octeontx2-pf: Fix NIX_AF_TL3_TL2X_LINKX_CFG register configuration

For packets scheduled to RPM and LBK, NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL]
selects the TL3 or TL2 scheduling level as the one used for link/channel
selection and backpressure. For each scheduling queue at the selected
level: Setting NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG[ENA] = 1 allows
the TL3/TL2 queue to schedule packets to a specified RPM or LBK link
and channel.

There is an issue in the code where NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL]
is set to TL3 where as the NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG is
configured for TL2 queue in some cases. As a result packets will not
transmit on that link/channel. This patch fixes the issue by configuring
the NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG register depending on the
NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL] value.

Fixes: caa2da34 ("octeontx2-pf: Initialize and config queues")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20220802142813.25031-1-naveenm@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c

@@ -632,6 +632,12 @@ int otx2_txschq_config(struct otx2_nic *pfvf, int lvl)
 		req->num_regs++;
 		req->reg[1] = NIX_AF_TL3X_SCHEDULE(schq);
 		req->regval[1] = dwrr_val;
+		if (lvl == hw->txschq_link_cfg_lvl) {
+			req->num_regs++;
+			req->reg[2] = NIX_AF_TL3_TL2X_LINKX_CFG(schq, hw->tx_link);
+			/* Enable this queue and backpressure */
+			req->regval[2] = BIT_ULL(13) | BIT_ULL(12);
+		}
 	} else if (lvl == NIX_TXSCH_LVL_TL2) {
 		parent =  hw->txschq_list[NIX_TXSCH_LVL_TL1][0];
 		req->reg[0] = NIX_AF_TL2X_PARENT(schq);
@@ -641,11 +647,12 @@ int otx2_txschq_config(struct otx2_nic *pfvf, int lvl)
 		req->reg[1] = NIX_AF_TL2X_SCHEDULE(schq);
 		req->regval[1] = TXSCH_TL1_DFLT_RR_PRIO << 24 | dwrr_val;
 
+		if (lvl == hw->txschq_link_cfg_lvl) {
 			req->num_regs++;
 			req->reg[2] = NIX_AF_TL3_TL2X_LINKX_CFG(schq, hw->tx_link);
 			/* Enable this queue and backpressure */
 			req->regval[2] = BIT_ULL(13) | BIT_ULL(12);
-
+		}
 	} else if (lvl == NIX_TXSCH_LVL_TL1) {
 		/* Default config for TL1.
 		 * For VF this is always ignored.
@@ -1591,6 +1598,8 @@ void mbox_handler_nix_txsch_alloc(struct otx2_nic *pf,
 		for (schq = 0; schq < rsp->schq[lvl]; schq++)
 			pf->hw.txschq_list[lvl][schq] =
 				rsp->schq_list[lvl][schq];
+
+	pf->hw.txschq_link_cfg_lvl = rsp->link_cfg_lvl;
 }
 EXPORT_SYMBOL(mbox_handler_nix_txsch_alloc);
 

drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h

@@ -195,6 +195,7 @@ struct otx2_hw {
 	u16			sqb_size;
 
 	/* NIX */
+	u8			txschq_link_cfg_lvl;
 	u16		txschq_list[NIX_TXSCH_LVL_CNT][MAX_TXSCHQ_PER_FUNC];
 	u16			matchall_ipolicer;
 	u32			dwrr_mtu;