Skip to content

L
linux
Commit 141c943f authored by GuanXuetao's avatar GuanXuetao
Browse files
Options

unicore32 core architecture: low level entry and setup codes 

This patch implements low level entry and setup codes.
Signed-off-by: default avatarGuan Xuetao <gxt@mprc.pku.edu.cn>
Reviewed-by: default avatarArnd Bergmann <arnd@arndb.de>
parent 79725df5
Hide whitespace changes
Inline Side-by-side
Showing with 1820 additions and 0 deletions
arch/unicore32/include/asm/traps.h 0 → 100644
View file @ 141c943f
/*
* linux/arch/unicore32/include/asm/traps.h
*
* Code specific to PKUnity SoC and UniCore ISA
*
* Copyright (C) 2001-2010 GUAN Xue-tao
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __UNICORE_TRAP_H__
#define __UNICORE_TRAP_H__
extern void __init early_trap_init(void);
extern void dump_backtrace_entry(unsigned long where,
unsigned long from, unsigned long frame);
extern void do_DataAbort(unsigned long addr, unsigned int fsr,
struct pt_regs *regs);
#endif
arch/unicore32/kernel/entry.S 0 → 100644
View file @ 141c943f
/*
* linux/arch/unicore32/kernel/entry.S
*
* Code specific to PKUnity SoC and UniCore ISA
*
* Copyright (C) 2001-2010 GUAN Xue-tao
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Low-level vector interface routines
*/
#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/errno.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
#include <asm/unistd.h>
#include <generated/asm-offsets.h>
#include "debug-macro.S"
@
@ Most of the stack format comes from struct pt_regs, but with
@ the addition of 8 bytes for storing syscall args 5 and 6.
@
#define S_OFF 8
/*
* The SWI code relies on the fact that R0 is at the bottom of the stack
* (due to slow/fast restore user regs).
*/
#if S_R0 != 0
#error "Please fix"
#endif
.macro zero_fp
#ifdef CONFIG_FRAME_POINTER
mov fp, #0
#endif
.endm
.macro alignment_trap, rtemp
#ifdef CONFIG_ALIGNMENT_TRAP
ldw \rtemp, .LCcralign
ldw \rtemp, [\rtemp]
movc p0.c1, \rtemp, #0
#endif
.endm
.macro load_user_sp_lr, rd, rtemp, offset = 0
mov \rtemp, asr
xor \rtemp, \rtemp, #(PRIV_MODE ^ SUSR_MODE)
mov.a asr, \rtemp @ switch to the SUSR mode
ldw sp, [\rd+], #\offset @ load sp_user
ldw lr, [\rd+], #\offset + 4 @ load lr_user
xor \rtemp, \rtemp, #(PRIV_MODE ^ SUSR_MODE)
mov.a asr, \rtemp @ switch back to the PRIV mode
.endm
.macro priv_exit, rpsr
mov.a bsr, \rpsr
ldm.w (r0 - r15), [sp]+
ldm.b (r16 - pc), [sp]+ @ load r0 - pc, asr
.endm
.macro restore_user_regs, fast = 0, offset = 0
ldw r1, [sp+], #\offset + S_PSR @ get calling asr
ldw lr, [sp+], #\offset + S_PC @ get pc
mov.a bsr, r1 @ save in bsr_priv
.if \fast
add sp, sp, #\offset + S_R1 @ r0 is syscall return value
ldm.w (r1 - r15), [sp]+ @ get calling r1 - r15
ldur (r16 - lr), [sp]+ @ get calling r16 - lr
.else
ldm.w (r0 - r15), [sp]+ @ get calling r0 - r15
ldur (r16 - lr), [sp]+ @ get calling r16 - lr
.endif
nop
add sp, sp, #S_FRAME_SIZE - S_R16
mov.a pc, lr @ return
@ and move bsr_priv into asr
.endm
.macro get_thread_info, rd
mov \rd, sp >> #13
mov \rd, \rd << #13
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldw \base, =(io_p2v(PKUNITY_INTC_BASE))
ldw \irqstat, [\base+], #0xC @ INTC_ICIP
ldw \tmp, [\base+], #0x4 @ INTC_ICMR
and.a \irqstat, \irqstat, \tmp
beq 1001f
cntlz \irqnr, \irqstat
rsub \irqnr, \irqnr, #31
1001: /* EQ will be set if no irqs pending */
.endm
#ifdef CONFIG_DEBUG_LL
.macro printreg, reg, temp
adr \temp, 901f
stm (r0-r3), [\temp]+
stw lr, [\temp+], #0x10
mov r0, \reg
b.l printhex8
mov r0, #':'
b.l printch
mov r0, pc
b.l printhex8
adr r0, 902f
b.l printascii
adr \temp, 901f
ldm (r0-r3), [\temp]+
ldw lr, [\temp+], #0x10
b 903f
901: .word 0, 0, 0, 0, 0 @ r0-r3, lr
902: .asciz ": epip4d\n"
.align
903:
.endm
#endif
/*
* These are the registers used in the syscall handler, and allow us to
* have in theory up to 7 arguments to a function - r0 to r6.
*
* Note that tbl == why is intentional.
*
* We must set at least "tsk" and "why" when calling ret_with_reschedule.
*/
scno .req r21 @ syscall number
tbl .req r22 @ syscall table pointer
why .req r22 @ Linux syscall (!= 0)
tsk .req r23 @ current thread_info
/*
* Interrupt handling. Preserves r17, r18, r19
*/
.macro intr_handler
1: get_irqnr_and_base r0, r6, r5, lr
beq 2f
mov r1, sp
@
@ routine called with r0 = irq number, r1 = struct pt_regs *
@
adr lr, 1b
b asm_do_IRQ
2:
.endm
/*
* PRIV mode handlers
*/
.macro priv_entry
sub sp, sp, #(S_FRAME_SIZE - 4)
stm (r1 - r15), [sp]+
add r5, sp, #S_R15
stm (r16 - r28), [r5]+
ldm (r1 - r3), [r0]+
add r5, sp, #S_SP - 4 @ here for interlock avoidance
mov r4, #-1 @ "" "" "" ""
add r0, sp, #(S_FRAME_SIZE - 4)
stw.w r1, [sp+], #-4 @ save the "real" r0 copied
@ from the exception stack
mov r1, lr
@
@ We are now ready to fill in the remaining blanks on the stack:
@
@ r0 - sp_priv
@ r1 - lr_priv
@ r2 - lr_<exception>, already fixed up for correct return/restart
@ r3 - bsr_<exception>
@ r4 - orig_r0 (see pt_regs definition in ptrace.h)
@
stm (r0 - r4), [r5]+
.endm
/*
* User mode handlers
*
*/
.macro user_entry
sub sp, sp, #S_FRAME_SIZE
stm (r1 - r15), [sp+]
add r4, sp, #S_R16
stm (r16 - r28), [r4]+
ldm (r1 - r3), [r0]+
add r0, sp, #S_PC @ here for interlock avoidance
mov r4, #-1 @ "" "" "" ""
stw r1, [sp] @ save the "real" r0 copied
@ from the exception stack
@
@ We are now ready to fill in the remaining blanks on the stack:
@
@ r2 - lr_<exception>, already fixed up for correct return/restart
@ r3 - bsr_<exception>
@ r4 - orig_r0 (see pt_regs definition in ptrace.h)
@
@ Also, separately save sp_user and lr_user
@
stm (r2 - r4), [r0]+
stur (sp, lr), [r0-]
@
@ Enable the alignment trap while in kernel mode
@
alignment_trap r0
@
@ Clear FP to mark the first stack frame
@
zero_fp
.endm
.text
@
@ __invalid - generic code for failed exception
@ (re-entrant version of handlers)
@
__invalid:
sub sp, sp, #S_FRAME_SIZE
stm (r1 - r15), [sp+]
add r1, sp, #S_R16
stm (r16 - r28, sp, lr), [r1]+
zero_fp
ldm (r4 - r6), [r0]+
add r0, sp, #S_PC @ here for interlock avoidance
mov r7, #-1 @ "" "" "" ""
stw r4, [sp] @ save preserved r0
stm (r5 - r7), [r0]+ @ lr_<exception>,
@ asr_<exception>, "old_r0"
mov r0, sp
mov r1, asr
b bad_mode
ENDPROC(__invalid)
.align 5
__dabt_priv:
priv_entry
@
@ get ready to re-enable interrupts if appropriate
@
mov r17, asr
cand.a r3, #PSR_I_BIT
bne 1f
andn r17, r17, #PSR_I_BIT
1:
@
@ Call the processor-specific abort handler:
@
@ r2 - aborted context pc
@ r3 - aborted context asr
@
@ The abort handler must return the aborted address in r0, and
@ the fault status register in r1.
@
movc r1, p0.c3, #0 @ get FSR
movc r0, p0.c4, #0 @ get FAR
@
@ set desired INTR state, then call main handler
@
mov.a asr, r17
mov r2, sp
b.l do_DataAbort
@
@ INTRs off again before pulling preserved data off the stack
@
disable_irq r0
@
@ restore BSR and restart the instruction
@
ldw r2, [sp+], #S_PSR
priv_exit r2 @ return from exception
ENDPROC(__dabt_priv)
.align 5
__intr_priv:
priv_entry
intr_handler
mov r0, #0 @ epip4d
movc p0.c5, r0, #14
nop; nop; nop; nop; nop; nop; nop; nop
ldw r4, [sp+], #S_PSR @ irqs are already disabled
priv_exit r4 @ return from exception
ENDPROC(__intr_priv)
.ltorg
.align 5
__extn_priv:
priv_entry
mov r0, sp @ struct pt_regs *regs
mov r1, asr
b bad_mode @ not supported
ENDPROC(__extn_priv)
.align 5
__pabt_priv:
priv_entry
@
@ re-enable interrupts if appropriate
@
mov r17, asr
cand.a r3, #PSR_I_BIT
bne 1f
andn r17, r17, #PSR_I_BIT
1:
@
@ set args, then call main handler
@
@ r0 - address of faulting instruction
@ r1 - pointer to registers on stack
@
mov r0, r2 @ pass address of aborted instruction
mov r1, #5
mov.a asr, r17
mov r2, sp @ regs
b.l do_PrefetchAbort @ call abort handler
@
@ INTRs off again before pulling preserved data off the stack
@
disable_irq r0
@
@ restore BSR and restart the instruction
@
ldw r2, [sp+], #S_PSR
priv_exit r2 @ return from exception
ENDPROC(__pabt_priv)
.align 5
.LCcralign:
.word cr_alignment
.align 5
__dabt_user:
user_entry
#ifdef CONFIG_UNICORE_FPU_F64
cff ip, s31
cand.a ip, #0x08000000 @ FPU execption traps?
beq 209f
ldw ip, [sp+], #S_PC
add ip, ip, #4
stw ip, [sp+], #S_PC
@
@ fall through to the emulation code, which returns using r19 if
@ it has emulated the instruction, or the more conventional lr
@ if we are to treat this as a real extended instruction
@
@ r0 - instruction
@
1: ldw.u r0, [r2]
adr r19, ret_from_exception
adr lr, 209f
@
@ fallthrough to call do_uc_f64
@
/*
* Check whether the instruction is a co-processor instruction.
* If yes, we need to call the relevant co-processor handler.
*
* Note that we don't do a full check here for the co-processor
* instructions; all instructions with bit 27 set are well
* defined. The only instructions that should fault are the
* co-processor instructions.
*
* Emulators may wish to make use of the following registers:
* r0 = instruction opcode.
* r2 = PC
* r19 = normal "successful" return address
* r20 = this threads thread_info structure.
* lr = unrecognised instruction return address
*/
get_thread_info r20 @ get current thread
and r8, r0, #0x00003c00 @ mask out CP number
mov r7, #1
stb r7, [r20+], #TI_USED_CP + 2 @ set appropriate used_cp[]
@ F64 hardware support entry point.
@ r0 = faulted instruction
@ r19 = return address
@ r20 = fp_state
enable_irq r4
add r20, r20, #TI_FPSTATE @ r20 = workspace
cff r1, s31 @ get fpu FPSCR
andn r2, r1, #0x08000000
ctf r2, s31 @ clear 27 bit
mov r2, sp @ nothing stacked - regdump is at TOS
mov lr, r19 @ setup for a return to the user code
@ Now call the C code to package up the bounce to the support code
@ r0 holds the trigger instruction
@ r1 holds the FPSCR value
@ r2 pointer to register dump
b ucf64_exchandler
209:
#endif
@
@ Call the processor-specific abort handler:
@
@ r2 - aborted context pc
@ r3 - aborted context asr
@
@ The abort handler must return the aborted address in r0, and
@ the fault status register in r1.
@
movc r1, p0.c3, #0 @ get FSR
movc r0, p0.c4, #0 @ get FAR
@
@ INTRs on, then call the main handler
@
enable_irq r2
mov r2, sp
adr lr, ret_from_exception
b do_DataAbort
ENDPROC(__dabt_user)
.align 5
__intr_user:
user_entry
get_thread_info tsk
intr_handler
mov why, #0
b ret_to_user
ENDPROC(__intr_user)
.ltorg
.align 5
__extn_user:
user_entry
mov r0, sp
mov r1, asr
b bad_mode
ENDPROC(__extn_user)
.align 5
__pabt_user:
user_entry
mov r0, r2 @ pass address of aborted instruction.
mov r1, #5
enable_irq r1 @ Enable interrupts
mov r2, sp @ regs
b.l do_PrefetchAbort @ call abort handler
/* fall through */
/*
* This is the return code to user mode for abort handlers
*/
ENTRY(ret_from_exception)
get_thread_info tsk
mov why, #0
b ret_to_user
ENDPROC(__pabt_user)
ENDPROC(ret_from_exception)
/*
* Register switch for UniCore V2 processors
* r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info
* previous and next are guaranteed not to be the same.
*/
ENTRY(__switch_to)
add ip, r1, #TI_CPU_SAVE
stm.w (r4 - r15), [ip]+
stm.w (r16 - r27, sp, lr), [ip]+
#ifdef CONFIG_UNICORE_FPU_F64
add ip, r1, #TI_FPSTATE
sfm.w (f0 - f7 ), [ip]+
sfm.w (f8 - f15), [ip]+
sfm.w (f16 - f23), [ip]+
sfm.w (f24 - f31), [ip]+
cff r4, s31
stw r4, [ip]
add ip, r2, #TI_FPSTATE
lfm.w (f0 - f7 ), [ip]+
lfm.w (f8 - f15), [ip]+
lfm.w (f16 - f23), [ip]+
lfm.w (f24 - f31), [ip]+
ldw r4, [ip]
ctf r4, s31
#endif
add ip, r2, #TI_CPU_SAVE
ldm.w (r4 - r15), [ip]+
ldm (r16 - r27, sp, pc), [ip]+ @ Load all regs saved previously
ENDPROC(__switch_to)
.align 5
/*
* This is the fast syscall return path. We do as little as
* possible here, and this includes saving r0 back into the PRIV
* stack.
*/
ret_fast_syscall:
disable_irq r1 @ disable interrupts
ldw r1, [tsk+], #TI_FLAGS
cand.a r1, #_TIF_WORK_MASK
bne fast_work_pending
@ fast_restore_user_regs
restore_user_regs fast = 1, offset = S_OFF
/*
* Ok, we need to do extra processing, enter the slow path.
*/
fast_work_pending:
stw.w r0, [sp+], #S_R0+S_OFF @ returned r0
work_pending:
cand.a r1, #_TIF_NEED_RESCHED
bne work_resched
cand.a r1, #_TIF_SIGPENDING|_TIF_NOTIFY_RESUME
beq no_work_pending
mov r0, sp @ 'regs'
mov r2, why @ 'syscall'
cand.a r1, #_TIF_SIGPENDING @ delivering a signal?
cmovne why, #0 @ prevent further restarts
b.l do_notify_resume
b ret_slow_syscall @ Check work again
work_resched:
b.l schedule
/*
* "slow" syscall return path. "why" tells us if this was a real syscall.
*/
ENTRY(ret_to_user)
ret_slow_syscall:
disable_irq r1 @ disable interrupts
get_thread_info tsk @ epip4d, one path error?!
ldw r1, [tsk+], #TI_FLAGS
cand.a r1, #_TIF_WORK_MASK
bne work_pending
no_work_pending:
@ slow_restore_user_regs
restore_user_regs fast = 0, offset = 0
ENDPROC(ret_to_user)
/*
* This is how we return from a fork.
*/
ENTRY(ret_from_fork)
b.l schedule_tail
get_thread_info tsk
ldw r1, [tsk+], #TI_FLAGS @ check for syscall tracing
mov why, #1
cand.a r1, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
beq ret_slow_syscall
mov r1, sp
mov r0, #1 @ trace exit [IP = 1]
b.l syscall_trace
b ret_slow_syscall
ENDPROC(ret_from_fork)
/*=============================================================================
* SWI handler
*-----------------------------------------------------------------------------
*/
.align 5
ENTRY(vector_swi)
sub sp, sp, #S_FRAME_SIZE
stm (r0 - r15), [sp]+ @ Calling r0 - r15
add r8, sp, #S_R16
stm (r16 - r28), [r8]+ @ Calling r16 - r28
add r8, sp, #S_PC
stur (sp, lr), [r8-] @ Calling sp, lr
mov r8, bsr @ called from non-REAL mode
stw lr, [sp+], #S_PC @ Save calling PC
stw r8, [sp+], #S_PSR @ Save ASR
stw r0, [sp+], #S_OLD_R0 @ Save OLD_R0
zero_fp
/*
* Get the system call number.
*/
sub ip, lr, #4
ldw.u scno, [ip] @ get SWI instruction
#ifdef CONFIG_ALIGNMENT_TRAP
ldw ip, __cr_alignment
ldw ip, [ip]
movc p0.c1, ip, #0 @ update control register
#endif
enable_irq ip
get_thread_info tsk
ldw tbl, =sys_call_table @ load syscall table pointer
andn scno, scno, #0xff000000 @ mask off SWI op-code
andn scno, scno, #0x00ff0000 @ mask off SWI op-code
stm.w (r4, r5), [sp-] @ push fifth and sixth args
ldw ip, [tsk+], #TI_FLAGS @ check for syscall tracing
cand.a ip, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
bne __sys_trace
csub.a scno, #__NR_syscalls @ check upper syscall limit
adr lr, ret_fast_syscall @ return address
bea 1f
ldw pc, [tbl+], scno << #2 @ call sys_* routine
1:
add r1, sp, #S_OFF
2: mov why, #0 @ no longer a real syscall
b sys_ni_syscall @ not private func
/*
* This is the really slow path. We're going to be doing
* context switches, and waiting for our parent to respond.
*/
__sys_trace:
mov r2, scno
add r1, sp, #S_OFF
mov r0, #0 @ trace entry [IP = 0]
b.l syscall_trace
adr lr, __sys_trace_return @ return address
mov scno, r0 @ syscall number (possibly new)
add r1, sp, #S_R0 + S_OFF @ pointer to regs
csub.a scno, #__NR_syscalls @ check upper syscall limit
bea 2b
ldm (r0 - r3), [r1]+ @ have to reload r0 - r3
ldw pc, [tbl+], scno << #2 @ call sys_* routine
__sys_trace_return:
stw.w r0, [sp+], #S_R0 + S_OFF @ save returned r0
mov r2, scno
mov r1, sp
mov r0, #1 @ trace exit [IP = 1]
b.l syscall_trace
b ret_slow_syscall
.align 5
#ifdef CONFIG_ALIGNMENT_TRAP
.type __cr_alignment, #object
__cr_alignment:
.word cr_alignment
#endif
.ltorg
ENTRY(sys_execve)
add r3, sp, #S_OFF
b __sys_execve
ENDPROC(sys_execve)
ENTRY(sys_clone)
add ip, sp, #S_OFF
stw ip, [sp+], #4
b __sys_clone
ENDPROC(sys_clone)
ENTRY(sys_rt_sigreturn)
add r0, sp, #S_OFF
mov why, #0 @ prevent syscall restart handling
b __sys_rt_sigreturn
ENDPROC(sys_rt_sigreturn)
ENTRY(sys_sigaltstack)
ldw r2, [sp+], #S_OFF + S_SP
b do_sigaltstack
ENDPROC(sys_sigaltstack)
__INIT
/*
* Vector stubs.
*
* This code is copied to 0xffff0200 so we can use branches in the
* vectors, rather than ldr's. Note that this code must not
* exceed 0x300 bytes.
*
* Common stub entry macro:
* Enter in INTR mode, bsr = PRIV/USER ASR, lr = PRIV/USER PC
*
* SP points to a minimal amount of processor-private memory, the address
* of which is copied into r0 for the mode specific abort handler.
*/
.macro vector_stub, name, mode
.align 5
vector_\name:
@
@ Save r0, lr_<exception> (parent PC) and bsr_<exception>
@ (parent ASR)
@
stw r0, [sp]
stw lr, [sp+], #4 @ save r0, lr
mov lr, bsr
stw lr, [sp+], #8 @ save bsr
@
@ Prepare for PRIV mode. INTRs remain disabled.
@
mov r0, asr
xor r0, r0, #(\mode ^ PRIV_MODE)
mov.a bsr, r0
@
@ the branch table must immediately follow this code
@
and lr, lr, #0x03
add lr, lr, #1
mov r0, sp
ldw lr, [pc+], lr << #2
mov.a pc, lr @ branch to handler in PRIV mode
ENDPROC(vector_\name)
.align 2
@ handler addresses follow this label
.endm
.globl __stubs_start
__stubs_start:
/*
* Interrupt dispatcher
*/
vector_stub intr, INTR_MODE
.long __intr_user @ 0 (USER)
.long __invalid @ 1
.long __invalid @ 2
.long __intr_priv @ 3 (PRIV)
/*
* Data abort dispatcher
* Enter in ABT mode, bsr = USER ASR, lr = USER PC
*/
vector_stub dabt, ABRT_MODE
.long __dabt_user @ 0 (USER)
.long __invalid @ 1
.long __invalid @ 2 (INTR)
.long __dabt_priv @ 3 (PRIV)
/*
* Prefetch abort dispatcher
* Enter in ABT mode, bsr = USER ASR, lr = USER PC
*/
vector_stub pabt, ABRT_MODE
.long __pabt_user @ 0 (USER)
.long __invalid @ 1
.long __invalid @ 2 (INTR)
.long __pabt_priv @ 3 (PRIV)
/*
* Undef instr entry dispatcher
* Enter in EXTN mode, bsr = PRIV/USER ASR, lr = PRIV/USER PC
*/
vector_stub extn, EXTN_MODE
.long __extn_user @ 0 (USER)
.long __invalid @ 1
.long __invalid @ 2 (INTR)
.long __extn_priv @ 3 (PRIV)
/*
* We group all the following data together to optimise
* for CPUs with separate I & D caches.
*/
.align 5
.LCvswi:
.word vector_swi
.globl __stubs_end
__stubs_end:
.equ stubs_offset, __vectors_start + 0x200 - __stubs_start
.globl __vectors_start
__vectors_start:
jepriv SYS_ERROR0
b vector_extn + stubs_offset
ldw pc, .LCvswi + stubs_offset
b vector_pabt + stubs_offset
b vector_dabt + stubs_offset
jepriv SYS_ERROR0
b vector_intr + stubs_offset
jepriv SYS_ERROR0
.globl __vectors_end
__vectors_end:
.data
.globl cr_alignment
.globl cr_no_alignment
cr_alignment:
.space 4
cr_no_alignment:
.space 4
arch/unicore32/kernel/head.S 0 → 100644
View file @ 141c943f
/*
* linux/arch/unicore32/kernel/head.S
*
* Code specific to PKUnity SoC and UniCore ISA
*
* Copyright (C) 2001-2010 GUAN Xue-tao
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/ptrace.h>
#include <generated/asm-offsets.h>
#include <asm/memory.h>
#include <asm/thread_info.h>
#include <asm/system.h>
#include <asm/pgtable-hwdef.h>
#if (PHYS_OFFSET & 0x003fffff)
#error "PHYS_OFFSET must be at an even 4MiB boundary!"
#endif
#define KERNEL_RAM_VADDR (PAGE_OFFSET + KERNEL_IMAGE_START)
#define KERNEL_RAM_PADDR (PHYS_OFFSET + KERNEL_IMAGE_START)
#define KERNEL_PGD_PADDR (KERNEL_RAM_PADDR - 0x1000)
#define KERNEL_PGD_VADDR (KERNEL_RAM_VADDR - 0x1000)
#define KERNEL_START KERNEL_RAM_VADDR
#define KERNEL_END _end
/*
* swapper_pg_dir is the virtual address of the initial page table.
* We place the page tables 4K below KERNEL_RAM_VADDR. Therefore, we must
* make sure that KERNEL_RAM_VADDR is correctly set. Currently, we expect
* the least significant 16 bits to be 0x8000, but we could probably
* relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x1000.
*/
#if (KERNEL_RAM_VADDR & 0xffff) != 0x8000
#error KERNEL_RAM_VADDR must start at 0xXXXX8000
#endif
.globl swapper_pg_dir
.equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x1000
/*
* Kernel startup entry point.
* ---------------------------
*
* This is normally called from the decompressor code. The requirements
* are: MMU = off, D-cache = off, I-cache = dont care
*
* This code is mostly position independent, so if you link the kernel at
* 0xc0008000, you call this at __pa(0xc0008000).
*/
__HEAD
ENTRY(stext)
@ set asr
mov r0, #PRIV_MODE @ ensure priv mode
or r0, #PSR_R_BIT | PSR_I_BIT @ disable irqs
mov.a asr, r0
@ process identify
movc r0, p0.c0, #0 @ cpuid
movl r1, 0xff00ffff @ mask
movl r2, 0x4d000863 @ value
and r0, r1, r0
cxor.a r0, r2
bne __error_p @ invalid processor id
/*
* Clear the 4K level 1 swapper page table
*/
movl r0, #KERNEL_PGD_PADDR @ page table address
mov r1, #0
add r2, r0, #0x1000
101: stw.w r1, [r0]+, #4
stw.w r1, [r0]+, #4
stw.w r1, [r0]+, #4
stw.w r1, [r0]+, #4
cxor.a r0, r2
bne 101b
movl r4, #KERNEL_PGD_PADDR @ page table address
mov r7, #PMD_TYPE_SECT | PMD_PRESENT @ page size: section
or r7, r7, #PMD_SECT_CACHEABLE @ cacheable
or r7, r7, #PMD_SECT_READ | PMD_SECT_WRITE | PMD_SECT_EXEC
/*
* Create identity mapping for first 4MB of kernel to
* cater for the MMU enable. This identity mapping
* will be removed by paging_init(). We use our current program
* counter to determine corresponding section base address.
*/
mov r6, pc
mov r6, r6 >> #22 @ start of kernel section
or r1, r7, r6 << #22 @ flags + kernel base
stw r1, [r4+], r6 << #2 @ identity mapping
/*
* Now setup the pagetables for our kernel direct
* mapped region.
*/
add r0, r4, #(KERNEL_START & 0xff000000) >> 20
stw.w r1, [r0+], #(KERNEL_START & 0x00c00000) >> 20
movl r6, #(KERNEL_END - 1)
add r0, r0, #4
add r6, r4, r6 >> #20
102: csub.a r0, r6
add r1, r1, #1 << 22
bua 103f
stw.w r1, [r0]+, #4
b 102b
103:
/*
* Then map first 4MB of ram in case it contains our boot params.
*/
add r0, r4, #PAGE_OFFSET >> 20
or r6, r7, #(PHYS_OFFSET & 0xffc00000)
stw r6, [r0]
ldw r15, __switch_data @ address to jump to after
/*
* Initialise TLB, Caches, and MMU state ready to switch the MMU
* on.
*/
mov r0, #0
movc p0.c5, r0, #28 @ cache invalidate all
nop8
movc p0.c6, r0, #6 @ TLB invalidate all
nop8
/*
* ..V. .... ..TB IDAM
* ..1. .... ..01 1111
*/
movl r0, #0x201f @ control register setting
/*
* Setup common bits before finally enabling the MMU. Essentially
* this is just loading the page table pointer and domain access
* registers.
*/
#ifndef CONFIG_ALIGNMENT_TRAP
andn r0, r0, #CR_A
#endif
#ifdef CONFIG_CPU_DCACHE_DISABLE
andn r0, r0, #CR_D
#endif
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
andn r0, r0, #CR_B
#endif
#ifdef CONFIG_CPU_ICACHE_DISABLE
andn r0, r0, #CR_I
#endif
movc p0.c2, r4, #0 @ set pgd
b __turn_mmu_on
ENDPROC(stext)
/*
* Enable the MMU. This completely changes the stucture of the visible
* memory space. You will not be able to trace execution through this.
*
* r0 = cp#0 control register
* r15 = *virtual* address to jump to upon completion
*/
.align 5
__turn_mmu_on:
mov r0, r0
movc p0.c1, r0, #0 @ write control reg
nop @ fetch inst by phys addr
mov pc, r15
nop8 @ fetch inst by phys addr
ENDPROC(__turn_mmu_on)
/*
* Setup the initial page tables. We only setup the barest
* amount which are required to get the kernel running, which
* generally means mapping in the kernel code.
*
* r9 = cpuid
* r10 = procinfo
*
* Returns:
* r0, r3, r6, r7 corrupted
* r4 = physical page table address
*/
.ltorg
.align 2
.type __switch_data, %object
__switch_data:
.long __mmap_switched
.long __bss_start @ r6
.long _end @ r7
.long cr_alignment @ r8
.long init_thread_union + THREAD_START_SP @ sp
/*
* The following fragment of code is executed with the MMU on in MMU mode,
* and uses absolute addresses; this is not position independent.
*
* r0 = cp#0 control register
*/
__mmap_switched:
adr r3, __switch_data + 4
ldm.w (r6, r7, r8), [r3]+
ldw sp, [r3]
mov fp, #0 @ Clear BSS (and zero fp)
203: csub.a r6, r7
bea 204f
stw.w fp, [r6]+,#4
b 203b
204:
andn r1, r0, #CR_A @ Clear 'A' bit
stm (r0, r1), [r8]+ @ Save control register values
b start_kernel
ENDPROC(__mmap_switched)
/*
* Exception handling. Something went wrong and we can't proceed. We
* ought to tell the user, but since we don't have any guarantee that
* we're even running on the right architecture, we do virtually nothing.
*
* If CONFIG_DEBUG_LL is set we try to print out something about the error
* and hope for the best (useful if bootloader fails to pass a proper
* machine ID for example).
*/
__error_p:
#ifdef CONFIG_DEBUG_LL
adr r0, str_p1
b.l printascii
mov r0, r9
b.l printhex8
adr r0, str_p2
b.l printascii
901: nop8
b 901b
str_p1: .asciz "\nError: unrecognized processor variant (0x"
str_p2: .asciz ").\n"
.align
#endif
ENDPROC(__error_p)
arch/unicore32/kernel/setup.c 0 → 100644
View file @ 141c943f
/*
* linux/arch/unicore32/kernel/setup.c
*
* Code specific to PKUnity SoC and UniCore ISA
*
* Copyright (C) 2001-2010 GUAN Xue-tao
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/utsname.h>
#include <linux/initrd.h>
#include <linux/console.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/screen_info.h>
#include <linux/init.h>
#include <linux/root_dev.h>
#include <linux/cpu.h>
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <linux/fs.h>
#include <linux/proc_fs.h>
#include <linux/memblock.h>
#include <linux/elf.h>
#include <linux/io.h>
#include <asm/cputype.h>
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm/traps.h>
#include "setup.h"
#ifndef MEM_SIZE
#define MEM_SIZE (16*1024*1024)
#endif
struct stack {
u32 irq[3];
u32 abt[3];
u32 und[3];
} ____cacheline_aligned;
static struct stack stacks[NR_CPUS];
char elf_platform[ELF_PLATFORM_SIZE];
EXPORT_SYMBOL(elf_platform);
static char __initdata cmd_line[COMMAND_LINE_SIZE];
static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
/*
* Standard memory resources
*/
static struct resource mem_res[] = {
{
.name = "Video RAM",
.start = 0,
.end = 0,
.flags = IORESOURCE_MEM
},
{
.name = "Kernel text",
.start = 0,
.end = 0,
.flags = IORESOURCE_MEM
},
{
.name = "Kernel data",
.start = 0,
.end = 0,
.flags = IORESOURCE_MEM
}
};
#define video_ram mem_res[0]
#define kernel_code mem_res[1]
#define kernel_data mem_res[2]
/*
* These functions re-use the assembly code in head.S, which
* already provide the required functionality.
*/
static void __init setup_processor(void)
{
printk(KERN_DEFAULT "CPU: UniCore-II [%08x] revision %d, cr=%08lx\n",
uc32_cpuid, (int)(uc32_cpuid >> 16) & 15, cr_alignment);
sprintf(init_utsname()->machine, "puv3");
sprintf(elf_platform, "ucv2");
}
/*
* cpu_init - initialise one CPU.
*
* cpu_init sets up the per-CPU stacks.
*/
void cpu_init(void)
{
unsigned int cpu = smp_processor_id();
struct stack *stk = &stacks[cpu];
/*
* setup stacks for re-entrant exception handlers
*/
__asm__ (
"mov.a asr, %1\n\t"
"add sp, %0, %2\n\t"
"mov.a asr, %3\n\t"
"add sp, %0, %4\n\t"
"mov.a asr, %5\n\t"
"add sp, %0, %6\n\t"
"mov.a asr, %7"
:
: "r" (stk),
"r" (PSR_R_BIT | PSR_I_BIT | INTR_MODE),
"I" (offsetof(struct stack, irq[0])),
"r" (PSR_R_BIT | PSR_I_BIT | ABRT_MODE),
"I" (offsetof(struct stack, abt[0])),
"r" (PSR_R_BIT | PSR_I_BIT | EXTN_MODE),
"I" (offsetof(struct stack, und[0])),
"r" (PSR_R_BIT | PSR_I_BIT | PRIV_MODE)
: "r30", "cc");
}
static int __init uc32_add_memory(unsigned long start, unsigned long size)
{
struct membank *bank = &meminfo.bank[meminfo.nr_banks];
if (meminfo.nr_banks >= NR_BANKS) {
printk(KERN_CRIT "NR_BANKS too low, "
"ignoring memory at %#lx\n", start);
return -EINVAL;
}
/*
* Ensure that start/size are aligned to a page boundary.
* Size is appropriately rounded down, start is rounded up.
*/
size -= start & ~PAGE_MASK;
bank->start = PAGE_ALIGN(start);
bank->size = size & PAGE_MASK;
/*
* Check whether this memory region has non-zero size or
* invalid node number.
*/
if (bank->size == 0)
return -EINVAL;
meminfo.nr_banks++;
return 0;
}
/*
* Pick out the memory size. We look for mem=size@start,
* where start and size are "size[KkMm]"
*/
static int __init early_mem(char *p)
{
static int usermem __initdata = 1;
unsigned long size, start;
char *endp;
/*
* If the user specifies memory size, we
* blow away any automatically generated
* size.
*/
if (usermem) {
usermem = 0;
meminfo.nr_banks = 0;
}
start = PHYS_OFFSET;
size = memparse(p, &endp);
if (*endp == '@')
start = memparse(endp + 1, NULL);
uc32_add_memory(start, size);
return 0;
}
early_param("mem", early_mem);
static void __init
request_standard_resources(struct meminfo *mi)
{
struct resource *res;
int i;
kernel_code.start = virt_to_phys(_stext);
kernel_code.end = virt_to_phys(_etext - 1);
kernel_data.start = virt_to_phys(_sdata);
kernel_data.end = virt_to_phys(_end - 1);
for (i = 0; i < mi->nr_banks; i++) {
if (mi->bank[i].size == 0)
continue;
res = alloc_bootmem_low(sizeof(*res));
res->name = "System RAM";
res->start = mi->bank[i].start;
res->end = mi->bank[i].start + mi->bank[i].size - 1;
res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
request_resource(&iomem_resource, res);
if (kernel_code.start >= res->start &&
kernel_code.end <= res->end)
request_resource(res, &kernel_code);
if (kernel_data.start >= res->start &&
kernel_data.end <= res->end)
request_resource(res, &kernel_data);
}
video_ram.start = PKUNITY_UNIGFX_MMAP_BASE;
video_ram.end = PKUNITY_UNIGFX_MMAP_BASE + PKUNITY_UNIGFX_MMAP_SIZE;
request_resource(&iomem_resource, &video_ram);
}
static void (*init_machine)(void) __initdata;
static int __init customize_machine(void)
{
/* customizes platform devices, or adds new ones */
if (init_machine)
init_machine();
return 0;
}
arch_initcall(customize_machine);
void __init setup_arch(char **cmdline_p)
{
char *from = default_command_line;
setup_processor();
init_mm.start_code = (unsigned long) _stext;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = (unsigned long) _end;
/* parse_early_param needs a boot_command_line */
strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
/* populate cmd_line too for later use, preserving boot_command_line */
strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = cmd_line;
parse_early_param();
uc32_memblock_init(&meminfo);
paging_init();
request_standard_resources(&meminfo);
cpu_init();
/*
* Set up various architecture-specific pointers
*/
init_machine = puv3_core_init;
#ifdef CONFIG_VT
#if defined(CONFIG_VGA_CONSOLE)
conswitchp = &vga_con;
#elif defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
#endif
#endif
early_trap_init();
}
static struct cpu cpuinfo_unicore;
static int __init topology_init(void)
{
int i;
for_each_possible_cpu(i)
register_cpu(&cpuinfo_unicore, i);
return 0;
}
subsys_initcall(topology_init);
#ifdef CONFIG_HAVE_PROC_CPU
static int __init proc_cpu_init(void)
{
struct proc_dir_entry *res;
res = proc_mkdir("cpu", NULL);
if (!res)
return -ENOMEM;
return 0;
}
fs_initcall(proc_cpu_init);
#endif
static int c_show(struct seq_file *m, void *v)
{
seq_printf(m, "Processor\t: UniCore-II rev %d (%s)\n",
(int)(uc32_cpuid >> 16) & 15, elf_platform);
seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
loops_per_jiffy / (500000/HZ),
(loops_per_jiffy / (5000/HZ)) % 100);
/* dump out the processor features */
seq_puts(m, "Features\t: CMOV UC-F64");
seq_printf(m, "\nCPU implementer\t: 0x%02x\n", uc32_cpuid >> 24);
seq_printf(m, "CPU architecture: 2\n");
seq_printf(m, "CPU revision\t: %d\n", (uc32_cpuid >> 16) & 15);
seq_printf(m, "Cache type\t: write-back\n"
"Cache clean\t: cp0 c5 ops\n"
"Cache lockdown\t: not support\n"
"Cache format\t: Harvard\n");
seq_puts(m, "\n");
seq_printf(m, "Hardware\t: PKUnity v3\n");
return 0;
}
static void *c_start(struct seq_file *m, loff_t *pos)
{
return *pos < 1 ? (void *)1 : NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
++*pos;
return NULL;
}
static void c_stop(struct seq_file *m, void *v)
{
}
const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
.show = c_show
};
arch/unicore32/kernel/setup.h 0 → 100644
View file @ 141c943f
/*
* linux/arch/unicore32/kernel/setup.h
*
* Code specific to PKUnity SoC and UniCore ISA
*
* Copyright (C) 2001-2010 GUAN Xue-tao
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __UNICORE_KERNEL_SETUP_H__
#define __UNICORE_KERNEL_SETUP_H__
extern void paging_init(void);
extern void puv3_core_init(void);
extern void puv3_ps2_init(void);
extern void pci_puv3_preinit(void);
extern void __init puv3_init_gpio(void);
extern void setup_mm_for_reboot(char mode);
extern char __stubs_start[], __stubs_end[];
extern char __vectors_start[], __vectors_end[];
extern void kernel_thread_helper(void);
extern void __init early_signal_init(void);
#endif
arch/unicore32/kernel/traps.c 0 → 100644
View file @ 141c943f
/*
* linux/arch/unicore32/kernel/traps.c
*
* Code specific to PKUnity SoC and UniCore ISA
*
* Copyright (C) 2001-2010 GUAN Xue-tao
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* 'traps.c' handles hardware exceptions after we have saved some state.
* Mostly a debugging aid, but will probably kill the offending process.
*/
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/spinlock.h>
#include <linux/personality.h>
#include <linux/kallsyms.h>
#include <linux/kdebug.h>
#include <linux/uaccess.h>
#include <linux/delay.h>
#include <linux/hardirq.h>
#include <linux/init.h>
#include <linux/uaccess.h>
#include <linux/atomic.h>
#include <linux/unistd.h>
#include <asm/cacheflush.h>
#include <asm/system.h>
#include <asm/traps.h>
#include "setup.h"
static void dump_mem(const char *, const char *, unsigned long, unsigned long);
void dump_backtrace_entry(unsigned long where,
unsigned long from, unsigned long frame)
{
#ifdef CONFIG_KALLSYMS
printk(KERN_DEFAULT "[<%08lx>] (%pS) from [<%08lx>] (%pS)\n",
where, (void *)where, from, (void *)from);
#else
printk(KERN_DEFAULT "Function entered at [<%08lx>] from [<%08lx>]\n",
where, from);
#endif
}
/*
* Stack pointers should always be within the kernels view of
* physical memory. If it is not there, then we can't dump
* out any information relating to the stack.
*/
static int verify_stack(unsigned long sp)
{
if (sp < PAGE_OFFSET ||
(sp > (unsigned long)high_memory && high_memory != NULL))
return -EFAULT;
return 0;
}
/*
* Dump out the contents of some memory nicely...
*/
static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
unsigned long top)
{
unsigned long first;
mm_segment_t fs;
int i;
/*
* We need to switch to kernel mode so that we can use __get_user
* to safely read from kernel space. Note that we now dump the
* code first, just in case the backtrace kills us.
*/
fs = get_fs();
set_fs(KERNEL_DS);
printk(KERN_DEFAULT "%s%s(0x%08lx to 0x%08lx)\n",
lvl, str, bottom, top);
for (first = bottom & ~31; first < top; first += 32) {
unsigned long p;
char str[sizeof(" 12345678") * 8 + 1];
memset(str, ' ', sizeof(str));
str[sizeof(str) - 1] = '\0';
for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
if (p >= bottom && p < top) {
unsigned long val;
if (__get_user(val, (unsigned long *)p) == 0)
sprintf(str + i * 9, " %08lx", val);
else
sprintf(str + i * 9, " ????????");
}
}
printk(KERN_DEFAULT "%s%04lx:%s\n", lvl, first & 0xffff, str);
}
set_fs(fs);
}
static void dump_instr(const char *lvl, struct pt_regs *regs)
{
unsigned long addr = instruction_pointer(regs);
const int width = 8;
mm_segment_t fs;
char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
int i;
/*
* We need to switch to kernel mode so that we can use __get_user
* to safely read from kernel space. Note that we now dump the
* code first, just in case the backtrace kills us.
*/
fs = get_fs();
set_fs(KERNEL_DS);
for (i = -4; i < 1; i++) {
unsigned int val, bad;
bad = __get_user(val, &((u32 *)addr)[i]);
if (!bad)
p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
width, val);
else {
p += sprintf(p, "bad PC value");
break;
}
}
printk(KERN_DEFAULT "%sCode: %s\n", lvl, str);
set_fs(fs);
}
static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
{
unsigned int fp, mode;
int ok = 1;
printk(KERN_DEFAULT "Backtrace: ");
if (!tsk)
tsk = current;
if (regs) {
fp = regs->UCreg_fp;
mode = processor_mode(regs);
} else if (tsk != current) {
fp = thread_saved_fp(tsk);
mode = 0x10;
} else {
asm("mov %0, fp" : "=r" (fp) : : "cc");
mode = 0x10;
}
if (!fp) {
printk("no frame pointer");
ok = 0;
} else if (verify_stack(fp)) {
printk("invalid frame pointer 0x%08x", fp);
ok = 0;
} else if (fp < (unsigned long)end_of_stack(tsk))
printk("frame pointer underflow");
printk("\n");
if (ok)
c_backtrace(fp, mode);
}
void dump_stack(void)
{
dump_backtrace(NULL, NULL);
}
EXPORT_SYMBOL(dump_stack);
void show_stack(struct task_struct *tsk, unsigned long *sp)
{
dump_backtrace(NULL, tsk);
barrier();
}
static int __die(const char *str, int err, struct thread_info *thread,
struct pt_regs *regs)
{
struct task_struct *tsk = thread->task;
static int die_counter;
int ret;
printk(KERN_EMERG "Internal error: %s: %x [#%d]\n",
str, err, ++die_counter);
sysfs_printk_last_file();
/* trap and error numbers are mostly meaningless on UniCore */
ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, \
SIGSEGV);
if (ret == NOTIFY_STOP)
return ret;
print_modules();
__show_regs(regs);
printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
if (!user_mode(regs) || in_interrupt()) {
dump_mem(KERN_EMERG, "Stack: ", regs->UCreg_sp,
THREAD_SIZE + (unsigned long)task_stack_page(tsk));
dump_backtrace(regs, tsk);
dump_instr(KERN_EMERG, regs);
}
return ret;
}
DEFINE_SPINLOCK(die_lock);
/*
* This function is protected against re-entrancy.
*/
void die(const char *str, struct pt_regs *regs, int err)
{
struct thread_info *thread = current_thread_info();
int ret;
oops_enter();
spin_lock_irq(&die_lock);
console_verbose();
bust_spinlocks(1);
ret = __die(str, err, thread, regs);
bust_spinlocks(0);
add_taint(TAINT_DIE);
spin_unlock_irq(&die_lock);
oops_exit();
if (in_interrupt())
panic("Fatal exception in interrupt");
if (panic_on_oops)
panic("Fatal exception");
if (ret != NOTIFY_STOP)
do_exit(SIGSEGV);
}
void uc32_notify_die(const char *str, struct pt_regs *regs,
struct siginfo *info, unsigned long err, unsigned long trap)
{
if (user_mode(regs)) {
current->thread.error_code = err;
current->thread.trap_no = trap;
force_sig_info(info->si_signo, info, current);
} else
die(str, regs, err);
}
/*
* bad_mode handles the impossible case in the vectors. If you see one of
* these, then it's extremely serious, and could mean you have buggy hardware.
* It never returns, and never tries to sync. We hope that we can at least
* dump out some state information...
*/
asmlinkage void bad_mode(struct pt_regs *regs, unsigned int reason)
{
console_verbose();
printk(KERN_CRIT "Bad mode detected with reason 0x%x\n", reason);
die("Oops - bad mode", regs, 0);
local_irq_disable();
panic("bad mode");
}
void __pte_error(const char *file, int line, unsigned long val)
{
printk(KERN_DEFAULT "%s:%d: bad pte %08lx.\n", file, line, val);
}
void __pmd_error(const char *file, int line, unsigned long val)
{
printk(KERN_DEFAULT "%s:%d: bad pmd %08lx.\n", file, line, val);
}
void __pgd_error(const char *file, int line, unsigned long val)
{
printk(KERN_DEFAULT "%s:%d: bad pgd %08lx.\n", file, line, val);
}
asmlinkage void __div0(void)
{
printk(KERN_DEFAULT "Division by zero in kernel.\n");
dump_stack();
}
EXPORT_SYMBOL(__div0);
void abort(void)
{
BUG();
/* if that doesn't kill us, halt */
panic("Oops failed to kill thread");
}
EXPORT_SYMBOL(abort);
void __init trap_init(void)
{
return;
}
void __init early_trap_init(void)
{
unsigned long vectors = VECTORS_BASE;
/*
* Copy the vectors, stubs (in entry-unicore.S)
* into the vector page, mapped at 0xffff0000, and ensure these
* are visible to the instruction stream.
*/
memcpy((void *)vectors,
__vectors_start,
__vectors_end - __vectors_start);
memcpy((void *)vectors + 0x200,
__stubs_start,
__stubs_end - __stubs_start);
early_signal_init();
flush_icache_range(vectors, vectors + PAGE_SIZE);
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7