *pdev)
 {
-	enum vexpress_reset_func func;
 	const struct of_device_id *match =
 			of_match_device(vexpress_reset_of_match, &pdev->dev);
 	struct regmap *regmap;
 	int ret = 0;
 
-	if (match)
-		func = (enum vexpress_reset_func)match->data;
-	else
-		func = pdev->id_entry->driver_data;
+	if (!match)
+		return -EINVAL;
 
 	regmap = devm_regmap_init_vexpress_config(&pdev->dev);
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 	dev_set_drvdata(&pdev->dev, regmap);
 
-	switch (func) {
+	switch ((enum vexpress_reset_func)match->data) {
 	case FUNC_SHUTDOWN:
 		vexpress_power_off_device = &pdev->dev;
 		pm_power_off = vexpress_power_off;
@@ -144,20 +141,12 @@ static int vexpress_reset_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static const struct platform_device_id vexpress_reset_id_table[] = {
-	{ .name = "vexpress-reset", .driver_data = FUNC_RESET, },
-	{ .name = "vexpress-shutdown", .driver_data = FUNC_SHUTDOWN, },
-	{ .name = "vexpress-reboot", .driver_data = FUNC_REBOOT, },
-	{}
-};
-
 static struct platform_driver vexpress_reset_driver = {
 	.probe = vexpress_reset_probe,
 	.driver = {
 		.name = "vexpress-reset",
 		.of_match_table = vexpress_reset_of_match,
 	},
-	.id_table = vexpress_reset_id_table,
 };
 
 static int __init vexpress_reset_init(void)

drivers/power/rt5033_battery.c

+/*
+ * Fuel gauge driver for Richtek RT5033
+ *
+ * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published bythe Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/rt5033-private.h>
+#include <linux/mfd/rt5033.h>
+
+static int rt5033_battery_get_capacity(struct i2c_client *client)
+{
+	struct rt5033_battery *battery = i2c_get_clientdata(client);
+	u32 msb;
+
+	regmap_read(battery->regmap, RT5033_FUEL_REG_SOC_H, &msb);
+
+	return msb;
+}
+
+static int rt5033_battery_get_present(struct i2c_client *client)
+{
+	struct rt5033_battery *battery = i2c_get_clientdata(client);
+	u32 val;
+
+	regmap_read(battery->regmap, RT5033_FUEL_REG_CONFIG_L, &val);
+
+	return (val & RT5033_FUEL_BAT_PRESENT) ? true : false;
+}
+
+static int rt5033_battery_get_watt_prop(struct i2c_client *client,
+		enum power_supply_property psp)
+{
+	struct rt5033_battery *battery = i2c_get_clientdata(client);
+	unsigned int regh, regl;
+	int ret;
+	u32 msb, lsb;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		regh = RT5033_FUEL_REG_VBAT_H;
+		regl = RT5033_FUEL_REG_VBAT_L;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		regh = RT5033_FUEL_REG_AVG_VOLT_H;
+		regl = RT5033_FUEL_REG_AVG_VOLT_L;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_OCV:
+		regh = RT5033_FUEL_REG_OCV_H;
+		regl = RT5033_FUEL_REG_OCV_L;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	regmap_read(battery->regmap, regh, &msb);
+	regmap_read(battery->regmap, regl, &lsb);
+
+	ret = ((msb << 4) + (lsb >> 4)) * 1250 / 1000;
+
+	return ret;
+}
+
+static int rt5033_battery_get_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		union power_supply_propval *val)
+{
+	struct rt5033_battery *battery = container_of(psy,
+				struct rt5033_battery, psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+	case POWER_SUPPLY_PROP_VOLTAGE_OCV:
+		val->intval = rt5033_battery_get_watt_prop(battery->client,
+									psp);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = rt5033_battery_get_present(battery->client);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = rt5033_battery_get_capacity(battery->client);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static enum power_supply_property rt5033_battery_props[] = {
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_VOLTAGE_OCV,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_CAPACITY,
+};
+
+static struct regmap_config rt5033_battery_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= RT5033_FUEL_REG_END,
+};
+
+static int rt5033_battery_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	struct rt5033_battery *battery;
+	u32 ret;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
+		return -EIO;
+
+	battery = devm_kzalloc(&client->dev, sizeof(*battery), GFP_KERNEL);
+	if (!battery)
+		return -EINVAL;
+
+	battery->client = client;
+	battery->regmap = devm_regmap_init_i2c(client,
+			&rt5033_battery_regmap_config);
+	if (IS_ERR(battery->regmap)) {
+		dev_err(&client->dev, "Failed to initialize regmap\n");
+		return -EINVAL;
+	}
+
+	i2c_set_clientdata(client, battery);
+
+	battery->psy.name		= "rt5033-battery";
+	battery->psy.type		= POWER_SUPPLY_TYPE_BATTERY;
+	battery->psy.get_property	= rt5033_battery_get_property;
+	battery->psy.properties		= rt5033_battery_props;
+	battery->psy.num_properties	= ARRAY_SIZE(rt5033_battery_props);
+
+	ret = power_supply_register(&client->dev, &battery->psy);
+	if (ret) {
+		dev_err(&client->dev, "Failed to register power supply\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rt5033_battery_remove(struct i2c_client *client)
+{
+	struct rt5033_battery *battery = i2c_get_clientdata(client);
+
+	power_supply_unregister(&battery->psy);
+
+	return 0;
+}
+
+static const struct i2c_device_id rt5033_battery_id[] = {
+	{ "rt5033-battery", },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, rt5033_battery_id);
+
+static struct i2c_driver rt5033_battery_driver = {
+	.driver = {
+		.name = "rt5033-battery",
+	},
+	.probe = rt5033_battery_probe,
+	.remove = rt5033_battery_remove,
+	.id_table = rt5033_battery_id,
+};
+module_i2c_driver(rt5033_battery_driver);
+
+MODULE_DESCRIPTION("Richtek RT5033 fuel gauge driver");
+MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
+MODULE_LICENSE("GPL");

drivers/power/test_power.c

@@ -21,6 +21,13 @@
 #include <linux/delay.h>
 #include <linux/vermagic.h>
 
+enum test_power_id {
+	TEST_AC,
+	TEST_BATTERY,
+	TEST_USB,
+	TEST_POWER_NUM,
+};
+
 static int ac_online			= 1;
 static int usb_online			= 1;
 static int battery_status		= POWER_SUPPLY_STATUS_DISCHARGING;
@@ -147,7 +154,7 @@ static char *test_power_ac_supplied_to[] = {
 };
 
 static struct power_supply test_power_supplies[] = {
-	{
+	[TEST_AC] = {
 		.name = "test_ac",
 		.type = POWER_SUPPLY_TYPE_MAINS,
 		.supplied_to = test_power_ac_supplied_to,
@@ -155,13 +162,15 @@ static struct power_supply test_power_supplies[] = {
 		.properties = test_power_ac_props,
 		.num_properties = ARRAY_SIZE(test_power_ac_props),
 		.get_property = test_power_get_ac_property,
-	}, {
+	},
+	[TEST_BATTERY] = {
 		.name = "test_battery",
 		.type = POWER_SUPPLY_TYPE_BATTERY,
 		.properties = test_power_battery_props,
 		.num_properties = ARRAY_SIZE(test_power_battery_props),
 		.get_property = test_power_get_battery_property,
-	}, {
+	},
+	[TEST_USB] = {
 		.name = "test_usb",
 		.type = POWER_SUPPLY_TYPE_USB,
 		.supplied_to = test_power_ac_supplied_to,
@@ -178,6 +187,8 @@ static int __init test_power_init(void)
 	int i;
 	int ret;
 
+	BUILD_BUG_ON(TEST_POWER_NUM != ARRAY_SIZE(test_power_supplies));
+
 	for (i = 0; i < ARRAY_SIZE(test_power_supplies); i++) {
 		ret = power_supply_register(NULL, &test_power_supplies[i]);
 		if (ret) {
@@ -309,7 +320,7 @@ static inline void signal_power_supply_changed(struct power_supply *psy)
 static int param_set_ac_online(const char *key, const struct kernel_param *kp)
 {
 	ac_online = map_get_value(map_ac_online, key, ac_online);
-	signal_power_supply_changed(&test_power_supplies[0]);
+	signal_power_supply_changed(&test_power_supplies[TEST_AC]);
 	return 0;
 }
 
@@ -322,7 +333,7 @@ static int param_get_ac_online(char *buffer, const struct kernel_param *kp)
 static int param_set_usb_online(const char *key, const struct kernel_param *kp)
 {
 	usb_online = map_get_value(map_ac_online, key, usb_online);
-	signal_power_supply_changed(&test_power_supplies[2]);
+	signal_power_supply_changed(&test_power_supplies[TEST_USB]);
 	return 0;
 }
 
@@ -336,7 +347,7 @@ static int param_set_battery_status(const char *key,
 					const struct kernel_param *kp)
 {
 	battery_status = map_get_value(map_status, key, battery_status);
-	signal_power_supply_changed(&test_power_supplies[1]);
+	signal_power_supply_changed(&test_power_supplies[TEST_BATTERY]);
 	return 0;
 }
 
@@ -350,7 +361,7 @@ static int param_set_battery_health(const char *key,
 					const struct kernel_param *kp)
 {
 	battery_health = map_get_value(map_health, key, battery_health);
-	signal_power_supply_changed(&test_power_supplies[1]);
+	signal_power_supply_changed(&test_power_supplies[TEST_BATTERY]);
 	return 0;
 }
 
@@ -364,7 +375,7 @@ static int param_set_battery_present(const char *key,
 					const struct kernel_param *kp)
 {
 	battery_present = map_get_value(map_present, key, battery_present);
-	signal_power_supply_changed(&test_power_supplies[0]);
+	signal_power_supply_changed(&test_power_supplies[TEST_AC]);
 	return 0;
 }
 
@@ -380,7 +391,7 @@ static int param_set_battery_technology(const char *key,
 {
 	battery_technology = map_get_value(map_technology, key,
 						battery_technology);
-	signal_power_supply_changed(&test_power_supplies[1]);
+	signal_power_supply_changed(&test_power_supplies[TEST_BATTERY]);
 	return 0;
 }
 
@@ -401,7 +412,7 @@ static int param_set_battery_capacity(const char *key,
 		return -EINVAL;
 
 	battery_capacity = tmp;
-	signal_power_supply_changed(&test_power_supplies[1]);
+	signal_power_supply_changed(&test_power_supplies[TEST_BATTERY]);
 	return 0;
 }
 
@@ -416,7 +427,7 @@ static int param_set_battery_voltage(const char *key,
 		return -EINVAL;
 
 	battery_voltage = tmp;
-	signal_power_supply_changed(&test_power_supplies[1]);
+	signal_power_supply_changed(&test_power_supplies[TEST_BATTERY]);
 	return 0;
 }
 

include/linux/mfd/abx500/ab8500-bm.h

@@ -461,7 +461,6 @@ struct ab8500_fg;
 #ifdef CONFIG_AB8500_BM
 extern struct abx500_bm_data ab8500_bm_data;
 
-void ab8500_fg_reinit(void);
 void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA);
 struct ab8500_btemp *ab8500_btemp_get(void);
 int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp);

include/linux/mfd/max77693-private.h

@@ -143,10 +143,118 @@ enum max77693_pmic_reg {
 #define FLASH_INT_FLED1_SHORT	BIT(3)
 #define FLASH_INT_OVER_CURRENT	BIT(4)
 
+/* Fast charge timer in in hours */
+#define DEFAULT_FAST_CHARGE_TIMER		4
+/* microamps */
+#define DEFAULT_TOP_OFF_THRESHOLD_CURRENT	150000
+/* minutes */
+#define DEFAULT_TOP_OFF_TIMER			30
+/* microvolts */
+#define DEFAULT_CONSTANT_VOLT			4200000
+/* microvolts */
+#define DEFAULT_MIN_SYSTEM_VOLT			3600000
+/* celsius */
+#define DEFAULT_THERMAL_REGULATION_TEMP		100
+/* microamps */
+#define DEFAULT_BATTERY_OVERCURRENT		3500000
+/* microvolts */
+#define DEFAULT_CHARGER_INPUT_THRESHOLD_VOLT	4300000
+
+/* MAX77693_CHG_REG_CHG_INT_OK register */
+#define CHG_INT_OK_BYP_SHIFT		0
+#define CHG_INT_OK_BAT_SHIFT		3
+#define CHG_INT_OK_CHG_SHIFT		4
+#define CHG_INT_OK_CHGIN_SHIFT		6
+#define CHG_INT_OK_DETBAT_SHIFT		7
+#define CHG_INT_OK_BYP_MASK		BIT(CHG_INT_OK_BYP_SHIFT)
+#define CHG_INT_OK_BAT_MASK		BIT(CHG_INT_OK_BAT_SHIFT)
+#define CHG_INT_OK_CHG_MASK		BIT(CHG_INT_OK_CHG_SHIFT)
+#define CHG_INT_OK_CHGIN_MASK		BIT(CHG_INT_OK_CHGIN_SHIFT)
+#define CHG_INT_OK_DETBAT_MASK		BIT(CHG_INT_OK_DETBAT_SHIFT)
+
+/* MAX77693_CHG_REG_CHG_DETAILS_00 register */
+#define CHG_DETAILS_00_CHGIN_SHIFT	5
+#define CHG_DETAILS_00_CHGIN_MASK	(0x3 << CHG_DETAILS_00_CHGIN_SHIFT)
+
+/* MAX77693_CHG_REG_CHG_DETAILS_01 register */
+#define CHG_DETAILS_01_CHG_SHIFT	0
+#define CHG_DETAILS_01_BAT_SHIFT	4
+#define CHG_DETAILS_01_TREG_SHIFT	7
+#define CHG_DETAILS_01_CHG_MASK		(0xf << CHG_DETAILS_01_CHG_SHIFT)
+#define CHG_DETAILS_01_BAT_MASK		(0x7 << CHG_DETAILS_01_BAT_SHIFT)
+#define CHG_DETAILS_01_TREG_MASK	BIT(7)
+
+/* MAX77693_CHG_REG_CHG_DETAILS_01/CHG field */
+enum max77693_charger_charging_state {
+	MAX77693_CHARGING_PREQUALIFICATION	= 0x0,
+	MAX77693_CHARGING_FAST_CONST_CURRENT,
+	MAX77693_CHARGING_FAST_CONST_VOLTAGE,
+	MAX77693_CHARGING_TOP_OFF,
+	MAX77693_CHARGING_DONE,
+	MAX77693_CHARGING_HIGH_TEMP,
+	MAX77693_CHARGING_TIMER_EXPIRED,
+	MAX77693_CHARGING_THERMISTOR_SUSPEND,
+	MAX77693_CHARGING_OFF,
+	MAX77693_CHARGING_RESERVED,
+	MAX77693_CHARGING_OVER_TEMP,
+	MAX77693_CHARGING_WATCHDOG_EXPIRED,
+};
+
+/* MAX77693_CHG_REG_CHG_DETAILS_01/BAT field */
+enum max77693_charger_battery_state {
+	MAX77693_BATTERY_NOBAT			= 0x0,
+	/* Dead-battery or low-battery prequalification */
+	MAX77693_BATTERY_PREQUALIFICATION,
+	MAX77693_BATTERY_TIMER_EXPIRED,
+	MAX77693_BATTERY_GOOD,
+	MAX77693_BATTERY_LOWVOLTAGE,
+	MAX77693_BATTERY_OVERVOLTAGE,
+	MAX77693_BATTERY_OVERCURRENT,
+	MAX77693_BATTERY_RESERVED,
+};
+
+/* MAX77693_CHG_REG_CHG_DETAILS_02 register */
+#define CHG_DETAILS_02_BYP_SHIFT	0
+#define CHG_DETAILS_02_BYP_MASK		(0xf << CHG_DETAILS_02_BYP_SHIFT)
+
 /* MAX77693 CHG_CNFG_00 register */
 #define CHG_CNFG_00_CHG_MASK		0x1
 #define CHG_CNFG_00_BUCK_MASK		0x4
 
+/* MAX77693_CHG_REG_CHG_CNFG_01 register */
+#define CHG_CNFG_01_FCHGTIME_SHIFT	0
+#define CHG_CNFG_01_CHGRSTRT_SHIFT	4
+#define CHG_CNFG_01_PQEN_SHIFT		7
+#define CHG_CNFG_01_FCHGTIME_MASK	(0x7 << CHG_CNFG_01_FCHGTIME_SHIFT)
+#define CHG_CNFG_01_CHGRSTRT_MASK	(0x3 << CHG_CNFG_01_CHGRSTRT_SHIFT)
+#define CHG_CNFG_01_PQEN_MAKS		BIT(CHG_CNFG_01_PQEN_SHIFT)
+
+/* MAX77693_CHG_REG_CHG_CNFG_03 register */
+#define CHG_CNFG_03_TOITH_SHIFT		0
+#define CHG_CNFG_03_TOTIME_SHIFT	3
+#define CHG_CNFG_03_TOITH_MASK		(0x7 << CHG_CNFG_03_TOITH_SHIFT)
+#define CHG_CNFG_03_TOTIME_MASK		(0x7 << CHG_CNFG_03_TOTIME_SHIFT)
+
+/* MAX77693_CHG_REG_CHG_CNFG_04 register */
+#define CHG_CNFG_04_CHGCVPRM_SHIFT	0
+#define CHG_CNFG_04_MINVSYS_SHIFT	5
+#define CHG_CNFG_04_CHGCVPRM_MASK	(0x1f << CHG_CNFG_04_CHGCVPRM_SHIFT)
+#define CHG_CNFG_04_MINVSYS_MASK	(0x7 << CHG_CNFG_04_MINVSYS_SHIFT)
+
+/* MAX77693_CHG_REG_CHG_CNFG_06 register */
+#define CHG_CNFG_06_CHGPROT_SHIFT	2
+#define CHG_CNFG_06_CHGPROT_MASK	(0x3 << CHG_CNFG_06_CHGPROT_SHIFT)
+
+/* MAX77693_CHG_REG_CHG_CNFG_07 register */
+#define CHG_CNFG_07_REGTEMP_SHIFT	5
+#define CHG_CNFG_07_REGTEMP_MASK	(0x3 << CHG_CNFG_07_REGTEMP_SHIFT)
+
+/* MAX77693_CHG_REG_CHG_CNFG_12 register */
+#define CHG_CNFG_12_B2SOVRC_SHIFT	0
+#define CHG_CNFG_12_VCHGINREG_SHIFT	3
+#define CHG_CNFG_12_B2SOVRC_MASK	(0x7 << CHG_CNFG_12_B2SOVRC_SHIFT)
+#define CHG_CNFG_12_VCHGINREG_MASK	(0x3 << CHG_CNFG_12_VCHGINREG_SHIFT)
+
 /* MAX77693 CHG_CNFG_09 Register */
 #define CHG_CNFG_09_CHGIN_ILIM_MASK	0x7F
 

include/linux/power/charger-manager.h

@@ -17,6 +17,7 @@
 
 #include <linux/power_supply.h>
 #include <linux/extcon.h>
+#include <linux/alarmtimer.h>
 
 enum data_source {
 	CM_BATTERY_PRESENT,
@@ -44,29 +45,6 @@ enum cm_event_types {
 	CM_EVENT_OTHERS,
 };
 
-/**
- * struct charger_global_desc
- * @rtc_name: the name of RTC used to wake up the system from suspend.
- * @rtc_only_wakeup:
- *	If the system is woken up by waekup-sources other than the RTC or
- *	callbacks, Charger Manager should recognize with
- *	rtc_only_wakeup() returning false.
- *	If the RTC given to CM is the only wakeup reason,
- *	rtc_only_wakeup should return true.
- * @assume_timer_stops_in_suspend:
- *	Assume that the jiffy timer stops in suspend-to-RAM.
- *	When enabled, CM does not rely on jiffies value in
- *	suspend_again and assumes that jiffies value does not
- *	change during suspend.
- */
-struct charger_global_desc {
-	char *rtc_name;
-
-	bool (*rtc_only_wakeup)(void);
-
-	bool assume_timer_stops_in_suspend;
-};
-
 /**
  * struct charger_cable
  * @extcon_name: the name of extcon device.
@@ -266,22 +244,14 @@ struct charger_manager {
 	char psy_name_buf[PSY_NAME_MAX + 1];
 	struct power_supply charger_psy;
 
-	bool status_save_ext_pwr_inserted;
-	bool status_save_batt;
-
 	u64 charging_start_time;
 	u64 charging_end_time;
 };
 
 #ifdef CONFIG_CHARGER_MANAGER
-extern int setup_charger_manager(struct charger_global_desc *gd);
-extern bool cm_suspend_again(void);
 extern void cm_notify_event(struct power_supply *psy,
 				enum cm_event_types type, char *msg);
 #else
-static inline int setup_charger_manager(struct charger_global_desc *gd)
-{ return 0; }
-static inline bool cm_suspend_again(void) { return false; }
 static inline void cm_notify_event(struct power_supply *psy,
 				enum cm_event_types type, char *msg) { }
 #endif